Biogenic opal, biogenic barium, calcium carbonate and U/Th isotope data from core-top sediments of SONNE cruise SO202 (INOPEX)

Sedimentary proxies used to reconstruct marine productivity suffer from variable preservation and are sensitive to factors other than productivity. Therefore, proxy calibration is warranted. Here we map the spatial patterns of two paleoproductivity proxies, biogenic opal and barium fluxes, from a set of core-top sediments recovered in the Subarctic North Pacific. Comparisons of the proxy data with independent estimates of primary and export production, surface water macronutrient concentrations and biological pCO2 drawdown indicate that neither proxy shows a significant correlation with primary or export productivity for the entire region. Biogenic opal fluxes, when corrected for preservation using 230Th-normalized accumulation rates, show a good correlation with primary productivity along the volcanic arcs (tau = 0.71, p = 0.0024) and with export productivity throughout the western Subarctic North Pacific (tau = 0.71, p = 0.0107). Moderate and good correlations of biogenic barium flux with export production (tau = 0.57, p = 0.0022) and with surface water silicate concentrations (tau = 0.70, p = 0.0002) are observed for the central and eastern Subarctic North Pacific. For reasons unknown, however, no correlation is found in the western Subarctic North Pacific between biogenic barium flux and the reference data. Nonetheless, we show that barite saturation, uncertainty in the lithogenic barium corrections and problems with the reference datasets are not responsible for the lack of a significant correlation between biogenic barium flux and the reference data. Further studies evaluating the factors controlling the variability of the biogenic constituents in the sediments are desirable in this region.

XDX, Mg/Ca, and delta18O analyses of core top sediments

Mg/Ca and d18O data for four species of planktic foraminifera (G. ruber (white), G. sacculifer (without sac), N. dutertrei, and P. obliquiloculata) from core top sediments from the tropical Pacific, Atlantic, and western Indian Ocean. Deepwater calcite saturation values (Delta[CO3**2-]) at the sites range from 55 to -23 µmol/kg.

An overview of top-down vs. bottom-up models for informal settlement upgrading in South Africa

The paper explores informal settlement upgrading approaches in South Africa and presents a review of top-down vs. bottom-up models, using experience and lessons learned from the Durban metropolitan area. Reflections on past upgrading efforts suggest that top-down policies in South Africa have not been successful to date. By contrast, participatory techniques, such as planning activism, can be used to enhance community empowerment and a sense of local ownership. This paper reveals that although the notion of ‘bottom-up’, participatory methods for community improvement is often discussed in international development discourses, the tools, processes and new knowledge needed to ensure a successful upgrade are under-utilised. Participation and collaboration can mean various things for informal housing upgrading and often the involvement of local communities is limited to providing feedback in already agreed development decisions from local authorities and construction companies. The paper concludes by suggesting directions for ‘co-producing’ knowledge with communities through participatory, action-research methods and integrating these insights into upgrading mechanisms and policies for housing and infrastructure provision. The cumulative impacts emerging from these approaches could aggregate into local, regional, and national environmental, social and economic benefits able to successfully transform urban areas and ensure self-reliance for local populations.

Enabling Leg-Based Guidance on Top of Waypoint-Based Autopilots for UAS

This paper presents a methodology to extend the guidance functionalities of Commercial Off-The-Shelf autopilots currently available for Unmanned Aircraft Systems (UAS). Providing that most autopilots only support elemental waypoint-based guidance, this technique allows the aircraft to follow leg-based flight plans without needing to modify the internal control algorithms of the autopilot. It is discussed how to provide Direct to Fix, Track to Fix and Hold to Fix path terminators (along with Fly-Over and Fly-By waypoints) to basic autopilots able to natively execute only a limited set of legs. Preliminary results show the feasibility of the proposal with flight simulations that used a flexible and reconfigurable UAS architecture specifically designed to avoid dependencies with a single or particular autopilot solution.

