Bond Enhancement Techniques for PCC Whitetopping, HR-341, 1996

This research was initiated in 1991 as a part of a whitetopping project to study the effectiveness of various techniques to enhance bond strength between a new portland cement concrete (PCC) overlay and an existing asphalt cement concrete (ACC) pavement surface. A 1,676 m (5,500 ft) section of county road R16 in Dallas County was divided into 12 test sections. The various techniques used to enhance bond were power brooming, power brooming with air blast, milling, cement and water grout, and emulsion tack coat. Also, two sections were planed to a uniform cross-section, two pavement thicknesses were placed, and two different concrete mix proportions were used. Bond strength was perceived to be the key to determining an appropriate design procedure for whitetopping. If adequate bond is achieved, a bonded PCC overlay technique can be used for design. Otherwise, an unbonded overlay procedure may be more appropriate. Conclusions are as follows: (1) Bond Strength Differences - Milling increased bond strength versus no milling. Tack coat showed increased bond strength versus no tack coat. Planing, Air Blast and Grouting did not provide noticeable improvements in bond strength; nor did different PCC types or thicknesses affect bond strength significantly. (2) Structure - Structural measurements correlated strongly with the wide variation in pavement thicknesses. They did not provide enough information to determine the strength of bonding or the level of support being provided by the ACC layer. Longitudinal cracking correlated with PCC thicknesses and with planing. (3) Bond Over Time - The bond between PCC and ACC layers is degrading over time in the outside wheel path in all of the sections except tack coat (section 12). The bond strength in the section with tack coat was lower than the others, but remained relatively steady.

Construction Automation Using Pen-Based Computers, HR-368, 1996

The Iowa Department of Transportation is committed to improved management systems, which in turn has led to increased automation to record and manage construction data. A possible improvement to the current data management system can be found with pen-based computers. Pen-based computers coupled with user friendly software are now to the point where an individual's handwriting can be captured and converted to typed text to be used for data collection. It would appear pen-based computers are sufficiently advanced to be used by construction inspectors to record daily project data. The objective of this research was to determine: (1) if pen-based computers are durable enough to allow maintenance-free operation for field work during Iowa's construction season; and (2) if pen-based computers can be used effectively by inspectors with little computer experience. The pen-based computer's handwriting recognition was not fast or accurate enough to be successfully utilized. The IBM Thinkpad with the pen pointing device did prove useful for working in Windows' graphical environment. The pen was used for pointing, selecting and scrolling in the Windows applications because of its intuitive nature.

Biodistribution of anti-CEA F(ab')2 fragments after intra-arterial and intravenous injection in patients with liver metastases due to colorectal carcinoma.

The biodistribution of simultaneous intra-arterial and intravenous injections of a radiolabelled anti-CEA MAb F(ab')2 fragment was studied in three patients with liver metastases from colorectal cancer. Identical MAb fragments, labelled with either 125I or 131I, were injected over a period of 30 min into the hepatic artery and into a peripheral vein. After 1 or 2 days, biodistribution was measured in the surgically removed metastases, normal tissue samples and blood. By tissue radioactivity counting, tumour uptake in the range 6.3-9.1% of injected dose per gram was found. Superimposable metastasis-to-blood and metastasis-to-normal liver ratios were obtained for both iodine isotopes in all three patients. The results indicate that the intra-arterial injection of MAb F(ab')2 fragments gives no measurable advantage over more convenient injections into a peripheral vein.

B-1 Monthly Report of Medical Services Provided under Title XIX of the Social Security Act, March 2014

B-1 Medicaid Reports -- The monthly Medicaid series of eight reports provide summaries of Medicaid eligibles, recipients served, and total payments by county, category of service, and aid category. These reports may also be known as the B-1 Reports. These reports are each available as a PDF for printing or as a CSV file for data analysis. Report Report name IAMM1800-R001--Medically Needy by County - No Spenddown and With Spenddown; IAMM1800-R002--Total Medically Needy, All Other Medicaid, and Grand Total by County; IAMM2200-R002--Monthly Expenditures by Category of Service; IAMM2200-R003--Fiscal YTD Expenditures by Category of Service; IAMM3800-R001--ICF & ICF-MR Vendor Payments by County; IAMM4400-R001--Monthly Expenditures by Eligibility Program; IAMM4400-R002--Monthly Expenditures by Category of Service by Program; IAMM4600-R002--Elderly Waiver Summary by County.

