The effect of adhesive systems on the pullout strength of a fiberglass-reinforced composite post system in bovine teeth

Purpose: To evaluate the pullout strength of a glass fiber-reinforced composite post (glass FRC) cemented with three different adhesive systems and one resin cement. The null hypothesis was that pullout strengths yielded by the adhesive systems are similar. Materials and Methods: Thirty bovine teeth were selected. The size of the specimens was standardized at 16 mm by sectioning off the coronal portion and part of the root. The specimens were divided into three groups, according to the adhesive system, which were applied following the manufacturers' instructions: G1, ScotchBond Multi-Purpose Plus; G2, Single Bond; G3, Tyrian SPE/One-Step Plus. The glass FRCs (Reforpost) were etched with 37% H3PO4 for 1 min and silanized (Porcelain Primer). Thereafter, they were cemented with the dual resin cement En-Force. The specimens were stored for 24 h, attached to an adapted device, and submitted to the pullout test in a universal testing machine (1 mm/min). The data were submitted to the one-way ANOVA and Tukey's test (α = 0.05). Results: G1 (30.2 ± 5.8 Kgf) displayed the highest pullout strength (p < 0.001) when compared to G2 (18.6 ± 5.8 Kgf) and G3 (14.3 ± 5.8 Kgf), which were statistically similar. Analysis of the specimens revealed that all failures occurred between the adhesive system and the root dentin (pullout of the post cement), regardless of group. Conclusion: The multiple-bottle, total-etch adhesive system provided higher pullout strength of the glass FRC when compared to the single-bottle, total-etch, and single-step self-etching adhesive systems. The null hypothesis was rejected (p < 0.001).

Influence of cavity preparation and curing method on the marginal seal of resin composite restorations: an in vitro evaluation.

OBJECTIVE: To evaluate the influence of cavity design and photocuring method on the marginal seal of resin composite restorations. METHOD AND MATERIALS: Seventy-two bovine teeth were divided into 2 groups: group 1 received box-type cavity preparations, and group 2 received plate-type preparations. Each group was divided into 3 subgroups. After etching and bonding, Z250 resin composite (3M Espe) was applied in 2 equal increments and cured with 1 of 3 techniques: (1) conventional curing for 30 seconds at 650 mW/cm2; (2) 2-step photocuring, in which the first step was performed 14 mm from the restoration for 10 seconds at 180 mW/cm2 and the second step was performed in direct contact for 20 seconds at 650 mW/cm2; or (3) progressive curing using Jetlite 4000 (J. Morita) for 8 seconds at 125 mW/cm2 and then 22 seconds at 125 mW/cm2 up to 500 mW/cm2. The specimens were thermocycled for 500 cycles and then submitted to dye penetration with a 50% silver nitrate solution. Microleakage was assessed using a stereomicroscope. Data were analyzed using analysis of variance and Tukey test (5% level of significance). RESULTS: A statistically significant difference was found between groups when a double interaction between photocuring and cavity preparation was considered (P = .029). CONCLUSIONS: No one type of cavity preparation or photocuring method prevented micro-leakage. The plate-type preparation showed the worst dye penetration when conventional and progressive photocuring methods were used. The best results were found using the 2-step photocuring with the plate-type preparation.

Temperature rise during adhesive and composite polymerization with different light-curing sources

AIM: This study evaluated the temperature rise of the adhesive system Single Bond (SB) and the composite resins Filtek Z350 flow (Z) and Filtek Supreme (S), when polymerized by light-emitting diode (LED XL 3000) and quartz-tungsten halogen (QTH Biolux). METHODS: Class V cavities (3 yen2 mm) were prepared in 80 bovine incisors under standardized conditions. The patients were divided as follows: G1: Control; G2: SB; G3: SB + Z; G4: SB + S. The groups were subdivided into two groups for polymerization (A: QTH, B: LED). Light curing was performed for 40 s and measurement of temperature changes during polymerization was performed with a thermocouple positioned inside the pulp chamber. Data were statistically analyzed using ANOVA and Tukey tests. RESULTS: The factors material (P<0.00001) and curing unit (P<0.00001) had significant influence on temperature rise. The lowest temperature increase (0.15 degrees C) was recorded in G2 B and the highest was induced in G1 A (0.75 degrees C, P<0.05). In all groups, lower pulp chamber temperature measurements were obtained when using LED compared to QTH (P<0.05). CONCLUSION: QTH caused greater increases in tooth temperature than LED. However, both sources did not increase pulpal temperature above the critical value that may cause pulpal damage.

