Predicted properties of the superheavy elements, II. Element 111, Eka-Gold

The chemical properties of element 111, eka-gold, are predicted through the use of the periodic table, relativistic Hartee-Fock-Slater calculations, and various qualitative theories which have established their usefulness in understanding and correlating properties of molecules. The results indicate that element 111 will be like Au(III) in its chemistry with little or no tendency to show stability in the I or II states. There is a possibility that the 111 - ion, analogous to the auride ion, will be stable.

Predicted properties of the superheavy elements. III. Element 115, Eka-Bismuth

Element 115 is expected to be in group V-a of the periodic table and have most stable oxidation states of I and III. The oxidation state of I, which plays a minor role in bismuth chemistry, should be a major factor in 115 chemistry. This change will arise because of the large relativistic splitting of the spherically symmetric 7p_l/2 shell from the 7P_3/2 shell. Element 115 will therefore have a single 7p_3/2 electron outside a 7p^2_1/2 closed shell. The magnitude of the first ionization energy and ionic radius suggest a chemistry similar to Tl^+. Similar considerations suggest that 115^3+ will have a chemistry similar to Bi^3+. Hydrolysis will therefore be easy and relatively strongly complexing anions of strong acids will be needed in general to effect studies of complexation chemistry. Some other properties of 115 predicted are as follows: ionization potentials I 5.2 eV, II 18.1 eV, III 27.4 eV, IV 48.5 eV, 0 \rightarrow 5^+ 159 eV; heat of sublimation, 34 kcal (g-atom)^-1; atomic radius, 2.0 A; ionic radius, 115^+ 1.5 A, 115^3+ 1.0 A; entropy, 16 cal deg^-1 (g-atom)^-l (25°); standard electrode potential 115^+ |115, -1.5 V; melting and boiling points are similar to element 113.

Atomic and ionic radii of superheavy elements

Atomic and ionic radii are presented for the elements E104-E120 and E156-E172. It is shown that a number of effects correlated with the large relativistic contraction of orbitals with low angular momentum leads to smaller atoms for higher atomic numbers. It is expected that Cs is the largest atom in nature.

Model calculations on the influence of quantum electrodynamical effects on the chemistry of superheavy elements.

Using a phenomenological model, the influence of quantum electrodynamical effects on the prediction of the chemical behavior of superheavy elements within a relativistic Dirac-Slater calculation was investigated. This influence will be small and nondetectable for elements up to Z = 114. For elements near Z = 164 some changes in the ground state configurations occur but the chemical behavior will not change. Using this heuristic model, it is also possible to calculate elements beyond Z = 175. As an example we have chosen element E184 and are now able to make more valid speculations about the chemical behavior of the element than Penneman and co-workers could.

State-dependent volume isotope shifts of low-lying states of group-IIa and -IIb elements

Results of relativistic multiconfiguration Dirac-Fock calculations with an extended nucleus are used to analyze the volume isotope shifts of the resonance transitions in the group-IIa and -IIb elements as well as in Yb. This is done together with a review of the isotope shift theory, including a critical evaluation and comparison of the semiempirical calculation of volume isotope shifts commonly used today. Electronic factors F_i, proportional to differences of electronic densities over the nuclear volume, are discussed within various approximations and compared with experimental results.

Ions of the superheavy elements in vacuum and in solution

The extension of the Periodic Table into the range of unknown atomic numbers of above one hundred requires relativistic calculations. The results of the latter are used to indicate probable values for X-ray transition lines which will be useful for identification of the atomic species formed during collision between accelerated ions and the target. If the half-lives of the isotopes are long, then the chemistry of these new species becomes an important question which is reviewed for E110, E 111 and E112. The possible structural chemistry of the elements E108 to E112 is suggested. Finally the effects of solvation on ions of the actinide and superheavy elements have been studied.

