948 resultados para Somas conexas de superfícies
Resumo:
In this work, the influence of modifications of the cp-Ti and Ti 6Al 4V alloy, by treating the surface with NaOH and depositing titanium oxide and hydroxyapatite by sol-gel method, on their biocompatibility was studied. The coatings were characterized by scanning electron microscopy and X-ray diffraction which showed that the coatings on Ti 6Al 4V are better than on cp-Ti. Adhesion tests showed that adhesion strength of the coatings on cp-Ti substrate is less than on Ti 6Al 4V as well as cytotoxicity for L929 fibroblast cells is higher
Resumo:
Fracture surfaces are the fracture process marks, taht it is characterized by energy release guieded by failure mode. The fracture toughness express this energy em stress and strain terms in pre-cracked samples. The strectch zone is the characteristic region forms by the transition of fatigue fracture and final fracture and it width demonstrate the relation with failure energy release.The quantitative fractography is a broadly tool uses in failure surfaces characterization that it can point to a material’s aspect or a fracture process. The image processing works like an investigation tool, guinding a lot of studies in this area. In order to evaluate the characterization effectivity and it respectivity studies, it used 300M steel that it was thermal treated by an aeronautical process known and it characterized by tensile test and energy dispersive spectroscopy (EDS). The tensile test of this material, made by ASTM E8, allowed the head treatment effectivity confirmation, beyond of mechanics porperties determination. The EDS confirmed the material composition, beyond of base the discussion about fracture mechanism presence. The fracture toughness test has also made, that it works to obtain the fracture surfeaces studies below self-similarity and self-affinity approaches. In front of all the exposed it was possible to conclude that the fractal dimension works like a study parameter of fracture process, allowinf the relation of their values with changes in thickness, which interferes directly in material’s behaviour in fracture toughness approach
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Os solos, assim como as rochas, materiais inconsolidados e regolíticos, apresentam propriedades e características específicas, relativas a seus ambientes de formação. A partir de então o solo torna-se uma fonte de informação de toda a história evolutiva de uma região em seus mais variados parâmetros. Uma das formas de entender essa evolução dinâmica da paisagem é gerando um modelo de paleosuperfícies a partir da interpolação de confluências de drenagem. O trabalho objetivou reconstruir a paleogeografia da área inserida na bacia do Rio Jequitaí, a partir do Método de Isobases Confluentes, procurando analisar e identificar a evolução dos solos. A área está localizada na região centro-norte de Minas Gerais, sendo o Rio Jequitaí um afluente do Alto Rio São Francisco. O trabalho consistiu, na primeira etapa, em levantamento biblio/cartográfico da área em estudo. Durante esse levantamento, além de detectar as características físicas, bióticas e sócio-econômicas de modo a completar, reorganizar e adequar as informações da área, foi levantado um banco de dados base para a geração das Isobases, o qual foi constituído por modelos digitais de elevação (DEM) do programa ASTER e de dados vetoriais da principal rede de drenagem da bacia do Jequitaí. Na segunda etapa, as paleosuperfícies foram geradas usando aplicativos do programa ArcGis da ESRI. O produto final são as proto-superfícies para cada ordem de confluência. Assim no término do trabalho tem-se uma reconstrução da paleopaisagem correspondente, bem como das pro-estruturas equivalentes às condições de equilíbrio dinâmico daquele momento. A partir dos resultados obtidos foi possível concluir que a metodologia das Isobases Confluentes permite correlacionar os dados palinológicos, geocronológicos e geomorfológicos obtidos durante o estudo, para a reconstrução dos ambientes... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
The present study evaluated the use of semicircular bending test (SCB) as an alternative to conventional bending test to examine the effect of thermal shock. Still, studies the behavior of fracture surfaces generated by monofractal behavior analysis, which allows us to evaluate the contributions of the microstructure and the mechanical context in forming reliefs during the crack propagation. The fractal analysis is made from elevation maps obtained by reconstruction method by extension of the focus stacks of digital images acquired in microscope. The specimens used were samples semicircular pressed TiO2 (rutile) with and without heat shock, prepared for testing mode I loading. Were also produced, specimens in the form of bars for Weibull statistical analysis. From the three-point bending test, we found the variation of fracture toughness between the samples after the heat shock and natural condition. The SCB test was feasible for the analysis of thermal shock resistance. The results showed that the value of the fracture toughness decreases as the heat shock treatment
Resumo:
Classical statistical techniques which necessarily assume that all sampling units are random and independent were always used in the timber industry. Geostatistics considers that certain phenomena are characterized by spatial dependence: values of sampling units closer to each other tend to be more similar than values of sampling units farther away. This study aimed to characterize the spatial variability of the finishing (dyer) in the upper and lower surfaces of four edge glued panels by using geostatistical methods using geoR. Semivariograms were constructed for the analysis of spatial dependence. The spherical mathematical model was the best fit to the semivariograms generated, and was done the interpolation of the data (kriging) in samples where the distribution of dyer presents spatial dependence. In the bottom surfaces of two panels where the spatial dependence was detected geostatistical methods characterized a very large spatial variability due to the heterogeneous application of the finishing
Resumo:
In this work we study some topics of Celestial Mechanics, namely the problem of rigid body rotation and “spin-orbit” resonances. Emphasis is placed on the problem formulation and applications to some exoplanets with physical parameters (e.g. mass and radius) compatible with a terrestrial type constitution (e.g. rock) belonging to multiple planetary systems. The approach is both analytical and numerical. The analytical part consists of: i) the deduction of the equation of motion for the rotation problem of a spherical body with no symmetry, disturbed by a central body; ii) modeling the same problem by including a third-body in the planet-star system; iii) formulation of the concept of “spin-orbit” resonance in which the orbital period of the planet is an integer multiple of the rotation’s period. Topics of dynamical systems (e.g. equilibrium points, chaos, surface sections, etc.) will be included at this stage. In the numerical part simulations are performed with numerical models developed in the previous analytical section. As a first step we consider the orbit of the planet not perturbed by a third-body in the star-planet system. In this case the eccentricity and orbital semi-major axis of the planet are constants. Here the technique of surface sections, widely used in dynamical systems are applied. Next, we consider the action of a third body, developing a more realistic model for planetary rotation. The results in both cases are compared. Since the technique of disturbed surface sections is no longer applicable, we quantitatively evaluate the evolution of the characteristic angles of rotation (e.g. physical libration) by studying the evolution of individual orbits in the dynamically important regions of phase space, the latter obtained in the undisturbed case
Resumo:
Fins are a way to improve heat exchange, they increase the surface area in contact with the fluid medium. Besides widely used in industries, such extended surfaces appear in various formats and can be compared for their efficiencies in order to select the most profitable. This work proposes a new profile of fin so as to increase the perimeter of the base. The raised profile cross sectional area is constant and is also compared to other types. Here are shown the deductions of equations for this new element, and through the perimeter and graphs calculated results are compared
Resumo:
The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave
Resumo:
Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island
Resumo:
Pós-graduação em Medicina Veterinária - FCAV
Resumo:
Pós-graduação em Cirurgia Veterinária - FCAV
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
A survey we conducted, and bring expressed in this text is a preliminary study on the shape of asteroids and allowed us to understand a little more the dynamics around these bodies, in order that the images we have of asteroids are the most irregular possible. In this work, the asteroid is modeled by the method of the polyhedron, which provides a very good accuracy of the irregular shape of the body. Through study of models for non-spherical gravitational potential bodies, implementation of computational algorithms and numerical simulations a preliminary analysis was performed in relation to the shape of asteroids 4179 Toutatis, 6489 Golevka, 2063 Bacchus, 1620 Geographos and 1998 ML14, as well as regions of stability instability, we compute the coefficients of the gravitational potential. The work not only enables expansion for the case of asteroids, but also for other non-spherical bodies, contributing to the development of targeted studies the origin and evolution of the solar system, and perhaps the origin of the earth, and new technologies for modeling and mapping of non-spherical bodies. The main results were obtained by analyzing the graphics format and planning of asteroids, which confirmed how these bodies are irregular and show how distribution of non-homogeneous mass. Observe the behavior of the curves of zero velocity and equipotential curves as well as their respective surfaces. Also, compute some values of the gravitational potential and the spherical harmonic coefficients of each object. Furthermore, we find possible equilibrium points of asteroids except 4179 Toutatis, and analyze its stability