The perceptual organization of sine-wave speech under competitive conditions

Speech comprises dynamic and heterogeneous acoustic elements, yet it is heard as a single perceptual stream even when accompanied by other sounds. The relative contributions of grouping “primitives” and of speech-specific grouping factors to the perceptual coherence of speech are unclear, and the acoustical correlates of the latter remain unspecified. The parametric manipulations possible with simplified speech signals, such as sine-wave analogues, make them attractive stimuli to explore these issues. Given that the factors governing perceptual organization are generally revealed only where competition operates, the second-formant competitor (F2C) paradigm was used, in which the listener must resist competition to optimize recognition [Remez et al., Psychol. Rev. 101, 129-156 (1994)]. Three-formant (F1+F2+F3) sine-wave analogues were derived from natural sentences and presented dichotically (one ear = F1+F2C+F3; opposite ear = F2). Different versions of F2C were derived from F2 using separate manipulations of its amplitude and frequency contours. F2Cs with time-varying frequency contours were highly effective competitors, regardless of their amplitude characteristics. In contrast, F2Cs with constant frequency contours were completely ineffective. Competitor efficacy was not due to energetic masking of F3 by F2C. These findings indicate that modulation of the frequency, but not the amplitude, contour is critical for across-formant grouping.

A methodology for evaluating and selecting processes for natural gas conditioning

The aim of this work was to develop a generic methodology for evaluating and selecting, at the conceptual design phase of a project, the best process technology for Natural Gas conditioning. A generic approach would be simple and require less time and would give a better understanding of why one process is to be preferred over another. This will lead to a better understanding of the problem. Such a methodology would be useful in evaluating existing, novel and hybrid technologies. However, to date no information is available in the published literature on such a generic approach to gas processing. It is believed that the generic methodology presented here is the first available for choosing the best or cheapest method of separation for natural gas dew-point control. Process cost data are derived from evaluations carried out by the vendors. These evaluations are then modelled using a steady-state simulation package. From the results of the modelling the cost data received are correlated and defined with respect to the design or sizing parameters. This allows comparisons between different process systems to be made in terms of the overall process. The generic methodology is based on the concept of a Comparative Separation Cost. This takes into account the efficiency of each process, the value of its products, and the associated costs. To illustrate the general applicability of the methodology, three different cases suggested by BP Exploration are evaluated. This work has shown that it is possible to identify the most competitive process operations at the conceptual design phase and illustrate why one process has an advantage over another. Furthermore, the same methodology has been used to identify and evaluate hybrid processes. It has been determined here that in some cases they offer substantial advantages over the separate process techniques.

A comparative study of 'joined-up' working in three regeneration programme case studies

This research concerns the development of coordination and co-governance within three different regeneration programmes within one Midlands city over the period from 1999 to 2002. The New Labour government, in office since 1997, had an agenda for ‘joining-up’ government, part of which has had considerable impact in the area of regeneration policy. Joining-up government encompasses a set of related activities which can include the coordination of policy-making and service delivery. In regeneration, it also includes a commitment to operate through co-governance. Central government and local and regional organisations have sought to put this idea into practice by using what may be referred to as network management processes. Many characteristics of new policies are designed to address the management of networks. Network management is not new in this area, it has developed at least since the early 1990s with the City Challenge and Single Regeneration Budget (SRB) programmes as a way of encouraging more inclusive and effective regeneration interventions. Network management theory suggests that better management can improve decision-making outcomes in complex networks. The theories and concepts are utilised in three case studies as a way of understanding how and why regeneration attempts demonstrate real advances in inter-organisational working at certain times whilst faltering at others. Current cases are compared to the historical case of the original SRB programme as a method of assessing change. The findings suggest that: The use of network management can be identified at all levels of governance. As previous literature has highlighted, central government is the most important actor regarding network structuring. However, it can be argued that network structuring and game management are both practised by central and local actors; Furthermore, all three of the theoretical perspectives within network management (Instrumental, Institutional and Interactive), have been identified within UK regeneration networks. All may have a role to play with no single perspective likely to succeed on its own. Therefore, all could make an important contribution to the understanding of how groups can be brought together to work jointly; The findings support Klijn’s (1997) assertion that the institutional perspective is dominant for understanding network management processes; Instrumentalism continues on all sides, as the acquisition of resources remains the major driver for partnership activity; The level of interaction appears to be low despite the intentions for interactive decision-making; Overall, network management remains partial. Little attention is paid to the issues of accountability or to the institutional structures which can prevent networks from implementing the policies designed by central government, and/or the regional tier.