Structural Analysis of Aggregate Blends Using the SHRP Gyratory Compactor, MLR-95-8, 1996

The Iowa Department of Transportation (IDOT) received a Strategic Highway Research Program (SHRP) gyratory compactor in December 1994. Since then IDOT has been studying the ability of the compactor to analyze fundamental properties of aggregates such as shape, texture, and gradation by studying the volumetrics of the aggregate blends under a standard load using the SHRP gyratory compactor. This method of analyzing the volumetrics of aggregate blends is similar to SHRP's fine aggregate angularity procedure, which analyzes void levels in noncompacted aggregate blends, which in turn can be used to evaluate the texture or shape of aggregates, what SHRP refers to as angularity. Research is showing that by splitting the aggregate blend on the 2.36-mm (#8) sieve and analyzing the volumetrics or angularity of the separated blend, important fundamental properties can be determined. Most important is structure (the degree and location of aggregate interlock). In addition, analysis of the volumes of the coarse and fine portions can predict the voids in the mineral aggregate and the desired asphalt content. By predicting these properties, it can be determined whether the combined aggregate blend, when mixed with asphalt cement, will produce a mix with structural adequacy to carry the designed traffic load.

Iowa Ultra Thin Whitetopping at Two Years of Age, HR-559, 1996

An 11.6 km research project was constructed in 1994 on a portion of Iowa Highway 21 in Iowa County, from U.S. 6 to Iowa Highway 212. This research is intended to evaluate the effect of four primary variables on long term performances of the PCC concrete overlay, commonly called whitetopping. The variables are thickness (50 mm, 100 mm, 150 mm, and 200 mm), joint spacing (0.6 m squares, 1.2 m squares, 1.8 m squares, and 4.6 m spacing), fiber use (concrete with and without polypropolene fibers) and surface preparation (patch only, scarifying the surface, and cold-in-place recycling). After two years, only two sections exhibit a small amount of debonding and distress cracking. Both sections are 50 mm thick. Within each of these two sections, only 2% of the area is affected. Two other 50 mm thick sections have a small number of cracks but no debonding has been found. No adverse effects of these cracks are evident. Three asphalt overlay sections were also constructed. In each asphalt section, transverse cracks have recently been found. At two years of age, the research sections are performing very well. An insignificant number of cracks and no distressed areas have been found in any research sections thicker than 50 mm.

Variations of Tine Texturing of PCC Pavement, MLR-93-4, 1996

Seven experimental texture sections were constructed on the Polk-Jasper RP-163-1(50)--16--77 project just east of Des Moines. The experimental sections included two groove depths for a longitudinal tine texture and 13 mm (1/2 in.), 19 mm (1 in.) and variable spaced transverse tine textures. An artificial turf textured section was also included. Friction values and a rating of objectionable noise were determined for all sections. All transverse tine textures generated a high level of objectionable noise. The longitudinal tine texture was rated very good in regard to objectionable noise. At this time, all tined textures are providing satisfactory friction values.

B-1 Monthly Report of Medical Services Provided under Title XIX of the Social Security Act, May 2014

B-1 Medicaid Reports -- The monthly Medicaid series of eight reports provide summaries of Medicaid eligibles, recipients served, and total payments by county, category of service, and aid category. These reports may also be known as the B-1 Reports. These reports are each available as a PDF for printing or as a CSV file for data analysis. Report Report name IAMM1800-R001--Medically Needy by County - No Spenddown and With Spenddown; IAMM1800-R002--Total Medically Needy, All Other Medicaid, and Grand Total by County; IAMM2200-R002--Monthly Expenditures by Category of Service; IAMM2200-R003--Fiscal YTD Expenditures by Category of Service; IAMM3800-R001--ICF & ICF-MR Vendor Payments by County; IAMM4400-R001--Monthly Expenditures by Eligibility Program; IAMM4400-R002--Monthly Expenditures by Category of Service by Program; IAMM4600-R002--Elderly Waiver Summary by County.