Fracture resistance of composite resin cores with or without prefabricated posts over different substrates

The fracture resistance of endodontically treated teeth has been an obstacle to the durability of the remaining teeth and restorations. The aim of this study was to evaluate the fracture resistance of endodontically treated bovine and human teeth that were restored with either prefabricated metal posts, glass fiber posts, or composite resin cores. Statistical analysis revealed significant difference between different substrates, but there was no statistically significant difference between different types of intraradicular posts or in the interaction between substrate and post types. The intraradicular posts do not increase the fracture resistance of endodontically treated teeth. The metal posts presented more unfavorable fracture modes when compared to glass fiber posts and composite resin cores.

Effects of vaccination against reproductive diseases on reproductive performance of beef cows submitted to fixed-timed AI in Brazilian cow-calf operations

The objectives were to assess incidence of pregnancy losses, associate this outcome with immunization programs against reproductive diseases, and evaluate the effects of vaccination against bovine herpesvirus-1 (BoHV-1), bovine viral diarrhea virus (BVDV), and Leptospira spp., on reproductive efficiency of Brazilian cow-calf operations. In experiment 1, 7614 lactating Nelore cows from 18 ranches were assigned to the same estrus synchronization and fixed-time AI protocol (ESFTAI; Days -11 to 0). Pregnancy status was determined with transrectal ultrasonography on Days 30 and 120 after AI. Pregnancy loss was deemed to have occurred when cows were pregnant on Day 30 but nonpregnant on Day 120. Incidence of pregnancy loss across all ranches was 4.1%; pregnancy losses were detected (P < 0.10) in 14 ranches but not detected (P > 0.11) in four ranches. Pregnancy loss was lower (P ≤ 0.02) in ranches that vaccinated against BoHV-1, BVDV, and Leptospira spp. compared with ranches that did not vaccinate, or only vaccinated against Leptospira spp. In experiments 2 and 3, lactating Nelore cows (N = 1950 and 2793, respectively) from ranches that did not have a history of vaccinating against reproductive diseases (experiment 2), or only vaccinated against Leptospira spp. (experiment 3), were assigned to the same ESFTAI used in experiment 1. Within each ranch, cows received (VAC) or not (CON) vaccination against BoHV-1, BVDV, and Leptospira spp. at the beginning of the ESFTAI (Day -11) and 30 days after (Day 41) AI. In experiment 2, VAC cows had greater (P ≤ 0.05) pregnancy rates compared with CON on Days 30 and 120. In experiments 2 and 3, pregnancy loss was reduced (P ≤ 0.03) in primiparous VAC cows compared with CON cohorts. In experiment 4, 367 primiparous, lactating Nelore cows previously vaccinated against Leptospira spp. were assigned to the same ESFTAI used in experiment 1. Cows received VAC, or the same vaccine 30 days before (Day -41) and at the beginning (Day -11) of the ESFTAI (PREVAC). Pregnancy rates on Days 30 and 120 were greater (P ≤ 0.05) in PREVAC cows compared with VAC cows. In conclusion, pregnancy losses affected reproductive and overall efficiency of Brazilian cow-calf operations, and might be directly associated with BoHV-1, BVDV, and Leptospira spp. infections. Hence, vaccinating cows against these pathogens, particularly when both doses are administered before fixed-time AI, improved reproductive performance in Brazilian cow-calf systems. © 2013 Elsevier Inc.