Managerial cognitions in technological innovation processes:a study of interpretative processes

In this research, conceptualizations of the links between technological innovation and organizational change are explored and recommendations in the literature concerning such changes are reviewed and criticized. Such recommendations do not usually address the details of social interactions by which organizational changes take place. As a consequence, the issue of how these recommendations become relevant for the actors who would carry them out is not addressed. The complexity of organizational change processes highlights the role of actors' interpretations of organizational reality. Interpretations take place through the use of language in the interaction between actors. Theoretical contributions and recommendations concerning organizational changes should be seen therefore as discourses which contribute to these interpretations. They will influence the process of change only if they become relevant for organizational actors'. A method for analysing discourse in organizations is presented. It is used to identify the variety of discourses which are put forward in organizations, and to describe the structure of their distribution among actors. The structures of discourses in three companies suggest that knowledge about technological innovation processes becomes relevant to the extent that it contributes to political/discursive processes maintained by actors attempting to secure or change their role definitions. It follows that recommendations concerning planned organizational change should take into account these processes explicitly. It is therefore suggested that the analysis of discourse can be a valuable instrument for monitoring change processes. Suggestions for further research are made, concerning (i) the development of the method itself and its use in real situations (ii) the study of how discourse structures evolve over time and episodes of change.

Mechanics of longitudinal rolling of tube through three-grooved rolls

This investigation examined the process of the longitudinal rolling of tubes through a set of three driven grooved rolls. Tubes were rolled with or without internal support i.e. under mandrel rolling or sinking conditions. Knowledge was required of the way in which the roll separating force and rolling torque vary for different conditions of rolling. The objective of this work being to obtain a better understanding and optimization of the mechanics of the process. The design and instrumentation of a complete experimental three-roll mill for the rolling of lead tube as an analogue material for hot steel, with the measurement of the individual roll force and torque is described. A novel type of roll load cell was incorporated and its design and testing discussed. Employing three roll sizes of 170 mm, 255 mm and 340 mm shroud diameter, precise tube specimens of various tube diameter to thickness ratios were rolled under sinking and mandrel rolling conditions. To obtain an indication of the tube-roll contact areas some of the specimens were partially rolled. For comparative purposes the remaining tubes were completely rolled as a single pass. The roll forces, torques and tube parameters e.g. reduction of area, D/t ratio, were collated and compared for each of the three roll diameters considered. The influence of friction, particularly in the mandrel rolling process, was commented upon. Theoretical studies utilising the equilibrium and energy methods were applied to both the sinking and mandrel rolling processes. In general, the energy approach gave better comparison with experiment, especially for mandrel rolling. The influence of the tube deformation zones on the two processes was observed and on the subsequent modification of the tube-roll arc contact length. A rudimentary attempt was made in the theoretical sinking analysis to allow for the deformation zone prior to roll contact; some success was noted. A general survey of the available tube rolling literature, for both the sinking and mandrel processes has been carried out.

The influence of cutting tool geometry upon aspects of chip flow and tool wear:a theoretical, three dimensional examination of the cutting geometry and the shape of the twist drill

This work is undertaken in the attempt to understand the processes at work at the cutting edge of the twist drill. Extensive drill life testing performed by the University has reinforced a survey of previously published information. This work demonstrated that there are two specific aspects of drilling which have not previously been explained comprehensively. The first concerns the interrelating of process data between differing drilling situations, There is no method currently available which allows the cutting geometry of drilling to be defined numerically so that such comparisons, where made, are purely subjective. Section one examines this problem by taking as an example a 4.5mm drill suitable for use with aluminium. This drill is examined using a prototype solid modelling program to explore how the required numerical information may be generated. The second aspect is the analysis of drill stiffness. What aspects of drill stiffness provide the very great difference in performance between short flute length, medium flute length and long flute length drills? These differences exist between drills of identical point geometry and the practical superiority of short drills has been known to shop floor drilling operatives since drilling was first introduced. This problem has been dismissed repeatedly as over complicated but section two provides a first approximation and shows that at least for smaller drills of 4. 5mm the effects are highly significant. Once the cutting action of the twist drill is defined geometrically there is a huge body of machinability data that becomes applicable to the drilling process. Work remains to interpret the very high inclination angles of the drill cutting process in terms of cutting forces and tool wear but aspects of drill design may already be looked at in new ways with the prospect of a more analytical approach rather than the present mix of experience and trial and error. Other problems are specific to the twist drill, such as the behaviour of the chips in the flute. It is now possible to predict the initial direction of chip flow leaving the drill cutting edge. For the future the parameters of further chip behaviour may also be explored within this geometric model.

