Investigation of the CO tolerance mechanism at several Pt-based bimetallic anode electrocatalysts in a PEM fuel cell

The electrocatalysis of CO tolerance of Pt/C, PtRu/C, PtFe/C, PtMo/C, and PtW/C at a PEM fuel cell anode has been investigated using single cell polarization and online electrochemical mass spectrometry (EMS) measurements, and cyclic voltammetry, X-ray diffraction (XRD), in situ X-ray absorption near edge structure (XANES) analyses of the electrocatalysts. For all bimetallic electrocatalysts, which presented higher CO tolerance, EMS results have shown that the production of CO(2) start at lower hydrogen electrode overpotentials as compared to Pt/C, confirming the occurrence of the so-called bifunctional mechanism. On the other hand, XANES results indicate an increase in the Pt 5d-band vacancies for the bimetallic catalysts, particulary for PtFe/C, this leading to a weakening of the Pt-CO bond, helping to increase the CO tolerance (the so-called electronic effect). For PtMo/C and PtRu/C supplied with H(2)/CO, the formation of CO(2) is observed even when the cell is at open circuit, confirming some elimination of CO by a chemical process, most probably the water gas shift reaction. (C) 2008 Elsevier Ltd. All rights reserved.

Stoichiometry and thermodynamics of the interaction between the C-terminus of human 90 kDa heat shock protein Hsp90 and the mitochondrial translocase of outer membrane Tom70

A large majority of the 1000-1500 proteins in the mitochondria are encoded by the nuclear genome, and therefore, they are translated in the cytosol in the form and contain signals to enable the import of proteins into the organelle. The TOM complex is the major translocase of the outer membrane responsible for preprotein translocation. It consists of a general import pore complex and two membrane import receptors, Tom20 and Tom70. Tom70 contains a characteristic TPR domain, which is a docking site for the Hsp70 and Hsp90 chaperones. These chaperones are involved in protecting cytosolic preproteins from aggregation and then in delivering them to the TOM complex. Although highly significant, many aspects of the interaction between Tom70 and Hsp90 are still uncertain. Thus, we used biophysical tools to study the interaction between the C-terminal domain of Hsp90 (C-Hsp90), which contains the EEVD motif that binds to TPR domains, and the cytosolic fragment of Tom70. The results indicate a stoichiometry of binding of one monomer of Tom70 per dimer of C-Hsp90 with a K(D) of 360 30 nM, and the stoichiometry and thermodynamic parameters obtained suggested that Tom70 presents a different mechanism of interaction with Hsp90 when compared with other TPR proteins investigated. (C) 2011 Elsevier Inc. All rights reserved.

Experimental and computational investigation of the roll forming process

One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. There are several computer aided engineering systems on the market that can assist the tool designing process. These include more or less simple formulas to predict deformation during forming as well as the number of forming steps. In recent years it has also become possible to use finite element analysis for the design of roll forming processes. The objective of the work presented in this thesis was to answer the following question: How should the roll forming process be designed for complex geometries and/or high strength steels? The work approach included both literature studies as well as experimental and modelling work. The experimental part gave direct insight into the process and was also used to develop and validate models of the process. Starting with simple geometries and standard steels the work progressed to more complex profiles of variable depth and width, made of high strength steels. The results obtained are published in seven papers appended to this thesis. In the first study (see paper 1) a finite element model for investigating the roll forming of a U-profile was built. It was used to investigate the effect on longitudinal peak membrane strain and deformation length when yield strength increases, see paper 2 and 3. The simulations showed that the peak strain decreases whereas the deformation length increases when the yield strength increases. The studies described in paper 4 and 5 measured roll load, roll torque, springback and strain history during the U-profile forming process. The measurement results were used to validate the finite element model in paper 1. The results presented in paper 6 shows that the formability of stainless steel (e.g. AISI 301), that in the cold rolled condition has a large martensite fraction, can be substantially increased by heating the bending zone. The heated area will then become austenitic and ductile before the roll forming. Thanks to the phenomenon of strain induced martensite formation, the steel will regain the martensite content and its strength during the subsequent plastic straining. Finally, a new tooling concept for profiles with variable cross-sections is presented in paper 7. The overall conclusions of the present work are that today, it is possible to successfully develop profiles of complex geometries (3D roll forming) in high strength steels and that finite element simulation can be a useful tool in the design of the roll forming process.

Transparent Fault Tolerance for Web Services based Architectures

Service-based architectures enable the development of new classes of Grid and distributed applications. One of the main capabilities provided by such systems is the dynamic and flexible integration of services, according to which services are allowed to be a part of more than one distributed system and simultaneously serve different applications. This increased flexibility in system composition makes it difficult to address classical distributed system issues such as fault-tolerance. While it is relatively easy to make an individual service fault-tolerant, improving fault-tolerance of services collaborating in multiple application scenarios is a challenging task. In this paper, we look at the issue of developing fault-tolerant service-based distributed systems, and propose an infrastructure to implement fault tolerance capabilities transparent to services.