Actualización en Odontopediatría 1996

En el presente trabajo se analizan las publicaciones relacionadas con la odontopediatría aparecidas durante el año 1996. Debido a la gran cantidad de artículos publicados, éstos se han distribuido en cinco distintos apartados: 1 . Manejo de la conducta, 2. Operatoria dental, 3. Pulpa, 4. Traumatismos, y S. Miscelánea.

La pertinence en science forensique. Une (en)quête épistémologique et empirique

A criminal investigation requires to search and to interpret vestiges of a criminal act that happened in a past time. The forensic investigator arises in this context as a critical reader of the investigation scene, in search of physical traces that should enable her to tell a story of the offence/crime which allegedly occurred. The challenge of any investigator is to detect and recognise relevant physical traces in order to provide forensic clues for investigation and intelligence purposes. Inspired by this obser- vation, the current research focuses on the following questions : What is a relevant physical trace? And, how does the forensic investigator know she is facing one ? The interest of such questions is to provide a definition of a dimension often used in forensic science but never studied in its implications and operations. This doctoral research investigates scientific paths that are not often explored in forensic science, by using semiotic and sociological tools combined with statistical data analysis. The results are shown following a semiotic path, strongly influenced by Peir- ce's studies, and a second track, called empirical, where investigations data were analysed and forensic investigators interviewed about their work practices in the field. By the semiotic track, a macroscopic view is given of a signification process running from the discove- red physical trace at the scene to what is evaluated as being relevant for the investigator. The physical trace is perceived in the form of several signs, whose meaning is culturally codified. The reasoning should consist of three main steps : 1- What kind of source does the discovered physical trace refer to ? 2- What cause/activity is at the origin of this source in the specific context of the case ? 3- What story can be told from these observations ? The stage 3 requires to reason in creating hypotheses that should explain the presence of the discovered trace coming from an activity ; the specific activity that is related to the investigated case. To validate this assumption, it would depend on their ability to respond to a rule of relevancy. The last step is the symbolisation of the relevancy. The rule would consist of two points : the recognition of the factual/circumstantial relevancy (Is the link between the trace and the case recognised with the formulated hypothesis ? ) and appropriate relevancy (What investment is required to collect and analyse the discovered trace considering the expected outcome at the investigation/intelligence level?). This process of meaning is based on observations and a conjectural reasoning subject to many influences. In this study, relevancy in forensic science is presented as a conventional dimension that is symbolised and conditioned by the context, the forensic investigator's practice and her workplace environment (culture of the place). In short, the current research states relevancy results of the interactions between parameters from situational, structural (or organisational) and individual orders. The detection, collection and analysis of relevant physical traces at scenes depends on the knowledge and culture mastered by the forensic investigator. In the study of the relation relevant trace-forensic investigator, this research introduces the KEE model as a conceptual map that illustrates three major areas of forensic knowledge and culture acquisition, involved in the research and evaluation of the relevant physical trace. Through the analysis of the investigation data and interviews, the relationship between those three parameters and the relevancy was highlighted. K, for knowing, embodies a rela- tionship to the immediate knowledge allowing to give an overview of the reality at a specific moment ; an important point since relevancy is signified in a context. E, for education, is considered through its relationship with relevancy via a culture that tends to become institutionalised ; it represents the theoretical knowledge. As for the parameter E, for experience, it exists in its relation to relevancy in the adjustments of the strategies of intervention (i.e a practical knowledge) of each practitioner having modulated her work in the light of success and setbacks case after case. The two E parameters constitute the library resources for the semiotic recognition process and the K parameter ensures the contextualisation required to set up the reasoning and to formulate explanatory hypotheses for the discovered physical traces, questioned in their relevancy. This research demonstrates that the relevancy is not absolute. It is temporal and contextual; it is a conventional and relative dimension that must be discussed. This is where the whole issue of the meaning of what is relevant to each stakeholder of the investigation process rests. By proposing a step by step approach to the meaning process from the physical trace to the forensic clue, this study aims to provide a more advanced understanding of the reasoning and its operation, in order to streng- then forensic investigators' training. This doctoral research presents a set of tools critical to both