952 resultados para Stress strain tests


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Central Governor Model (CGM) suggests that perturbations in the rate of heat storage (AS) are centrally integrated to regulate exercise intensity in a feed-forward fashion to prevent excessive thermal strain. We directly tested the CGM by manipulating ambient temperature (Tam) at 20-minute intervals from 20°C to 35°C, and returning to 20°C, while cycling at a set rate of perceived exertion (RPE). The synchronicity of power output (PO) with changes in HS and Tam were quantified using Auto-Regressive Integrated Moving Averages analysis. PO fluctuated irregularly but was not significantly correlated to changes in thermo physiological status. Repeated measures indicated no changes in lactate accumulation. In conclusion, real time dynamic sensation of Tam and integration of HS does not directly influence voluntary pacing strategies during sub-maximal cycling at a constant RPE while non-significant changes in blood lactate suggest an absence of peripheral fatigue.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Wine produced using an appassimento-type process represents a new and exciting innovation for the Ontario wine industry. This process involves drying grapes that have already been picked from the vine, which increases the sugar content due to dehydration and induces a variety of changes both within and on the surface of the grapes. Increasing sugar contents in musts subject wine yeast to conditions of high osmolarity during alcoholic fermentations. Under these conditions, yeast growth can be inhibited, target alcohol levels may not be attained and metabolic by-products of the hyperosmotic stress response, including glycerol and acetic acid, may impact wine composition. The further metabolism of acetic acid to acetylCoA by yeast facilitates the synthesis of ethyl acetate, a volatile compound that can also impact wine quality if present in sufficiently high concentrations. The first objective of this project was to understand the effect of yeast strain and sugar concentration on fermentation kinetics and metabolite formation, notably acetic acid and ethyl acetate, during fermentation in appassimento-type must. Our working hypotheses were that (1) the natural isolate Saccharomyces bayanus would produce less acetic acid and ethyl acetate compared to Saccharomyces cerevisiae strain EC-1118 fermenting the high and low sugar juices; (2) the wine produced using the appassimento process would contain higher levels of acetic acid and lower levels of ethyl acetate compared to table wine; (3) and the strains would be similar in the kinetic behavior of their fermentation performances in the high sugar must. This study determined that the S. bayanus strain produced significantly less acetic acid and ethyl acetate in the appassimento wine and table wine fermentations. Differences in acetic acid and ethyl acetate production were also observed within strains fermenting the two sugar conditions. Acetic acid production was higher in table wine fermented by S. bayanus as no acetic acid was produced in appassimento-style wine, and 1.4-times higher in appassimento wine fermented by EC-1118 over that found in table wine. Ethyl acetate production was 27.6-times higher in table wine fermented by S. bayanus, and 5.2-times higher by EC-1118, compared to that in appassimento wine. Sugar utilization and ethanol production were comparable between strains as no significant differences were determined. The second objective of this project was to bring a method in-house for measuring the concentration of pyridine nucleotides, NAD+, NADP+, NADH and NADPH, in yeast cytosolic extract. Development of this method is of applicative interest for our lab group as it will enable the redox balance of the NAD+/ NADH and NADP+/ NADPH systems to be assessed during high sugar fermentations to determine their respective roles as metabolic triggers for acetic acid production. Two methods were evaluated in this study including a UV-endpoint method using a set of enzymatic assay protocols outlined in Bergmeyer (1974) and a colorimetric enzyme cycling method developed by Sigma-Aldrich® using commercial kits. The former was determined to be limited by its low sensitivity following application to yeast extract and subsequent coenzyme analyses, while the latter was shown to exhibit greater sensitivity. The results obtained from the kits indicated high linearity, accuracy and precision of the analytical method for measuring NADH and NADPH, and that it was sensitive enough to measure the low coenzyme concentrations present in yeast extract samples. NADtotal and NADPtotal concentrations were determined to be above the lower limit of quantification and within the range of the respective calibration curves, making this method suitable for our research purposes.