Integrated luminescent chemical microsensors based on GaN LEDs for security applications using smartphones

Development of PCB-integrateable microsensors for monitoring chemical species is a goal in areas such as lab-on-a-chip analytical devices, diagnostics medicine and electronics for hand-held instruments where the device size is a major issue. Cellular phones have pervaded the world inhabitants and their usefulness has dramatically increased with the introduction of smartphones due to a combination of amazing processing power in a confined space, geolocalization and manifold telecommunication features. Therefore, a number of physical and chemical sensors that add value to the terminal for health monitoring, personal safety (at home, at work) and, eventually, national security have started to be developed, capitalizing also on the huge number of circulating cell phones. The chemical sensor-enabled “super” smartphone provides a unique (bio)sensing platform for monitoring airborne or waterborne hazardous chemicals or microorganisms for both single user and crowdsourcing security applications. Some of the latest ones are illustrated by a few examples. Moreover, we have recently achieved for the first time (covalent) functionalization of p- and n-GaN semiconductor surfaces with tuneable luminescent indicator dyes of the Ru-polypyridyl family, as a key step in the development of innovative microsensors for smartphone applications. Chemical “sensoring” of GaN-based blue LED chips with those indicators has also been achieved by plasma treatment of their surface, and the micrometer-sized devices have been tested to monitor O2 in the gas phase to show their full functionality. Novel strategies to enhance the sensor sensitivity such as changing the length and nature of the siloxane buffer layer are discussed in this paper.

A constraint-based approach to quality assurance in service choreographies.

Knowledge about the quality characteristics (QoS) of service com- positions is crucial for determining their usability and economic value. Ser- vice quality is usually regulated using Service Level Agreements (SLA). While end-to-end SLAs are well suited for request-reply interactions, more complex, decentralized, multiparticipant compositions (service choreographies) typ- ically involve multiple message exchanges between stateful parties and the corresponding SLAs thus encompass several cooperating parties with interde- pendent QoS. The usual approaches to determining QoS ranges structurally (which are by construction easily composable) are not applicable in this sce- nario. Additionally, the intervening SLAs may depend on the exchanged data. We present an approach to data-aware QoS assurance in choreographies through the automatic derivation of composable QoS models from partici- pant descriptions. Such models are based on a message typing system with size constraints and are derived using abstract interpretation. The models ob- tained have multiple uses including run-time prediction, adaptive participant selection, or design-time compliance checking. We also present an experimen- tal evaluation and discuss the benefits of the proposed approach.

Rheological behaviour and functionality of inulin-extra virgin olive oil-based mashed potatoes

Developing products having a high nutritional value and good storage stability during freezing is a challenge. Inulin (I) and extra virgin olive oil (EVOO) have interesting functional properties. The e?ect of the addition of I and EVOO blends at di?erent I:EVOO ratios (0:0, 0:60, 15:45, 30:30, 45:15, 60:0, 30:45 and 45:30) on the rheological, physical, sensory and structural properties of fresh and frozen ? thawed mashed potatoes formulated without and with added cryoprotectants was analysed and compared. Addition of I and EVOO (either alone or blended) reduced apparent viscosity and pseudoplasticity producing softer systems, indicating that both ingredients behave as soft ?llers. Samples with added I at the higher concentrations )1 (?45 g kg ) showed lower ?ow index and consistency, which is related to formation of smaller I particles; microphotographs indicated that gelling properties of I depended mostly upon processing. Frozen ? thawed samples were judged more acceptable and creamier than their fresh counterparts.

Valuation: Developer support for by-references to by-value type conversion.

Modern object oriented languages like C# and JAVA enable developers to build complex application in less time. These languages are based on selecting heap allocated pass-by-reference objects for user defined data structures. This simplifies programming by automatically managing memory allocation and deallocation in conjunction with automated garbage collection. This simplification of programming comes at the cost of performance. Using pass-by-reference objects instead of lighter weight pass-by value structs can have memory impact in some cases. These costs can be critical when these application runs on limited resource environments such as mobile devices and cloud computing systems. We explore the problem by using the simple and uniform memory model to improve the performance. In this work we address this problem by providing an automated and sounds static conversion analysis which identifies if a by reference type can be safely converted to a by value type where the conversion may result in performance improvements. This works focus on C# programs. Our approach is based on a combination of syntactic and semantic checks to identify classes that are safe to convert. We evaluate the effectiveness of our work in identifying convertible types and impact of this transformation. The result shows that the transformation of reference type to value type can have substantial performance impact in practice. In our case studies we optimize the performance in Barnes-Hut program which shows total memory allocation decreased by 93% and execution time also reduced by 15%.