Chancen und Risiken der Arbeit im E-Business

E-Business, verstanden als ganzheitliche Strategie zur Reorganisation von Geschäftsprozessen, Strukturen und Beziehungen in Unternehmen, bietet für die Arbeitsgestaltung in einer digital vernetzten Welt Chancen und Risiken in Hinblick auf die Humankriterien. Empirische Untersuchungen in 14 Unternehmen zeigen „good practice“-Ansätze im B2B-Feld (Business-to-Business). Untersucht wurden die Tätigkeiten der elektronisch vernetzten Auftragsbearbeitung, des Web-, Content-Managements, der digitalen Druckvorlagenherstellung sowie der CAD- Bauplanzeichnung. Die beobachteten Arbeitsplätze zeigen, dass Arbeitsinhalte eher ganzheitlich und komplex gestaltet sind. Planende, ausführende, kontrollierende und organisierende Anteile weisen auf eine vielfältige Aufgabengestaltung hin, die hohe Anforderungen beinhaltet. Während alle beobachteten Tätigkeiten mit Aufnahme-, Erarbeitungs-, Verarbeitungs-, Übertragungs- und Weitergabeprozessen von Informationen zu tun haben, gibt es Differenzen in Bezug auf den Arbeitsumfang, den Zeitdruck, Fristsetzungen, erwartete Arbeitsleistungen sowie die Planbarkeit der Aufgaben. Die vorgefundenen Aufgabentypen (wenig bis sehr anforderungsreich im Sinne von Denk- und Planungsanforderungen) sind gekennzeichnet durch eine unterschiedlich ausgeprägte Aufgabenkomplexität. Interessant ist, dass, je anforderungsreicher die Aufgabengestaltung, je höher die Aufgabenkomplexität, je größer die Wissensintensität und je niedriger die Planbarkeit ist, desto größer sind die Freiräume in der Aufgabenausführung. Das heißt wiederum, dass bei zunehmenden E-Business-Anteilen mehr Gestaltungsspielräume zur Verfügung stehen. Die bestehenden Chancen auf eine humane Aufgabengestaltung sind umso größer, je höher die E-Business-Anteile in der Arbeit sind. Diese Wirkung findet sich auch bei einem Vergleich der Aufgabenbestandteile wieder. Die negativen Seiten des E-Business zeigen sich in den vorgefundenen Belastungen, die auf die Beschäftigten einwirken. Diskutiert wird die Verschiebung von körperlichen hin zu psychischen und vorrangig informatorischen Belastungen. Letztere stellen ein neues Belastungsfeld dar. Ressourcen, auf welche die Mitarbeiter zurückgreifen können, sind an allen Arbeitsplätzen vorhanden, allerdings unterschiedlich stark ausgeprägt. Personale, organisationale, soziale, aufgabenbezogene und informatorische Ressourcen, die den Beschäftigten zur Verfügung stehen, werden angesprochen. In Bezug auf die Organisationsgestaltung sind positive Ansätze in den untersuchten E-Business-Unternehmen zu beobachten. Der Großteil der untersuchten Betriebe hat neue Arbeitsorganisationskonzepte realisiert, wie die vorgefundenen kooperativen Organisationselemente zeigen. Die kooperativen Organisationsformen gehen allerdings nicht mit einer belastungsärmeren Gestaltung einher. Das vorgefundene breite Spektrum, von hierarchisch organisierten Strukturen bis hin zu prozess- und mitarbeiterorientierten Organisationsstrukturen, zeigt, dass Organisationsmodelle im E-Business gestaltbar sind. Neuen Anforderungen kann insofern gestaltend begegnet und somit die Gesundheit und das Wohlbefinden der Mitarbeiter positiv beeinflusst werden. Insgesamt betrachtet, zeigt E-Business ein ambivalentes Gesicht, das auf der Basis des MTO-Modells (Mensch-Technik-Organisation) von Uhlich (1994) diskutiert wird, indem vernetzte Arbeitsprozesse auf personeller, technischer sowie organisationaler Ebene betrachtet werden. E-business, seen as more than only the transformation of usual business processes into digital ones, furthermore as an instrument of reorganisation of processes and organisation structures within companies, offers chances for a human oriented work organisation. Empirical data of 14 case studies provide good practice approaches in the field of B2B (Business-to-Business). The observed work contents show, that tasks (e.g. order processing, web-, contentmanagement, first print manufacturing and architectural drawing) are well arranged. Executive, organising, controlling and coordinating parts constitute a diversified work content, which can be organised with high demands. Interesting is the result, that the more e-business-parts are within the work contents, on the one hand the higher are the demands of the type of work and on the other hand the larger is the influence on workmanship. The observed enterprises have realised new elements of work organisation, e.g. flexible working time, cooperative leadership or team work. The direct participation of the employees can be strengthened, in particular within the transformation process. Those companies in which the employees were early and well informed about the changes coming up with e-business work, the acceptance for new technique and new processes is higher than in companies which did not involve the person concerned. Structured in an ergonomic way, there were found bad patterns of behaviour concerning ergonomic aspects, because of missing knowledge regarding work-related ergonomic expertise by the employees. E-business indicates new aspects concerning requirements – new in the field of informational demands, as a result of poorly conceived technical balance in the researched SME. Broken systems cause interruptions, which increase the pressure of time all the more. Because of the inadequate usability of software-systems there appear in addition to the informational strains also elements of psychological stress. All in all, work contents and work conditions can be shaped and as a result the health and well-being of e-business-employees can be influenced: Tasks can be structured and organised in a healthfulness way, physiological strain and psychological stress are capable of being influenced, resources are existent and developable, a human work design within e-business structures is possible. The ambivalent face of e-business work is discussed on the basis of the MTO- (Mensch-Technik-Organisation) model (Ulich 1994). Thereby new and interesting results of researches are found out, concerning the personal/human side, the technical side and the organisational side of e-business work.