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Le but de cette thèse est premièrement d’évaluer l’effet du vieillissement sur les fonctions psychomotrices des souches de souris sélectionnées génétiquement en fonction de leur tension artérielle (TA); deuxièmement, de localiser les déterminants génétiques des phénotypes psychophysiologiques à partir de souches recombinantes congéniques (RCS). Ces travaux ont mené à la publication de 4 articles. Le premier article décrit l’évaluation des fonctions psychomotrices des souches avec une tension artérielle élevée (HBP), basse (LBP) et normale (NBP). La performance aux épreuves d’exploration, d’habiletés motrices et d’apprentissage spatial, a été mesurée sur deux cohortes âgées respectivement de 12 mois et de trois mois. Indépendamment de l’âge, les HBPs sont hyperactives dans l’open-field (OF), mais pas dans le test d’exploration de trous. Inversement, les LBP explorent moins d’espaces que les NBP et, à trois mois seulement, sont hypoactives dans l’OF. Par ailleurs, les HBPs et les LBP présentent des déficits précoces de coordination motrice et des fonctions visuo-motrices. Le second article concerne l’évaluation longitudinale de la coordination motrice, de l’anxiété et de l’apprentissage spatial des souches HBP, LBP et NBP, à l’âge de deux mois et de 12 mois. Le vieillissement accentue l’hyperactivité des HBPs dans l’OF. Par contre, l’hypoactivité des souris LBP est détectable seulement à l’âge de deux mois. Indépendamment de l’âge, les souris HBP et LBP montrent une perception réduite du danger dans l’épreuve d’anxiété et des dysfonctions visuo-motrices au labyrinthe aquatique. Enfin, des déficits précoces de coordination motrice se manifestent seulement chez les HBPs. Il reste à déterminer si les déficits observés sont liés à des déterminants génétiques indépendants ou secondaires aux altérations de la tension artérielle. Le troisième article présente la comparaison entre les souches consanguines A/J et C57Bl/6J (B6) aux épreuves de l’OF, de la planche à trous, du labyrinthe aquatique et du cintre (coordination motrice). Les B6 explore d’avantage l’OF et la planche à trous. Les B6 sont moins rapides sur le cintre, mais supérieurs aux A/J dans le labyrinthe aquatique, avec une plate-forme invisible ou visible. Ces résultats démontrent l’implication de déterminants génétiques. Cette thèse se termine par un quatrième article sur la localisation des déterminants génétiques de la susceptibilité au stress dans les RCS, dérivées de A/J et B6, et présentant un agencement spécifique de 12.5% du génome. La réactivité émotionnelle est évaluée dans l’OF et le plus-maze; la réponse de stress est mesurée par radio télémétrie de la température interne pendant le stress d’immobilisation (SI) sous diète régulière et riche en sel; l’excrétion des électrolytes urinaires est dosée après 24 heures de diète salée. Les loci les plus significatifs sont situés dans les régions suivantes: de l’émotionalité dans l’OF (Emo1) sur le chr. 1 (LOD=4.6) correspondant à la région homologue impliquée dans la cohorte d’hypertension familiale du Saguenay; de la dopa décarboxylase (ddc) sur le chr. 11 pour l’émergence du plus-maze (LOD=4.7); de la protéine liant l’endotoxine (lbp) sur le chr. 2 pour l’hypothermie initiale en réponse au SI (LOD=4); et de HSP90 sur le chr. 12 pour l’excrétion de Ca++ (LOD=4.6). Des banques de données sont ensuite interrogées pour recenser les polymorphismes des régions régulatrices ou codantes des gènes candidats chez les souches ancestrales A/J et B6, dont les séquences sont disponibles pour le génome entier. Des utilitaires web permettent de dévoiler les changements dans la structure secondaire de l’ARNm, l’interférence avec des microARN ou avec d’autres motifs de liaison. Plusieurs SNPs fonctionnels ont été identifiés pour le QTL du chr. 1, particulièrement dans les éléments de régulation; ceux-ci impliquant des gènes reliés avec les réponses inflammatoire/immunitaire ou avec le système cardiovasculaire. La quantification par la PCR confirme une régulation à la baisse d’atp1a2 dans le cœur et le cerveau des souches susceptibles à l’anxiété. Ces résultats confirment l’intrication des altérations de la susceptibilité au stress et de la régulation de la TA.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