Characterization of ICT-based business models of social enterprises

In recent years new models for organizations working on overty alleviation have emerged. One of them, the social enterprise, has attracted the attention of both academics and practitioners all over the world. Even if defined in different ways depending on the context, social enterprise has an enormous potential to generate social benefits and to promote local agency and private initiative in poverty alleviation. In this sense, it is fitting to highlight the importance of identifying the main standards that permit the characterization of diverse social enterprises, in order to understand their main specificities and guarantee value generation for low-income populations. Another crucial factor is understanding innovation as a critical factor in promoting social enterprises. A powerful tool to enhance the impact and application of this model is Information and Communication Technologies. In the 21st century,these tools allow users to find new ways of collaboration, new sustainable business models and a cost-effective way of scaling-up initiatives. This paper, a product of the collaborative research between the Universidad Politécnica de Madrid and the Universidade Federal Fluminense, examines different business models for social enterprises and the role that ICT can play in scale and impact of these initiatives

Neuroanatomic-based detection algorithm for automatic labeling of brain structures in brain injury

The number and grade of injured neuroanatomic structures and the type of injury determine the degree of impairment after a brain injury event and the recovery options of the patient. However, the body of knowledge and clinical intervention guides are basically focused on functional disorder and they still do not take into account the location of injuries. The prognostic value of location information is not known in detail either. This paper proposes a feature-based detection algorithm, named Neuroanatomic-Based Detection Algorithm (NBDA), based on SURF (Speeded Up Robust Feature) to label anatomical brain structures on cortical and sub-cortical areas. Themain goal is to register injured neuroanatomic structures to generate a database containing patient?s structural impairment profile. This kind of information permits to establish a relation with functional disorders and the prognostic evolution during neurorehabilitation procedures.

Far infrared photoconductivity in a silicon based material: vanadium supersaturated silicon

We have analyzed the spectral sub-bandgap photoresponse of silicon (Si) samples implanted with vanadium (V) at different doses and subsequently processed by pulsed-laser melting. Samples with V concentration clearly above the insulator-metal transition limit show an important increase of the photoresponse with respect to a Si reference sample. Their photoresponse extends into the far infrared region and presents a sharp photoconductivity edge that moves towards lower photon energies as the temperature decreases. The increase of the value of the photoresponse is contrary to the classic understanding of recombination centers action and supports the predictions of the insulator-metal transition theory.

Bidirectional multiple port dc/dc transformer based on a series resonant converter

In this paper a novel bidirectional multiple port dc/dc transformer topology is presented. The novel concept for dc/dc transformer is based on the Series Resonant Converter (SRC)topology operated at its resonant frequency point. This allows for higher switching frequency to be adopted and enables high efficiency/high power density operation. The feasibility of the proposed concept is verified on a 300W, 700 kHz three port prototype with 390V input voltage and 48V and 12V output voltages. A peak overall efficiency of 93% is measured at full load. A very good load and cross regulation characteristic of the converter is observed in the whole load range, from full load to open circuit. The sensitivity analysis of the resonant capacitance is also performed showing very slight deterioration in the converter performances when a resonant capacitor is changed ±30% of its nominal value.

Accuracy estimates based on multifield variational principles

Recent developments to fit the so called Free Formulation into a variational framework have suggested the possibility of introducing a new category of error estimates for finite element computations. Such error estimates are based on differences between certain multifield functionals, which give the same value for the true solution. In the present paper the formulation of some estimates of this kind is introduced for elasticity and plate bending problems, and several examples of their performance are discussed. The observed numerical behavior of the new accuracy measures seems to be acceptable from an engineering point of view. However, further numerical experimentation is still needed to establish practical tolerance levels for real problems.

