Studies on the Utilisation of Rubber Reclaim in Elastomers

The thesis describes utilisation of reclaimed rubber, Whole Tyre Reclaim (WTR) produced from bio non- degradable solid pollutant scrap and used tyres. In this study an attempt has made to optimize the substitution of virgin rubber with WTR in both natural and synthetic rubber compounds without seriously compromising the important mechanical properties. The WTR is used as potent source of rubber hydrocarbon and carbon black filler. Apart from natural rubber (NR), Butadiene rubber (BR), Styrene butadiene rubber (SBR), Acrylonitrile butadiene rubber (NBR) and Chloroprene rubber (CR) were selected for study, being the most widely used general purpose and specialty rubbers. The compatibility problem was addressed by functionalisation of WTR with maleic anhydride and by using a coupling agent Si69.The blends were systematically evaluated with respect to various mechanical properties. The thermogravimetric analyses were also carried out to evaluate the thermal stability of the blends.Mechanical properties of the blends were property and matrix dependant. Presence of reinforcing carbon black filler and curatives in the reclaimed rubber improved the mechanical properties with the exception of some of the elastic properties like heat build up, resilience, compression set. When WTR was blended with natural rubber and synthetic rubbers, as the concentration of the low molecular weight, depolymerised WfR was increased above 46-weight percent, the properties deteriorates.When WTR was blended with crystallizing rubbers such as natural rubber and chloroprene rubber, properties like tensile strength, ultimate elongation were decreased in presence of WTR. Where as in the case of blends of WTR with non-crystallizing rubbers reinforcement effect was more prominent.The effect of functionalisation and coupling agent was studied in three matrices having different levels of polarity(NBR, CR and SBR).The grafting of maleic anhydride on to WTR definitely improved the properties of its blends with NBR, CR and SBR, the effect being prominent in Chloroprene rubber.Improvement in properties of these blends could also achieved by using a coupling agent Si69. With this there is apparent plasticizing effect at higher loading of the coupling agent. The optimum concentration of Si69 was 1 phr for improved properties, though the improvements are not as significant as in the case of maleic anhydride grafting.Thermal stability of the blend was increased by using silane-coupling agent.

Studies on improved practices of prawn farming for higher production in central Kerala

The thesis entitled "Studies on improved practices of prawn farming for higher production in central Kerala" prepared by the author describes various practices prevailing in the study area in order to elucidate their relative merits. The study on semi-intensive farming at Mundapuram, Kannur was also carried out and included in the thesis for comparison.The author felt it important to make a critical study of the existing culture practices in the central Kerala, a region where it has been existing since time immemorial.Careful analysis of data accrued by the author has helped him to identify strength, weakness, opportunities and threats confronting the shrimp farming. As a result it was possible to evolve an appropriate management technology taking into consideration the various ecological (location specific), social and economical conditions prevalent in the vast study area.

Studies on the Microbial spoilage of Penaeus indicus

The aim of the present investigation is to build up the knowledge on the role of commensal bacteria present on the prawns during storage at various temperatures. The study Evaluates the nature of spoilage of prawns during storage at three different temperatures (28:2OC, 4°C and -18°C) by organoleptic assessment, accumulation of trim ethylamine, ammonia content, changes in the flesh pH and total heterotrophic bacterial population at various time intervals and to find out the changes in the proximate composition (protein, carbohydrate, lipid, ash and moisture) of the prawns during storage at various temperatures by estimating the contents at different time intervals along with spoilage assessment. The researcher studies the occurrence and role of various bacterial genera which form the component of spoilage flora during storage and determines the distribution of various hydrolytic enzyme producing bacteria by evaluating their ability to produce enzymes such as caseinase, gelatinase, amylase, lipase and urease. to assess the spoilage potential of the bacteria by testing their ability to reduce trimethylamine oxide (TMAO) to trimethylamine (TMA) and to produce odour in flesh broth and halos in flesh agar media.The researcher also gives stress on the growth kinetics of selected potential spoilers by growing_them in different media and to assess the effect of sodium chloride concentrations, temperature and pH on their growth, survival and. generation time.