L’objectif central de cette thèse de Doctorat était d’investiguer les dysfonctions mitochondriales qui surviennent précocement au cours de la phase compensée du remodelage ventriculaire pathologique et qui pourraient jouer un rôle causal dans la progression vers l’insuffisance cardiaque. Nos travaux antérieurs, réalisés à l’aide d’un modèle de surcharge volumique chronique induite par une fistule aorto-cavale (ACF) chez le Rat WKHA, ont montré qu’au cours du remodelage ventriculaire, les mitochondries développaient une vulnérabilité à l’ouverture du pore de perméabilité transitionnelle (PTP : un élément clé de la signalisation de la mort cellulaire) [1]. Ceci était observable au stade compensé du remodelage en absence des dysfonctions mitochondriales majeures typiquement observées dans le cœur insuffisant. Ces résultats nous ont amenés à suggérer que la vulnérabilité à l’ouverture du PTP pourrait constituer un mécanisme précoce favorisant la progression de la cardiopathie. Dans l’étude 1 de cette thèse, nous avons tenté de tester cette hypothèse en induisant une ACF chez deux souches de rats affichant de très nettes différences au niveau de la propension à développer l’insuffisance cardiaque : les souches WKHA et Sprague Dawley (SD). Nos études in vitro sur organelles isolées et in situ sur l’organe entier ont permis de confirmer que, dans le cœur ACF, les mitochondries développent une vulnérabilité à l’ouverture du PTP et à l’activation de la voie mitochondriale de la mort cellulaire lorsqu’exposées à des stress pertinents à la pathologie (surcharge calcique, ischémie-reperfusion [I-R]). Cependant, bien que comparativement aux animaux WKHA, les animaux SD démontraient un remodelage ventriculaire plus rapide et prononcé et une progression précoce vers l’insuffisance cardiaque, aucune différence n’était observable entre les deux groupes au niveau des dysfonctions mitochondriales, suggérant quelles ne sont pas à l’origine de la progression plus rapide de la pathologie chez la souche SD, à tout le moins en réponse à la surcharge volumique. Nous avons par la suite déterminé, à l’aide des mêmes approches expérimentales, si cette vulnérabilité mitochondriale était observable dans une cardiopathie d’étiologie différente, plus spécifiquement celle qui est associée à la dystrophie musculaire de Duchenne (DMD), une maladie génétique causée par une mutation de la protéine dystrophine. Nos études menées (études 2-4) sur de jeunes souris mdx (le modèle murin de la DMD) exemptes de tout signe clinique de cardiopathie n’ont révélé aucune différence au niveau des fonctions mitochondriales de base. Cependant, tout comme dans le modèle d’ACF, les mitochondries dans le cœur de souris mdx étaient significativement plus vulnérables à l’ouverture du PTP lorsque soumises à une I-R (étude 2). Par ailleurs, nous avons démontré que l’administration aiguë de sildénafil aux souris mdx induisait une abolition de l’ouverture du PTP et de ses conséquences signalétiques, une diminution marquée du dommage tissulaire et une meilleure récupération fonctionnelle à la suite de l’I-R (étude 3). Nous avons ensuite testé chez la souris mdx l’administration aiguë de SS31, un peptide anti-oxydant ciblé aux mitochondries, cependant aucun effet protecteur n’a été observé, suggérant que le tamponnement des radicaux libres est d’une utilité limitée si les perturbations de l’homéostasie calcique typiques à cette pathologie ne sont pas traitées simultanément (étude 4). Globalement, les travaux effectués au cours de cette thèse démontrent que la vulnérabilité à l’ouverture du PTP constitue une dysfonction précoce et commune qui survient au cours de remodelages ventriculaires pathologiques d’étiologies différentes. Par ailleurs, ces travaux suggèrent des stratégies d’intervention pharmacologiques ciblant ce processus, dont l’efficacité pour la prévention de l’insuffisance cardiaque demande à être établie.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This exploratory study intends to characterize the neuropsychological profile in persons with post-traumatic stress disorder (PTSD) and mild traumatic brain injury (mTBI) using objective measures of cognitive performance. A neuropsychological battery of tests for attention, memory and executive functions was administered to four groups: PTSD (n = 25), mTBI (n = 19), subjects with two formal diagnoses: Post-traumatic Stress Disorder and Mild Traumatic Brain Injury (mTBI/PTSD) (n = 6) and controls (n = 25). Confounding variables, such as medical, developmental or neurological antecedents, were controlled and measures of co-morbid conditions, such as depression and anxiety, were considered. The PTSD and mTBI/PTSD groups reported more anxiety and depressive symptoms. They also presented more cognitive deficits than the mTBI group. Since the two PTSD groups differ in severity of PTSD symptoms but not in severity of depression and anxiety symptoms, the PTSD condition could not be considered as the unique factor affecting the results. The findings underline the importance of controlling for confounding medical and psychological co-morbidities in the evaluation and treatment of PTSD populations, especially when a concomitant mTBI is also suspected.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

