Changes in size and age at maturity of the northern stock of Tilefish (Lopholatilus chamaeleonticeps) after a period of overfishing

The modern fishery for Tilefish (Lopholatilus chamaeleonticeps) developed during the 1970s, offshore of southern New England, in the western North Atlantic Ocean. The population quickly became over exploited, with documented declines in catch rates and changes in demographic traits. In an earlier study, median size at maturity (L50) of males declined from 62.6 to 38.6 cm fork length (FL) and median age at maturity (A50) of males declined from 7.1 to 4.6 years between 1978 and 1982. As part of a cooperative research effort to improve the data-limited Tilefish assessment, we updated maturity parameter estimates through the use of an otolith aging method and macroscopic and microscopic evaluations of gonads. The vital rates for this species have continued to change, particularly for males. By 2008, male L50 and A50 had largely rebounded, to 54.1 cm FL and 5.9 years. Changes in female reproductive schedules were less variable among years, but the smallest L50 and youngest A50 were recorded in 2008. Tilefish are dimorphic, where the largest fish are male, and male spawning success is postulated to be socially mediated. These traits may explain the initial rapid decline and the subsequent rebound in male L50 and A50 and less dramatic effects on females. Other factors that likely contribute to the dynamics of maturity parameter estimates are the relatively short period of overfishing and the amount of time since efforts to rebuild this fishery began, as measured in numbers of generations. This study also confirms the gonochoristic sexual pattern of the northern stock, and it reveals evidence of age truncation and relatively high proportions of immature Tilefish in the recent catch.

Maternal effects on fecundity and egg quality of the Patagonian stock of Argentine Hake (Merluccius hubbsi)

The influences of age, size, and condition of spawning females on fecundity and oocyte quality were analyzed for the Patagonian stock of Argentine Hake (Merluccius hubbsi). Samples of mature females were collected in the spawning area as part of 2 research surveys conducted in January 2010 and 2011, during the peak of the reproductive season. Batch fecundity (BF) ranged between 40,500 (29 cm total length [TL]) and 2,550,000 (95 cm TL) hydrated oocytes, and was positively correlated with TL, gutted weight, age, hepatosomatic index (HSI), and the relative condition factor (Kn). Relative fecundity ranged between 85 and 1040 hydrated oocytes g–1 and showed significant positive relationships with gutted weight, HSI, and Kn; however, coefficients of determination were low for all regressions. Dry weights of samples of 100 hydrated oocytes ranged between 1.8 and 3.95 mg and were positively correlated with all variables analyzed, including batch and relative fecundity. Multiple regression models created with data of the morphophysiological characteristics of females supported maternal influences on fecundity and egg weights. Within the studied size range (29–95 cm TL), larger individuals had better somatic and egg condition, mainly revealed by higher HSI and hydrated oocytes with larger oil droplets (275.71μm [standard error 1.49]). These results were associated with the higher feeding activity of larger females during the spawning season in comparison with the feeding activity of young individuals (<5 years old); the better nutritional state of larger females, assumed to result from more feeding, was conducive to greater production of high-quality eggs.

Determinants of small-scale fishermen's income on Oman's Batinah Coast

The small-scale fishing industry of Oman is responsible for almost 90 percent of the total marine fishery production. It is also the main supplier of fish for Omani households. This study analyzes the factors that determine small-scale fishermen’s income on Oman’s Batinah Coast, which has almost 30 percent of Oman’s population and more than one-third of the small-scale fishermen. We find that fishermen’s income here can be explained broadly under four major blocks of variables: geographical region, fishing inputs and catch, socioeconomic and demographic characteristics, and the nature of the relationship with fisheries extension services. In general, the Wilayat (local administrative units) failed to make any significant impact on fishermen’s income. The variable “Fishing inputs and catch,” such as increases in engine power, boat length, weekly catch, and number of weekly trips, positively impacted fishermen’s income while increases in weekly fishing costs, number of crew members, and difficulty in getting ice had a significantly negative effect on the income. Furthermore, socioeconomic and demographic characteristics also contributed significantly in determining the fishermen’s income level. The other important findings were related to extension services. The variables “Fishermen’s exchange of information and cooperation with the ministry” and “Fishermen’s involvement in the extension activities” were found to have positive effects on fishermen’s income levels. Capitalizing on these findings could improve fishermen’s incomes and their lives across the region, as well as nationally.

