Staphylococcal food poisoning from cream-filled cake in a metropolitan area of South-Eastern Brazil

Twelve people became ill with vomiting and diarrhoea approximately four hours after eating cake with a cream filling at a birthday party and on the day following. The cake had been prepared by a food handler who had long experience in preparing foods for such functions. Staphylococcus aureus that produced enterotoxin A was isolated from the nose, the fingernails, and a healed infection on the neck of the food handler, and from the cake. Enterotoxin A was detected in the remaining portion of the cake. The cake, while still warm, had been refrigerated for one hour after it was prepared before it was removed for the party; it was refrigerated after the party. The cake was large (6 kg) and hence it was not adequately cooled in the hour during wich it was refrigerated before the party. The conclusion is that the cake was accidentally contaminated by the food handler and inadequately cooled before it was eaten.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 7- Behaviour of adults Nyssorhynchus anophelines with special reference to Anopheles albitarsis s.l. in South-Eastern Brazil

Results obtained with catches performed at several sites of the Ribeira Valley, SP (Brazil) are reported. Collections with Shannon type traps showed a concentration of An.albitarsis s.l. in the Experimental Farm of Pariquera-Açu County, associated with the development of irrigated rice cultivation. Two species of the complex, named A and B, were recognized. Species B predominated in the samples. Indoor and outdoor crepuscular human bait captures were performed a the domiciliary environment. The two species showed a generally low William's media valve of 0.2, the highest value obtained was 1.6. No differences were found between indoor and outdoor behaviours between the two species of the complex.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 8- Survey of adult behaviour of Spissipes Section species of Culex (Melanoconion) in South-Eastern Brazil

A study of Spissipes Section of Culex (Melanoconion) adults behaviour was carried out from August 1992 through December 1993 in human dominated (anthropic) environment in the Ribeira Valley, S.Paulo State, Brazil. By sampling at several sites it the dominance of Culex ribeirensis and Cx. sacchettae became evident even through a total number of ten species was recorded. Those two mosquitoes showed a clear tendency to frequent the domiciliary environment where they were caught, both indoor and outdoor, through the use of the human bait. In the outside environments, the residual patchy forests seems to display a concentration role, from which these adults spread to the open land and reach the dwellings. As their vector competence has been demonstrated through the virus isolations in natural conditions, it is advisable to pay attention to the presence of these mosquitoes in the man-made environment.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 9- Synanthropy and epidemiological vector role of Aedes scapularis in South-Eastern Brazil

Behaviour comparisons of Aedes scapularis and Ae. serratus are presented. Results were obtained by sampling Aedes adult mosquitoes at several places in the rural anthropic environment in the Ribeira Valley region of S. Paulo State, Brazil. Aedes dominance was shared by those two species, but Ae. scapularis Sshowed a clear tendency to frequent the modified environment, while Ae. serratus was to be found in the more preserved ones, here represented by the vestigial patchy forests. Regarding the open cultivated land and the dwelling environments, Ae. scapularis preponderates. Considering the regional developmental phases, this mosquito showed a remarkable increase in the modified environment differently from Ae. serratus that underwent a considerable decrease in migrating from the forest to the anthropic environment. As a consequence of these results it is reasonable to conclude that Ae. scapularis may be considered as an epidemiologically efficient vector and that it quite probably played this role in the Rocio encephalitis and other arbovirus epidemics.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 10- survey of adult behaviour of Culex nigripalpus and other species of Culex (Culex) in South-Eastern Brazil

A survey of adult behaviour of Culex (Culex) species was carried out from August 1992 through December 1993 in a human modified (anthropic) environment in the Ribeira Valley, S.Paulo State, Brazil. Culex nigripalpus dominated the catches at several sites and it's tendency to increase in the anthropic environment became quite clear. Nevertheless no high level of synanthropy was demonstrated. So it seems that the mosquito may have a restricted role in natural arbovirus cycles. Nonetheless, Cx. nigripalpus must be considered a potential vector of arboviruses, especially St. Louis encephalitis virus outside dwellings.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 11 - Biting activity and blood-seeking parity of Anopheles (Kerteszia) in South-Eastern Brazil

An. (Ker.) cruzii and An. (Ker.) bellator were monitored by the use of human bait and Shannon trap collections during a one-year period in 1994. Indoor and outdoor collections were made on human bait and inside the forest environment a Shannon trap was used. Both were undertaken in the evening crepuscular period. Results showed a greater abundance of An. cruzii in the forest, where as An. bellator was more abundant in the domiciliary environment. Through the application of the Polovodova method an age grading was established. Computing the parous and nulliparous females with Christopher's Stage III and above, more than 30.0% of blood-seeking specimens of both anophelines had had a previous blood meal. The higher abundance of An. bellator as compared with that of An. cruzii in the domiciliary environment may be explained by the influence of the neighboring low-lying coastal islands of the estuary system.

