Desempenho produtivo da tilápia do nilo em tanques-rede numa represa pública: modelo empírico de classificação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of activation on the multipoint immobilization of penicillin G acylase on macroporous silica

Penicillin G acylase is the second most important enzyme used by industry in an immobilized form. Penicillin hydrolysis is its main application. This reaction is used to produce 6-aminopenicillanic acid (6-APA), an intermediate in the synthesis of semisynthetic antibiotics. This work aims to compare catalytic properties of different penicillin G acylase (PGA) derivatives obtained by multipoint immobilization of the enzyme on macroporous silica. Enzyme amino groups react with different aldehyde groups produced in the support using either glutaraldehyde or glyoxyl activation. In the former method, silica reacts with g-aminopropyltriethoxysilane (g-APTS) and glutaraldehyde; in the latter, a reaction with glycidoxypropyltrimethoxysilane (GPTMS) is followed by acid hydrolysis and oxidation using sodium periodate. This work determines the influence of degree of activation, using glutaraldehyde, on immobilization parameters. PGA was immobilized on these two different supports. Maximum enzyme load, immobilized enzyme activity (derivative activity), rate of immobilization and thermal stability were checked for both cases. For glutaraldehyde activation, the results showed that 0.5% of the g-APTS is sufficient for all the hydroxyl groups in the silica to react. They also showed that degree of activation only affects immobilization yield and reaction velocity and that reduction of the glutaraldehyde derivatives with sodium borohydride does not affect their thermal stability. In comparing the derivatives obtained using glyoxyl and glutaraldehyde activation, it was observed that the glyoxyl derivatives presented better immobilization parameters, with a maximum enzyme load of 264 IU/g silica and a half-life of 20 minutes at 60 °C.

Fatores determinantes da carga de trabalho em uma unidade básica de saúde

As doenças decorrentes do exercício pro-fissional, sejam de ordem física ou emocional, têm apresentado aumento crescente na sociedade atual, nos diferentes segmentos laborativos, com projeção significativa junto aos profissionais da saúde como médicos, dentistas, enfermeiros, auxiliares de enfermagem e auxiliares administrativos envolvidos com a prestação de serviços nas unidades de saúde. Este estudo teve por objetivo conhecer a carga de trabalho e seus fatores determinantes, buscando identificar possíveis relações entre as condições de trabalho e o possível impacto para a saúde dos trabalhadores. Participaram da amostra 31 indivíduos: 12 médicos, 3 dentistas, 1 enfermeira, 9 auxiliares de enfermagem, 3 auxiliares odontológicos e 3 auxiliares administrativos de uma Unidade Básica de Saúde (UBS) no interior de São Paulo. Para a coleta dos dados foi elaborado um roteiro de entrevista estruturado e realizadas reuniões com os grupos específicos para uma descrição detalhada das atividades realizadas em cada setor e o levantamento de problemas e de características desejáveis. Os resultados indicam a presença de carga física, carga cognitiva e carga psíquica; processo de comunicação inadequado; equipamentos obsoletos; número excessivo de usuários e estrutura frágil para lidar com absenteísmo.

Correlações entre os níveis de L-carnitina plasmática, o estado nutricional e a função ventilatória de portadores de doença pulmonar obstrutiva crônica

OBJETIVO: Avaliar os níveis de L-carnitina livre no plasma, o estado nutricional, a função pulmonar e a tolerância ao exercício em pacientes com doença pulmonar obstrutiva crônica e verificar as correlações entre a composição corporal e as frações de L-carnitina no plasma. MÉTODOS: Quarenta pacientes entre 66,2±9 anos, com diagnóstico clínico de doença pulmonar obstrutiva crônica, foram divididos em dois grupos: G1, com índice de massa corporal menor que 20kg/m², e G2, com índice de massa corporal maior que 20kg/m². Foram mensurados os parâmetros espirométricos, a tolerância ao exercício no teste de caminhada, a força muscular respiratória, a composição corporal por meio da impedância bioelétrica e as dosagens da L-carnitina plasmática, através de amostras de sangue. RESULTADOS: Foram observados menores valores das variáveis espirométricas (p<0,01), da força muscular respiratória e dos níveis de L-carnitina nos pacientes do G1; porém, não houve diferença entre os grupos quanto à capacidade de realizar exercício físico dinâmico de baixa intensidade. Correlações significativas entre o percentual de gordura e os níveis de L-carnitina plasmática foram observadas nos pacientes (r=0,53 com p<0,002); sendo que, nos pacientes com índice de massa corporal menor que 18kg/m², essa relação aumentou (r<0,73 com p<0,01). CONCLUSÃO: Na doença pulmonar obstrutiva crônica, a desnutrição está associada tanto aos prejuízos da função pulmonar e da força muscular respiratória, quanto aos baixos níveis de L-Carnitina plasmática.