Discontinuous solutions and boundary value problems for non-linearly elastic fibre-reinforced materials

En este trabajo se han analizado varios problemas en el contexto de la elasticidad no lineal basándose en modelos constitutivos representativos. En particular, se han analizado problemas relacionados con el fenómeno de perdida de estabilidad asociada con condiciones de contorno en el caso de material reforzados con fibras. Cada problema se ha formulado y se ha analizado por separado en diferentes capítulos. En primer lugar se ha mostrado el análisis del gradiente de deformación discontinuo para un material transversalmente isótropo, en particular, el modelo del material considerado consiste de una base neo-Hookeana isótropa incrustada con fibras de refuerzo direccional caracterizadas con un solo parámetro. La solución de este problema se vincula con instabilidades que dan lugar al mecanismo de fallo conocido como banda de cortante. La perdida de elipticidad de las ecuaciones diferenciales de equilibrio es una condición necesaria para que aparezca este tipo de soluciones y por tanto las inestabilidades asociadas. En segundo lugar se ha analizado una deformación combinada de extensión, inación y torsión de un tubo cilíndrico grueso donde se ha encontrado que la deformación citada anteriormente puede ser controlada solo para determinadas direcciones de las fibras refuerzo. Para entender el comportamiento elástico del tubo considerado se ha ilustrado numéricamente los resultados obtenidos para las direcciones admisibles de las fibras de refuerzo bajo la deformación considerada. En tercer lugar se ha estudiado el caso de un tubo cilíndrico grueso reforzado con dos familias de fibras sometido a cortante en la dirección azimutal para un modelo de refuerzo especial. En este problema se ha encontrado que las inestabilidades que aparecen en el material considerado están asociadas con lo que se llama soluciones múltiples de la ecuación diferencial de equilibrio. Se ha encontrado que el fenómeno de instabilidad ocurre en un estado de deformación previo al estado de deformación donde se pierde la elipticidad de la ecuación diferencial de equilibrio. También se ha demostrado que la condición de perdida de elipticidad y ^W=2 = 0 (la segunda derivada de la función de energía con respecto a la deformación) son dos condiciones necesarias para la existencia de soluciones múltiples. Finalmente, se ha analizado detalladamente en el contexto de elipticidad un problema de un tubo cilíndrico grueso sometido a una deformación combinada en las direcciones helicoidal, axial y radial para distintas geotermias de las fibras de refuerzo . In the present work four main problems have been addressed within the framework of non-linear elasticity based on representative constitutive models. Namely, problems related to the loss of stability phenomena associated with boundary value problems for fibre-reinforced materials. Each of the considered problems is formulated and analysed separately in different chapters. We first start with the analysis of discontinuous deformation gradients for a transversely isotropic material under plane deformation. In particular, the material model is an augmented neo-Hookean base with a simple unidirectional reinforcement characterised by a single parameter. The solution of this problem is related to material instabilities and it is associated with a shear band-type failure mode. The loss of ellipticity of the governing differential equations is a necessary condition for the existence of these material instabilities. The second problem involves a detailed analysis of the combined non-linear extension, inflation and torsion of a thick-walled circular cylindrical tube where it has been found that the aforementioned deformation is controllable only for certain preferred directions of transverse isotropy. Numerical results have been illustrated to understand the elastic behaviour of the tube for the admissible preferred directions under the considered deformation. The third problem deals with the analysis of a doubly fibre-reinforced thickwalled circular cylindrical tube undergoing pure azimuthal shear for a special class of the reinforcing model where multiple non-smooth solutions emerge. The associated instability phenomena are found to occur prior to the point where the nominal stress tensor changes monotonicity in a particular direction. It has been also shown that the loss of ellipticity condition that arises from the equilibrium equation and ^W=2 = 0 (the second derivative of the strain-energy function with respect to the deformation) are equivalent necessary conditions for the emergence of multiple solutions for the considered material. Finally, a detailed analysis in the basis of the loss of ellipticity of the governing differential equations for a combined helical, axial and radial elastic deformations of a fibre-reinforced circular cylindrical tube is carried out.