Study on acceleratore in rubber vulcanization with special reference to the binary systems containing substituted dithiobiurets

The thesis entitled Study on Accelerators in Rubber Vulcanization with Special Reference to the Binary Systems Containing Substituted Dithiobiurets. It includes a detailed study on the binary accelerator systems containing substituted dithiobiurets in natural rubber and NR latex and dithiobiurets in SBR and NR-SBR blends vulcanization systems. It deals with the experimental procedure adopted for the preparation of DTB-II and DTB-III; the procedure for compounding and vulcanization and determination of physical properties like modulus, tensile strength, elongation at break, hardness, compression set, heat build up etc. The results indicate that there is efficient acceleration activity of the dithiobiurets in the vulcanization of natural rubber latex containing TMT. The study of dithiobiurets in natural rubber and NR latex reveal that they are having definite accelerating effect in SBR vulcanization systems.

Molecular characterization of the nitrifying bacterial consortia employed for the activation of bioreactors used in brackish and marine aquaculture systems

The addition of commercial nitrifying bacterial products has resulted in significant improvement of nitrification efficiency in recirculating aquaculture systems (RAS). We developed two nitrifying bacterial consortia (NBC) from marine and brackish water as start up cultures for immobilizing commercialized nitrifying bioreactors for RAS. In the present study, the community compositions of the NBC were analyzed by universal 16S rRNA gene and bacterial amoA gene sequencing and fluorescence in situ hybridization (FISH). This study demonstrated that both the consortia involved autotrophic nitrifiers, denitrifiers as well as heterotrophs. Abundant taxa of the brackish water heterotrophic bacterial isolates were Paenibacillus and Beijerinckia spp. whereas in the marine consortia they were Flavobacterium, Cytophaga and Gramella species. The bacterial amoA clones were clustered together with high similarity to Nitrosomonas sp. and uncultured beta Proteobacteria. FISH analysis detected ammonia oxidizers belonging to b subclass of proteobacteria and Nitrosospira sp. in both the consortia, and Nitrosococcus mobilis lineage only in the brackish water consortium and the halophilic Nitrosomonas sp. only in the marine consortium. However, nitrite oxidizers, Nitrobacter sp. and phylum Nitrospira were detected in both the consortia. The metabolites from nitrifiers might have been used by heterotrophs as carbon and energy sources making the consortia a stable biofilm.

Optimum growth requirements of nitrifying consortia developed from treated sewage

The optimum growth requirements of two nitrifying consortia developed from treated sewage by enrichment technique were determined by a series of experiments. There was total inhibition of nitrification at above 2.75 g r' NH/- Nand 2.5g r' N02' - N and the ammonia oxidizing consortium preferred a pH at 8.5 and the nitrite oxidizing consortium a pH of 7.5 as the optima for nitrification. Optimum temperatures were between 20° and 30°C for both the groups. As the rate of airnow was increased from I to 7 Ilmin, the build-up of N02- -N increased 10-fold and the consumption of N02- -N increased by a factor of 28.8 implying that the ammonia oxidizing consortium in a bioreactor required three times more aeration than that for nitrite oxidizers for ex pressing their full nitrifying potential. These data directly contribute for developing a fermentati on process for the mass production of nitrifiers as well as for designing bio reactors for nitrifying sewage.

Settlement history of a mountain oasis in Northern Oman

To unravel the settlement history of oases in northern Oman, data on topography, the agricultural setting, water and soil parameters and archaeological findings were collected in the Wadi Bani Awf with its head oasis Balad Seet. Data collection lasted from April 2000 to April 2003 and was based on the establishment of a 3D-georeferenced map of the oasis comprising all its major infrastructural and agronomic features. At today's Balad Seet, a total of 8.8 ha are planted to 2,800 date palms and 4.6 ha are divided into 385 small fields dedicated to wheat, barley, sorghum, oats, alfalfa, garlic, onion, lime and banana. Radiocarbon dating of charcoal in the lower part of the main terrace system determined its age to 911 ± 43 years. Monthly flow measurements of four major aflaj systems showed a total maximum flow of 32 m^3 h^-1 with the largest falaj contributing 78% of the total flow. During drought periods, average water flow decreased by 3% per month, however, with significant differences between the spring systems. The analysis of the tritium/^3helium ratio in the water led to an estimated water age of up to 10 years. In combination with the flow data, this provided insights into the elasticity of the spring flow over time. The use of the natural resources of the Wadi Bani Awf by a pastoral population started probably in the early 3rd millennium BC. The first permanent settlement might have been established at Balad Seet during the first part of the 1st millennium BC. Presumably it was initiated by settlers from al-Hamra, a village at the southern foot of the Hajar mountains. Given an abundant und stable flow of springs, even in periods of drought, the construction of Balad Seet's first irrigation systems may have occurred at this early time. The combination of topographic, agricultural, hydro-pedological and archaeological data allowed assessment of the carrying capacity of this oasis over the three millennia of its likely existence. The changing scarcity of land and water and the eventual optimisation of their use by different aflaj constructions have been major driving forces for the development and apparent relativeley stable existence of this oasis.