Self-attentional processes in anxiety:an experimental study

Self-attention research has demonstrated a relationship between dispositional self-focus, anxiety proneness and fear arousal. In addition, the effect of self-focus manipulations on approach-avoidance tasks involving a feared stimulus are strikingly similar to the effects obtained from manipulation of other cognitive factors such as perceived self-efficacy. A number of experiments were designed to explore the relationship between self-focused attention and ffilxiety. Data from the experiments demonstrate that self-attention influences a variety of cognitive variables which have been considered as central factors in anxiety. Concomitants of self-focus are increased awareness of physiological arousal and overestimation of such arousal, the identification of self-discrepancies, cognitive failures and performance deficits and the activation of physical threat concepts in memory. These factors are conceptualised as central in the negative evaluation of physiological arousal and coping resources in anxiety. Clinically anxious individuals typically have high scores in dispositional self-consciousness and body-consciousness. In patients suffering from generalised anxiety or panic disorders maladaptive self-focusing tendencies can be related to specific life stressors which render aspects of the self salient. An analysis of the ideational component of anxiety revealed three subcomponents; negative social ideation (worry about other people's reaction to the self), negative somatic ideation (worry about physical symptoms and health) and obsessional ideation (the experience of uncontrollable and repetitive thoughts) which were differentially associated with measures of dispositional self-focus. The frequency and content of an.xious w-orry is associated with specific self-focusing tendencies. It is proposed that the 'attentional style' of the individual is an important determinant of the nature and intensity of their affective response in a threatening situation. A self-attentional model of anxiety is proposed and the complex interaction between self-focus and other cognitive factors in anxiety such as appraisal of arousal and coping resources and perceived levels of self-efficacy is discussed. The model presents new directions for research and therapeutic intervention in anxiety.

Amplification of temporally modulated signal beams via two-wave mixing in Bi12SiO20

A theoretical analysis of two-wave mixing in a BSO crystal is developed in the undepleted-pump approximation for a modulated signal beam. It is shown that, for a modulation of high enough frequency, significant ac amplification is possible at three distinct values of pump-beam detuning. A signal beam that is amplitude modulated by a square wave is analyzed by means of the theory, and experimental results are presented in confirmation of the analysis. Finally, it is shown that in the presence of absorption the optimum detunings for dc and ac amplification are different.

Micromechanics of agglomerate damage processes

This thesis reports a detailed investigation of the micromechanics of agglomerate behaviour under free-fall impact, double (punch) impact and diametrical compression tests using the simulation software TRUBAL. The software is based on the discrete element method (DEM) which incorporates the Newtonian equations of motion and contact mechanics theory to model the interparticle interactions. Four agglomerates have been used: three dense (differing in interface energy and contact density) and one loose. Although the simulated agglomerates are relatively coarse-grained, the results obtained are in good agreement with laboratory test results reported in the literature. The computer simulation results show that, in all three types of test, the loose agglomerate cannot fracture as it is unable to store sufficient elastic energy. Instead, it becomes flattened for low loading-rates and shattered or crushed at higher loading-rates. In impact tests, the dense agglomerates experience only local damage at low impact velocities. Semi-brittle fracture and fragmentation are produced over a range of higher impact velocities and at very high impact velocities shattering occurs. The dense agglomerates fracture in two or three large fragments in the diametrical compression tests. Local damage at the agglomerate-platen interface always occurs prior to fracture and consists of local bond breakage (microcrack formation) and local dislocations (compaction). The fracture process is dynamic and much more complex than that suggested by continuum fracture mechanics theory. Cracks are always initiated from the contact zones and propagate towards the agglomerate centre. Fracture occurs a short time after the start of unloading when a fracture crack "selection" process takes place. The detailed investigation of the agglomerate damage processes includes an examination of the evolution of the fracture surface. Detailed comparisons of the behaviour of the same agglomerate in all three types of test are presented. The particle size distribution curves of the debris are also examined, for both free-fall and double impact tests.

