Potential impact of invasive anuran species in western Newfoundland

Successful dispersal and establishment of invasive anurans (frogs and toads) may be influenced by competitive exclusion and/or niche differentiation with competing species. I investigated the dispersal of anurans in western Newfoundland using anuran calling surveys and pond-edge visual encounter surveys. The Mink Frog, Lithobates septentrionalis, had dispersed ~50 km northeast from the original (2001) discovery location and ~34 km southwest; displaying spatial separation from Green Frogs, Lithobates clamitans, at landscape and local scales. Visual encounter surveys did not reveal any correlation between adult Mink Frogs and odonate competitors. Additionally, I assessed the impact of varying tadpole densities on removal of epilithic periphyton by providing epilithon covered substrates for American Toad, Anaxyrus americanus, tadpoles raised in laboratory or field enclosures. Higher tadpole densities resulted in smaller tadpoles that removed more periphyton from substrates. As anuran population ranges expand, there may be effects on ecological resources for vertebrate and invertebrate competitors.

Geochemistry of the water column of southern lake Baikal during 1967-2005

At present, when the influence of human economic activity is progressively increasing, significant attention is devoted to the state of water ecosystems. All researchers engaged in these problems agree that the state of the water system (pollution and eutrophication) can only be estimated on the basis of long-term researches. Systemic monitoring (at least once per month) of ionic components (Ca2+, Mg2+, Na+, K+, bicarbonates, sulfates, and chlorides) in unfiltered water of Lake Baikal and its tributaries had been carried out under the supervision of Votintsev since 1947. Based on the analysis of systematic data on trophic components obtained during 1965-2005, we tried to estimate the present-day trophic status of the pelagic zone in the lake, define the trend of long-term changes of trophic components and understand the reasons of the distortion of cyclicity in the development of spring diatom algae, which create a favorable environment in any water basin. It should be noted that the station near Cape Polovinnyi is located 20 km away from the town of Baikal'sk. Wastewaters of the Baikal'sk pulp and paper mill is the main source of dioxins and furans in Baikal. Based on the significant difference between sulfate contents in wastewaters of the plant (>300 mg/l), tributaries of Baikal (7.5 mg/l), and waters in the southern part of the lake (3.9 mg/l), we defined the following periods: (i) period of natural seasonal patterns until 1967-1968 (prior to putting the Baikal'sk Mill into operation; (ii) period of weak anthropogenic pollution (1969-1985); and (iii) period of strong anthropogenic pollution since 1986.

(Table1) Frequency of well defined bioturbation in sediments of the Eckernförder Bay, Western Baltic Sea

The lamination and burrowing patterns in 17 box cores were analyzed with the aid of X-ray photographs and thin sections. A standardized method of log plotting made statistical analysis of the data possible. Several 'structure types' were established, although it was realized that the boundaries are purely arbitrary divisions in what can sometimes be a continuous sequence. In the transition zone between marginal sand facies and fine-grained basin facies, muddy sediment is found which contains particularly well differentiated, alternating laminae. This zone is also characterized by layers rich in plant remains. The alternation of laminae shows a high degree of statistical scattering. Even though a small degree of cyclic periodicity could be defined, it was impossible to correlate individual layers from core to core across the bay. However, through a statistical handling of the plots, zones could be separated on the basis of the number of sand layers they contained. These more or minder sandy zones clarified the bottom reflections seen in the records of the echograph from the area. The manner of facies change across the bay, suggests that no strong bottom currents are effective in the Eckernförde Bay. The marked asymmetry between the north and south flanks of the profile can be attributed to the stronger action of waves on the more exposed areas. Grain size analyses were made from the more homogeneous units found in a core from the transition-facies zone. The results indicate that the most pronounced differences between layers appear in the silt range, and although the differences are slight, they are statistically significant. Layers rich in plant remains were wet-sieved in order to separate the plant detritus. This was than analyzed in a sediment settling balance and found to be hydrodynamically equivalent to a well-sorted, finegrained sand. A special, rhythmic cross-bedding type with dimensions in the millimeter range, has been named 'Crypto-cross-lamination' and is thought to represent rapid sedimentation in an area where only very weak bottom currents are present. It is found only in the deepest part of the basin. Relatively large sand grains, scattered within layers of clayey-silty matrix, seem to be transported by flotation. Thin section examination showed that the inner part of Eckernförder Bay carbonate grains (e. g. Foraminifera shells) were preserved throughout the cores, while in the outer part of the bay they were not present. Well defined tracks and burrows are relatively rare in all of the facies in comparision to the generally strongly developed deformation burrowing. The application of special measures for the deformation burrowing allowed to plot their intensity in profile for each core. A degree of regularity could be found in these burrowing intensity plots, with higher values appearing in the sandy facies, but with no clear differences between sand and silt layers in the transition facies. Small sections in the profiles of the deepest part of the bay show no bioturbation at all.

