Advancing EDL technologies for future space missions : from ground testing facilities to ablative heatshields

Motivated by recent MSL results where the ablation rate of the PICA heatshield was over-predicted, and staying true to the objectives outlined in the NASA Space Technology Roadmaps and Priorities report, this work focuses on advancing EDL technologies for future space missions.

Due to the difficulties in performing flight tests in the hypervelocity regime, a new ground testing facility called the vertical expansion tunnel is proposed. The adverse effects from secondary diaphragm rupture in an expansion tunnel may be reduced or eliminated by orienting the tunnel vertically, matching the test gas pressure and the accelerator gas pressure, and initially separating the test gas from the accelerator gas by density stratification. If some sacrifice of the reservoir conditions can be made, the VET can be utilized in hypervelocity ground testing, without the problems associated with secondary diaphragm rupture.

The performance of different constraints for the Rate-Controlled Constrained-Equilibrium (RCCE) method is investigated in the context of modeling reacting flows characteristic to ground testing facilities, and re-entry conditions. The effectiveness of different constraints are isolated, and new constraints previously unmentioned in the literature are introduced. Three main benefits from the RCCE method were determined: 1) the reduction in number of equations that need to be solved to model a reacting flow; 2) the reduction in stiffness of the system of equations needed to be solved; and 3) the ability to tabulate chemical properties as a function of a constraint once, prior to running a simulation, along with the ability to use the same table for multiple simulations.

Finally, published physical properties of PICA are compiled, and the composition of the pyrolysis gases that form at high temperatures internal to a heatshield is investigated. A necessary link between the composition of the solid resin, and the composition of the pyrolysis gases created is provided. This link, combined with a detailed investigation into a reacting pyrolysis gas mixture, allows a much needed consistent, and thorough description of many of the physical phenomena occurring in a PICA heatshield, and their implications, to be presented.

Through the use of computational fluid mechanics and computational chemistry methods, significant contributions have been made to advancing ground testing facilities, computational methods for reacting flows, and ablation modeling.

Comment: Food web interactions and biomanipulation in Australian reservoirs

The authors have been studying the control of phytoplankton biomass in several Australian reservoirs. To manipulate fish communities in order to reduce phytoplankton biomass, one needs a thorough understanding of processes in the plankton-associated food webs. In contrast to the situation found in lakes of the northern hemisphere, the planktivorous fish of Australian reservoirs are relatively small and they may deplete small rather than large zooplankters, so that animals as large as the adults of Daphnia carinata may avoid predation. This would result in promotion of Daphnia, particularly if fish eliminate its smaller competitors. The aim of biomanipulation should be the establishment and maintenance of a proper ratio of planktivores/piscivores, adequate for water quality requirements. Successful selection of the appropriate ratio for a given reservoir will depend on the extent of our understanding of its food web interactions. For practical application of biomanipulation in management, further development of the food web theory under Australian conditions is needed.

Diseño e implementación de un sistema para la validación de la recomendación G.1031 y P.1501 de la ITU-T

[ES]El objetivo principal de este trabajo es el diseño y desarrollo de un sistema para la validación de las metodologías propuestas en el borrador de recomendación P.STMWeb [1] “Metodología para la evaluación subjetiva de la calidad percibida en la navegación web”. Como resultado de la validación realizada con el sistema han sido aprobadas las recomendaciones G.1031 [5] “Factores del QoE en web browsing” y P.1501 [6] “Metodología de prueba subjetiva para web browsing” de la ITU-T. El sistema propuesto se ha diseñado en base a las especificaciones marcadas en el borrador de la recomendación en vías de estandarización [P.STMWeb].Estas especificaciones han servido de base para el diseño e implementación de un sistema que permite una navegación web interactiva, con control y actualización de páginas web en base a variaciones de parámetros de red, como el retardo en un entorno controlado. Así mismo siguiendo la metodología establecida en el borrador de recomendación anteriormente mencionado se ha diseñado y desarrollado un sistema de encuestas para evaluar de forma subjetiva la calidad experimentada por los usuarios (QoE) en la navegación web. Para el diseño del sistema de encuestas, se analizaron y utilizaron como especificaciones los diferentes factores que se contemplan en el borrador de recomendación G.QoE-Web [2] “Factores relevantes y casos de uso para la QoE Web” de la ITU-T. En base al diseño realizado, se ha desarrollado un sistema que permite analizar la calidad experimentada por los usuarios en la navegación Web.

A. An investigation of the relation between the tensile strength and (Brinell) hardness of non-ferrous alloys. B. A design of a fatigue testing machine for a college laboratory

[no abstract]

Commercial testing of concrete

The material included within this report is the result of a series of tests of concrete specimens taken during the construction of various buildings in the cities of Pasadena and Los Angeles over a period of eight months.

The object of the problem is to determine the effect of the water ratio on the ultimate strength of the concrete as obtained from data observed and recorded from specimens taken from actual building practice rather than that from laboratory specimens made under ideal, or at least more nearly standard conditions.

Wave-front analysis method of circular aperture sampling for collimation testing

A new type of wave-front analysis method for the collimation testing of laser beams is proposed. A concept of wave-front height is defined, and, on this basis, the wave-front analysis method of circular aperture sampling is introduced. The wave-front height of the tested noncollimated wave can be estimated from the distance between two identical fiducial diffraction planes of the sampled wave, and then the divergence is determined. The design is detailed, and the experiment is demonstrated. The principle and experiment results of the method are presented. Owing to the simplicity of the method and its low cost, it is a promising method for checking the collimation of a laser beam with a large divergence. © 2005 Optical Society of America.