The impact of visual-verbal relationships on native-nonnative english speakers' reading processes and comprehension

The aim of this study was to comparatively investigate the impact of visual-verbal relationships that exist in expository texts on the reading process and comprehension of readers from different language background: native speakers of English (LI) and speakers of English as a foreign language (EFL). The study focussed, in this respect, on the visual elements (VEs) mainly graphs and tables that accompanied the selected texts. Two major experiments were undertaken. The first, was for the reading process using the post-reading questionnaire technique. Participants were 163 adult readers representing three groups: 77 (LI), 56 (EFL postgraduates); and 30 (EFL undergraduates). The second experiment was for the reading comprehension using cloze procedure. Participants were 123 representing the same above gorups: 50, 33 and 40 respectively. It was hypothesised that the LI readers would make use of VEs in the reading process in ways different from both EFL groups and that use would enhance each group's comprehension in different aspects and to different levels. In the analysis of the data of both experiments two statistical measurements were used. The chi-square was used to measure the differences between frequencies and the t-test was used to measure the differences between means. The results indicated a significant relationship between readers' language background and the impact of visual-verbal relationships on their reading processes and comprehension of such type of texts. The results also revealed considerable similarities between the two EFL groups in the reading process of texts accompanied by VEs. In the reading comprehension, however, the EFL undergraduates seemed to benefit from the visual-verbal relationships in their comprehension more than the postgraduates, suggesting a weak relationship of this impact for older EFL readers. Furthermore, the results showed considerable similarities between the reading process of texts accompanied by VEs and of whole prose texts. Finally an evaluation of this study was undertaken as well as practical implications for EFL readers and suggestions for future research.

Flow processes in a radiant tube burner: isothermal flow

This paper presents the first part of a study of the combustion processes in an industrial radiant tube burner (RTB). The RTB is used typically in heat-treating furnaces. The work was initiated because of the need for improvements in burner lifetime and performance. The present paper is concerned with the flow of combustion air; a future paper will address the combusting flow. A detailed three-dimensional computational fluid dynamics model of the burner was developed, validated with experimental air flow velocity measurements using a split-film probe. Satisfactory agreement was achieved using the k-e turbulence model. Various features along the air inlet passage were subsequently analysed. The effectiveness of the air recuperator swirler was found to be significantly compromised by the need for a generous assembly tolerance. Also, a substantial circumferential flow maldistribution introduced by the swirler is effectively removed by the positioning of a constriction in the downstream passage.

Flow processes in a radiant tube burner:combusting flow

This paper describes a study of the combustion process in an industrial radiant tube burner (RTB), used in heat treating furnaces, as part of an attempt to improve burner performance. A detailed three-dimensional Computational Fluid Dynamics model has been used, validated with experimental test furnace temperature and flue gas composition measurements. Simulations using the Eddy Dissipation combustion model with peak temperature limitation and the Discrete Transfer radiation model showed good agreement with temperature measurements in the inner and outer walls of the burner, as well as with flue gas composition measured at the exhaust (including NO). Other combustion and radiation models were also tested but gave inferior results in various aspects. The effects of certain RTB design features are analysed, and an analysis of the heat transfer processes within the burner is presented.

In situ imaging and height reconstruction of phase separation processes in polymer blends during spin coating

Spin coating polymer blend thin films provides a method to produce multiphase functional layers of high uniformity covering large surface areas. Applications for such layers include photovoltaics and light-emitting diodes where performance relies upon the nanoscale phase separation morphology of the spun film. Furthermore, at micrometer scales, phase separation provides a route to produce self-organized structures for templating applications. Understanding the factors that determine the final phase-separated morphology in these systems is consequently an important goal. However, it has to date proved problematic to fully test theoretical models for phase separation during spin coating, due to the high spin speeds, which has limited the spatial resolution of experimental data obtained during the coating process. Without this fundamental understanding, production of optimized micro- and nanoscale structures is hampered. Here, we have employed synchronized stroboscopic illumination together with the high light gathering sensitivity of an electron-multiplying charge-coupled device camera to optically observe structure evolution in such blends during spin coating. Furthermore the use of monochromatic illumination has allowed interference reconstruction of three-dimensional topographies of the spin-coated film as it dries and phase separates with nanometer precision. We have used this new method to directly observe the phase separation process during spinning for a polymer blend (PS-PI) for the first time, providing new insights into the spin-coating process and opening up a route to understand and control phase separation structures. © 2011 American Chemical Society.