Deictic Demonstratives in Japanese, Finnish and Swedish : First and Third Language Perspectives

The goal of this thesis is twofold. Firstly, it investigates the actual, native use of spatial-deictic demonstratives in Japanese, Finnish and Swedish. Secondly, it investigates and elucidates the interlanguage of Finnish-speaking and Swedish-speaking learners of Japanese regarding their use of Japanese spatial-deictic demonstratives in the light of respective native use and, in comparison to the descriptions of demonstratives in the teaching materials used. Thus, the present study deals with analyses of two sets of empirical data: data produced by native-speaking informants (L1 data) and data produced by language learners (L2 data). These were elicited by Discourse Completion Tasks (DCTs) designed, collected and analyzed using both quantitative and qualitative methods by the author. The results showed that the actual use of demonstratives by the native informants was not always in accordance with the way described in grammars. The typological similarities between Japanese and Finnish were in this study not reflected in the native use of demonstratives, and some uses were not solely based on the spatial relations between the referent, the speaker and the addressee, but rather on social-interactional factors. The main findings regarding the learner data revealed some differences in the usage rate of the demonstratives between the two Finnish-speaking groups and the one Swedish-speaking learner group studied. There were, however, no particular differences found between them regarding the type of demonstrative used. It is suggested that these differences are first and foremost connected both with the teaching materials used and the more or less heterogeneous linguistic environment in which the learners reside, and only thereafter with the typological similarities or differences between their respective native languages, Finnish and Swedish, and the target language, Japanese. It is further argued that the learners’ use of the different Japanese demonstratives, that is the type of demonstrative used, could be explained in terms of familiarity with the grammar. That is, when the situations used in the DCTs were exemplified in teaching materials and were familiar to them, the learners seemed to use Japanese demonstratives as they are described in the teaching materials and as the native Japanese speakers use them. When the situations used in the DCTs were not exemplified in the teaching materials, the learners seem to rely more on their native language. The results, thus, suggest that the learners’ interlanguage is influenced by the grammar of the target language known to the learners, but also by the number of languages (or varieties) that the learners have contact with at the time of learning. The results of the present study have implications for the teaching of Japanese in at least two ways. Firstly, the importance of grammar instruction must be emphasized since its effect on the learners’ language is apparent. Secondly, the contents of teaching materials should be revised on the basis of the native speakers’ actual use of the grammar.

A Video Analysis of Intra- and Inter-professional Leadership Behaviours Within “The Burns Suite”: Identifying Key Leadership Models

Objective Leadership is particularly important in complex highly interprofessional health care contexts involving a number of staff, some from the same specialty (intraprofessional), and others from different specialties (interprofessional). The authors recently published the concept of “The Burns Suite” (TBS) as a novel simulation tool to deliver interprofessional and teamwork training. It is unclear which leadership behaviors are the most important in an interprofessional burns resuscitation scenario, and whether they can be modeled on to current leadership theory. The purpose of this study was to perform a comprehensive video analysis of leadership behaviors within TBS. Methods A total of 3 burns resuscitation simulations within TBS were recorded. The video analysis was grounded-theory inspired. Using predefined criteria, actions/interactions deemed as leadership behaviors were identified. Using an inductive iterative process, 8 main leadership behaviors were identified. Cohen’s κ coefficient was used to measure inter-rater agreement and calculated as κ = 0.7 (substantial agreement). Each video was watched 4 times, focusing on 1 of the 4 team members per viewing (senior surgeon, senior nurse, trainee surgeon, and trainee nurse). The frequency and types of leadership behavior of each of the 4 team members were recorded. Statistical significance to assess any differences was assessed using analysis of variance, whereby a p < 0.05 was taken to be significant. Leadership behaviors were triangulated with verbal cues and actions from the videos. Results All 3 scenarios were successfully completed. The mean scenario length was 22 minutes. A total of 362 leadership behaviors were recorded from the 12 participants. The most evident leadership behaviors of all team members were adhering to guidelines (which effectively equates to following Advanced Trauma and Life Support/Emergency Management of Severe Burns resuscitation guidelines and hence “maintaining standards”), followed by making decisions. Although in terms of total frequency the senior surgeon engaged in more leadership behaviors compared with the entire team, statistically there was no significant difference between all 4 members within the 8 leadership categories. This analysis highlights that “distributed leadership” was predominant, whereby leadership was “distributed” or “shared” among team members. The leadership behaviors within TBS also seemed to fall in line with the “direction, alignment, and commitment” ontology. Conclusions Effective leadership is essential for successful functioning of work teams and accomplishment of task goals. As the resuscitation of a patient with major burns is a dynamic event, team leaders require flexibility in their leadership behaviors to effectively adapt to changing situations. Understanding leadership behaviors of different team members within an authentic simulation can identify important behaviors required to optimize nontechnical skills in a major resuscitation. Furthermore, attempting to map these behaviors on to leadership models can help further our understanding of leadership theory. Collectively this can aid the development of refined simulation scenarios for team members, and can be extrapolated into other areas of simulation-based team training and interprofessional education.