Composição centesimal da carne de cordeiros Santa Inês puros e de seus mestiços com Texel abatidos com diferentes pesos

Objetivou-se avaliar a composição centesimal da carne de cordeiros da raça Santa Inês (SI x SI) e de seus mestiços com Texel (T x SI), abatidos com diferentes pesos vivos. O músculo biceps femoris foi utilizado para as análises de umidade, de proteína bruta (PB), de extrato etéreo (EE) e de cinzas. O delineamento foi inteiramente casualizado, com 16 tratamentos, em esquema fatorial 2x2x4, com dois grupos genéticos, dois sexos (14 machos e 13 fêmeas em cada grupo) e quatro pesos de abate (15, 25, 35 e 45 kg PV), sendo os dados analisados com auxílio Proc GLM do programa estatístico SAS. A umidade diminuiu com o peso de abate, variando de 76,09 a 74,31%, e os machos apresentaram valores maiores em relação às fêmeas. A PB teve comportamento quadrático, variando de 20,27 a 21,36%. Com o aumento do peso de abate, o teor de EE elevou, variando de 0,95 a 3,78%, sendo que SI x SI tiveram maior teor de EE. Os machos, de ambos os grupamentos genéticos, tiveram menor teor de extrato etéreo. Houve declínio do teor de cinzas com o avanço do peso, e as fêmeas apresentaram os maiores valores. Conclui-se que o peso de abate alterou a composição centesimal da carne de cordeiros, de modo que os animais mais pesados apresentaram menor teor de umidade e de cinzas e maior teor de EE. O sexo e o grupo genético influenciaram o teor de EE, indicando a possibilidade de abate em pesos diferentes, conforme o sexo e a raça.

The use of Langmuir-Blodgett films of a perylene derivative and polypyrrole in the detection of trace levels of Cu2+ ions

Langmuir films of a tetracarboxylic perylene derivative and polypyrrole display condensed surface pressure isotherms that are shifted when Cu2+ ions are added to the ultrapure water subphase. These films were transferred onto interdigitated gold electrodes leading to Y-type Langmuir-Blodgett (LB) films. The electrodes modified with 5-layer LB films were immersed into a flask with ultrapure water and water containing Cu2+ ions at concentrations ranging from mM to muM. Impedance measurements indicated a distinct electrical response for the two types of films. Although the materials chosen have no specificity for ionic metals, they can be combined for detecting trace levels of Cu2+, which may be exploited in water quality monitoring. (C) 2004 Elsevier B.V. All rights reserved.

NONLINEAR SCALAR COUPLING MODELS AND PROTON-NUCLEUS SCATTERING OBSERVABLES

The effects of nonlinear scalar field couplings on elastic proton-nucleus scattering observables are investigated using a relativistic impulse approximation. Nonlinear couplings affect in a nontrivial way the effective nucleon mass and the nuclear scalar and vector densities. Modifications on the densities might have observable consequences on scattering observables. Our investigation indicates that the description of the observables for the reactions p-O-16 and p-Ca-40 at 200 MeV are not greatly modified with the use of nonlinear models in comparison with the description using linear models.

Fluorescence study of the interaction between metal ions and methyl methacrylate methacrylic acid copolymers in aqueous solutions: thallium(I), calcium(II), and terbium(III)

The binding of the cations thallium(I), calcium(II) and terbium(III) to methyl methacrylate-methacrylic acid copolymers with different fractions of acid groups (x) has been studied in aqueous solution at, various pH values using the fluorescence of covalently bonded 9-vinyl anthracene as a probe. In all cases, the extent of binding increases as a function of the charge of the polymer with either increasing fraction of carboxylic acids or of pH. However, differences are observed in the behavior of the three cations, With Tl(I), quenching of the anthracene group fluorescence is observed. indicating that the thallium(I) approaches the probe and suggesting that the alkylanthracene is probably in a relatively polar region. Binding constants have been determined from anthracene quenching data and from studies with the fluorescent-probe sodium pyrenetetrasulfonate, Good agreement is obtained between the two methods, and values for the binding constants increase from 250 to 950 M-1 as x increases from 0.39 to 1. It is suggested that the cation is held in the polyelectrolyte domain, partly by Debye-Huckel effects and partly by more specific interactions. Stronger binding is found with calcium(II) and terbium(III), and in this case increases in fluorescence intensity are observed on complexation due to the anthracene group being in a more hydrophobic region, probably as a result of conformational changes in the polymer chain. In the former case the stoichiometry of the interaction was determined from the fluorescence data to involve two carboxylate groups bound per calcium. Association constants were found using murexide as an indicator of free calcium to vary from 8400 to 37 000 M-1 as x increases from 0.39 to 1. It is suggested that in this case specific calcium(II)-carboxylate interactions contribute to the binding. With terbium(III), a greater increase in the probe fluorescence intensity was observed than with calcium, and it is suggested that the interaction with the polymer is even stronger, leading to a more pronounced conformational change in the polymer. It is proposed that the terbium(III) interacts with sis carboxylic groups on the polymer chain, with three being coordinated and three attracted by electrostatic interactions.