Plant genetic diversity, irrigation and nutrient cycling in traditional mountain oases of northern Oman

Little is known about plant biodiversity, irrigation management and nutrient fluxes as criteria to assess the sustainability of traditional irrigation agriculture in eastern Arabia. Therefore interdisciplinary studies were conducted over 4 yrs on flood-irrigated fields dominated by wheat (Triticum spp.), alfalfa (Medicago sativa L.) and date palm (Phoenix dactylifera L.) in two mountain oases of northern Oman. In both oases wheat landraces consisted of varietal mixtures comprising T. aestivum and T. durum of which at least two botanical varieties were new to science. During irrigation cycles of 6-9 days on an alfalfa-planted soil, volumetric water contents ranged from 30-13%. For cropland, partial oasis balances (comprising inputs of manure, mineral fertilizers, N2-fixation and irrigation water, and outputs of harvested products) were similar for both oases, with per hectare annual surpluses of 131 kg N, 37 kg P and 84 kg K at Balad Seet and of 136 kg N, 16 kg P and 66 kg K at Maqta. Respective palm grove surpluses, in contrast were with 303 kg N, 38 kg P, and 173 kg K ha^-1 yr^-1 much higher at Balad Seet than with 84 kg N, 14 kg P and 91 kg K ha^-1 yr^-1 at Maqta. The results show that the sustainability of these irrigated landuse systems depends on a high quality of the irrigation water with low Na but high CaCO3, intensive recycling of manure and an elaborate terrace structure with a well tailored water management system that allows adequate drainage.