Developing and Delivering L&D Solutions for International Markets

In Chapter 8, ‘Developing and delivering L&D solutions for international markets’, Sa’ad Ali and I examine how different dynamics within and amongst countries can impact the development and delivery of L&D. We build upon the previous chapters, in particular Chapters 5 to 7 that discussed how L&D solutions may be developed in consideration of enhancing engagement, the digital world, and collective and social learning. In doing so, we examine how the effectiveness, and even appropriateness of the concepts discussed in these chapters, may be contingent on country-specific factors such as culture.

The three dimensional model with the affection of stratified density (Caspian Sea)

The hydro dynamical actions in big Lakes directly influence dynamic, physical and chemical affairs. The circulation's models and temperature have something to do with the movements of fluids, and analysis for circulation in Caspian sea is because of the lack of observation through which the circulations and out comings are determined. Through the studies, three dimensional simulations (Large- Scale) are planned and performed, according to Smolakiewicz and Margolin works. This is a non- hydrostatic and Boussinesq approximation is used in its formulation is used in its formulation on the basis of Lipps (1990) theorem and curve lines, the fluid is constant adiabatic and stratified, and the wind power is considered zero. The profile of speed according to previous depth and before ridge can be drawn on the basis of density available between northern and southern ridges. The circulation field is drawn from 3 cm/s to 13 cm/s on the plate z= 5 cm , the vertical changes of speed on the plate is 0.02 m/s. Vertical profile , horizontal speed in previous on, and after the ridges on are drawn on different spaces. It changes from 0.5 cm/s to 1 cm/s before ridges.

Analyse des Ermüdungsverhaltens von Beton anhand der Dehnungsentwicklung

Die Weiterentwicklungen in der Betontechnologie führten in den letzten Jahrzehnten zu Hochleistungsbetonen mit immer höheren Festigkeiten. Der Ermüdungsnachweis wurde jedoch kaum weiterentwickelt und beinhaltet immer noch sehr grobe Herangehensweisen bei der Berücksichtigung des Materialwiderstands von Beton. Für eine grundlegende Weiterentwicklung dieses Nachweises fehlt noch das notwendige Wissen zu den Mechanismen der Betonermüdung. Das Ziel dieser Arbeit war es daher, grundlegende Erkenntnisse zum Ermüdungsverhalten hochfester Betone bei unterschiedlichen zyklischen Beanspruchungen zu ermitteln und hierdurch zu einem besseren Verständnis der Mechanismen der Betonermüdung beizutragen. In der vorliegenden Arbeit wurde das Ermüdungsverhalten eines hochfesten Betons bei Druckschwellbeanspruchung anhand der Dehnungs- und Steifigkeitsentwicklungen untersucht. Betrachtet wurden dabei die Einflüsse der bezogenen Oberspannung, der Belastungsfrequenz und der Wellenform. Zusätzlich wurden, ausgehend von in der Literatur dokumentierten Ansätzen, Versuche bei monoton steigender Beanspruchung und Dauerstandbeanspruchung vergleichend durchgeführt. Die Dehnungs- und Steifigkeitsentwicklungen werden durch die untersuchten Belastungsparameter der Ermüdungsbeanspruchung eindeutig beeinflusst. Charakteristische Zusammenhänge zwischen der Beeinflussung einzelner Kenngrößen der Dehnungs- und Steifigkeitsentwicklung und der Beeinflussung der Bruchlastwechselzahlen wurden aufgezeigt. Anhand der Dehnungen und Steifigkeiten an den Phasenübergängen konnten Hinweise auf beanspru-chungsartabhängige Gefügezustände abgeleitet werden. Die vergleichende Auswertung des Dehnungsverhaltens bei monoton steigender Beanspruchung, Ermüdungsbeanspruchung und Dauerstandbeanspruchung zeigte, dass das Ermüdungsverhalten von Beton nicht adäquat in Anlehnung an andere Beanspruchungsarten beschrieben werden kann. Die Untersuchungsergebnisse wurden in eine Modellvorstellung übertragen, die zur Beurteilung der baustofflichen Phänomene bei zyklischen Beanspruchungen geeignet ist. Dabei wurde die Hypothese aufgestellt, dass sich unterschiedlich ausgeprägte Kleinst-Gefügeveränderungen beanspruchungsabhängig einstellen, die die Entstehung und Ausbreitung von Mikrorissen beeinflussen. Die detaillierte Untersuchung der Dehnungs- und Steifigkeitsentwicklungen führte zu neuen und tiefergehenden Erkenntnissen und sollte ergänzt durch die Betrachtungen von Gefügezuständen zukünftig weiterverfolgt werden.