Discrete element analysis for the assessment of the accuracy of load cell-based dynamic weighing systems in grape harvesters under different ground conditions

Dynamic weighing systems based on load cells are commonly used to estimate crop yields in the field. There is lack of data, however, regarding the accuracy of such weighing systems mounted on harvesting machinery, especially on that used to collect high value crops such as fruits and vegetables. Certainly, dynamic weighing systems mounted on the bins of grape harvesters are affected by the displacement of the load inside the bin when moving over terrain of changing topography. In this work, the load that would be registered in a grape harvester bin by a dynamic weighing system based on the use of a load cell was inferred by using the discrete element method (DEM). DEM is a numerical technique capable of accurately describing the behaviour of granular materials under dynamic situations and it has been proven to provide successful predictions in many different scenarios. In this work, different DEM models of a grape harvester bin were developed contemplating different influencing factors. Results obtained from these models were used to infer the output given by the load cell of a real bin. The mass detected by the load cell when the bin was inclined depended strongly on the distribution of the load within the bin, but was underestimated in all scenarios. The distribution of the load was found to be dependent on the inclination of the bin caused by the topography of the terrain, but also by the history of inclination (inclination rate, presence of static periods, etc.) since the effect of the inertia of the particles (i.e., representing the grapes) was not negligible. Some recommendations are given to try to improve the accuracy of crop load measurement in the field.

Towards a unified sentiment lexicon based on graphics processing units

This paper presents an approach to create what we have called a Unified Sentiment Lexicon (USL). This approach aims at aligning, unifying, and expanding the set of sentiment lexicons which are available on the web in order to increase their robustness of coverage. One problem related to the task of the automatic unification of different scores of sentiment lexicons is that there are multiple lexical entries for which the classification of positive, negative, or neutral {P, Z, N} depends on the unit of measurement used in the annotation methodology of the source sentiment lexicon. Our USL approach computes the unified strength of polarity of each lexical entry based on the Pearson correlation coefficient which measures how correlated lexical entries are with a value between 1 and -1, where 1 indicates that the lexical entries are perfectly correlated, 0 indicates no correlation, and -1 means they are perfectly inversely correlated and so is the UnifiedMetrics procedure for CPU and GPU, respectively. Another problem is the high processing time required for computing all the lexical entries in the unification task. Thus, the USL approach computes a subset of lexical entries in each of the 1344 GPU cores and uses parallel processing in order to unify 155802 lexical entries. The results of the analysis conducted using the USL approach show that the USL has 95.430 lexical entries, out of which there are 35.201 considered to be positive, 22.029 negative, and 38.200 neutral. Finally, the runtime was 10 minutes for 95.430 lexical entries; this allows a reduction of the time computing for the UnifiedMetrics by 3 times.

Analysis of signal impairment and crosstalk penalty induced by different types of optical filters in 100 Gbps PM-DQPSK based systems

Optical filters are crucial elements in optical communication networks. Their influence toward the optical signal will affect the communication quality seriously. In this paper we will study and simulate the optical signal impairment and crosstalk penalty caused by different kinds of filters, which include Butterworth, Bessel, Fiber Bragg Grating (FBG) and Fabry-Perot (F-P). Signal impairment from filter concatenation effect and crosstalk penalty from out-band and in-band are analyzed from Q-penalty, eye opening penalty (EOP) and optical spectrum. The simulation results show that signal impairment and crosstalk penalty induced by the Butterworth filter is the minimum among these four types of filters. Signal impairment caused by filter concatenation effect shows that when center frequency of all filters is aligned perfectly with the laser's frequency, 12 50-GHz Butterworth filters can be cascaded, with 1-dB EOP. This value is reduced to 9 when the center frequency is misaligned with 5 GHz. In the 50-GHz channel spacing DWDM networks, total Q-penalty induced by a pair of Butterworth filters based demultiplexer and multiplexer is lower than 0.5 dB when the filter bandwidth is in the range of 42-46 GHz.