An integrated biogeographic assessment of reef fish populations and fisheries in Dry Tortugas: Effects of No-take Reserves

The Tortugas Integrated Biogeographic Assessment presents a unique analysis of demographic changes in living resource populations, as well as societal and socioeconomic benefits that resulted from the Tortugas Ecological Reserves during the first five years after their implementation. In 2001, state and federal agencies established two no-take reserves within the region as part of the Florida Keys National Marine Sanctuary. The northern reserve (Tortugas Ecological Reserve North) was established adjacent to the Dry Tortugas National Park, which was first declared a national monument in 1935. The reserves were designed to protect a healthy coral reef ecosystem that supports diverse faunal assemblages and fisheries, serves as important spawning grounds for groupers and snappers, and includes essential feeding and breeding habitats for seabirds. The unique ecological qualities of the Tortugas region were recognized as far back as 1850, and it remains an important ecosystem and research area today. The two main goals of the Tortugas Ecological Reserve Integrated Ecological Assessment were: 1) to determine if demographic changes such as increases in abundance, average size and spawning potential of exploited populations occurred in the Tortugas region after reserve implementation; and 2) whether short-term economic losses occurred to fishers displaced by the reserve. This project utilized a biogeographic approach in which information on the physical features (i.e., habitat) and oceanographic patterns were first used to determine the spatial distribution of selected fish populations within and outside the Tortugas Ecological Reserve. Before-and-after reserve implementation comparisons of selected fish populations were then conducted to determine if demographic changes occurred in reef fish assemblages. These comparisons were done for the Tortugas region and also for a subset of available habitats within the Tortugas Ecological Reserve Study Area. Social and economic impacts of the reserves were determined through: 1) analyses of commercial landings and revenues from fishers, operating in the Tortugas region before and after reserve implementation and 2) surveys of recreational tour guides. Analyses of the commercial landings and revenues excluded areas inside Dry Tortugas National Park because commercial fishing has been prohibited within park boundaries since 1992. Key findings and outcomes of this integrated ecological assessment are organized by chapter and listed below.

Effects of density-dependence and sea surface temperature on interannual variation in length-at-age of chub mackerel (Scomber japonicus) in the Kuroshio-Oyashio area during 1970–1997

Annual mean fork length (FL) of the Pacific stock of chub mackerel (Scomber japonicus) was examined for the period of 1970–97. Fork length at age 0 (6 months old) was negatively correlated with year-class strength which fluctuated between 0.2 and 14 billion in number for age-0 fish. Total stock biomass was correlated with FL at age but was not a significant factor. Sea surface temperature (SST) between 38–40°N and 141–143°E during April–June was also negatively correlated with FL at age 0. A modified von Bertalanffy growth model that incorporated the effects of population density and SST on growth was well fitted to the observed FL at ages. The relative FL at age 0 for any given year class was maintained throughout the life span. The variability in size at age in the Pacific stock of chub mackerel is largely attributable to growth during the first six months after hatching.

Latitudinal and seasonal egg-size variation of the anchoveta (Engraulis ringens) off the Chilean coast

The anchoveta Engraulis ringens is widely distributed along the eastern South Pacific (from 4° to 42°S; Serra et al., 1979) and it has also supported one of the largest fisheries of the world over the last four decades. However, there are few interpopulation comparisons for either the adult or the younger stages. Reproductive traits, such as fecundity or spawning season length, are known to vary with latitude for some fish species (Blaxter and Hunter, 1982; Conover, 1990; Fleming and Gross, 1990; Castro and Cowen, 1991), and latitudinal trends for some early life history traits, such as egg size and larval growth rates, have been reported for others clupeiforms and other fishes (Blaxter and Hempel, 1963; Ciechomski, 1973; Imai and Tanaka, 1987, Conover 1990, Houde 1989). However, there is no published information on potential latitudinal trends during the adult or the early life history of the anchoveta, even though this type of information may help in understanding recruitment variability, especially during recurring large scale events (such as El Niño or La Niña) that affect the entire species range.

