REGROWTH RATES OF AMORPHOUS LAYERS IN SILICON-ON-SAPPHIRE FILMS.

The rate and direction of regrowth of amorphous layers, created by self-implantation, in silicon-on-sapphire (SOS) have been studied using time resolved reflectivity (TRR) experiments performed simultaneously at two wavelengths. Regrowth of an amorphous layer towards the surface was observed in specimens implanted with 3 multiplied by (times) 10**1**5Si** plus /cm**2 at 50keV and regrowth of a buried amorphous layer, from a surface seed towards the sapphire, was observed in specimens implanted with 1 multiplied by (times) 10**1**5Si** plus /cm**2 at 175keV. Rapid isothermal heating to regrow the layers was performed in an electron beam annealing system. The combination of 514. 5nm and 632. 8nm wavelengths was found to be particularly useful for TRR studies since the high absorption in amorphous silicon, at the shorter wavelength, means that the TRR trace is not complicated by reflection from the silicon-sapphire interface until regrowth is nearly complete.

Visualization of turbulent wedges under favourable pressure gradients using both shear-sensitive and temperature-sensitive liquid crystals

Turbulent wedges induced by a 3D surface roughness placed in a laminar boundary layer over a flat plate were visualised for the first time using both shear-sensitive and temperature-sensitive liquid crystals. The experiments were carried out at three different levels of favourable pressure gradients. The purpose of this investigation was to examine the spreading angles of the turbulent wedges indicated by their associated surface shear stresses and heat transfer characteristics and hence obtain further insight about the difference in the behaviour of transitional momentum and thermal boundary layers when a streamwise pressure gradient exists. It was shown that under a zero pressure gradient the spreading angles indicated by the two types of liquid crystals are the same, but the difference increases as the level of favourable pressure gradient increases. The result from the present study could have an important implication to the transition modelling of thermal boundary layers over gas turbine blades.

Deposition of small particles from turbulent flows

This paper deals with particle deposition onto solid walls from turbulent flows. The aim of the study is to model particle deposition in industrial flows, such as the one in gas turbines. The numerical study has been carried out with a two fluid approach. The possible contribution to the deposition from Brownian diffusion, turbulent diffusion and shear-induced lift force are considered in the study. Three types of turbulent two-phase flows have been studied: turbulent channel flow, turbulent flow in a bent duct and turbulent flow in a turbine blade cascade. In the turbulent channel flow case, the numerical results from a two-dimensional code show good agreement with numerical and experimental results from other resources. Deposition problem in a bent duct flow is introduced to study the effect of curvature. Finally, the deposition of small particles on a cascade of turbine blades is simulated. The results show that the current two fluid models are capable of predicting particle deposition rates in complex industrial flows.

Mortality rates estimates for Metapenaeus monoceros (Fabricius) of Maputo Bay

The species Metapenaeus monoceros in Maputo Bay recruits to the fishery almost all over the year, but the main recruitment occurs over a short period of time, each year, during April-May. Growth curves were constructed by following the progression of modes over a period of time. The von Bertalanffy growth parameters were estimated as L∞=31.9 mm and K(monthly)=0.25, for males, and L∞=48.3 mm and K(monthly)=0.14, for females (Brinca and Sousa, 1984). Using data on growth and length composition of the catches, the following methods were applied to estimate mortality rates of M. monoceros: estimation of natural mortality by using approximative methods; use of c.p.u.e. data; catch curves; cohort analysis; average age and length methods.

Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors

The successful utilization of an array of silicon on insulator complementary metal oxide semiconductor (SOICMOS) micro thermal shear stress sensors for flow measurements at macro-scale is demonstrated. The sensors use CMOS aluminum metallization as the sensing material and are embedded in low thermal conductivity silicon oxide membranes. They have been fabricated using a commercial 1 μm SOI-CMOS process and a post-CMOS DRIE back etch. The sensors with two different sizes were evaluated. The small sensors (18.5 ×18.5 μm2 sensing area on 266 × 266 μm2 oxide membrane) have an ultra low power (100 °C temperature rise at 6mW) and a small time constant of only 5.46 μs which corresponds to a cut-off frequency of 122 kHz. The large sensors (130 × 130 μm2 sensing area on 500 × 500 μm2 membrane) have a time constant of 9.82 μs (cut-off frequency of 67.9 kHz). The sensors' performance has proven to be robust under transonic and supersonic flow conditions. Also, they have successfully identified laminar, separated, transitional and turbulent boundary layers in a low speed flow. © 2008 IEEE.

Scalar dissipation and mean reaction rates in premixed turbulent combustion

A general equation for a variance parameter, appearing as a crucial quantity in a simple algebraic expression for the mean chemical rate, is derived. This derivation is based on a flamelet approach to model a turbulent premixed flame, for high but finite values of the Damköhler number. Application of this equation to the case of a planar turbulent flame normal to the oncoming flow of reactants gives good agreement with DNS data corresponding to three different values of the Damköhler number and two values of the heat release parameter. © 2011.

