FEM Analysis to Optimally Design End Mill cutters for Milling of Ti-6Al-4V

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering the cutting edge on a cutting tool as the curve of an intersection over a spherical/flat surface based on the model developed by Lee & Altinas [1]. Considering the lowest tool forces the cutting tool parameters are taken and optimal design of end mill is decided for different sizes. Then the 3D CAD models of the end mills are developed and used for Finite Element Method to verify the cutting forces for milling Ti-6Al-4 V. The cutting tool forces, stress, strain concentration (s), tool wear, and temperature of the cutting tool with the different geometric shapes are simulated considering Ti-6Al-4 V as work piece material. Finally, the simulated and theoretical values are compared and the optimal design of cutting tool for different sizes are validated. The present approach considers to improve the quality of machining surface and tool life with effects of the various parameters concerning the oblique cutting process namely axial, radial and tangential forces. Various simulated test cases are presented to highlight the approach on optimally designing end mill cutters.

MatteLEKtion : En studie i fem lärares tankar om att använda lek vid matematikundervisning utanför matematikboken

Syftet med min studie var att undersöka hur leken används som verktyg i matematikundervisningen och hur fem lärare ser på lekens roll i den tidiga matematikinlärningen. Jag har även tittat på hur leken har förändrats genom tiderna och tagit del av aktuell forskning som behandlar lek och matematikundervisning.   Jag har kommit fram till att styrd lek används i den tidiga matematik-undervisningen med goda resultat. Däremot finns det ett flertal faktorer att ta hänsyn till där val av läromedel, elevgrupp, lärarens arbetssituation samt tillgång till resurser påverkar hur fördelningen sker mellan bokstyrda matematiklektioner och lektioner utanför matematikboken. Styrd lek som verktyg i matematikundervisningen är överlag mer förekommande i de tidiga åren i skolan men ersätts av laborationer och elektroniska hjälpmedel som till exempel IPad för färdighetsträning allt eftersom eleverna blir äldre. 

Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico

LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.

Examination of stress and strain in glass structures during pressure treatment using FEM simulation and experimental tests

Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau, Dissertation, 2016

Deteção da simulação em indivíduos com e sem diagnóstico de depressão

A simulação consiste na produção voluntária de sintomas físicos e psicológicos para obter compensações externas. O presente estudo tem como objetivo avaliar a eficácia de um conjunto de instrumentos utilizados na identificação de situações de simulação, bem como averiguar se esses instrumentos são sensíveis a sintomas psicopatológicos. Deste modo, espera-se que os resultados obtidos pelos grupos com depressão e sem depressão honestos difiram significativamente dos resultados obtidos pelo grupo sem depressão simulador. Para tal, foi recolhida uma amostra de 59 sujeitos, todos do sexo feminino, divididos por três grupos: com diagnóstico de depressão (n=19), sem diagnóstico de depressão simuladores (n=20) e sem diagnóstico de depressão honestos (n=20). O protocolo de avaliação incluiu o Test of Memory Malingering (TOMM: Tombaugh, 1996), o Structured Inventory Malingered Symptomatology (SIMS: Widows & Smith), os subtestes de Memória de Dígitos e dos Cubos da WAIS-III, (Wechsler, 1997) e a Figura Complexa de Rey (FCR: Rey, 1988). Os resultados não sugerem diferenças significativas no primeiro e segundo ensaios de aprendizagem do TOMM entre os grupos em estudo. No ensaio de retenção, o grupo sem diagnóstico de depressão simulador difere significativamente do grupo sem diagnóstico de depressão honesto. No SIMS, apenas a subescala Psicose (P) difere significativamente entre os grupos com diagnóstico de depressão e sem diagnóstico de depressão simulador. As subescalas Défices Neurológicos (NI), Perturbações Afetivas (AF), P e Perturbações Mnésicas (AM), com exceção da escala Capacidade Intelectual Reduzida (LI) diferem significativamente entre os grupos com diagnóstico de depressão e sem diagnóstico de depressão honesto e entre este e o grupo sem diagnóstico de depressão simulador. No subteste de Memória de Dígitos verifica-se diferenças significativas entre os grupos sem diagnóstico de depressão simulador e honesto. No subteste dos Cubos não foram encontradas diferenças significativas entre os grupos estudados e na cópia da FCR foram encontradas diferenças significativas entre os grupos com diagnóstico de depressão e sem diagnóstico de depressão simulador. Este estudo contribui para o enriquecimento da literatura nacional e internacional, uma vez que inclui um grupo clínico e alguns instrumentos que não são habitualmente utilizados numa avaliação de simulação. Para além disso, estes resultados têm implicações no contexto clínico e forense, no sentido preventivo e de conhecimento da doença mental.

