The effect of mesh size on the fishing efficiency of sardine gill nets

The study deals with the effect of mesh size on the fishing power of gill nets. The authors have shown that there can be substantial difference in the out puts of sardine gill nets, of identical design and rigging, but of different mesh sizes, operated under the same conditions.

Note on the size groups of prawns landed by shrimp trawls of four different cod end meshes

A study on the different size groups of prawns caught by four shrimp trawls having different cod-end meshes was made by the author. The results indicate that small sized prawns of mean length 77.15 mm were captured by the net having 23.38 mm cod-end at 5-6 fathoms depth, medium prawns of mean length 105.22 mm was caught in 25.21 mm and 19.88 mm cod-end at 8 fathoms depth and big sized prawns of mean length 117.98 mm were caught in 21.29 mm cod-end. Further the relation of length on breadth of prawn is worked out to be : Bp=0.15 Lp - 1.50 where Bp and Lp are breadth and length respectively.

An interpretation of the data from "The effect of mesh size on the fishing efficiency of sardine gill nets"

The paper "The effect of mesh size on the fishing efficiency of sardine gill nets" [K.M. Joseph and A.V. Sebastian, Fish. Tech; 1(2), 180-182 (1964)] marks an important step in the progress of fisheries technology and biology in India.

On the operation of small shrimp trawls in shallow waters-scope-ratio and size-depth relation

Studies on small trawls seem to be comparatively less. These trawls are generally operated in shallower waters, where due to the limitations in the length of warp that could be released, size restrictions have to be considered for their efficient functioning. An attempt has been made to assess the effective scope-ratio of length of warp required for the operation of trawls at shallower depth and to a judge the size of trawl suitable for use at lower depths.

The study of the sea state data collected from Bay of Bengal during 1964-65

The wave data collected on board Ins Kistna from Bay of Bengal during July to August, 1964 and January, February and April, 1965 are presented. The wave parameters are analyzed and given in a form most suitable for model testing of ships. The variation of wave height with Beaufort number is remarkable. Wave periods from 2 to 10 seconds are observed with maximum frequency in the range of 2 to 5 seconds. The heights and period obtained are compared with those obtained by previous workers for the North Atlantic region and Bay of Bengal. The influence of the wave period 2 to 5 seconds on the rolling, pitching and heaving periods of medium size vessels is also discussed.

Influence of size, station time and satiation amount on prey handling time in Anabas testudineus (Bloch)

Satiation amount, satiation time and handling time of Anabas testudineus (Bloch), an air breathing predatory fish was experimentally estimated using guppy (Lebistes reticulatus) as prey. Weight of the fish and satiation time influenced prey handling time. As satiation time is related to the level of hunger, level of hunger was found to influence handling time of prey.

The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Estimation of ploidy and hybridization status by erythrocyte and nucleus size analysis in carps

The present experiment was designed to observe whether the nuclear volume and area are affected by the ploidy and hybrid status of the individual. Polyploidy was induced by heat shock treatment given at 44 ± 0.5°C for 30 seconds and 45 seconds which was found to be most effective (64.7%) for induction of triploidy in Cyprinus carpio. Cell and nuclear volume and cell and nuclear area varied significantly in triploid fishes as compared to those of controls. Triploid fishes showed significantly higher growth compared to diploid counterparts. It was also observed that catla x rohu hybrid and its parents showed significant difference in the nuclear volume and area of their erythrocytes. Except nuclear volume, all the parameters were significantly different between catla and catla x rohu hybrid. The hybrids showed a closer relationship with catla as compared to rohu.

Biology, stock size and catch of small pelagic fish along the coast of Mozambique

A compilation of all the available information on the main small pelagic fish resources of Mozambican waters is presented. Resource data on distribution areas, reproduction, age, growth and stock size are described. Actual catch and catch per unit of effort of the commercially exploited stocks are also given. Results of the preliminary assessment of the stocks of scad and mackerel and the problems involving the assessment of Kelee shad stock at Maputo Bay are discussed.

Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O

The effect of size, morphology and crystallinity of seed crystals on the nucleation and growth of large grain Y-Ba-Cu-O (YBCO) bulk superconductors fabricated by top seeded melt growth (TSMG) has been investigated. Seeding bulk samples with small, square shaped seed crystals leads to point nucleation and growth of the superconducting YBa2Cu3O7-y (Y-123) phase that exhibits the usual square habitual growth symmetry. The use of triangular and circular shaped seed crystals, however, modifies significantly the growth habit geometry of the grain. The use of large area seeds both increases the rate of epitaxial nucleation of the Y-123 phase and produces relatively large crystals in the incongruent melt, which decreases significantly the processing times of large grain samples. The present study is relevant to decrease processing times of samples with both preferred or no growth sectors and for multiple seeding of large grain samples which contain clean grain boundaries. © 2005 Published by Elsevier Ltd.

Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials

Small scale yielding around a mode I crack is analysed using polycrystalline discrete dislocation plasticity. Plane strain analyses are carried out with the dislocations all of edge character and modelled as line singularities in a linear elastic material. The lattice resistance to dislocation motion, nucleation, interaction with obstacles and annihilation are incorporated through a set of constitutive rules. Grain boundaries are modelled as impenetrable to dislocations. The polycrystalline material is taken to consist of two types of square grains, one of which has a bcc-like orientation and the other an fcc-like orientation. For both orientations there are three active slip systems. Alternating rows, alternating columns and a checker-board-like arrangement of the grains is used to construct the polycrystalline materials. Consistent with the increasing yield strength of the polycrystalline material with decreasing grain size, the calculations predict a decrease in both the plastic zone size and the crack-tip opening displacement for a given applied mode I stress intensity factor. Furthermore, slip-band and kink-band formation is inhibited by all grain arrangements and, with decreasing grain size, the stress and strain distributions more closely resemble the HRR fields with the crack-tip opening approximately inversely proportional to the yield strength of the polycrystalline materials. The calculations predict a reduction in fracture toughness with decreasing grain size associated with the grain boundaries acting as effective barriers to dislocation motion.

Status of the gill net fishery for the small pelagic fish species in western, south-western and southern coastal waters of Sri Lanka during 1995-1997

Small pelagic fish species are mainly caught by gill nets operated by fibre reinforced plastic boats fitted with 8-25hp out board engines, traditional crafts fitted with 8-1hp out board engines and non mechanised traditional crafts. Around 28 to 55% of the small pelagic catch in the study area consisted of trenched sardine Amblygaster sirm during 1995-1997 period. Another 26-36% of the catch composed of other Sardinella species such as Sardinella gibbosa, S. albella, S. sindensis and S. longiceps. Engraulids such as Encrasicholina heteroloba, Stolephorus insularis and Stolephorus indicus and Thryssa spp formed around 3-5% of the catch. The major component of this fishery consisted of Clupeids and Engrauhds and over 65 species ranged between smaller Engraulids to incidental rock fish, sail fish, seer fish, sharks, skates and rays. Around 1.4 to 1.9% of the catch consisted of Chirocentrus dorab, Sphyraenaspp, Scomberomorus spp, Lepturcanthus sp and Megalaspis cordyla. Around 1-11% of the catch consisted of incidentally catches of sharks, rays, skates and sail fish. Another 1.6 to 6% of the catch consisted of Selar crumenophthalamus and Rastrelliger kanagurta. The best fishing season appeared to be from June to October in the west coast and August to December in the south coast. The major components of Amblygaster sirm, Sardinella albella and Sardinella gibbosa were caught within the size ranges of 10.0-22.5 cm, 11.0-13.0 cm and 11.0-15.0 cm respectively. However, smaller sized fish of above species of sizes between 6.9 cm to 9.7 cm total length were incidentally caught in the gill nets operated for small Engraulids with a stretched mesh size of 1.6cm. The overall catch rate for the major fish landing centre at Negombo indicated an increase from 38.5 kg/boat trip during 1984-1990 period to 49.5 kg/boat trip during 1995-1997 period. The catch rate for the dominant species Amblygaster sirm has decreased from 28.17 kg/boat trip during 1983-1990 period to 17.47 kg/boat trip during 1995-1997 period at Negombo. The paper also discusses the changing overall catch rates, change in species abundance and possible management consequences that should be considered.