New Architectural Models for Visibly Controllable Computing: The Relevance of Dynamic Object Oriented Architectures and Plan Based Computing Models

Traditionally, we've focussed on the question of how to make a system easy to code the first time, or perhaps on how to ease the system's continued evolution. But if we look at life cycle costs, then we must conclude that the important question is how to make a system easy to operate. To do this we need to make it easy for the operators to see what's going on and to then manipulate the system so that it does what it is supposed to. This is a radically different criterion for success. What makes a computer system visible and controllable? This is a difficult question, but it's clear that today's modern operating systems with nearly 50 million source lines of code are neither. Strikingly, the MIT Lisp Machine and its commercial successors provided almost the same functionality as today's mainstream sytsems, but with only 1 Million lines of code. This paper is a retrospective examination of the features of the Lisp Machine hardware and software system. Our key claim is that by building the Object Abstraction into the lowest tiers of the system, great synergy and clarity were obtained. It is our hope that this is a lesson that can impact tomorrow's designs. We also speculate on how the spirit of the Lisp Machine could be extended to include a comprehensive access control model and how new layers of abstraction could further enrich this model.

Major-elements trends in cenozoic volcanites of Hungary

Hungary lies entirely within the Carpatho-Pannonian Region (CPR), a dominant tectonic unit of eastern Central Europe. The CPR consists of the Pannonian Basin system, and the arc of the Carpathian Mountains surrounding the lowlands in the north, east, and southeast. In the west, the CPR is bounded by the Eastern Alps, whereas in the south, by the Dinaridic belt. (...)

Disseny d’un banc d’assaig d’efectes diferits en elements de formigó armat amb barres FRP

L'objectiu d'aquest projecte és el disseny dels bancs d'assaig necessaris per poder realitzar tres assajos de fisuració i deformació diferida al laboratori de resistència de materials de la UdG sobre provetes i bigues de formigó armat amb FRP i estudiar- ne el comportament. El primer assaig és el de fluència del formigó, on es sotmet una proveta a una compressió mantinguda en el temps. El segon assaig és un de tracció directa, on s'aplica una càrrega a tracció mantinguda en el temps en una proveta de formigó armat amb una barra FRP de reforç intern. El tercer és un assaig a flexió, on es carregarà una biga a flexió durant un període llarg de temps

Estudi hidrodinàmic per elements finits de diferents pales simètriques per a la impulsió a rem en banc fix

Actualment l’esport del rem només s’entén com a activitat de lleure o esport de competició. Dins del rem, hi ha una gran varietat de disciplines esportives; totes coincideixen en l’impuls d’una embarcació mitjançant un sistema de palanques simple. Es diferencien en dos grans grups: el banc mòbil i el banc fix. El banc mòbil disposa d’un seient sobre rodes que permet aprofitar la força de les cames per la impulsió, en canvi, en el banc fix, no hi ha desplaçament del seient, el que implica el treball del tors i braços. Un dels punts que tenen en comú tot el banc fix, és el disseny del seu rem; a diferència del banc mòbil on la pala pot tenir el disseny que es vulgui. En banc fix la pala del rem ha de ser simètrica i alineada amb la canya del rem. L’objectiu d’aquest projecte és l’anàlisi hidrodinàmic de diferents models de pales simètriques per tal de determinar el model més eficient, des del punt de vista hidrodinàmic, per a la impulsió de l’embarcació de banc fix. Així, es simularan virtualment diferents models de pales simètriques disponibles en el mercat com models prototipus amb un programa de dinàmica de fluids computacional. L’anàlisi dels resultats determinarà el model més eficient. En la realització del projecte, l’estudi hidrodinàmic es realitzarà de manera virtual a partir de la utilització de programes comercials de dinàmica de fluids. Així com també programes de disseny 3D i programes de mallat que siguin compatibles amb el programa de simulació a utilitzar. En el disseny s’utilitzaran programes com Autocad i Rhinoceros, després, en funció del disseny, utilitzarem un programa d’elements finits anomenat ICEM ANSYS que mallarà la geometria emprada. Finalment, la simulació s’efectuarà amb el programa ANSYS CFX. L’estudi no preveu el càlcul de resistència mecànica dels models ni la seva construcció

Modelització numèrica d’un sistema de descàrrega d’una columna de la catedral d Girona mitjançant el mètode dels elements finits (anàlisi no lineal)

Aquest projecte consisteix en aplicar el càlcul no lineal en la modelització volumètrica numèrica de l’estructura del sistema de descàrrega d’una columna del claustre de la catedral de Girona mitjançant el mètode dels elements finits. A la Universitat de Girona s’ha fet diferents estudis del claustre de la catedral de Girona però sempre simulant un comportament lineal de les característiques dels materials. El programa utilitzat és la versió docent del programa ANSYS disponible al Dept. d’EMCI i l’element emprat ha sigut el SOLID65. Aquest element permet introduir característiques de no linealitat en els models i és adequat per a anàlisi no lineal d’elements com la pedra de Girona

Periodic Table of Elements

An essential tool for chemistry students. Presentation of the table in which elements are assigned a symbol and shows the atomic number of each element.