MitWirkung - Zukunft gestalten

Die Diskussion in den Planungswissenschaften beschreibt den Paradigmenwechsel vom so genannten DEAD-Model (Decide-Announce-Defend) zum Tripple-D-Model (Dialogue-Decide-Deliver) und beschäftigt sich intensiv mit dem Thema Governance. Komplexe Planungsaufgaben brauchen eine Vielfalt an Lösungsideen unterschiedlicher gesellschaftlicher Gruppen. Planung verfolgt u. a. die Umsetzung der Ziele einer nachhaltigen Entwicklung, die die Einbeziehung der Öffentlichkeit (Zivilgesellschaft, Unternehmen und Bürger) verlangt. Darüber hinaus wird eine Erweiterung der Perspektive über Verfahren und Steuerungsformen hinaus auf Akteure und Prozesse gefordert. Räumliche Entwicklungen sollen stärker im Zusammenhang mit Entscheidungsfindungsprozesse untersucht werden. Die Dissertation ergänzt eine wirkungsorientierte Perspektive, die Wirkungen, sowohl räumliche als auch soziale, in den Mittelpunkt der Betrachtung stellt. Sie stützt sich auf Beobachtungen, dass klassisches Projektmanagement für erfolgreiche Planungsprozesse nicht ausreicht, sondern zusätzlich Prozessmanagement braucht. Mit der Weiterentwicklung der partizipativen Planung, die zusätzlich in den Kontext gesellschaftlicher Lernprozesse und zukunftsfähiger Veränderungen gesellschaftlicher Bedingungen gestellt wird, ergänzt die Dissertation planungswissenschaftliche Theorien. Aus einem fachübergreifenden Blickwinkel wird die räumliche Planung in die Reihe von Management- und Organisationswissenschaften eingeordnet. Ausgehend von der Frage, welche räumlichen und sozialen Wirkungen durch Beteiligungsprozesse unter welchen Bedingungen erzielt werden, wurden Fallstudien aus der Wasserwirtschaft und ihre Prozessbiografien umfassend evaluiert. Als Evaluierungsmethode wurde ein von der EU-Kommission empfohlener Evaluierungsrahmen gewählt, der sowohl den Prozess selbst, seine Rahmenbedingungen und Durchführung, als auch Wirkungen analysiert und bewertet. Auf der Grundlage der Ergebnisse und theoretischer Erkenntnisse, vorrangig aus der Evaluationsforschung, wird ein umfassender Beteiligungsansatz konzipiert. Dabei handelt es sich um ein offenes Gerüst, in das sich bewährte und innovative Elemente strategisch gezielt integrieren lassen. Die Struktur verbindet verschiedene Beteiligungswerkzeuge unterschiedlicher Intensitäten und für unterschiedliche Zielgruppen zu einem Gesamtkonzept, mit dem Ziel, möglichst die gewünschten Wirkungen zu erreichen. Wesentlich an dem Ansatz ist, dass bereits das Prozessdesign unter Mitwirkung von Projektträgern, Beratern und Schlüsselakteuren erfolgt. Die partizipative Beteiligungsplanung bedeutet somit Klärung der Vorgehensweise und gleichzeitig Bewusstseins- und Kompetenzerweiterung der verantwortlichen Akteure. Im Ausblick werden künftige Forschungsaufgaben im Bereich der Mitwirkung in der räumlichen Planung formuliert und Handlungsmöglichkeiten aufgezeigt, um Partizipation als Teil planerischer „Alltagskultur“ weiterzuentwickeln. Dies erfolgt vor dem Hintergrund der Bedeutung von Partizipation und Bildung als Umsetzungsstrategie von Ideen der Landschaftsentwicklung und Nachhaltigkeit.

Clay pot irrigation for tomato (Lycopersicon esculentum Mill) production in the north east semiarid region of Ethiopia

Water shortage is one of the major constraints for production of horticultural crops in arid and semiarid regions. A field experiment was conducted to determine irrigation water and fertilizer use efficiency, growth and yield of tomato under clay pot irrigation at the experimental site of Sekota Dryland Agricultural Research Center, Lalibela, Ethiopia in 2009/10. The experiment comprised of five treatments including furrow irrigated control and clay pot irrigation with different plant population and fertilization methods, which were arranged in Randomized Complete Block Design with three replications. The highest total and marketable fruit yields were obtained from clay pot irrigation combined with application of nitrogen fertilizer with irrigation water irrespective of difference in plant population. The clay pot irrigation had seasonal water use of up to 143.71 mm, which resulted in significantly higher water use efficiency (33.62 kg m^-3) as compared to the furrow irrigation, which had a seasonal water use of 485.50 mm, and a water use efficiency of 6.67 kg m^-3. Application of nitrogen fertilizer with irrigation water in clay pots improved fertilizer use efficiency of tomato by up to 52% than band application with furrow or clay pot irrigation. Thus, clay pot irrigation with 33,333 plants ha^-1 and nitrogen fertilizer application with irrigation water in clay pots was the best method for increasing the yield of tomato while economizing the use of water and nitrogen fertilizer in a semiarid environment.

Characteristics, socioeconomic benefits and household livelihoods of beef buffalo and beef cattle farming in Northeast Thailand

Since the Thai economy experiences rapid growth, agricultural systems, i.e. crop-livestock systems, are changing rapidly. On account of these changes, buffalo and cattle production has to be re-examined in terms of performance characteristics and roles of livestock for farm households in order to initiate suitable development programmes. Therefore, this study aimed to investigate the present characteristics of beef buffalo and beef cattle farms in Northeast Thailand. Using a semi-structured questionnaire, 121 randomly selected beef buffalo and beef cattle farms were interviewed in Nakhon Ratchasima province between October 2007 and May 2008. Both buffaloes and cattle were mostly integrated in mixed crop-livestock systems with medium to large farm sizes (7.9 ha), whereof less than half of the area was used for livestock. Family members were mainly responsible for the different activities of livestock farming and salaried labourers were only found on large-scale farms. The dominant roles of livestock were income generation to build up wealth or savings, the coverage of expected and unexpected expenses and earning of regular and additional income. Another important issue was the improvement of the social status, which increased with herd size. In order to improve farmers’ livelihoods and develop sustainable farming systems in Northeast Thailand the changing economic circumstances of cattle and especially buffalo production should receive more attention of researchers, governmental institutions and stakeholders.