La mémoire immunitaire permet à l’organisme de se souvenir de tous les agents pathogènes rencontrés afin de pouvoir monter une réponse immunitaire plus rapide et plus efficace en cas de réinfection. Après la phase de contraction de la réponse primaire, les lymphocytes T CD8 mémoires survivent grâce à la présence de cytokines telle que l’interleukine 15 (IL-15). Ces cellules permettent aussi au système immunitaire de contrôler les virus latents n’ayant pas été totalement éliminés de l’hôte. Les situations de stress chronique affectent le système immunitaire provoquant la réactivation des virus latents. Des titres viraux élevés de virus de la famille Herspeviridea ont été observés chez les astronautes à leur retour de mission, suggérant que les hormones libérées en situation de stress auraient un impact négatif sur les lymphocytes T CD8+ mémoires. Un modèle de stress chronique in vitro chez la souris a été élaboré en ajoutant de la corticostérone à des lymphocytes T CD8+ mémoires. Il a ainsi été démontré que l’hormone de stress avait un effet pro-apoptotique sur ces cellules et que cet effet était partiellement inhibé par l’IL-15. Des cibles moléculaires ont aussi été identifiées afin de suivre la fonction immunitaire mémoire lors des vols spatiaux à l’aide du cytomètre en flux Microflow1, une nouvelle plateforme portative de diagnostic biomédical. Les résultats des tests en laboratoire puis dans la Station Spatiale Internationale (SSI) démontrent qu’il sera possible de suivre la fonction immunitaire mémoire et les marqueurs de stress en temps réel lors des vols spatiaux.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Le système hématopoïétique est un tissu en constant renouvellement et les cellules souches hématopoïétiques (CSHs) sont indispensables pour soutenir la production des cellules matures du sang. Deux fonctions définissent les CSHs; la propriété d’auto-renouvellement, soit la capacité de préserver l’identité cellulaire suivant une division, et la multipotence, le potentiel de différenciation permettant de générer toutes les lignées hématopoïétiques. Chez l’adulte, la majorité des CSHs sont quiescentes et l’altération de cet état corrèle avec une diminution du potentiel de reconstitution des CSHs, suggérant que la quiescence protège les fonctions des CSHs. La quiescence est un état réversible et dynamique et les réseaux génétiques le contrôlant restent peu connus. Un nombre croissant d’évidences suggère que si à l’état d’homéostasie il y a une certaine redondance entre les gènes impliqués dans ces réseaux de contrôle, leurs rôles spécifiques sont révélés en situation de stress. La famille des bHLHs (basic helix-loop-helix) inclue différentes classes des protéines dont ceux qui sont tissu-spécifiques comme SCL, et les protéines E, comme E12/E47 et HEB. Certains bHLHs sont proposés êtres important pour la fonction des cellules souches, mais cela ne fait pas l’unanimité, car selon le contexte cellulaire, il y a redondance entre ces facteurs. La question reste donc entière, y a-t-il un rôle redondant entre les bHLHs d’une même classe pour la fonction à long-terme des CSHs? Les travaux présentés dans cette thèse visaient dans un premier temps à explorer le lien encore mal compris entre la quiescence et la fonction des CSHs en mesurant leurs facultés suite à un stress prolifératif intense et dans un deuxième temps, investiguer l’importance et la spécificité de trois gènes pour la fonction des CSHs adultes, soit Scl/Tal1, E2a/Tcf3 et Heb/Tcf12. Pour répondre à ces questions, une approche cellulaire (stress prolifératif) a été combinée avec une approche génétique (invalidation génique). Plus précisément, la résistance des CSHs au stress prolifératif a été étudiée en utilisant deux tests fonctionnels quantitatifs optimisés, soit un traitement basé sur le 5-fluorouracil, une drogue de chimiothérapie, et la transplantation sérielle en nombre limite. Dans la mesure où la fonction d’un réseau génique ne peut être révélée que par une perturbation intrinsèque, trois modèles de souris, i.e. Scl+/-, E2a+/- et Heb+/- ont été utilisés. Ceci a permis de révéler que l’adaptation des CSHs au stress prolifératif et le retour à l’équilibre est strictement contrôlé par les niveaux de Scl, lesquels règlent le métabolisme cellulaire des CSHs en maintenant l’expression de gènes ribosomaux à un niveau basal. D’autre part, bien que les composantes du réseau puissent paraître redondants à l’équilibre, mes travaux montrent qu’en situation de stress prolifératif, les niveaux de Heb restreignent la prolifération excessive des CSHs en induisant la sénescence et que cette fonction ne peut pas être compensée par E2a. En conclusion, les résultats présentés dans cette thèse montrent que les CSHs peuvent tolérer un stress prolifératif intense ainsi que des dommages à l’ADN non-réparés, tout en maintenant leur capacité de reconstituer l’hématopoïèse à long-terme. Cela implique cependant que leur métabolisme revienne au niveau de base, soit celui trouvé à l’état d’homéostasie. Par contre, avec l’augmentation du nombre de division cellulaire les CSHs atteignent éventuellement une limite d’expansion et entrent en sénescence.