Measurement of implicit leadership theories and their effect on leadership processes and outcomes

The leadership categorisation theory suggests that followers rely on a hierarchical cognitive structure in perceiving leaders and the leadership process, which consists of three levels; superordinate, basic and subordinate. The predominant view is that followers rely on Implicit Leadership Theories (ILTs) at the basic level in making judgments about managers. The thesis examines whether this presumption is true by proposing and testing two competing conceptualisations; namely the congruence between the basic level ILTs (general leader) and actual manager perceptions, and subordinate level ILTs (job-specific leader) and actual manager. The conceptualisation at the job-specific level builds on context-related assertions of the ILT explanatory models: leadership categorisation, information processing and connectionist network theories. Further, the thesis addresses the effects of ILT congruence at the group level. The hypothesised model suggests that Leader-Member Exchange (LMX) will act as a mediator between ILT congruence and outcomes. Three studies examined the proposed model. The first was cross-sectional with 175 students reporting on work experience during a 1-year industrial placement. The second was longitudinal and had a sample of 343 students engaging in a business simulation in groups with formal leadership. The final study was a cross-sectional survey in several organisations with a sample of 178. A novel approach was taken to congruence analysis; the hypothesised models were tested using Latent Congruence Modelling (LCM), which accounts for measurement error and overcomes the majority of limitations of traditional approaches. The first two studies confirm the traditional theorised view that employees rely on basic-level ILTs in making judgments about their managers with important implications, and show that LMX mediates the relationship between ILT congruence and work-related outcomes (performance, job satisfaction, well-being, task satisfaction, intragroup conflict, group satisfaction, team realness, team-member exchange, group performance). The third study confirms this with conflict, well-being, self-rated performance and commitment as outcomes.

Techno-economic assessment and uncertainty analysis of thermochemical processes for second generation biofuels

Biomass-To-Liquid (BTL) is one of the most promising low carbon processes available to support the expanding transportation sector. This multi-step process produces hydrocarbon fuels from biomass, the so-called “second generation biofuels” that, unlike first generation biofuels, have the ability to make use of a wider range of biomass feedstock than just plant oils and sugar/starch components. A BTL process based on gasification has yet to be commercialized. This work focuses on the techno-economic feasibility of nine BTL plants. The scope was limited to hydrocarbon products as these can be readily incorporated and integrated into conventional markets and supply chains. The evaluated BTL systems were based on pressurised oxygen gasification of wood biomass or bio-oil and they were characterised by different fuel synthesis processes including: Fischer-Tropsch synthesis, the Methanol to Gasoline (MTG) process and the Topsoe Integrated Gasoline (TIGAS) synthesis. This was the first time that these three fuel synthesis technologies were compared in a single, consistent evaluation. The selected process concepts were modelled using the process simulation software IPSEpro to determine mass balances, energy balances and product distributions. For each BTL concept, a cost model was developed in MS Excel to estimate capital, operating and production costs. An uncertainty analysis based on the Monte Carlo statistical method, was also carried out to examine how the uncertainty in the input parameters of the cost model could affect the output (i.e. production cost) of the model. This was the first time that an uncertainty analysis was included in a published techno-economic assessment study of BTL systems. It was found that bio-oil gasification cannot currently compete with solid biomass gasification due to the lower efficiencies and higher costs associated with the additional thermal conversion step of fast pyrolysis. Fischer-Tropsch synthesis was the most promising fuel synthesis technology for commercial production of liquid hydrocarbon fuels since it achieved higher efficiencies and lower costs than TIGAS and MTG. None of the BTL systems were competitive with conventional fossil fuel plants. However, if government tax take was reduced by approximately 33% or a subsidy of £55/t dry biomass was available, transport biofuels could be competitive with conventional fuels. Large scale biofuel production may be possible in the long term through subsidies, fuels price rises and legislation.