From First Contact to Close Encounters: A Developmentally Deep Perceptual System for a Humanoid Robot

This thesis presents a perceptual system for a humanoid robot that integrates abilities such as object localization and recognition with the deeper developmental machinery required to forge those competences out of raw physical experiences. It shows that a robotic platform can build up and maintain a system for object localization, segmentation, and recognition, starting from very little. What the robot starts with is a direct solution to achieving figure/ground separation: it simply 'pokes around' in a region of visual ambiguity and watches what happens. If the arm passes through an area, that area is recognized as free space. If the arm collides with an object, causing it to move, the robot can use that motion to segment the object from the background. Once the robot can acquire reliable segmented views of objects, it learns from them, and from then on recognizes and segments those objects without further contact. Both low-level and high-level visual features can also be learned in this way, and examples are presented for both: orientation detection and affordance recognition, respectively. The motivation for this work is simple. Training on large corpora of annotated real-world data has proven crucial for creating robust solutions to perceptual problems such as speech recognition and face detection. But the powerful tools used during training of such systems are typically stripped away at deployment. Ideally they should remain, particularly for unstable tasks such as object detection, where the set of objects needed in a task tomorrow might be different from the set of objects needed today. The key limiting factor is access to training data, but as this thesis shows, that need not be a problem on a robotic platform that can actively probe its environment, and carry out experiments to resolve ambiguity. This work is an instance of a general approach to learning a new perceptual judgment: find special situations in which the perceptual judgment is easy and study these situations to find correlated features that can be observed more generally.

Possible solution of some essential zero problems in compositional data analysis

One of the tantalising remaining problems in compositional data analysis lies in how to deal with data sets in which there are components which are essential zeros. By an essential zero we mean a component which is truly zero, not something recorded as zero simply because the experimental design or the measuring instrument has not been sufficiently sensitive to detect a trace of the part. Such essential zeros occur in many compositional situations, such as household budget patterns, time budgets, palaeontological zonation studies, ecological abundance studies. Devices such as nonzero replacement and amalgamation are almost invariably ad hoc and unsuccessful in such situations. From consideration of such examples it seems sensible to build up a model in two stages, the first determining where the zeros will occur and the second how the unit available is distributed among the non-zero parts. In this paper we suggest two such models, an independent binomial conditional logistic normal model and a hierarchical dependent binomial conditional logistic normal model. The compositional data in such modelling consist of an incidence matrix and a conditional compositional matrix. Interesting statistical problems arise, such as the question of estimability of parameters, the nature of the computational process for the estimation of both the incidence and compositional parameters caused by the complexity of the subcompositional structure, the formation of meaningful hypotheses, and the devising of suitable testing methodology within a lattice of such essential zero-compositional hypotheses. The methodology is illustrated by application to both simulated and real compositional data

III Congreso ibérico sobre gestión y planificación del agua. La directiva marco del agua: realidades y futuros. Sevilla, del 13 al 17 de noviembre de 2002

Entre els dies 13 i 17 de novembre de 2002 va tenir lloc a la ciutat de Sevilla el III Congrés Ibèric sobre Gestió i Planificació de l’Aigua, que, en aquesta ocasió, portava per títol «La Directiva Marc de l’Aigua: realitats i futurs». El congrés fou organitzat per la Fundación Nueva Cultura del Agua, amb la col•laboració de la Universidad de Sevilla i d’una àmplia sèrie d’institucions relacionades amb la investigació o gestió d’aquest recurs. Considerant l’anàlisi i la diagnosi de la situació actual contingudes a les edicions anteriors (Saragossa 1998 i Porto 2000) i l’ampli debat dels últims anys, el III Congrés Ibèric es caracteritza per un plantejament d’avenç i propostes i per incloure alguns dels aspectes de la política de l’aigua menys atesos fins aleshores

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features