Influence of temperature on the properties of the xylanolytic enzymes of the thermotolerant fungus Aspergillus phoenicis

This study reports on the effects of growth temperature on the secretion and some properties of the xylanase and beta-xylosidase activities produced by a thermotolerant Aspergillus phoenicis. Marked differences were observed when the organism was grown on xylan-supplemented medium at 25 degreesC or 42 degreesC. Production of xylanolytic enzymes reached maximum levels after 72 h of growth at 42 degreesC; and levels were three- to five-fold higher than at 25 degreesC. Secretion of xylanase and beta-xylosidase was also strongly stimulated at the higher temperature. The optimal temperature was 85 degreesC for extracellular and 90 degreesC for intracellular beta-xylosidase activity, independent of the growth temperature. The optimum temperature for extracellular xylanase increased from 50 degreesC to 55 degreesC when the fungus was cultivated at 42 degreesC. At the higher temperature, the xylanolytic enzymes produced by A. phoenicis showed increased thermo stability, with changes in the profiles of pH optima. The chromatographic profiles were distinct when samples obtained from cultures grown at different temperatures were eluted from DEAE-cellulose and Biogel P-60 columns.

Physiology of temperature regulation: Comparative aspects

Few environmental factors have a larger influence on animal energetics than temperature, a fact that makes thermoregulation a very important process for survival. In general, endothermic species, i.e., mammals and birds, maintain a constant body temperature (Tb) in fluctuating environmental temperatures using autonomic and behavioural mechanisms. Most of the knowledge on thermoregulatory physiology has emerged from studies using mammalian species, particularly rats. However, studies with all vertebrate groups are essential for a more complete understanding of the mechanisms involved in the regulation of Tb. Ectothermic vertebrates-fish, amphibians and reptiles-thermoregulate essentially by behavioural mechanisms. With few exceptions, both endotherms and ectotherms develop fever (a regulated increase in Tb) in response to exogenous pyrogens, and regulated hypothermia (anapyrexia) in response to hypoxia. This review focuses on the mechanisms, particularly neuromediators and regions in the central nervous system, involved in thermoregulation in vertebrates, in conditions of euthermia, fever and anapyrexia. (c) 2006 Elsevier B.V. All rights reserved.

Dialysable leukocyte extracts modify the course of experimental paracoccidioidomycosis in the Syrian hamster

The effect of dialysable leukocyte extracts (DLE) obtained from hamsters immunized with Paracoccidioides brasiliensis (immune DLE) and from non-immunized hamsters (non-immune DLE) was studied in hamsters inoculated with P. brasiliensis by the intratesticular route. Treatment with immune or non-immune DLE was started during the third week of infection and was repeated at 7, 11, 15 and 19 weeks. A group of untreated infected animals was used as control. Animals were submitted to the delayed hypersensitivity skin test to P. brasiliensis antigen (PbAg) in vivo and assayed in vitro by the macrophage migration inhibition test in the presence of Phytohemagglutinin (PHA) and PbAg and by immunodiffusion for specific antibody. The animals were sacrificed at 4, 8, 12, 16 and 20 weeks. The morphology and extension of the lesions were studied at the inoculation site, and in lymph nodes, lungs, liver, spleen and kidneys. In contrast to the controls, animals treated with both DLEs maintained a positive cell-mediated immune response throughout the experiment and developed less extensive infection with a significantly lower number of fungi in the lesions. The results suggest that immune and non-immune DLE preparations modified the evolution of experimental paracoccidioidomycosis with equal efficiency. This similarity may be explained by the immunoregulatory activities of both extracts.

Ovulation synchronization following commercial application of ultrasound-guided follicle ablation during the estrous cycle in mares