Interactions of Electrons and Rydberg Atoms in Ultra-Cold Plasmas

This thesis discusses an experimental technique for investigating electron temperature control by Rydberg atoms in ultra-cold plasmas. The objective we set ourselves was twofold. Firstly, we sought to gain an insight into the processes whereby the creation of Rydberg atoms within the plasma lengthens the lifetime of the plasma. To this end, we created the plasma using a Littman dye laser and subsequently, at a variable time delay, we excited neutral atoms in the plasma to specific Rydberg states using a narrow bandwidth pulsed dye laser. Secondly, we employed radio-frequency (rf) electric fields to excite electron oscillations within the plasma in order to infer such information as plasma density and electron temperature. Although we found that the introduction of high angular momentum Rydberg states did lengthen the plasma lifetime we were not able to differentiate between the temperature moderation effect due to the Rydberg atoms cooling the plasma, and the binding effect due to an increased positive space charge within the plasma.

An Injection-locked Diode Laser for Cold Rydberg Atom Experiments

A free-running, temperature stabilized diode laser has been injection-locked to an external cavity diode laser for use in cold Rydberg atom experiments. Cold rubidium atoms in a magneto-optical trap (MOT) are excited to Rydberg states using a 10 ns laser pulse. The Rydberg atoms spontaneously ionize due to dipole forces, and the collisional ionization dynamics are observed as a function of atom density and principal quantum number of the Rydberg state, n. The injection-locked diode laser will be used as a repumper in conjunction with a dark spontaneous-force optical trap (SPOT) to increase the Rydberg state density. We report on the design of the injection-locked laser system.

Expressão gênica dos receptores toll-símele e sua relação com citocinas potencialmente envolvidas em lesão de reperfusão durante a fase inicial do transplante pulmonar em humanos

Introdução: Imunidade inata é a primeira linha de defesa do hospedeiro contra microorganismos invasores, a qual é mediada por moléculas específicas que reconhecem patógenos, chamadas receptores toll-símile (TLRs). Os TLRs são também capazes de reconhecer ligantes endógenos, tais como conteúdos de células necróticas e proteínas de choque térmico (HSP), resultando na produção de citocinas e ativação do sistema imune adquirido. A função exata dos TLRs ainda é pouco entendida em transplante de órgãos. No entanto, tem sido sugerido que eles podem estar envolvidos na rejeição aguda ou crônica e atuar na resposta do enxerto a lesão por isquemia e reperfusão. Objetivo: Examinar as alterações na expressão gênica dos TLRs durante a fase inicial do transplante pulmonar em humanos e sua relação com citocinas potencialmente envolvidas na lesão por isquemia e reperfusão em transplante de órgãos. Métodos: Foram analisadas biópsias pulmonares de 14 pacientes submetidos a transplante pulmonar (LTx). Estas amostras foram coletadas no final do período de isquemia fria (TIF, n=14), no final do período de isquemia quente (TIQ, n=13),1 hora (n=12) e 2 horas (n=8) após a reperfusão do enxerto. RNA total foi isolado a partir de tecido pulmonar e os níveis de RNA mensageiro (mRNA) dos TLRs (1-10) bem como citocinas (IL-8, IL-6, IL-10, IFN-γ, IL-1β) e proteína de choque térmico 70 (HSP70) foram medidos por reação em cadeia pela polimerase em tempo real. Resultados: Foi detectada a expressão de mRNA de todos TLRs em tecido pulmonar. Nas amostras no TIF, os níveis de mRNA dos TLRs apresentaram-se com diferentes expressões gênicas. Os níveis de expressão dos TLRs, com exceção para o TLR3, estavam altamente correlacionados entre si no TIF e com os níveis de mRNA de IFN-γ, IL-10 e IL-1β e menos significativamente com os níveis de IL-6 e IL-8. Houve diminuição dos níveis de mRNA na grande maioria dos TLRs após reperfusão, o que foi diferente para a maioria das citocinas e HSP70, que apresentaram tendência a aumentar após transplante. A expressão gênica de TLR4 apresentou-se correlacionada com os níveis de IL-8 e IL-1β antes e após transplante (P<0.05). Pulmões de doadores que foram intubados por períodos acima de 72 horas (n=5) apresentaram níveis mais elevados de TLR2 e TLR10 (P<0.05). Conclusão: Pela primeira vez, foi demonstrado que a expressão dos TLRs altera-se durante o período de isquemia e reperfusão em transplante pulmonar em humanos. O tempo de intubação dos doadores pulmonares pode influenciar a expressão de receptores Toll-símile específicos. A correlação entre TLR4 e IL-8/IL-1β sugere que os TLRs pulmonares podem ter alguma função na resposta precoce do enxerto.