Estudo genético quantitativo da qualidade da carcaça e da carne e suas associações com as características de avaliação visual na raça Nelore

Pós-graduação em Genética e Melhoramento Animal - FCAV

Accuracy of genomic predictions in Bos indicus (Nellore) cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A diet enriched in linoleic acid compromises the cryotolerance of embryos from superovulated beef heifers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lipid sources with different fatty acid profile alters the fatty acid profile and quality of beef from confined nellore steers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Low levels of taurine introgression in the current Brazilian Nelore and Gir indicine cattle populations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Manifestation of estrous behavior and subsequent progesterone concentration at timed-embryo transfer in cattle are positively associated with pregnancy success of recipients

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Meat characteristics of nellore cattle fed different levels of lipid-based diets

The objective of this study was to determine the effect of the dietary inclusion of lipid-based diets (whole cottonseed and protected fat) on the centesimal composition, fatty acid profile, and sensory properties of meat from finishing Nellore cattle. The study was carried out from August to October 2009. Thirty nine uncastrated Nellore males with average initial body weight of 494.1 ± 10.1 kg and 36 months of age were housed for 63 days in pens with thirteen animals each. A completely randomized design with three treatments and thirteen replications was used. The treatments evaluated were: feed with 2.50% cottonseed (control diet); feed with 11.50% cottonseed; and feed with 3.13% cottonseed added of protected lipid (PL), all on a dry matter basis. No differences between treatments were observed for moisture, protein, and ash contents. However, the addition of protected fat caused an increase in the percentage of ether extract in the meat. Diets containing cottonseed or protected lipid did not affect fatty acid concentration in the meat. The intensity of the aroma, strange aroma, flavor, strange flavor, juiciness, color, and overall appearance were similar between treatments, except for tenderness, which was positively affected in cattle fed a diet in which the only lipid source was cottonseed. The study demonstrated that the addition of PL in the diets of finishing cattle led to greater levels of intramuscular fat, but to less tender meat than the other treatments.

Environmental and Farm Management Factors Associated with Tuberculosis on Cattle Farms in Northeastern Michigan

Objective—To identify major environmental and farm management factors associated with the occurrence of tuberculosis (TB) on cattle farms in northeastern Michigan. Design—Case-control study. Sample Population—17 cattle farms with infected cattle and 51 control farms. Procedure—Each case farm (laboratory confirmed diagnosis of Mycobacterium bovis infection) was matched with 2 to 4 control farms (negative whole-herd test results within previous 12 months) on the basis of type of farm (dairy or beef) and location. Cattle farm data were collected from in-person interviews and mailed questionnaires. Wildlife TB data were gathered through state wildlife surveillance. Environmental data were gathered from a satellite image-based geographic information system. Multivariable conditional logistic regression for matched analysis was performed. Results—Major factors associated with increased farm risk of TB were higher TB prevalence among wild deer and cattle farms in the area, herd size, and ponds or creeks in cattle housing areas. Factors associated with reduced farm risk of TB were greater amounts of natural open lands in the surrounding area and reducing deer access to cattle housing areas by housing cattle in barns, barnyards, or feedlots and use of electrified wire or barbed wire for livestock fencing. Conclusions and Clinical Relevance—Results suggest that certain environmental and management factors may be associated with risk of TB on cattle farms.

RB30-252 Sex and Age as Factors in Cattle Feeding

Varying economic conditions and changes in the demands of the meat consuming public have been responsible for the turns that have taken place in the beef industry during recent years. Both feeder and producer must recognize and conform to these changes if they are to continue in business. Among the most important of these changes have been the turn toward the marketing of lighter cattle and the gradual disappearance from feed lots of two- and three-year-old animals. Furthermore, the cattle population of the United States is fast reaching stabilization with the resulting effect that more heifers are being marketed, since only one-fourth of the heifer crop is needed to replace worn-out breeding animals. Realizing the increasing importance of the heifer problem from the standpoint of the producer, feeder, and consumer, the Nebraska Experiment Station undertook to compare steers and heifers in a series of trials both in the feedlot and in the beef. It was hoped that these experiments would yield results which would bring out existing differences, if any, between steers and heifers both in quality and quantity of beef produced and thus provide or disprove many of the complaints against heifers. The results of these trials are summarized in this bulletin. Age as well as the sex factor has been considered, since two-year-olds, yearlings, and calves were included in these trials.