How to achieve gender diversity in top management : A qualitative study of gender equal companies listed on the Swedish stock exchange

Alarming statistics provides that only 10,2 percentage of companies listed on the Swedish stock exchange has achieved gender equality in their top management. The fact is that women being discriminated, since men dominates these positions of power. The study is of a qualitative nature and aims to achieve a deeper understanding and knowledge contribution of how gender equal companies´ has achieved this gender diversity in their top management. Sweden's highest ranking business leaders has been interviewed in order to obtain their view, and the companies they represent, in order to get an answer to what the most important requirements has been in the achievement. The study's main result has shown that strong core values and corporate culture are basic and required condition for a successful gender equality strategy. A deliberate or emergent strategy can then be successfully implemented, and it is mainly the impact of structural barriers that determine which strategy a company uses. At a deliberate strategy, following measures are in additional to core values and corporate cultural crucial; commitment towards gender equality, a specific plan with clear objectives, and a conscious objective recruitment process. The result found aboute these two factors and three measures also identified a required specific order to follow in order to achieve gender diversity in top management. These findings, which in a near future, aims to contribute to a more gender equal Sweden.

Search for Pair-Produced Supersymmetric Top Quark Partners with the ATLAS Experiment

Searches for the supersymmetric partner of the top quark (stop) are motivated by natural supersymmetry, where the stop has to be light to cancel the large radiative corrections to the Higgs boson mass. This thesis presents three different searches for the stop at √s = 8 TeV and √s = 13 TeV using data from the ATLAS experiment at CERN’s Large Hadron Collider. The thesis also includes a study of the primary vertex reconstruction performance in data and simulation at √s = 7 TeV using tt and Z events. All stop searches presented are carried out in final states with a single lepton, four or more jets and large missing transverse energy. A search for direct stop pair production is conducted with 20.3 fb−1 of data at a center-of-mass energy of √s = 8 TeV. Several stop decay scenarios are considered, including those to a top quark and the lightest neutralino and to a bottom quark and the lightest chargino. The sensitivity of the analysis is also studied in the context of various phenomenological MSSM models in which more complex decay scenarios can be present. Two different analyses are carried out at √s = 13 TeV. The first one is a search for both gluino-mediated and direct stop pair production with 3.2 fb−1 of data while the second one is a search for direct stop pair production with 13.2 fb−1 of data in the decay scenario to a bottom quark and the lightest chargino. The results of the analyses show no significant excess over the Standard Model predictions in the observed data. Consequently, exclusion limits are set at 95% CL on the masses of the stop and the lightest neutralino.

An Examination of Customers’ Attitudes about Table Top Technology in Full-Service Restaurants

This paper examines the influence of customer-facing technology in full-service restaurants. As a new addition to the service experience, tabletop devices offer the customer more control over the dining experience, and also increase customer participation in the service process, which has the potential to upset the traditional exchange between service providers and customers in restaurants. To examine how customers react to the use of tabletop devices, this study examines 1,343 point-of-sales transactions from 20 units of a full-service casual dining restaurant chain and matches customer in-restaurant transactions to their reactions to tabletop devices used during their meals. Results show that over 70% of the customers who used tabletop devices reported positive affect toward the device, with approximately 79% of customers reporting that the device improved their experience, citing convenience, ease of use, and credit card security as some benefits of using the technology. Approximately 80% of the customers who used the device reported that they would return to the restaurant because of the positive affect. The results also indicate that likeability of the device and tip percentage were positively and significantly connected to customer reports of the devices having a positive effect on experience and on desire to return. In addition, when customers reported increased return intentions, likeability of the device was higher regardless of reports of the device improving restaurant experience, showing that the introduction of tabletop devices had a positive effect for most—but not all—customers.