Occupational exposure to volatile organic compounds in the Portuguese printing industry

In the printing industry, volatile organic compounds main sources are the uses of organic solvents, fountain solutions and cleaning agents. Nowadays, one circumstance which might confuse the exposure reality is that the majority of solvents which are often used have a faint odour. Therefore, the conditions at offset printing in regard to solvent exposure may seem acceptable to workers. Fortunately, general ventilation and local exhaust systems have also become more common, and new printing machines, often with automatic cleaning, have entered the market. The health effects of volatile organic solvents are dependent on the chemicals involved but, normally, are associated with affecting the nervous system, the liver and also the kidneys. The purpose of this study was to document the conditions regarding exposure to volatile organic compounds in an offset printing unit and to permit identify task with higher exposure and with priority for preventive measures application. Exposure assessment was done before and after installation of general ventilation and local exhaust equipments and during printing and cleaning procedure.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment. 12- Host-seeking behaviour of Anopheles albitarsis s.l. in South-Eastern Brazil

Results obtained with Anopheles albitarsis s.l. catches mainly performed through human bait at the Ribeira Valley region, SP (Brazil), are reported. Two species of the complex were recognized, namely An. albitarsis s.s. and species B. This latter predominated both in the rice fields and in the dwelling environments. The crepuscular rhythms showed an unimodal sunset pattern with most blood-seeking females caught during dusk. The absence of differences between indoor and outdoor behavior was confirmed for both species of the complex.

Mortality among patients with non-affective functional psychoses in a metropolitan area of South-Eastern Brazil

High mortality rates among those suffering from schizophrenia and related psychoses have been consistently described in developed societies. However, to date there is a lack of data on this matter in Brazil. In order to examine this issue, a prospective 2-year follow-up study was carried out in S. Paulo. The sample consisted of 120 consecutive admissions to psychiatric hospitals in a defined catchment area, aged 18 to 44 years old, with clinical diagnoses of non-affective functional psychoses according to the ICD-9. After 2 years, 116 (96.7%) subjects were traced. During the study period there were 7 deaths (6.0% of those traced), 5 (4.3%) due to suicide. All but one of the suicides occurred in the first year after discharge from hospital. Age and sex Standardised Mortality Ratios (relative to rates for the population of the city of Sao Paulo) were 8.4 for overall mortality (95% confidence interval: 4.0-15.9) and 317.9 for deaths due to suicide (95% confidence interval: 125.2-668.3). These results are in agreement with previous studies, and show that in Brazil non-affective functional psychoses are life-threatening illnesses, which need adequate care, particularly when patients go back to live in the community after hospital discharge.

Projecto timecloud: software de gestão de tempo laboral numa plataforma cloud

O presente projecto tem como objectivo a disponibilização de uma plataforma de serviços para gestão e contabilização de tempo remunerável, através da marcação de horas de trabalho, férias e faltas (com ou sem justificação). Pretende-se a disponibilização de relatórios com base nesta informação e a possibilidade de análise automática dos dados, como por exemplo excesso de faltas e férias sobrepostas de trabalhadores. A ênfase do projecto está na disponibilização de uma arquitectura que facilite a inclusão destas funcionalidades. O projecto está implementado sobre a plataforma Google App Engine (i.e. GAE), de forma a disponibilizar uma solução sob o paradigma de Software as a Service, com garantia de disponibilidade e replicação de dados. A plataforma foi escolhida a partir da análise das principais plataformas cloud existentes: Google App Engine, Windows Azure e Amazon Web Services. Foram analisadas as características de cada plataforma, nomeadamente os modelos de programação, os modelos de dados disponibilizados, os serviços existentes e respectivos custos. A escolha da plataforma foi realizada com base nas suas características à data de iniciação do presente projecto. A solução está estruturada em camadas, com as seguintes componentes: interface da plataforma, lógica de negócio e lógica de acesso a dados. A interface disponibilizada está concebida com observação dos princípios arquitecturais REST, suportando dados nos formatos JSON e XML. A esta arquitectura base foi acrescentada uma componente de autorização, suportada em Spring-Security, sendo a autenticação delegada para os serviços Google Acounts. De forma a permitir o desacoplamento entre as várias camadas foi utilizado o padrão Dependency Injection. A utilização deste padrão reduz a dependência das tecnologias utilizadas nas diversas camadas. Foi implementado um protótipo, para a demonstração do trabalho realizado, que permite interagir com as funcionalidades do serviço implementadas, via pedidos AJAX. Neste protótipo tirou-se partido de várias bibliotecas javascript e padrões que simplificaram a sua realização, tal como o model-view-viewmodel através de data binding. Para dar suporte ao desenvolvimento do projecto foi adoptada uma abordagem de desenvolvimento ágil, baseada em Scrum, de forma a implementar os requisitos do sistema, expressos em user stories. De forma a garantir a qualidade da implementação do serviço foram realizados testes unitários, sendo também feita previamente a análise da funcionalidade e posteriormente produzida a documentação recorrendo a diagramas UML.