Simulação de sistemas solares passivos usando materiais de mudança de fase (PCMs)

O gradual consumo de energia primária a nível mundial deu origem a uma crise não só ambiental como também económica, proveniente das limitações das reservas energéticas e do fornecimento. Estas inquietações têm levado a um estudo cada vez mais aprofundado no que concerne à eficiência energética de edifícios. É neste contexto que surge o estudo da aplicação dos materiais de mudança de fase (PCM) na térmica dos edifícios. O presente trabalho consiste no estudo da influência da introdução de materiais de mudança de fase no comportamento térmico de um edifício. Foi analisada uma simulação numérica para um sistema solar passivo de ganho direto, por um programa de simulação designado EXTEND™. Efetuou-se, também, o estudo paramétrico de determinadas propriedades associadas aos materiais de mudança de fase. Após a análise, foi testado o impacto, em termos de conforto, da utilização de materiais de mudança de fase em sistemas solares passivos de ganho direto.

Modos projetuais de simulação: uso de ferramentas de simulação térmica no processo projetual de arquitetura

This thesis aims to describe and demonstrate the developed concept to facilitate the use of thermal simulation tools during the building design process. Despite the impact of architectural elements on the performance of buildings, some influential decisions are frequently based solely on qualitative information. Even though such design support is adequate for most decisions, the designer will eventually have doubts concerning the performance of some design decisions. These situations will require some kind of additional knowledge to be properly approached. The concept of designerly ways of simulating focuses on the formulation and solution of design dilemmas, which are doubts about the design that cannot be fully understood nor solved without using quantitative information. The concept intends to combine the power of analysis from computer simulation tools with the capacity of synthesis from architects. Three types of simulation tools are considered: solar analysis, thermal/energy simulation and CFD. Design dilemmas are formulated and framed according to the architect s reflection process about performance aspects. Throughout the thesis, the problem is investigated in three fields: professional, technical and theoretical fields. This approach on distinct parts of the problem aimed to i) characterize different professional categories with regards to their design practice and use of tools, ii) investigate preceding researchers on the use of simulation tools and iii) draw analogies between the proposed concept, and some concepts developed or described in previous works about design theory. The proposed concept was tested in eight design dilemmas extracted from three case studies in the Netherlands. The three investigated processes are houses designed by Dutch architectural firms. Relevant information and criteria from each case study were obtained through interviews and conversations with the involved architects. The practical application, despite its success in the research context, allowed the identification of some applicability limitations of the concept, concerning the architects need to have technical knowledge and the actual evolution stage of simulation tools

Quality balancing for parallel adaptive FEM

We present a dynamic distributed load balancing algorithm for parallel, adaptive finite element simulations using preconditioned conjugate gradient solvers based on domain-decomposition. The load balancer is designed to maintain good partition aspect ratios. It can calculate a balancing flow using different versions of diffusion and a variant of breadth first search. Elements to be migrated are chosen according to a cost function aiming at the optimization of subdomain shapes. We show how to use information from the second step to guide the first. Experimental results using Bramble's preconditioner and comparisons to existing state-ot-the-art load balancers show the benefits of the construction.

Load balancing for parallel adaptive FEM

We present a dynamic distributed load balancing algorithm for parallel, adaptive finite element simulations using preconditioned conjugate gradient solvers based on domain-decomposition. The load balancer is designed to maintain good partition aspect ratios. It calculates a balancing flow using different versions of diffusion and a variant of breadth first search. Elements to be migrated are chosen according to a cost function aiming at the optimization of subdomain shapes. We show how to use information from the second step to guide the first. Experimental results using Bramble's preconditioner and comparisons to existing state-of-the-art balancers show the benefits of the construction.

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Análise da fluência em vigas de concreto armado simplesmente apoiadas usando o método dos elementos finitos

Reinforced concrete creep is a phenomenon of great importance. Despite being appointed as the main cause of several pathologies, its effects are yet considered in a simplified way by the structural designers. In addition to studying the phenomenon in reinforced concrete structures and its current account used in the structural analysis, this paper compares creep strains at simply supported reinforced concrete beams in analytical and in experimental forms with the finite element method (FEM) simulation results. The strains and deflections obtained through the analytical form were calculated with the Brazilian code NBR 6118 (2014) recommendations and the simplified method from CEB-FIP 90 and the experimental results were extracted from tests available in the literature. Finite element simulations are performed using ANSYS Workbench software, using its 3D SOLID 186 elements and the structure symmetry. Analyzes of convergence using 2D PLANE 183 elements are held as well. At the end, it is concluded that FEM analyses are quantitative and qualitative efficient for the estimation of this non-linearity and that the method utilized to obtain the creep coefficients values is sufficiently accurate.