Resource allocation in GMD and SVD-based MIMO System

Singular-value decomposition (SVD)-based multiple-input multiple output (MIMO) systems, where the whole MIMO channel is decomposed into a number of unequally weighted single-input single-output (SISO) channels, have attracted a lot of attention in the wireless community. The unequal weighting of the SISO channels has led to intensive research on bit- and power allocation even in MIMO channel situation with poor scattering conditions identified as the antennas correlation effect. In this situation, the unequal weighting of the SISO channels becomes even much stronger. In comparison to the SVD-assisted MIMO transmission, geometric mean decomposition (GMD)-based MIMO systems are able to compensate the drawback of weighted SISO channels when using SVD, where the decomposition result is nearly independent of the antennas correlation effect. The remaining interferences after the GMD-based signal processing can be easily removed by using dirty paper precoding as demonstrated in this work. Our results show that GMD-based MIMO transmission has the potential to significantly simplify the bit and power loading processes and outperforms the SVD-based MIMO transmission as long as the same QAM-constellation size is used on all equally-weighted SISO channels.

Posibilidades de cultivo de nuevas especies marinas en el área mediterránea

La acuicultura, el cultivo y cría de animales y plantas acuáticas, representa en la actualidad una fuente esencial de proteína animal y vegetal altamente saludable y nutritiva, proporcionando un sistema de vida y de ingresos en todo el mundo. La acuicultura además de ser un motor para el desarrollo social y económico de las áreas costeras marinas y fluviales mundiales, supone en muchas regiones subdesarrolladas una garantía de alimento de alta calidad y es clave en la seguridad alimentaria de sus poblaciones. El desarrollo de la acuicultura se ha realizado fundamentalmente en los últimos 50 años, y ha sido sobre todo en la década de los años 80, cuando la acuicultura ha experimentado un fuerte crecimiento con tasas anuales que superan el 6%. Con el estancamiento de la producción pesquera y el incremento de la población mundial, la acuicultura se presenta como la única fuente posible de suministro de proteínas (vegetales y animales) de alta calidad, ricas en aceites omega 3 (EPA y DHA) de origen acuático. En la actualidad la producción procedente de la acuicultura supera los 95 millones de toneladas anuales, siendo ligeramente superior a los 94 millones de toneladas anuales provenientes de la pesca extractiva. De este total mundial acuícola, la producción asiática representa el 89%, mientras que la europea el 4,2% Aunque el 46% de la producción mundial acuícola se concentra únicamente en solo 10 especies, una de las principales características de la acuicultura es la gran diversidad de especies cultivadas, más de 500, realizándose su cría bajo diferentes tecnologías y sistemas productivos. El ámbito de esta tesis, es únicamente la acuicultura marina que se desarrolla en las aguas del mar mediterráneo, indistintamente de los sistemas y tecnología de producción utilizados. Los principales grupos de cultivo que se realizan en las aguas del Mediterráneo son los moluscos y los peces, siendo muy escasos los cultivos de otros grupos como crustáceos y macroalgas. La piscicultura marina mediterránea está dominada por el cultivo en jaulas flotantes de dos especies, la dorada (Sparus auratus) y la lubina (Dicentrarchus labrax). Estas dos especies y tras 30 años de experiencia de cultivo, mantienen todavía una ineficiencia productiva alta (reducida selección genética, lento crecimiento hasta talla comercial, alto factor de conversón del pienso…) y además ocupan un estrecho nicho de mercado, ya que prácticamente toda la comercialización de la dorada y lubina se realiza en fresco y sin elaborar ni transformar, a una talla media de 500 g. Para dar respuesta desde la acuicultura mediterránea al alto consumo y a la creciente demanda que en la Unión Europea existe de los productos acuícolas, y en especial los productos elaborados y transformados, es necesario de manera urgente, un aumento de la producción de las especies ya cultivadas (dorada y lubina) mediante la mejora de su eficiencia productiva, al mismo tiempo que se debe iniciar la producción industrial de nuevas especies piscícolas, mediante la diversificación de los cultivos. Para llevar a cabo esta diversificación, se hace necesario el establecimiento de una metodología clara, que asegure una selección de especies apropiadas y rentables para la industria acuícola mediterránea, cuyo cultivo sostenible debiera cumplir con los desafíos que el sector tiene. Nuevas especies que complementen y cubran las demandas actuales y futuras del mercado Europeo e Internacional