Métodos para detecção de outliers em séries de preços do índice de preços ao consumidor

Outliers são observações que parecem ser inconsistentes com as demais. Também chamadas de valores atípicos, extremos ou aberrantes, estas inconsistências podem ser causadas por mudanças de política ou crises econômicas, ondas inesperadas de frio ou calor, erros de medida ou digitação, entre outras. Outliers não são necessariamente valores incorretos, mas, quando provenientes de erros de medida ou digitação, podem distorcer os resultados de uma análise e levar o pesquisador à conclusões equivocadas. O objetivo deste trabalho é estudar e comparar diferentes métodos para detecção de anormalidades em séries de preços do Índice de Preços ao Consumidor (IPC), calculado pelo Instituto Brasileiro de Economia (IBRE) da Fundação Getulio Vargas (FGV). O IPC mede a variação dos preços de um conjunto fixo de bens e serviços componentes de despesas habituais das famílias com nível de renda situado entre 1 e 33 salários mínimos mensais e é usado principalmente como um índice de referência para avaliação do poder de compra do consumidor. Além do método utilizado atualmente no IBRE pelos analistas de preços, os métodos considerados neste estudo são: variações do Método do IBRE, Método do Boxplot, Método do Boxplot SIQR, Método do Boxplot Ajustado, Método de Cercas Resistentes, Método do Quartil, do Quartil Modificado, Método do Desvio Mediano Absoluto e Algoritmo de Tukey. Tais métodos foram aplicados em dados pertencentes aos municípios Rio de Janeiro e São Paulo. Para que se possa analisar o desempenho de cada método, é necessário conhecer os verdadeiros valores extremos antecipadamente. Portanto, neste trabalho, tal análise foi feita assumindo que os preços descartados ou alterados pelos analistas no processo de crítica são os verdadeiros outliers. O Método do IBRE é bastante correlacionado com os preços alterados ou descartados pelos analistas. Sendo assim, a suposição de que os preços alterados ou descartados pelos analistas são os verdadeiros valores extremos pode influenciar os resultados, fazendo com que o mesmo seja favorecido em comparação com os demais métodos. No entanto, desta forma, é possível computar duas medidas através das quais os métodos são avaliados. A primeira é a porcentagem de acerto do método, que informa a proporção de verdadeiros outliers detectados. A segunda é o número de falsos positivos produzidos pelo método, que informa quantos valores precisaram ser sinalizados para um verdadeiro outlier ser detectado. Quanto maior for a proporção de acerto gerada pelo método e menor for a quantidade de falsos positivos produzidos pelo mesmo, melhor é o desempenho do método. Sendo assim, foi possível construir um ranking referente ao desempenho dos métodos, identificando o melhor dentre os analisados. Para o município do Rio de Janeiro, algumas das variações do Método do IBRE apresentaram desempenhos iguais ou superiores ao do método original. Já para o município de São Paulo, o Método do IBRE apresentou o melhor desempenho. Em trabalhos futuros, espera-se testar os métodos em dados obtidos por simulação ou que constituam bases largamente utilizadas na literatura, de forma que a suposição de que os preços descartados ou alterados pelos analistas no processo de crítica são os verdadeiros outliers não interfira nos resultados.

Why merger talks collapse: an exploratory study about contributing factors to ‘wedding cold feet' and deal making failure in mergers and acquisitions from the perspective of active deal making professionals in Brazil

Why merger talks collapse: an exploratory study about contributing factors behind ‘wedding cold feet' and deal making failure in Mergers and Acquisitions from the perspective of active deal making professionals in Brazil. One basic question encouraged this study: after all the effort, expectations and money usually invested in dealmaking, why are so many transactions simply abandoned, even when the benefits are clear for the business, shareholders, customers and employees?