pedagogical and practical aspects for crime scene management while identifying key-influences with individual, structural and situational dimensions. - Une enquête criminelle consiste à rechercher et à faire parler les vestiges d'un acte incriminé passé. L'investigateur forensique se pose dans ce cadre comme un lecteur critique des lieux à la recherche de traces devant lui permettre de former son récit, soit l'histoire du délit/crime censé s'être produit. Le challenge de tout investigateur est de pouvoir détecter et reconnaître les traces dites pertinentes pour fournir des indices forensiques à buts d'enquête et de renseignement. Inspirée par un tel constat, la présente recherche pose au coeur de ses réflexions les questions suivantes : Qu'est-ce qu'une trace pertinente ? Et, comment fait le forensicien pour déterminer qu'il y fait face ? L'intérêt de tels questionnements se comprend dans la volonté de définir une dimension souvent utili- sée en science forensique, mais encore jamais étudiée dans ses implications et fonctionnements. Cette recherche se lance dans des voies d'étude encore peu explorées en usant d'outils sémiotiques et des pratiques d'enquêtes sociologiques combinés à des traitements statistiques de données. Les résultats sont représentés en suivant une piste sémiotique fortement influencée par les écrits de Peirce et une seconde piste dite empirique où des données d'interventions ont été analysées et des investigateurs forensiques interviewés sur leurs pratiques de travail sur le terrain. Par la piste sémiotique, une vision macroscopique du processus de signification de la trace en élément pertinent est représentée. La trace est perçue sous la forme de plusieurs signes dont la signification est codifiée culturellement. Le raisonnement se formaliserait en trois principales étapes : 1- Quel type de source évoque la trace détectée? 2- Quelle cause/activité est à l'origine de cette source dans le contexte précis du cas ? 3- Quelle histoire peut être racontée à partir de ces observations ? Cette dernière étape consiste à raisonner en créant des hypothèses devant expliquer la présence de la trace détectée suite à une activité posée comme étant en lien avec le cas investigué. Pour valider ces hypothèses, cela dépendrait de leur capacité à répondre à une règle, celle de la pertinence. Cette dernière étape consiste en la symbolisation de la pertinence. La règle se composerait de deux points : la reconnaissance de la pertinence factuelle (le lien entre la trace et le cas est-il reconnu dans l'hypothèse fournie?) et la pertinence appropriée (quel est l'investissement à fournir dans la collecte et l'exploitation de la trace pour le bénéfice attendu au niveau de l'investigation/renseignement?). Tout ce processus de signification se base sur des observations et un raisonnement conjectural soumis à de nombreuses influences. Dans cette étude, la pertinence en science forensique se formalise sous les traits d'une dimension conventionnelle, symbolisée, conditionnée par le contexte, la pratique de l'investigateur forensique et la culture du milieu ; en somme cette recherche avance que la pertinence est le fruit d'une interaction entre des paramètres d'ordre situationnel, structurel (ou organisationnel) et individuel. Garantir la détection, la collecte et l'exploitation des traces pertinentes sur les lieux dépend de la connaissance et d'une culture maîtrisées par le forensicien. Dans l'étude du rapport trace pertinente-investigateur forensique, la présente recherche pose le modèle SFE comme une carte conceptuelle illustrant trois grands axes d'acquisition de la connaissance et de la culture forensiques intervenant dans la recherche et l'évaluation de la trace pertinente. Par l'analyse des données d'in- terventions et des entretiens, le rapport entre ces trois paramètres et la pertinence a été mis en évidence. S, pour savoir, incarne un rapport à la connaissance immédiate pour se faire une représentation d'une réalité à un instant donné, un point important pour une pertinence qui se comprend dans un contexte. F, pour formation, se conçoit dans son rapport à la pertinence via cette culture qui tend à s'institutionnaliser (soit une connaissance théorique). Quant au paramètre E, pour expérience, il se comprend dans son rapport à la pertinence dans cet ajustement des stratégies d'intervention (soit une connaissance pratique) de chaque praticien ayant modulé leur travail au regard des succès et échecs enregistrés cas après cas. F et E formeraient la bibliothèque de ressources permettant le processus de reconnaissance sémiotique et S assurerait la contextualisation nécessaire pour poser le raisonnement et formuler les hypothèses explicatives pour les traces détectées et questionnées dans leur pertinence. Ce travail démontre que la pertinence n'est pas absolue. Elle est temporelle et contextuelle, c'est une dimension conventionnelle relative et interprétée qui se doit d'être discutée. C'est là que repose toute la problématique de la signification de ce qui est pertinent pour chaque participant du processus d'investigation. En proposant une lecture par étapes du processus de signification depuis la trace à l'indice, l'étude vise à offrir une compréhension plus poussée du raisonnement et de son fonctionnement pour renforcer la formation des intervenants forensiques. Cette recherche présente ainsi un ensemble d'outils critiques à portée tant pédagogiques que pratiques pour la gestion des lieux tout en identifiant des influences-clé jouées par des dimensions individuelles, structurelles et situationnelles.