de productos acuícolas. Nuevas especies con parámetros productivos eficientes, que garanticen unos costes productivos competitivos. Nuevas especies que puedan ser cultivadas utilizando como base la tecnología de producción ya existente en el sector. El objetivo de esta tesis es la definición y desarrollo de una metodología sencilla para la selección de nuevas especies piscícolas marinas para su cultivo eficiente y sostenible Y bajo la aplicación de esta metodología, la selección de un grupo de especies piscícolas para su cultivo rentable a corto y medio plazo (6-8 años) en el Mediterráneo. Para ello se ha definido y aplicado una metodología con la que se han evaluado diez especies candidatas, previamente escogidas de una serie de listas previas originadas en los distintos estudios y trabajos de diversificación realizados con anterioridad por otros equipos de investigación. Estas especies candidatas han sido: Seriola dumerili. (Seriola) , Argyrosomus regius (Corvina), Polyprion americanus (Cherna), Ephinephelus marginatus (Mero), Dentex dentex (Dentón), Pagrus pagrus (Pargo), Solea senegalensis (Lenguado del Senegal), Thunnus thynnus (Atún rojo), Mugil cephalus (Lisa), Coryphaena hippurus (Lampuga). El conjunto de estas especies ocupa un amplio y variado espectro dentro de las distintas áreas de mercado, productiva, tecnológica, y medioambiental . Y en todas ellas existe una experiencia mínima en sus diferentes fases de cultivo. En el desarrollo de la metodología de selección, en esta tesis se han definido diversos parámetros de evaluación, considerados como los más significativos y sencillos de aplicar. Los parámetros se han agrupado en tres bloques, el comercial, el productivo y el medioambiental. El Bloque de Mercado, comprende aquellos criterios que están relacionados con la comercialización de la especie. Calidad de la carne del pescado. Competencia con otras especies en el mercado. Potencial de Transformado. Precio de venta del pescado. El bloque Medioambiental incluye criterios del grado de idoneidad de la especie en la región y del grado de impacto ambiental de su cultivo. Rango de temperaturas del agua óptimo para el cultivo. Potencial impacto ambiental de su cultivo. Eslabón trófico de la especie.. El bloque Productivo, engloba los criterios y parámetros relacionados con el nivel de conocimiento y control que sobre su cultivo existen ( larvario, engorde, tecnología) Grado de control de la fase larvaria. Disponibilidad de alevines en el sector Crecimiento. Factor de conversión Aprovechamiento de la capacidad productiva instalada, Coste de inversión. Previa a la evaluación se han descrito las principales características de las especies candidatas en función del estado y experiencia actual sus cultivos. En la aplicación de estos criterios se han establecido matrices de evaluación y a cada criterio se le ha asignado un valor diferente en función de sus características y propiedades selectivas. Los resultados obtenidos mediante la aplicación de la metodología de evaluación propuesta, han señalado la seriola y la corvina como especies más recomendadas para su puesta en cultivo en el Mediterráneo a corto y medio plazo. Las otras dos especies seleccionadas han sido la lisa y la lampuga. Como conclusión final podemos señalar que el cultivo de nuevas especies es fundamentalmente para el desarrollo sostenible de la acuicultura mediterránea. Esta diversificación debe basarse en la aplicación de una metodología sencilla y práctica, que garantice una selección de especies cuyo cultivo sea rentable y abarquen nuevos segmentos de mercado. ABSTRACT Aquaculture, the cultivation and breeding of aquatic animals and plants, currently represents an essential source of highly nutritious and healthy protein that provides a way of life and income all over the world. Apart from being a social and economic driver in coastal and marine areas, it also entails a guaranteed high quality nourishment in many undeveloped areas being key to the alimentary safety of their population. Aquaculture has developed mainly in the last 50 years and experienced a high growth especially during the Eighties when the annual rates were above 6%. With fishing production stagnating and the global population increasing, aquaculture emerges as the only possible animal and vegetable protein source of aquatic origin, high in quality and omega 3 oils (EPA and DHA). Here and now, aquaculture production is over 95 million tons per year, which is slightly higher than the 94 million tons per year that come from extractive fisheries. From this aquaculture total, Asiatic production represents 89% while Europe´s is only 4.2%. Even though 46% of the global aquaculture production focuses just on 10 species, one of the main characteristics of aquaculture is the wide diversity of cultivated species –over 500– using