Palaeomagnetism, rock magnetism and AMS of the Cabo Magmatic Province, NE Brazil, and the opening of South Atlantic

P>Reconstruction of the South Atlantic opening has long been a matter of debate and several models have been proposed. One problem in tracing properly the Atlantic history arises from the existence of a long interval without geomagnetic reversals, the Cretaceous Normal Superchron, for which ages are difficult to assign. Palaeomagnetism may help in addressing this issue if high-quality palaeomagnetic poles are available for the two drifting continental blocks, and if precise absolute ages are available. In this work we have investigated the Cabo Magmatic Province, northeastern Brazil, recently dated at 102 +/- 1 Ma (zircon fission tracks, Ar39/Ar40). All volcanic and plutonic rocks showed stable thermal and AF demagnetization patterns, and exhibit primary magnetic signatures. AMS data also support a primary origin for the magnetic fabric and is interpreted to be contemporaneous of the rock formation. The obtained pole is located at 335.9 degrees E/87.9 degrees S (N = 24; A(95) = 2.5; K = 138) and satisfies modern quality criteria, resulting in a reference pole for South America at similar to 100 Ma. This new pole also gives an insight to test and discuss the kinematic models currently proposed for the South Atlantic opening during mid-Cretaceous.

MDAI: Model based Design in Automobile Industry

It is proposed a new approach based on a methodology, assisted by a tool, to create new products in the automobile industry based on previous defined processes and experiences inspired on a set of best practices or principles: it is based on high-level models or specifications; it is component-based architecture centric; it is based on generative programming techniques. This approach follows in essence the MDA (Model Driven Architecture) philosophy with some specific characteristics. We propose a repository that keeps related information, such as models, applications, design information, generated artifacts and even information concerning the development process itself (e.g., generation steps, tests and integration milestones). Generically, this methodology receives the users' requirements to a new product (e.g., functional, non-functional, product specification) as its main inputs and produces a set of artifacts (e.g., design parts, process validation output) as its main output, that will be integrated in the engineer design tool (e.g. CAD system) facilitating the work.

Assessment of the impact of the European CO2 emissions trading scheme on the Portuguese chemical industry

This paper describes an assessment of the impact of the enforcement of the European carbon dioxide (CO2) emissions trading scheme on the Portuguese chemical industry, based on cost structure, CO2 emissions, electricity consumption and allocated allowances data from a survey to four Portuguese representative units of the chemical industry sector, and considering scenarios that allow the estimation of increases on both direct and indirect production costs. These estimated cost increases were also compared with similar data from other European Industries, found in the references and with conclusions from simulation studies. Thus, it was possible to ascertain the impact of buying extra CO2 emission permits, which could be considered as limited. It was also found that this impact is somewhat lower than the impacts for other industrial sectors.

Industry concentration and market volatility

In this paper our aim is to gain a better understanding of the relationship between market volatility and industrial structure. As conflicting results have been documented regarding the relationship between market industry concentration and market volatility, this study investigates this relationship in the time series. We have found that this relationship is only significant and positive for Spain. Our results suggest that we cannot generalize across different countries that market industrial structure (concentration) is a significant factor in explaining market volatility.

Lighting conditions in assembling electrical industry

Proper lighting is a prerequisite for obtaining a good working environment. Good lighting includes quantity and quality requirements, and should necessarily be appropriate to the activity/task being carried out, bearing in mind the comfort and visual efficiency of the worker. Apart from the advantages in the health and welfare for the workers, good lighting also leads to better job performance (faster), less errors, better safety, fewer accidents and less absenteeism. The overall effect is: better productivity.