The Influence of Table Top Technology in Full-service Restaurants

The use of tabletop technology continues to grow in the restaurant industry, and this study identifies the strengths and weakness of the technology, how it influences customers, and how it can improve the bottom line for managers and business owners. Results from two studies involving a full-service casual dining chain show that dining time was significantly reduced among patrons who used the tabletop hardware to order or pay for their meals, as was the time required for servers to meet the needs of customers. Also, those who used the devices to order a meal tended to spend more than those who did not. Patrons across the industry have embraced guest-facing technology, such as online reservation systems, mobile apps, payment apps, and tablet-based systems, and may in fact look for such technology when deciding where to dine. Guests’ reactions have been overwhelmingly positive, with 70 to 80 percent of consumers citing the benefits of guest-facing technology and applications. The introduction of tabletop technology in the full-service segment has been slower than in quick-service restaurants (QSRs), and guests cite online reservation systems, online ordering, and tableside payment as preferred technologies. Restaurant operators have also cited benefits of guest-facing technology, for example, the use of electronic ordering, which led to increased sales as such systems can induce the purchase of more expensive menu items and side dishes while allowing managers to store order and payment information for future transactions. Researchers have also noted the cost of the technology and potential problems with integration into other systems as two main factors blocking adoption.

Aplicación y comparación de la metodología de diseño Top Down y Bottom Up

Este proyecto estudia y compara las metodologías Bottom Up y Top Down, utilizadas en el desarrollo de productos dentro de un departamento de manufactura en un ambiente colaborativo -- Se desarrolló un producto mediante ambas metodologías, posteriormente se analizó su incidencia en el comportamiento de indicadores de gestión, que miden el desempeño de una organización -- Se destacan también los beneficios del Top Down en la manufactura de grandes ensambles, tomando como ejemplo un torno

BET on Top Hat: challenges to improve language proficiency

Within the business context, communication and interaction tends to be considerably rooted in the use of English (as lingua franca), as well as in ICT use. Thus, professionals have to be able to speak the English language, resorting to specific, internationally recognised terminology and be proficient in the use of manifold ICT tools. In fact, the tendency is for the great majority of higher education (HE) students to own mobile devices (laptops, smartphones and/or tablets) and use them to access information and communicate/interact with content and other people. Bearing this in mind, a teaching and learning strategy was designed, in which m-learning (i.e. learning in which the delivery platform is a mobile device) was used to approach Business English Terminology (BET). The strategy was labelled as ‘BET on Top Hat’, once the selected application was Top Hat (https://tophat.com/) and the idea was for students to face it as if it were a game/challenge. In this scenario, the main goals of this exploratory study were to find evidence as to: i) the utility of m-learning activities for learning BET and ii) if and how m-learning activities can generate intrinsic motivation in students to learn BET. Participants (n=23) were enrolled in English II, a curricular unit of the 1st cycle degree in Retail Management offered at Águeda School of Technology and Management – University of Aveiro (2014/15 edition). The data gathered included the students’ results in quizzes and their answers to a short final evaluation questionnaire regarding their experience with BET on Top Hat. Consequently, data were treated and analysed resorting to descriptive statistical analysis, and, when considered pertinent, the teacher’s observation notes were also considered. The results unveil that, on the one hand, the strategy had a clear positive impact on the students’ intrinsic motivation and, on the other hand, the students’ performance as to BET use tended to improve over time.