different technologies and production systems. This PhD’s scope is only marine aquaculture in Mediterranean water, regardless of the technology or systems used. The main crop groups in the Mediterranean sea are molluscs and finfish, while crustacean and macroalgae cultivations are very limited. Mediterranean fish culture is dominated by the cultivation in floating cages of two species: Bream (Sparus auratus) and Bass (Dicentrarchus labrax). After 30 years of farming, these two species still keep a high productive inefficiency –reduced genetic selection, slow growth to marketable size, high feed conversion rate– and fill a narrow niche market as practically all bream and bass is sold fresh and whole, unprocessed and untransformed, with an average size of 500 grams. To meet the high consumption and growing demand of aquaculture products, in the European Union (especially those prepared and transformed), Mediterranean aquaculture needs to urgently increase the production of the species already under cultivation (Bass and Bream) by means of improving its productive efficiency and at the same time begin initiating industrial production of new species by diversifying the cultivation. To carry out this diversification it is necessary to establish a clear methodology that ensures the selection of adapted and profitable species for the Mediterranean aquaculture industry. The sustainable farming of these new species needs to meet the challenges this sector faces: New species that complement and meet the current and future needs of the European and International markets for aquaculture products. New species with efficient production parameters that ensure competitive production costs. New species that can be cultivated using already existing production technologies. The aim of this PhD is to define and develop a simple methodology for the selection of new marine fish species for their efficient and sustainable cultivation. And by applying this methodology, to select a group of fish species for its profitable crop in the short and medium term (6-8 years) in the Mediterranean. For this, a methodology has been defined and applied evaluating ten candidate species selected from a series of lists originated from different studies and from diversification works previously conducted by other research teams. These candidate species are: Seriola dumerili. (Greater amberjack), Argyrosomus regius (Meagre), Polyprion americanus (Wreckfish), Ephinephelus marginatus (Dusky grouper), Dentex dentex (Common dentex), Pagrus pagrus (Red porgy), Solea senegalensis (Senegal sole), Thunnus thynnus (Bluefin tuna), Mugil cephalus (Grey mullet), Coryphaena hippurus (Dolphinfish). All these species occupy a broad and varied spectrum within different productive, technological and environmental market areas. There is minimal experience in their different stages of cultivation for all of them. While developing the selection methodology several evaluation parameters have been defined in this PhD, considered the most significant and simple to apply. The parameters are grouped in three blocks: commercial, productivity and environmental. Market block comprises criteria related to the marketing of the species. Quality of the fish meatCompetition with other species in the marketTransformation potentialFish selling price Environment block includes criteria related to the degree of suitability of the species in the region and the degree of environmental impact of their cultivation. Optimal water temperature range for cultivationPotential environmental impact of their cultivationTrophic chain level. Productivity block includes criteria and parameters related to the level of knowledge and control over their cultivation (larval, ongrowing, technology) Degree of control of the larval stageAvailability of alevin in the sector GrowthFeed conversion rate. Exploitation of installed capacityInvestment cost Prior to the evaluation, the main characteristics of the candidate species have been described based on the current status and experience of their cultivations. When applying these criteria evaluation matrices have been established assigning to each criteria a different value depending on their characteristics and selective properties. The results obtained by applying the proposed assessment methodology have identified the Greater Amberjack and Meagre as the most recommended species for farming in the Mediterranean in the short and medium term. The other two selected species were the Grey Mullet and the Dolphinfish. In conclusion, the cultivation of new species is crucial for the sustainable development of Mediterranean aquaculture. This diversification has to be based on the application of a simple and practical methodology that guarantees a selection of species whose cultivation is profitable and covers new market segments.