Desempenho de soja associado à posição do fertilizante e tamanho de sementes

The seed size used for seeding has caused doubts among soybean producers. The study aimed to determine whether there may be differences between seed size with respect to depth of fertilizer deposition. The field experiment was conducted at the Experimental Area UTFPR Campus Pato Branco, using a precision seeder for direct seeding. The design was a randomized blocks, with five repetitions. The treatments were composed by the combination of two seed sizes (large seed with 6,5 mm and 5,5 mm with small seed) and two fertilizer deposition depths in relation to the seed (fertilizer near the seed with about 3 cm away and fertilizer distant from the seeds with about 10 cm). Data were subjected to analysis of variance. When the test value F was significant at 5% probability was applied to the Duncan test for comparison of means. The shallower depth of fertilizer deposition provided larger number of pods per plant and increased number of grains per plant. Already the largest depth of fertilizer deposition provided greater plant height at 30 days after sowing and R2 stage, greater ground area mobilized, higher plant population in all periods, greater depth of deposition of seeds and a higher rate of emergency speed.

Identification and Characterization of New Small Molecule Inhibitors of Picornavirus Replication

The Picornaviridae family consists of positive-strand RNA viruses that are the causative agents of a variety of diseases in humans and animals. Few drugs targeting picornaviruses are available, making the discovery of new antivirals a high priority. Here, we identified and characterized three compounds from a library of kinase inhibitors that block replication of poliovirus, coxsackievirus B3, and encephalomyocarditis virus. The antiviral effect of these compounds is not likely related to their known cellular targets because other inhibitors targeting the same pathways did not inhibit viral replication. Using an in vitro translation-replication system, we showed that these drugs inhibit different stages of the poliovirus life cycle. A4(1) inhibited the formation of a functional replication complex, while E5(1) and E7(2) affected replication after the replication complex had formed. A4(1) demonstrated partial protection from paralysis in a murine model of poliomyelitis. Poliovirus resistant to E7(2) had a single mutation in the 3A protein. This mutation was previously found to confer resistance to enviroxime-like compounds, which target either PI4KIIIβ (major enviroxime-like compounds) or OSBP (minor enviroxime-like compounds), cellular factors involved in lipid metabolism and shown to be important for replication of diverse positive-strand RNA viruses. We classified E7(2) as a minor enviroxime-like compound, because the localization of OSBP changed in the presence of this inhibitor. Interestingly, both E7(2) and major enviroxime-like compound GW5074 interfered with the viral polyprotein processing. Multiple attempts to isolate resistant mutants in the presence of A4(1) or E5(1) were unsuccessful, showing that effective broad-spectrum antivirals could be developed on the basis of these compounds. Studies with these compounds shed light on pathways shared by diverse picornaviruses that could be potential targets for the development of broad-spectrum antiviral drugs.

Rationing medical education.