A regimen of progesterone plus estradiol (P&E) was used as a standard for ovarian synchronization to test the efficacy and evaluate the commercial application of ultrasound-guided follicle ablation as a non-steroidal alternative for ovulation synchronization in mares. Recipient mares at a private embryo transfer facility were at unknown stages of the estrous cycle at the start of the experiment on Day 1 when they were randomly assigned to an ablation group (n = 18-21 mares) or to a ME group (n = 20-21 mares). In the ablation group, mares were lightly sedated and all follicles > 10 mm were removed by transvaginal ultrasound-guided follicle aspiration. In the ME group, a combination of progesterone (150 mg) plus estradiol (10 mg) prepared in safflower oil was given daily (im) for 10 d. Two doses of prostaglandin FZ, (PGF, 10 mg/dose, im) were given 12 h apart on Day 5 in the ablation group, or a single dose on Day 10 in the ME group. Human chorionic gonadotropin (hCG, 2500 IU/mare, im) was given at a fixed time, 6 and 10 d after PGF treatment in the ablation and ME groups, respectively, with the expectation of a follicle > 30 mm at the time of treatment. In both the ablation and P&E groups, transrectal ultrasonography was done at the start of the study (Day 1) and again on the day of hCG treatment and daily thereafter to determine the presence of a CL, measure diameter of the largest follicle and detect ovulation. The mean interval from the start of the study and from PGF treatment to ovulation was shorter (P < 0.0001) in the ablation group (13.7 and 9.7 d, respectively) compared to the P&E group (22.3 and 13.2 d, respectively). Following fixed-day treatment with hCG after PGF treatment, the degree of ovulation synchronization was not different (P > 0.05) between the ablation and P&E groups within a 2-d (56 and 70%) or 4-d (83% and 90%) period. Although ultrasound-guided follicle ablation may not be practical in all circumstances, it excluded the conventional 10-d regimen of progesterone and estradiol and was considered an efficacious and feasible, non-steroidal alternative for ovulation synchronization in mares during the estrous cycle. (C 2007 Elsevier B.V. All rights reserved.

Direct determination of phosphite in fertilizers by flow-injection amperometry

A sensor based on graphite electrode modified with palladium-platinum-palladium film is proposed for phosphite determination by flow-injection amperometry. The modified electrode was prepared by a sequential cathodic deposition of Pd, Pt and Pd on a graphite electrode from 0.5% m/v PdCl2 + 28% m/v NH4OH and 2% m/v H2PtCl6 + 10% v/v H2SO4 solutions. After suitable conditioning, the electrode showed catalytic activity for phosphite oxidation when 0. 15 V was applied. The proposed system handles approximately 50 samples per hour (0.0.1 - 0.05 mol L-1 Na-2 HPO3; R-2 = 0.9997), consuming ca. 70 mu L of sample per determination. The limit of detection and amperometric sensibility were 5 X 10(-4) mol L-1 and 1.5 mA L mol(-1), respectively. The proposed method was applied to analysis of fertilizer samples without pre-treatment. Results are in agreement with those obtained by spectrophotometry and titrimetry at 95% confidence level and good recoveries (96-109%) of spiked samples were found. Relative standard deviation (n=12) of a 0.01 mol L-1 Na2HPO3 sample was 2%. The useful lifetime of modified electrode was around 220 determinations. For routine purposes it means that this electrode can be continuously used for 5 hours.

Development of a voltammetric sensor for chromium(VI) determination in wastewater sample

Screen-printed carbon electrode (SPCE) modified with poly-L-histidine film can be successfully applied for chromium(VI) determination based on its pre-concentration. Optimum adherence and stability of the POIY-L-histidine film was obtained by direct addition of PH solution 1% (w/v) on the electrode surface, followed by heating at 80 degrees C during 5 min. Linear response range, sensitivity and limit of detection were 0. 1-150 [mu mol L-1, 4. 13 LA mu mol L` and 0.046 mu mol L-1. The repeatability of the proposed sensor, evaluated in terms of relative standard deviation, was measured as 3.2% for 10 experiments in 40 mu mol L-1 using the same electrode and 4.0% using screen-printed electrode as disposable sensor, respectively. The voltammetric sensor was applied to determination of Cr(VI) and indirect determination of Cr(III) in wastewater samples previously treated by a leather dyeing industry and the average recovery for these samples was around 97%. (C) 2006 Elsevier B.V. All rights reserved.

PREPARATION AND CHARACTERIZATION OF TI(IV) OXIDE GRAFTED ONTO SILICA ON A SILICA-GEL SURFACE

Silica gel with a surface area of 500 m2g-1 and an average pore diameter of 60 angstrom was chemically modified with Ti(IV) oxide using the grafting method. The amount of metal oxide attached to the surface was 1.8.10(-3) mol g-1. The X-ray photoelectron spectra showed that the metal ion species on the surface are Ti(IV) in TiO2 and MTiO3 (M = Ca2+, Sr2+, Ba2+ and Pb2+), i.e. they have the binding energy of Ti2p3/2 = 458.7 eV. The dehydration of the solid at higher temperature increased the O(II)/Ti (O(II) = oxygen bound to titanium atom) ratio, presumably due to a reticulation of the hydrous Ti(IV) oxide on the silica surface at higher temperatures. Migration of Ti(IV) into the silica gel matrix was observed but the specific surface area was not significantly changed.