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The stress relaxation behavior of polyurethane elastomer and short polyester fiber filled elastomer composites with and without bonding agents at different strain levels and strain rates was studied. It was found that these compounds exhibit a multistage relaxation mechanism and that the rate of relaxation and cross-over time depend on the strain level and strain rate. The incorporation of fibers reduced the stage-I relaxation rate and increased the cross-over time of the gum vulcanisate. A higher rate of relaxation (first stage) was shown by the composites with longitudinal fiber orientation and composites with bonding agents.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Investigations on the fracture behaviour of polymer blends is the topic of this thesis. The blends selected are PP/HDPE and PS/HIPS. PP/HDPE blend is chosen due to its commercial importance and PS/HIPS blend is selected to study the transition from brittle fracture to ductile fracture.PP/HDPE blends were prepared at different compositions by melt blending at 180°C and fracture failure process was investigated by conducting notch sensitivity test and tensile test at different strain rates. The effects of two types of modifiers (particulate and elastomer) on the fracture behaviour and notch sensitivity of PP/HDPE blends were studied. The modifiers used are calcium carbonate, a hard particulate filler commonly used in plastics and Ethylene Propylene Diene Monomer (EPDM). They were added in 2%, 4% and 6% by weight of the blends.The study shows that the mechanical properties of PP/HDPE blends can be optimized by selecting proper blend compositions. The selected modifiers are found to alter and improve the fracture behaviour and notch sensitivity of the blends. Particulate fillers like calcium carbonate can be used for making the mechanical behaviour more stable at the various blend compositions. The resistance to notch sensitivity of the blends is found to be marginally lower in the presence of calcium carbonate. The elastomeric modifier EPDM produces a better stability of the mechanical behaviour. A low concentration of EPDM is sufficient to effect such a change. EPDM significantly improves the resistance to notch sensitivity of the blends. The study shows that judicious selection of modifiers can improve the fracture behaviour and notch sensitivity of PP/HDPE blends and help these materials to be used for critical applications.For investigating the transition in fracture behaviour and failure modes, PS/HIPS blends were selected. The blends were prepared by melt mixing followed by injection moulding to prepare the specimens for conducting tensile, impact and flexure tests. These tests were used to simulate the various conditions which promote failure.The tensile behaviour of unnotched and notched PS/HIPS blend samples were evaluated at slow speeds. Tensile strengths and moduli were found to increase at the higher testing speed for all the blend combinations whereas maximum strain at break was found to decrease. For a particular speed of testing, the tensile strength and modulus show only a very slight decrease as HIPS content is increased up to about 40%. However, there is a drastic decrease on increasing the HIPS content thereafter.The maximum strain at break shows only a very slight change up to about 40% HIPS content and thereafter shows a remarkable increase. The notched specimens also follow a comparable trend even though the notch sensitivity is seen high for PS rich blends containing up to 40% HIPS. The notch sensitivity marginally decreases with increase in HIPS content. At the same time, it is found to increase with the increase in strain rate. It is observed that blends containing more than 40% HIPS fail in ductile mode.The impact characteristics of PSIHIPS blends studied were impact strength, the energy absorbed by the test specimen and impact toughness. Remarkable increase in impact strength is observed as HIPS content in the blend exceeds 40%. The energy absorbed by the test specimens and the impact toughness also show a comparable trend.Flexural testing which helps to characterize the load bearing capacity was conducted on PS/HIPS blend samples at the two different testing speeds of 5mmlmin and 10 