B-1 Monthly Report of Medical Services Provided under Title XIX of the Social Security Act, June 2014

B-1 Medicaid Reports -- The monthly Medicaid series of eight reports provide summaries of Medicaid eligibles, recipients served, and total payments by county, category of service, and aid category. These reports may also be known as the B-1 Reports. These reports are each available as a PDF for printing or as a CSV file for data analysis. Report Report name IAMM1800-R001--Medically Needy by County - No Spenddown and With Spenddown; IAMM1800-R002--Total Medically Needy, All Other Medicaid, and Grand Total by County; IAMM2200-R002--Monthly Expenditures by Category of Service; IAMM2200-R003--Fiscal YTD Expenditures by Category of Service; IAMM3800-R001--ICF & ICF-MR Vendor Payments by County; IAMM4400-R001--Monthly Expenditures by Eligibility Program; IAMM4400-R002--Monthly Expenditures by Category of Service by Program; IAMM4600-R002--Elderly Waiver Summary by County.

B-1 Monthly Report of Medical Services Provided under Title XIX of the Social Security Act, July 2014

B-1 Medicaid Reports -- The monthly Medicaid series of eight reports provide summaries of Medicaid eligibles, recipients served, and total payments by county, category of service, and aid category. These reports may also be known as the B-1 Reports. These reports are each available as a PDF for printing or as a CSV file for data analysis. Report Report name IAMM1800-R001--Medically Needy by County - No Spenddown and With Spenddown; IAMM1800-R002--Total Medically Needy, All Other Medicaid, and Grand Total by County; IAMM2200-R002--Monthly Expenditures by Category of Service; IAMM2200-R003--Fiscal YTD Expenditures by Category of Service; IAMM3800-R001--ICF & ICF-MR Vendor Payments by County; IAMM4400-R001--Monthly Expenditures by Eligibility Program; IAMM4400-R002--Monthly Expenditures by Category of Service by Program; IAMM4600-R002--Elderly Waiver Summary by County.

Technology News, April 1996

Technology News is a newsletter produced by the Iowa Department of Transportation to provide information to the transportation specialist in Iowa's cities and counties. Technology News is one of CTRE's primary avenues for exchanging transportation-related information with local agencies. The bimonthly newsletter gives an up-to-date look to the up-to-date information our 2,500+ readers have grown to expect.

Technology News, August 1996

Technology News is a newsletter produced by the Iowa Department of Transportation to provide information to the transportation specialist in Iowa's cities and counties. Technology News is one of CTRE's primary avenues for exchanging transportation-related information with local agencies. The bimonthly newsletter gives an up-to-date look to the up-to-date information our 2,500+ readers have grown to expect.

Technology News, December 1996

Technology News is a newsletter produced by the Iowa Department of Transportation to provide information to the transportation specialist in Iowa's cities and counties. Technology News is one of CTRE's primary avenues for exchanging transportation-related information with local agencies. The bimonthly newsletter gives an up-to-date look to the up-to-date information our 2,500+ readers have grown to expect.