Radiative and total heat transfer measurements to a Titan Explorer model

Radiative and total heat transfer at the flow stagnation point of a 1:40.8 binary scaled model of the Titan Explorer vehicle were measured in the X3 expansion tube. Results from the current study illustrated that with the addition of CH4 into a N2 test gas radiative heat transfer could be detected. For a test gas of 5% CH4 and 95% N2, simulating an atmospheric model for Titanic aerocapture, approximately 4% of the experimentally measured total stagnation point heat transfer was found to be due to radiation. This was in comparison to < 1% measured for a test gas of pure nitrogen. When scaled to the flight vehicle, experimental results indicate a 64% contribution of radiation (test gas 5% CH4/95% N2). Previous numerical results however have predicted this contribution to be between 80-92%. Thus, experimental results from the current study suggest that numerical analyses are over-predicting the radiative heat transfer on the flight vehicle.

Manoeuvring control of fully-actuated marine vehicles : a Port-Hamiltonian system approach to tracking

This paper presents a novel control strategy for trajectory tracking of marine vehicles manoeuvring at low speed. The model of the marine vehicle is formulated as a Port-Hamiltonian system, and the tracking controller is designed using energy shaping and damping assignment. The controller guarantees global asymptotic stability and includes integral action for output variables with relative degree greater than one.

Revolute joint approach to model joint mechanism in water-filled road safety barriers

Portable water-filled road barriers (PWFB) are roadside structures placed on temporary construction zones to separate work site from traffic. Recent changes in governing standards require PWFB to adhere to strict compliance in terms of lateral displacement and vehicle redirectionality. Actual PWFB test can be very costly, thus researchers resort to Finite Element Analysis (FEA) in the initial designs phase. There has been many research conducted on concrete barriers and flexible steel barriers using FEA, however not many was done pertaining to PWFB. This research probes a new technique to model joints in PWFB. Two methods to model the joining mechanism are presented and discussed in relation to its practicality and accuracy. Moreover, the study of the physical gap and mass of the barrier was investigated. Outcome from this research will benefit PWFB research and allow road barrier designers better knowledge in developing the next generation of road safety structures.

The first year experience : looking back to inform the future

The importance of the first year experience (FYE) to success at university has been a focus of attention in the Australian higher education sector since the 1990s. For students a successful transition into university during their first year is now regarded as crucial for student engagement, success and retention. In this review we summarise a decade of research into FYE in the Australasian context. We draw on the findings arising from this comprehensive review of FYE programs and practices to describe FYE trends through the dual lenses of the first year curriculum principles and the generational approach to FYE initiatives. We contend that the generational approach to conceptualising the FYE and first year student engagement has made a useful but limited contribution to our understanding of the first year experience. Acknowledging the criticality of student engagement in a successful FYE, we propose an alternative— the Student Engagement Success and Retention Maturity Model (SESR-MM)— as a sophisticated vehicle for achieving whole-of-institution approaches to the FYE. The SESR-MM embodies the aspirations and characteristics of the transition pedagogy, highlights the need for institutional level evaluation of the FYE, focuses attention on the capacity of institutions to mobilise for first year student engagement, and importantly builds on the generational approach to allow an assessment of institutional capacity to initiate, plan, manage, evaluate and review institutional FYE practices.

Using police crash databases for injury prevention research - a comparison of opt-out and opt-in approaches to study recruitment

Objective: The study aimed to examine the difference in response rates between opt-out and opt-in participant recruitment in a population-based study of heavy-vehicle drivers involved in a police-attended crash. Methods: Two approaches to subject recruitment were implemented in two different states over a 14-week period and response rates for the two approaches (opt-out versus opt-in recruitment) were compared. Results: Based on the eligible and contactable drivers, the response rates were 54% for the optout group and 16% for the opt-in group. Conclusions and Implications: The opt-in recruitment strategy (which was a consequence of one jurisdiction’s interpretation of the national Privacy Act at the time) resulted in an insufficient and potentially biased sample for the purposes of conducting research into risk factors for heavy-vehicle crashes. Australia’s national Privacy Act 1988 has had a long history of inconsistent practices by state and territory government departments and ethical review committees. These inconsistencies can have profound effects on the validity of research, as shown through the significantly different response rates we reported in this study. It is hoped that a more unified interpretation of the Privacy Act across the states and territories, as proposed under the soon-to-be released Australian Privacy Principles will reduce the recruitment challenges outlined in this study.

Motor Accident Insurance Act 1994 s45 - whether obligation to co-operate may authorise order requiring commencement of proceedings by minor prior to expiration of limitation period

In Australian Associated Motor Insurers Ltd v McPaul; Council of the City of Gold Coast v McPaul [2005] QSC 278 the applicant insurer sought an order requiring a claimant who had been injured in a motor vehicle accident some years earlier when he was five years old to commence a proceeding to determine the question of the applicant's liability to him. The applicant's interest in seeking the order was to avoid the prejudice which could follow from further delay, particularly delay until the respondent became obliged to commence proceedings to avoid a limitations bar.