Variação no conteúdo protéico e pigmentar em variantes cromáticas de Gracilaria domingensis nas populações naturais de Rio do Fogo-RN, BRASIL

The seaweed Gracilaria domingensis is a common species in the coast of Rio Grande do Norte. This species lives in the intertidal zone, where colour strains (red, green and brown) co-occur during the whole year. Seaweeds that live in this region are exposed to daily changes and to the rhythm of the tide. During the low tide they are exposed to dissection, hiper-or hipo-osmotic shock, high temperatures and high irradiance. The aim of this study was to analyze whether the pigment and protein content of the colour strains of G. domingensis is affected by some environmental parameters in a temporal scale. The seaweeds were collected during 10 months in the seashore of Rio do Fogo (RN). The total soluble proteins and the phycobiliprotein were extracted in phosphate buffer and the carotenoids were analyzed by a standardized method through HPLC-UV. The pigments analysis showed that phycoerithrin is the most abundant pigment in the three strains. This pigment was strongly correlated with nitrogen and the photosynthetically active radiation. Chlorophyll presented higher concentrations than carotenoids during the whole, but the ratio carotenoid/chlorophyll-a was modified by incident radiation. The most abundant carotenoid was ß-carotene and zeaxanthin, which had higher concentrations in the higher radiation months. The concentration increase of zeaxanthin in this period indicated a photoprotective response of the seaweed. The three strains presented a pigment profile that indicates different radiation tolerance profile. Our results pointed that the green strain is better adapted to high irradiance levels than the red and brown strains

Processo biotecnológico voltado a produção de estoques poliploides do camarão-branco litopenaeus vannamei (decapoda, penaeidae)

without practical results so far. Protocols used in biotechnological cultured aquatic organisms aimed at increasing growth rates and disease resistance, have been studied and perfected. Among the available techniques, the application of chromosomal manipulation, although still nascent, is presented as a tool aimed at mitigating ecological and economical issues in shrimp farming. The polyploidization artificial method already employed in fish and shellfish, has been widely researched for use in farmed shrimp. Some limitations of this method of expansion in shrimp refer to a better knowledge of cytogenetic aspects, the level of sexual dimorphism and performance in growing conditions. To contribute on some of these issues, the present study aimed to characterize cytogenetic species Litopenaeus vannamei (Decapoda) and Artemia franciscana (Anostraca), analyze the effectiveness of methods for detection of ploidy, through the use of flow cytometry in processes of induction polyploidy cold thermal shock at different stages of development of newly fertilized eggs. Additionally, aimed also the qualitative and quantitative comparison of larval development between diploid and polyploid organisms, besides the identification of sexual dimorphism in L. vannamei, through geometric morphometrics. The results provide information relevant to the improvement and widespread use of biotechnological methods applied toward national productivity in shrimp farming

Circulating leukocyte heat shock protein 70 (HSP70) and oxidative stress markers in rats after a bout of exhaustive exercise

A novel method to measure oxidative stress resulting from exhaustive exercise in rats is presented. In this new procedure we evaluated the erythrocyte antioxidant enzymes, catalase ( CAT) and glutathione reductase (GR), the plasma oxidative attack markers, reactive carbonyl derivatives (RCD) and thiobarbituric reactive substances (TBARS). Muscular tissue damage was evaluated by monitoring plasma creatine kinase (CK) and plasma taurine ( Tau) concentrations. Also, we monitored total sulphydryl groups (TSG) and uric acid (UA), and the level of the 70 kDa heat shock protein (HSP70) in leukocytes as a marker of oxidative stress. In the study we found a correspondence between erythrocyte CAT and GR activities and leukocyte HSP70 levels, principally 3 h after the acute exercise, and this suggested an integrated mechanism of antioxidant defense. The increase in levels of plasma Tau was coincident with the increasing plasma levels of CK and TBARS, principally after two hours of exercise. Thus tissue damage occurred before the expression of any anti-oxidant system markers and the monitoring of Tau, CK or TBARS may be important for the estimation of oxidative stress during exhaustive exercise. Furthermore, the integrated analyses could be of value in a clinical setting to quantify the extent of oxidative stress risk and reduce the need to perform muscle biopsies as a tool of clinical evaluation.

Effects of hot and cold smoking processes on organoleptic properties, yield and composition of matrinxa fillet

Foi avaliado o efeito do processo de defumação a quente (45-90ºC/5 horas) e a frio (27-45ºC/10 horas) nas propriedades organolépticas, no rendimento e na composição dos filés de matrinxã (Brycon cephalus). Não houve diferença significativa no rendimento de filés defumados e não-defumados. As perdas no processo de defumação foram significativamente maiores para defumação a quente (19,37%) em comparação à defumação a frio (17,08%). O processo de defumação reduziu a umidade (in natura = 72,91%; defumado a quente = 58,51%; e defumado a frio = 59,68%) e aumentou os teores de proteína bruta, lipídios e cinzas. Houve diferença significativa somente nos teores de proteína no defumado a quente (28,07%) e defumado a frio (27,14%). O processo a frio resultou em melhor aparência e cor de filé, enquanto o processo a quente melhorou o sabor, o teor de sal e a aparência geral. O aroma e a textura não diferiram significativamente entre os processos. O processo de defumação a quente melhora as propriedades organolépticas e os níveis de proteína do filé de matrinxã.