Top-K Query Processing in Edge-Labeled Graph Data

Edge-labeled graphs have proliferated rapidly over the last decade due to the increased popularity of social networks and the Semantic Web. In social networks, relationships between people are represented by edges and each edge is labeled with a semantic annotation. Hence, a huge single graph can express many different relationships between entities. The Semantic Web represents each single fragment of knowledge as a triple (subject, predicate, object), which is conceptually identical to an edge from subject to object labeled with predicates. A set of triples constitutes an edge-labeled graph on which knowledge inference is performed. Subgraph matching has been extensively used as a query language for patterns in the context of edge-labeled graphs. For example, in social networks, users can specify a subgraph matching query to find all people that have certain neighborhood relationships. Heavily used fragments of the SPARQL query language for the Semantic Web and graph queries of other graph DBMS can also be viewed as subgraph matching over large graphs. Though subgraph matching has been extensively studied as a query paradigm in the Semantic Web and in social networks, a user can get a large number of answers in response to a query. These answers can be shown to the user in accordance with an importance ranking. In this thesis proposal, we present four different scoring models along with scalable algorithms to find the top-k answers via a suite of intelligent pruning techniques. The suggested models consist of a practically important subset of the SPARQL query language augmented with some additional useful features. The first model called Substitution Importance Query (SIQ) identifies the top-k answers whose scores are calculated from matched vertices' properties in each answer in accordance with a user-specified notion of importance. The second model called Vertex Importance Query (VIQ) identifies important vertices in accordance with a user-defined scoring method that builds on top of various subgraphs articulated by the user. Approximate Importance Query (AIQ), our third model, allows partial and inexact matchings and returns top-k of them with a user-specified approximation terms and scoring functions. In the fourth model called Probabilistic Importance Query (PIQ), a query consists of several sub-blocks: one mandatory block that must be mapped and other blocks that can be opportunistically mapped. The probability is calculated from various aspects of answers such as the number of mapped blocks, vertices' properties in each block and so on and the most top-k probable answers are returned. An important distinguishing feature of our work is that we allow the user a huge amount of freedom in specifying: (i) what pattern and approximation he considers important, (ii) how to score answers - irrespective of whether they are vertices or substitution, and (iii) how to combine and aggregate scores generated by multiple patterns and/or multiple substitutions. Because so much power is given to the user, indexing is more challenging than in situations where additional restrictions are imposed on the queries the user can ask. The proposed algorithms for the first model can also be used for answering SPARQL queries with ORDER BY and LIMIT, and the method for the second model also works for SPARQL queries with GROUP BY, ORDER BY and LIMIT. We test our algorithms on multiple real-world graph databases, showing that our algorithms are far more efficient than popular triple stores.

CIL 6.1289 (bottom) + 6.1294 (top) – Metrical epitaph for Lucius Cornelius Scipio, son of Gnaeus, grandson of Gnaeus

Photograph and notes by A.E. Gordon

Higgs production in association with top quarks at the LHC

Since it has been found that the MadGraph Monte Carlo generator offers superior flavour-matching capability as compared to Alpgen, the suitability of MadGraph for the generation of ttb¯ ¯b events is explored, with a view to simulating this background in searches for the Standard Model Higgs production and decay process ttH, H ¯ → b ¯b. Comparisons are performed between the output of MadGraph and that of Alpgen, showing that satisfactory agreement in their predictions can be obtained with the appropriate generator settings. A search for the Standard Model Higgs boson, produced in association with the top quark and decaying into a b ¯b pair, using 20.3 fb−1 of 8 TeV collision data collected in 2012 by the ATLAS experiment at CERN’s Large Hadron Collider, is presented. The GlaNtp analysis framework, together with the RooFit package and associated software, are used to obtain an expected 95% confidence-level limit of 4.2 +4.1 −2.0 times the Standard Model expectation, and the corresponding observed limit is found to be 5.9; this is within experimental uncertainty of the published result of the analysis performed by the ATLAS collaboration. A search for a heavy charged Higgs boson of mass mH± in the range 200 ≤ mH± /GeV ≤ 600, where the Higgs mediates the five-flavour beyond-theStandard-Model physics process gb → tH± → ttb, with one top quark decaying leptonically and the other decaying hadronically, is presented, using the 20.3 fb−1 8 TeV ATLAS data set. Upper limits on the product of the production cross-section and the branching ratio of the H± boson are computed for six mass points, and these are found to be compatible within experimental uncertainty with those obtained by the corresponding published ATLAS analysis.

CIL 3.7227 (top) + 3.7223 (bottom, in part) – Dedications,

Photographs and notes by A.E. Gordon