mm/min. The flexural strength increases with increase in testing speed for all the blend compositions. At both the speeds, remarkable reduction in flexural strength is observed as HIPS content in the blend exceeds 40%. The flexural strain and flexural energy absorbed by the specimens are found to increase with increase in HIPS content. At both the testing speeds, brittle fracture is observed for PS rich blends whereas HIPS rich blends show ductile mode of failure.Photoelastic investigations were conducted on PS/HIPS blend samples to analyze their failure modes. A plane polariscope with a broad source of light was utilized for the study. The coloured isochromatic fringes formed indicate the presence of residual stress concentration in the blend samples. The coverage made by the fringes on the test specimens varies with the blend composition and it shows a reducing trend with the increase in HIPS content. This indicates that the presence of residual stress is a contributing factor leading to brittle fracture in PS rich blends and this tendency gradually falls with increase in HIPS content and leads to their ductile mode of failure.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The study envisaged herein contains the numerical investigations on Perforated Plate (PP) as well as numerical and experimental investigations on Perforated Plate with Lining (PPL) which has a variety of applications in underwater engineering especially related to defence applications. Finite element method has been adopted as the tool for analysis of PP and PPL. The commercial software ANSYS has been used for static and free vibration response evaluation, whereas ANSYS LS-DYNA has been used for shock analysis. SHELL63, SHELL93, SOLID45, SOLSH190, BEAM188 and FLUID30 finite elements available in the ANSYS library as well as SHELL193 and SOLID194 available in the ANSYS LS-DYNA library have been made use of. Unit cell of the PP and PPL which is a miniature of the original plate with 16 perforations have been used. Based upon the convergence characteristics, the utility of SHELL63 element for the analysis of PP and PPL, and the required mesh density are brought out. The effect of perforation, geometry and orientation of perforation, boundary conditions and lining plate are investigated for various configurations. Stress concentration and deflection factor are also studied. Based on these investigations, stadium geometry perforation with horizontal orientation is recommended for further analysis.Linear and nonlinear static analysis of PP and PPL subjected to unit normal pressure has been carried out besides the free vibration analysis. Shock analysis has also been carried out on these structural components. The analytical model measures 0.9m x 0.9m with stiffener of 0.3m interval. The influence of finite element, boundary conditions, and lining plate on linear static response has been estimated and presented. Comparison of behavior of PP and PPL in the nonlinear strain regime has been made using geometric nonlinear analysis. Free vibration analysis of the PP and PPL has been carried out ‘in vacuum’ condition and in water backed condition, and the influence of water backed condition and effect of perforation on natural frequency have been investigated.Based upon the studies on the vibration characteristics of NPP, PP and PPL in water backed condition and ‘in vacuum’ condition, the reduction in the natural frequency of the plate in immersed condition has been rightly brought out. The necessity to introduce the effect of water medium in the analysis of water backed underwater structure has been highlighted.Shock analysis of PP and PPL for three explosives viz., PEK, TNT and C4 has been carried out and deflection and stresses on plate as well as free field pressure have been estimated using ANSYS LS-DYNA. The effect of perforations and the effect of lining plate have been predicted. Experimental investigations of the measurement of free field pressure using PPL have been conducted in a shock tank. Free field pressure has been measured and has been validated with finite element analysis results. Besides, an experiment has been carried out on PPL, for the comparison of the static deflection predicted by finite element analysis.The distribution of the free field pressure and the estimation of differential pressure from experimentation and the provision for treating the differential pressure as the resistance, as a part of the design load for PPL, has been brought out.