Построение автоматической навигационной системы малогабаритного беспилотного летательного аппарата многократного применения = Development of automatic navigation management system for small unmanned aerial vehicle

Современный этап развития комплексов автоматического управления и навигации малогабаритными БЛА многократного применения предъявляет высокие требования к автономности, точности и миниатюрности данных систем. Противоречивость требований диктует использование функционального и алгоритмического объединения нескольких разнотипных источников навигационной информации в едином вычислительном процессе на основе методов оптимальной фильтрации. Получили широкое развитие бесплатформенные инерциальные навигационные системы (БИНС) на основе комплексирования данных микромеханических датчиков инерциальной информации и датчиков параметров движения в воздушном потоке с данными спутниковых навигационных систем (СНС). Однако в современных условиях такой подход не в полной мере реализует требования к помехозащищённости, автономности и точности получаемой навигационной информации. Одновременно с этим достигли значительного прогресса навигационные системы, использующие принципы корреляционно экстремальной навигации по оптическим ориентирам и цифровым картам местности. Предлагается схема построения автономной автоматической навигационной системы (АНС) для БЛА многоразового применения на основе объединения алгоритмов БИНС, спутниковой навигационной системы и оптической навигационной системы. The modern stage of automatic control and guidance systems development for small unmanned aerial vehicles (UAV) is determined by advanced requirements for autonomy, accuracy and size of the systems. The contradictory of the requirements dictates novel functional and algorithmic tight coupling of several different onboard sensors into one computational process, which is based on methods of optimal filtering. Nowadays, data fusion of micro-electro mechanical sensors of inertial measurement units, barometric pressure sensors, and signals of global navigation satellite systems (GNSS) receivers is widely used in numerous strap down inertial navigation systems (INS). However, the systems do not fully comply with such requirements as jamming immunity, fault tolerance, autonomy, and accuracy of navigation. At the same time, the significant progress has been recently demonstrated by the navigation systems, which use the correlation extremal principle applied for optical data flow and digital maps. This article proposes a new architecture of automatic navigation management system (ANMS) for small UAV, which combines algorithms of strap down INS, satellite navigation and optical navigation system.

A three-phase to single-phase matrix converter based bi-directional IPT system for charging electric vehicles

This paper presents a novel three-phase to single-phase matrix converter (TSMC) based bi-directional inductive power transfer (IPT) system for vehicle-to-grid (V2G) applications. In contrast to existing techniques, the proposed technique which employs a TSMC to drive an 8th order high frequency resonant network, requires only a single-stage power conversion process to facilitate bi-directional power transfer between electric vehicles (EVs) and a three-phase utility power supply. A mathematical model is presented to demonstrate that both magnitude and direction of power flow can be controlled by regulating either relative phase angles or magnitudes of voltages generated by converters. The viability of the proposed mathematical model is verified using simulated results of a 10 kW bi-directional IPT system and the results suggest that the proposed system is efficient, reliable and is suitable for high power applications which require contactless power transfer.

Evaluation of emerging intelligent transport systems to improve safety on level crossings : an overview

Safety at railway level crossings (RLX) is one part of a wider picture of safety within the whole transport system. Governments, the rail industry and road organisations have used a variety of countermeasures for many years to improve RLX safety. New types of interventions are required in order to reduce the number of crashes and associated social costs at railway crossings. This paper presents the results of a large research program which aimed to assess the effectiveness of emerging Intelligent Transport Systems (ITS) interventions, both on-road and in-vehicle based, to improve the safety of car drivers at RLXs in Australia. The three most promising technologies selected from the literature review and focus groups were tested in an advanced driving simulator to provide a detailed assessment of their effects on driver behaviour. The three interventions were: (i) in-vehicle visual warning using a GPS/smartphone navigation-like system, (ii) in-vehicle audio warning and; (iii) on-road intervention known as valet system (warning lights on the road surface activated as a train approaches). The effects of these technologies on 57 participants were assessed in a systematic approach focusing on the safety of the intervention, effects on the road traffic around the crossings and driver’s acceptance of the technology. Given that the ITS interventions were likely to provide a benefit by improving the driver’s awareness of the crossing status in low visibility conditions, such conditions were investigated through curves in the track before arriving at the crossing. ITS interventions were also expected to improve driver behaviour at crossings with high traffic (blocking back issue), which were also investigated at active crossings. The key findings are: (i) interventions at passive crossings are likely to provide safety benefits; (ii) the benefits of ITS interventions on driver behaviour at active crossings are limited; (iii) the trialled ITS interventions did not show any issues in terms of driver distraction, driver acceptance or traffic delays; (iv) these interventions are easy to use, do not increase driver workload substantially; (v) participants’ intention to use the technology is high and; (vi) participants saw most value in succinct messages about approaching trains as opposed to knowing the RLX locations or the imminence of a collision with a train.