Effects of experimental harvest on red sea urchins (Strongylocentrotus franciscanus) in northern Washington

Commercial harvest of red sea urchins began in Washington state in 1971. Harvests peaked in the late 1980s and have since declined substantially in Washington and other areas of the U.S. west coast. We studied effects of experimental harvest on red sea urchins in San Juan Channel (SJC), a marine reserve in northern Washing-ton. We recorded changes in density and size distribution of sea urchin populations resulting from three levels of experimental harvest: 1) annual size-selective harvest (simulating cur-rent commercial urchin harvest regulations), 2) monthly complete (non–size selective) harvest, and 3) no harvest (control) sites. We also examined re-colonization rates of harvested sites. The red sea urchin population in SJC is composed of an accumulation of large, old individuals. Juvenile urchins represent less than 1% of the population. Lower and upper size limits for commercial harvest protect 5% and 45% of the population, respectively. Complete harvest reduced sea urchin densities by 95%. Annual size-selective harvest significantly decreased sea urchin densities by 67% in the first year and by 47% in the second year. Two years of size-selective harvest significantly altered the size distribution of urchins, decreasing the density of legal-size urchins. Recolonization of harvested sites varied seasonally and occurred primarily through immigration of adults. Selective harvest sites were recolonized to 51% and 38% of original densities, respectively, six months after the first and second annual harvests. Yields declined substantially in the second year of size-selective harvest because of the fishing down of the population and because of low recolonization rates of harvested sites. We recommend that managers consider the potential efficacy of marine harvest refuges and reevaluate the existing upper and lower size limits for commercial harvest to improve long-term management of the sea urchin fishery in Washington.

Climatic effects on flood frequency: an example from southern Arizona

EXTRACT (SEE PDF FOR FULL ABSTRACT): After 1960, the Santa Cruz River at Tucson, Arizona, an ephemeral stream normally dominated by summer floods, experienced an apparent increased frequency of flooding coincident with an increased percentage of annual floods occurring in fall and winter. This shift reflects large-scale and low-frequency changes in the eastern Pacific Ocean, in part associated with El Niño-Southern Oscillation (ENSO) phenomena. ... Questions are raised about the validity of standard methods of flood-frequency analysis to estimate regulatory and designed floods.

Offshore coho salmon populations near the Pacific Northwest and large-scale atmospheric events

EXTRACT (SEE PDF FOR FULL ABSTRACT): Catch of coho salmon off the coast of Washington and Oregon since 1925 appears to be related to large-scale events in the atmosphere, which in turn affect ocean currents and coastal upwelling intensities in the northeastern Pacific. At least two time scales of variations can be identified. The first is that of the El Nino/Southern Oscillation phenomenon giving rise to an irregular cycle of between 3 to 7 years. ... The second time scale of variation seems to have a periodicity of about 20 years, although this is based on a limited dataset. ... This paper endeavors to describe how, if real, these atmospheric/oceanic effects are integrated and might affect the salmon catch. The possibility must also be considered that the atmospheric events are symbiotically related to the oceanic events and, further, that both may be enmeshed in even longer-term variability of climate.

Interannual to decadal time-scale variations in glacier mass balance [abstract]

EXTRACT (SEE PDF FOR FULL ABSTRACT): The mass balance of glaciers depends on the seasonal variation in precipitation, temperature, and insolation. For glaciers in western North America, these meteorological variables are influenced by the large-scale atmospheric circulation over the northern Pacific Ocean. The purpose of this study is to gain a better understanding of the relationship between mass balance at glaciers in western North America and the large-scale atmospheric effects at interannual and decadal time scales.

Effects of rotating inlet distortion on multistage compressor stability

In multi-spool engines, rotating stall in an upstream compressor will impose a rotating distortion on the downstream compressor, thereby affecting its stability margin. In this paper experiments are described in which this effect was simulated by a rotating screen upstream of several multistage low-speed compressors. The measurements are complemented by, and compared with, a theoretical model of multistage compressor response to speed and direction of rotation of an inlet distortion. For co-rotating distortions (i.e., distortions rotating in the same direction as rotor rotation), experiments show that the compressors exhibited significant loss in stability margin and that they could be divided into two groups according to their response. The first group exhibited a single peak in stall margin degradation when the distortion speed corresponded to roughly 50% of rotor speed. The second group showed two peaks in stall margin degradation corresponding to distortion speeds of approximately 25-35% and 70-75% of rotor speed. These new results demonstrate that multistage compressors can have more than a single resonant response. Detailed measurements suggest that the two types of behavior are linked to differences between the stall inception processes observed for the two groups of compressors and that a direct connection thus exists between the observed forced response and the unsteady flow phenomena at stall onset. For counter-rotational distortions, all the compressors tested showed minimal loss of stability margin. The results imply that counter-rotation of the fan and core compressor, or LP and HP compressors, could be a worthwhile design choice. Calculations based on the two-dimensional theoretical model show excellent agreement for the compressors which had a single peak for stall margin degradation. We take this first-of-a-kind comparison as showing that the model, though simplified, captures the essential fluid dynamic features of the phenomena. Agreement is not good for compressors which had two peaks in the curve of stall margin shift versus distortion rotation speed. The discrepancy is attributed to the three-dimensional and short length scale nature of the stall inception process in these machines; this includes phenomena that have not yet been addressed in any model.

Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel

A ball-on-flat reciprocating micro-tribometer has been used to measure the friction coefficient between aluminium alloy strip and a steel ball. A relatively small ball and correspondingly low contact load is used to give a contact width of the order of 100μm, closer to asperity contact widths than generally found for this type of test. The effects of load, initial strip surface roughness, lubricants and boundary additives are investigated. It is found that the friction coefficient is significantly reduced by the addition of a lubricant. Observations of the wear tracks and ball surface show that the material transfer from aluminium to the ball is reduced in the presence of the lubricant. The initial friction coefficient is further reduced by the addition of a boundary additive, but the friction coefficient after 8 cycles is unchanged. Copyright © 2004 by Springer Science+Business Media, Inc.

Friction of sliding surfaces carrying adsorbed lubricant layers

In concentrated contacts the behaviour of lubricants is much modified by the high local pressures: changes can arise both from molecular ordering within the very thin film lubricant layers present at the interface as well as from the deposition on the component surfaces of more solid-like polymeric boundary layers. These 'third bodies' separating the solid surfaces may have rheological or mechanical properties very different from those observed in the bulk. Classical elasto-hydrodynamic theory considers the entrapped lubricant to exhibit a piezo-viscous behaviour while the conventional picture of more solid boundary lubricant layers views their shear strength r as being linearly dependent on local pressure p, so that T = TO + ap where TO and a are constants. If TO is relatively small, then the coefficient of friction \i = T Ip ~ a and so Amonton's laws are recovered. However, the properties of adsorbed or deposited surface films, or indeed other third bodies such as debris layers, may be more complex than this. A preliminary study has looked quantitatively at the influence of the pressure dependence of the shear strength of any surface layer on the overall friction coefficient of a contact which is made up of an array of asperities whose height varies in a Gaussian manner. Individual contact points may be elastic or plastic. The analysis results in plots of coefficient of friction versus the service or load parameter PIH&NRa where P is the nominal pressure on the contact, HS the hardness of the deforming surface, N the asperity density, R the mean radius of curvature of the asperities, and a is the standard deviation of their height distribution. In principle, any variation oft withp can be incorporated into the model; however, in this initial study we have used data on colloidal suspensions from the group at the Ecole Centrale de Lyon as well as examining the effect of functional relationships of somewhat greater complexity than a simple linear form. Results of the analysis indicate that variations in fj. are possible as the load is varied which depend on the statistical spread of behaviour at individual asperity contacts. The value of this analysis is that it attempts to combine the behaviour of films on the molecular scale with the topography of real engineering surfaces and so give an indication of the effects at the full-size or macro-scale that can be achieved by chemical or molecular surface engineering.

Scale structure, age and growth in the freshwater carp, Labeo calbasu (Pisces/Cyprinidae) from Harike wetland, India

Age structure and growth profile based on the scale studies of 468 specimens ranging from 17-62 cm total length of Labeo calbasu (Hamilton) from Harike wetland (30°13'N, 75°12'E), Punjab, India have been described, the present study showed better growth in terms of two important growth parameters namely index of species average size and population weight-growth intensity. Two distinct phases in its life history have been described that indicates the optimum exploitation of this species from this water body. Harvestable size is found to be fish of 34 cm total length. The detailed structural elaboration of scale (normal, regenerated, lateral line) has also been done using scanning electron microscopy (SEM).

Effects of dietary phosphorus and zinc levels on growth artd bone mineralization in fingerlings of rainbow trout, Oncorhynchus mykiss

A laboratory based 2 x 2 factorial experiment was conducted to investigate the influences of dietary phosphorus and zinc levels on growth and bone mineralization in fingerlings of rainbow trout for 21 weeks. Two levels of phosphorus (19 and 30 mg/g) and two levels of zinc (55 and 103 Ag/g) in the dry diets were tested. Duplicate tanks of 30 rainbow trout (average weight 1.56 ± 0.24 g) per 60L glass tank were fed experimental diets three times a day to apparent satiation level at 15 to 24°C water temperature. The results of the present study demonstrated that dietary phosphorus supplementation influenced the growth and bone mineralization whereas zinc levels significantly (p<0.05) influenced bone mineralization in rainbow trout. Further investigations in this area with different size and age groups of this fish are broadly needed.