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Das Werkstoffverhalten von stahlfaserfreiem bzw. stahlfaserverstärktem Stahlbeton unter biaxialle Druck- Zugbeanspruchung wurde experimentell und theoretisch untersucht. Die Basis der experimentellen Untersuchungen waren zahlreiche Versuche, die in der Vergangenheit an faserfreiem Stahlbetonscheiben zur Bestimmung des Werkstoffverhaltens von gerissenem Stahlbeton im ebenen Spannungszustand durchgeführt wurden. Bei diesen Untersuchungen wurde festgestellt, dass infolge einer Querzugbeanspruchung eine Abminderung der biaxialen Druckfestigkeit entsteht. Unter Berücksichtigung dieser Erkenntnisse sind zur Verbesserung der Werkstoffeigenschaften des Betons, Stahlbetonscheiben aus stahlfaserverstärktem Beton hergestellt worden. Die aus der Literatur bekannten Werkstoffmodelle für Beton sowie Stahlbeton, im ungerissenen und gerissenen Zustand wurden hinsichtlich der in der Vergangenheit ermittelten Materialeigenschaften des Betons bzw. Stahlbetons unter proportionalen sowie nichtproportionalen äußeren Belastungen erklärt und kritisch untersucht. In den frischen Beton wurden Stahlfasern hinzugegeben. Dadurch konnte die Festigkeits- und die Materialsteifigkeitsabminderung infolge Rissbildung, die zur Schädigung des Verbundwerkstoffs Beton führt, reduziert werden. Man konnte sehen, dass der Druckfestigkeitsabminderungsfaktor und insbesondere die zur maximal aufnehmbaren Zylinderdruckfestigkeit gehörende Stauchung, durch Zugabe von Stahlfasern besser begrenzt wird. Die experimentelle Untersuchungen wurden an sechs faserfreien und sieben stahlfaserverstärkten Stahlbetonscheiben unter Druck-Zugbelastung zur Bestimmung des Verhaltens des gerissenen faserfreien und stahlfaserverstärkten Stahlbetons durchgeführt. Die aus eigenen Versuchen ermittelten Materialeigenschaften des Betons, des stahlfaserverstärkten Betons und Stahlbetons im gerissenen Zustand wurden dargelegt und diskutiert. Bei der Rissbildung des quasi- spröden Werkstoffs Beton und dem stahlfaserverstärkten Beton wurde neben dem plastischen Fließen, auch die Abnahme des Elastizitätsmoduls festgestellt. Die Abminderung der aufnehmbaren Festigkeit und der zugehörigen Verzerrung lässt sich nicht mit der klassischen Fließtheorie der Plastizität ohne Modifizierung des Verfestigungsgesetzes erfassen. Es wurden auf elasto-plastischen Werkstoffmodellen basierende konstitutive Beziehungen für den faserfreien sowie den stahlfaserverstärkten Beton vorgeschlagen. Darüber hinaus wurde in der vorliegenden Arbeit eine auf dem elasto-plastischen Werkstoffmodell basierende konstitutive Beziehung für Beton und den stahlfaser-verstärkten Beton im gerissenen Zustand formuliert. Die formulierten Werkstoffmodelle wurden mittels dem in einer modularen Form aufgebauten nichtlinearen Finite Elemente Programm DIANA zu numerischen Untersuchungen an ausgewählten experimentell untersuchten Flächentragwerken, wie scheibenartigen-, plattenartigen- und Schalentragwerken aus faserfreiem sowie stahlfaserverstärktem Beton verwendet. Das entwickelte elasto-plastische Modell ermöglichte durch eine modifizierte effektive Spannungs-Verzerrungs-Beziehung für das Verfestigungsmodell, nicht nur die Erfassung des plastischen Fließens sondern auch die Berücksichtigung der Schädigung der Elastizitätsmodule infolge Mikrorissen sowie Makrorissen im Hauptzugspannungs-Hauptdruckspannungs-Bereich. Es wurde bei den numerischen Untersuchungen zur Ermittlung des Last-Verformungsverhaltens von scheibenartigen, plattenartigen- und Schalentragwerken aus faserfreiem und stahlfaserverstärktem Stahlbeton, im Vergleich mit den aus Versuchen ermittelten Ergebnissen, eine gute Übereinstimmung festgestellt.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conciliar el trabajo y la familia es una lucha cotidiana que cada persona realiza para satisfacer las exigencias de ambas dimensiones de su vida. El no tener consciencia del problema que surge en el empleado para lograr esta conciliación y la ausencia de soluciones eficaces a éste, no sólo afecta a la organización a través de la baja productividad, el absentismo, el aumento del estrés, entre otros efectos; sino también a la vida familiar, social, física y psicológica del trabajador. Es por ello, que este proyecto de grado busca a partir de la revisión de la literatura mostrar cómo la percepción que tienen los trabajadores de su equilibrio trabajo-familia, se ve influenciada por un factor organizativo, como lo son los turnos laborales; además evidenciar las soluciones que se han implementado en las diferentes empresas de manera exitósa, para finalmente plantear estrategias que se puedan aplicar en las organizaciones facilitando el equilibrio trabajo-familia de los trabajadores.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