Willingness-to-pay for infrastructure investments for alternative fuel vehicles

This study investigates potential demand for infrastructure investment for alternative fuel vehicles by applying stated preference methods to a Japanese sample. The potential demand is estimated on the basis of how much people are willing to pay for alternative fuel vehicles under various refueling scenarios. Using the estimated parameters, the economic efficiency of establishing battery-exchange stations for electric vehicles is examined. The results indicate that infrastructural development of battery-exchange stations can be efficient when electric vehicle sales exceed 5.63% of all new vehicle sales. Further, we find a complementary relationship between the cruising ranges of alternative fuel vehicles and the infrastructure established.

When to pull the plug and when to take the plunge : timing strategic decisions about new ventures

It is not uncommon for firms to explore a new venture under the belief it will generate profits, only to find out later that although costs accumulated, profits did not materialize. To manage the high level of uncertainty involved in this process, new ventures are generally designed as vehicles of exploration (Wu, 2012) that allow for a staged investment of resources, starting with small initial investments that can be scaled up or discontinued as uncertainty is resolved over time (Folta, 1998; Li and Chi, 2013). As such, new ventures provide firms a vehicle by which they can probe an uncertain future (Brown and Eisenhardt, 1997) without fully committing early on to an irreversible course of action (Folta, Johnson, and O’Brien, 2006). Our focus in the present paper is on the timing of strategic decisions that firms make regarding their exploration ventures. Prior research in the fields of entrepreneurship, real options reasoning, and decision speed has demonstrated a link between the timing of making decisions and performance (Baum and Wally, 2003; Eisenhardt, 1989; Judge and Miller, 1991). The antecedents to the timing of decisions, however, are less understood and pose an interesting dilemma.

Boosting the effects of a curriculum based injury prevention program through a school connectedness intervention : final report to NRMA-ACT Road Safety Trust

Injury is the leading cause of death among young people (AIHW, 2008). A primary contributing factor to injury among adolescents is risk taking behaviour, including road related risks such as risky bicycle and motorcycle use and riding with dangerous or drink-drivers. Injury rates increase dramatically throughout adolescence, at the same time as adolescents are becoming more involved in risk taking behaviour. Also throughout this period, adolescents‟ connectedness to school is decreasing (Monahan, Oesterle & Hawkins, 2010; Whitlock, 2004). School connectedness refers to „the extent to which students feel personally accepted, respected, included, and supported by others in the school‟ (Goodenow, 1993, p. 80), and has been repeatedly shown to be a critical protective factor in adolescent development. For example, school connectedness has been shown to be associated with decreased risk taking behaviour, including violence and alcohol and other drug use (e.g., Resnick et al., 1997), as well as with decreased transport risk taking and vehicle related injuries (Chapman et al., accepted April 2011). This project involved the pilot evaluation of a school connectedness intervention (a professional development program for teachers) to reduce adolescent risk taking behaviour and injury. This intervention has been developed for use as a component of the Skills for Preventing Injury in Youth (SPIY) curriculum based injury prevention program for early adolescents. The objectives of this research were to: 1. Implement a trial School Connectedness intervention (professional development program for teachers) in ACT high schools, and evaluate using comparison high schools. 2. Determine whether the School Connectedness program impacts on adolescent risk taking behaviour and associated injuries (particularly transport risks and injuries). 3. Evaluate the process effectiveness of the School Connectedness program.

Understanding public response to a congestion charge : a random-effects ordered logit approach

Public acceptance is consistently listed as having an enormous impact on the implementation and success of a congestion charge scheme. This paper investigates public acceptance of such a scheme in Australia. Surveys were conducted in Brisbane and Melbourne, the two fastest growing Australian cities. Using an ordered logit modeling approach, the survey data including stated preferences were analyzed to pinpoint the important factors influencing people’s attitudes to a congestion charge and, in turn, to their transport mode choices. To accommodate the nature of, and to account for the resulting heterogeneity of the panel data, random effects were considered in the models. As expected, this study found that the amount of the congestion charge and the financial benefits of implementing it have a significant influence on respondents’ support for the charge and on the likelihood of their taking a bus to city areas. However, respondents’ current primary transport mode for travelling to the city areas has a more pronounced impact. Meanwhile, respondents’ perceptions of the congestion charge’s role in protecting the environment by reducing vehicle emissions, and of the extent to which the charge would mean that they travelled less frequently to the city for shopping or entertainment, also have a significant impact on their level of support for its implementation. We also found and explained notable differences across two cities. Finally, findings from this study have been fully discussed in relation to the literature.