The purpose of this paper is to discuss the role of rationing in medical education. Medical education is expensive and there is a limit to that which governments, funders or individuals can spend on it. Rationing involves the allocation of resources that are limited. This paper discussed the pros and cons of the application of rationing to medical education and the different forms of rationing that could be applied. Even though some stakeholders in medical education might be taken aback at the prospect of rationing, the truth is that rationing has always occurred in one form or another in medical education and in healthcare more broadly. Different types of rationing exist in healthcare professional education. For example rationing may be implicit or explicit or may be based on macro-allocation or micro-allocation decisions. Funding can be distributed equally among learners, or according to the needs of individual learners, or to ensure that overall usefulness is maximised. One final option is to allow the market to operate freely and to decide in that way. These principles of rationing can apply to individual learners or to institutions or departments or learning modes. Rationing is occurring in medical education, even though it might be implicit. It is worth giving consideration to methods of rationing and to make thinking about rationing more explicit.

A novel methodology for simulating contact-line behavior in capillary-driven flows

Despite the wide swath of applications where multiphase fluid contact lines exist, there is still no consensus on an accurate and general simulation methodology. Most prior numerical work has imposed one of the many dynamic contact-angle theories at solid walls. Such approaches are inherently limited by the theory accuracy. In fact, when inertial effects are important, the contact angle may be history dependent and, thus, any single mathematical function is inappropriate. Given these limitations, the present work has two primary goals: 1) create a numerical framework that allows the contact angle to evolve naturally with appropriate contact-line physics and 2) develop equations and numerical methods such that contact-line simulations may be performed on coarse computational meshes.

Fluid flows affected by contact lines are dominated by capillary stresses and require accurate curvature calculations. The level set method was chosen to track the fluid interfaces because it is easy to calculate interface curvature accurately. Unfortunately, the level set reinitialization suffers from an ill-posed mathematical problem at contact lines: a ``blind spot'' exists. Standard techniques to handle this deficiency are shown to introduce parasitic velocity currents that artificially deform freely floating (non-prescribed) contact angles. As an alternative, a new relaxation equation reinitialization is proposed to remove these spurious velocity currents and its concept is further explored with level-set extension velocities.

To capture contact-line physics, two classical boundary conditions, the Navier-slip velocity boundary condition and a fixed contact angle, are implemented in direct numerical simulations (DNS). DNS are found to converge only if the slip length is well resolved by the computational mesh. Unfortunately, since the slip length is often very small compared to fluid structures, these simulations are not computationally feasible for large systems. To address the second goal, a new methodology is proposed which relies on the volumetric-filtered Navier-Stokes equations. Two unclosed terms, an average curvature and a viscous shear VS, are proposed to represent the missing microscale physics on a coarse mesh.

All of these components are then combined into a single framework and tested for a water droplet impacting a partially-wetting substrate. Very good agreement is found for the evolution of the contact diameter in time between the experimental measurements and the numerical simulation. Such comparison would not be possible with prior methods, since the Reynolds number Re and capillary number Ca are large. Furthermore, the experimentally approximated slip length ratio is well outside of the range currently achievable by DNS. This framework is a promising first step towards simulating complex physics in capillary-dominated flows at a reasonable computational expense.

Modern Computational Chemistry Methods for Prediction of Ground- and Excited-State Properties in Open-Shell Systems

The main goal of the research presented in this work is to provide some important insights about computational modeling of open-shell species. Such projects are: the investigation of the size-extensivity error in Equation-of-Motion Coupled Cluster methods, the analysis of the Long-Range corrected scheme in predicting UV-Vis spectra of Cu(II) complexes with the 4-imidazole acetate and its ethylated derivative, and the exploration of the importance of choosing a proper basis set for the description of systems such as the lithium monoxide anion. The most significant findings of this research are: (i) The contribution of the left operator to the size-extensivity error of the CR-EOMCC(2,3) approach, (ii) The cause of d-d shifts when varying the range-separation parameter and the amount of the exact exchange arising from the imbalanced treatment of localized vs. delocalized orbitals via the "tuned" CAM-B3LYP* functional, (iii) The proper acidity trend of the first-row hydrides and their lithiated analogs that may be reversed if the basis sets are not correctly selected.

Qualified products list 2

The South Carolina Department of Transportation publishes Qualified Products Listings which include pre-qualified materials that may be used on construction and maintenance projects as specified in the project proposal. This document deals with qualified coarse aggregate sources. It is broken down by supplier, location name, SCDOT number, location, fineness modulus, absorption, specific gravity, bulk SSD and soundness loss.

Qualified products list 1

The South Carolina Department of Transportation publishes Qualified Products Listings which include pre-qualified materials that may be used on construction and maintenance projects as specified in the project proposal. This document deals with qualified fine aggregate sources. It is broken down by supplier, location name, SCDOT number, location, fineness modulus, absorption, specific gravity, bulk SSD and soundness loss.