El propósito de este estudio es evaluar la sensibilidad, especificidad y valores predictivos del Cuestionario Anamnésico de Síntomas de Miembro Superior y Columna (CASMSC) desarrollado por la Unidad de Investigación de Ergonomía de Postura y Movimiento (EPM). Se realizó un estudio descriptivo de tipo correlacional, mediante el análisis de datos secundarios de una base de datos con registros de trabajadores de la industria de alimentos (n=401) en el año 2013, a quienes se les había aplicado el CASMSC, así como una evaluación clínica fisioterapéutica enfocada en los mismos segmentos corporales; esta última utilizada como prueba de oro. Para analizar si existían diferencias estadísticas por edad, antigüedad y género se aplicó el análisis de varianza de una vía. La sensibilidad, especificidad y valores predictivos del CASMSC se informan con sus respectivos intervalos de confianza (95%). La prevalencia de umbral positivo para sospecha de Desorden Músculo Esquelético (DME) tanto de miembro superior como de columna se encontró muy por encima de la media nacional para el sector. La sensibilidad del CASMSC para miembro superior estuvo en el rango de un 80% a 94,57% y para columna cervical y lumbar fue de 36,4% y 43,4%, respectivamente. Para la región dorsal fue casi del doble de las otras dos regiones (85,7%). El CASMSC es recomendable en su apartado para miembro superior dado a su alto nivel de sensibilidad.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Los bomberos aeronáuticos son los encargados de atender todas las emergencias en los aeropuertos y sus cercanías. Estas emergencias incluyen emergencias aéreas, en tierra, eventos con materiales peligros e incendios, entre otros. Su trabajo tiene como características la realización de actividades durante periodos largos de baja intensidad y periodos cortos de alta intensidad. De acuerdo con estas características, es necesario que los bomberos aeronáuticos tengan una buena condición física. El consumo máximo de oxígeno (VO2 máx) como indicador de capacidad aeróbica resulta indispensable para conocer el desempeño de los bomberos en su trabajo. El objetivo de este estudio es determinar la capacidad aeróbica de los bomberos aeronáuticos y sus factores determinantes. Por tanto se desarrolló un estudio transversal de tipo descriptivo en una muestra de 23 hombres bomberos aeronáuticos. Se obtuvo información acerca de sus variables socio-demográficas, se determinó el VO2 máx y umbral ventilatorio mediante análisis de gases espirados durante un protocolo de ejercicio máximo sobre tapiz rodante, se evaluó la composición corporal mediante adipometría y se determinó el nivel de actividad física mediante el cuestionario internacional de actividad física IPAQ. Se encontró que la muestra tenia una edad de 32,6 ± 4,8 años, peso de 78,4 ± 9,8 kg, porcentaje de grasa de 14,8 ± 3,8 %, índice de masa corporal de 25,7 ± 2,7 y VO2máx de 44,6 ± 6. No se encontraron cambios significativos del VO2máx con la edad, pero si con la actividad física, porcentaje de grasa e índice de masa corporal. Se sugiere que el entrenamiento de los bomberos aeronáuticos durante su jornada laboral sea de intervalos de alta intensidad y que se monitorice su nivel de actividad física y composición corporal.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Introducción: La evaluación de la función miocárdica global y regional juega una papel crítico en el diagnóstico y manejo de los pacientes con enfermedad coronaria con importantes implicaciones pronosticas, las nuevas técnicas ecocardiográficas como la evaluación del STRAIN han sido validadas como una herramienta objetiva, comprehensiva y precisa para evaluar dichos parámetros. Objetivo: Determinar la capacidad del strain global longitudinal para la detección de estenosis coronaria significativa, número de territorios comprometidos y territorio anatómico del vaso culpable; en pacientes sin antecedentes de enfermedad coronaria previa con infarto agudo del miocardio. Diseño: estudio de pruebas diagnósticas retrospectivo en el que se utilizó como gold estándar la angiografía coronaria, se seleccionaron 64 pacientes con ecocardiograma transtorácico previo a la angiografía coronaria. Resultados: Se demostró una exactitud intermedia del strain global longitudinal para detectar estenosis coronaria por análisis de curvas ROC, con un área bajo la curva de 0,78 p= 0,000 (IC 0,6; 1,0), Una sensibilidad de 96.5% (91.7%, 101.3%), especificidad 40.0% (9.6%, 70.4%) y una prevalencia real del enfermedad coronaria de 85.1% (76.5%, 93.6%) Conclusiones: La medición de la función global y regional por medio del strain global longitudinal identifica pacientes con infarto agudo del miocardio que tienen estenosis coronaria significativa, número de territorios afectados, y la distribución anatómica de los posibles vasos culpables, sin embargo hay que tener precaución en su uso que sólo se limite a escenarios en donde pueda ser interpretado adecuadamente. Palabras clave: strain global bidimensional, detección de estenosis coronaria significativa, infarto del miocardio.