Studies on the occurrence and growth rates of two intertidal fouling bryozoans in the Mattancherry channel of Cochin harbour, south-west coast of India

Occurrence and growth rates of two species of intertidal fouling bryozoans namely Electra bengalensis (Stoliczka) and Electra crustulanta (Pallas) are presented in this paper. The former was a typically marine form, settling on panels only during the high saline conditions of the pre-monsoon period and were absent during the low salinity conditions of the monsoon period, while the latter appeared to be a typical brackish water form settling on panels during the low saline conditions existing during the monsoon and post-monsoon periods and were totally absent during the pre-monsoon months. Regression co-efficient of the former was higher than that of the latter suggesting more pronounced growth in Electra bengalensis. Maximum growth for this species was noticed during March, April and May (pre-monsoon) while for the other species growth was more or less similar during monsoon and post-monsoon months (June-January) showing that the species was at home in oligohaline and mesohaline waters.

DIFFERENT RATES OF MITOCHONDRIAL-DNA SEQUENCE EVOLUTION IN KIRK DIK-DIK (MADOQUA-KIRKII) POPULATIONS

We have investigated evolutionary rates of the mitochondrial genome among individuals of Madoqua kirkii using the relative rate test. Our results demonstrate that individuals of two chromosome races, East African cytotype A and Southwest African cytotype D, evolve about 2.3 times faster than East African cytotype B. Cytogenetic changes, DNA repair efficiency, mutagens, and more likely, hitherto unrecognized factors will account for the rate difference we have observed. Our results suggest additional caution when using molecular clocks in the estimation of divergence time, even within lineages of closely related taxa. Rate heterogeneity in microevolutionary timescales represents a potentially important aspect of basic evolutionary processes and may provide additional insights into factors which affect genome evolution. (C) 1995 Academic Press, Inc.

The effect of various protein levels on the growth and survival rates of Penaeus monodon Fabricius

Postlarvae of tiger prawns, P. monodon , were fed with various protein levels of 0; 30; 40 and 50%, fish meal and rice bran were combined and pelletized for 16 wks. Prawns used had an average mean length of 1.2 mm and an average mean weight of 5.5 mg. Nitrite, ammonia, dissolved oxygen content, temperature and pH were monitored. After one month of feeding, growth increments of postlarvae fed with 30% protein diet were significantly different from those given 0; 40 and 50%. Survival rate of the group fed 40% protein was higher (81.7%) but was not significantly different from those fed 30% (68.0%). The highest feed efficiency was obtained from the 30% protein pellets (4.6). At the end of 16 weeks, growth increment of 40% protein level was significantly different from the 30% and 50% protein levels, but the survival rate was not signficantly different from the 30% protein level. Feed conversion for the 40% protein diet was 2.8.

Survival rates of different postlarval stages of Penaeus monodon Fabricius

The objective of this study is to determine survival rates of different postlarval stages upon stocking in the Leganes ponds. Twelve 3m x 2m x 2m suspension nets made of nylon cloth (mesh size = 0 . 1 mm) were set up in a Leganes Station pond (ave. water depth = 1 m) by means of 3-m long poles stacked at distances approximating the area of each net. The net bottom was filled with topsoil at least 15 cm thick to stimulate the pond bottom. At least 60 cm of the upper edge of each net was above the water level to prevent mixing of water inside and outside the net. P.monodon of stages P SUB-11 , P SUB-15 , P SUB-21 (from the hatchery) and P SUB-25 (from the wet lab) were stocked in the nets at 200/sq m or 1,200 fry/net. Due to lack of fry, only one P SUB-25 net was stocked. Each net had two large dried miapi branches as shelter from predation and cannibalism for the young sugpo fry. Fresh lablab was fed at the rate of one pail (approximately 5 kg) every four days per net. Harvest data show relatively higher survival rates for P SUB-15 and P SUB-18 compared to P SUB-11 and P SUB-25 with no significant difference between these two stages. The results for P SUB-25 may not be valid because the stock came from the wet lab in comparison to the other postlarval stages which were reared in the hatchery. Moreover, the P SUB-25 stock had no replicates and the net itself (no. 10) was discovered to have many holes. These preliminary results point to P SUB-15 as the best stage for harvest from the hatchery in terms of high pond recovery and lesser expense in rearing compared to older postlarvae.

Studies on the egg quality of Penaeus monodon Fabricius based on morphology and hatching rates

Eggs of P. monodon are classified into 5 different types on the basis of morphological criteria and hatching rates: A sub(1) eggs, which undergo normal development with 58% hatching rate; A sub(2) eggs, which show delayed and/or abnormal development with 32% hatching rate; B eggs, which are unfertilized and characterized by irregular cytoplasmic formation; C eggs, which are unfertilized and show no change in appearance; and D eggs, which are unfertilized and show extensive bacterial presence. The establishment of a highly linear relationship between percent A sub(1) eggs and hatching rate provides a useful tool to aid the hatchery technician in determining which spawnings to reject outright and which to rear through the larval and post-larval stages.

Growth and survival rates of hatchery-produced and wild milkfish fry grown to fingerling size in earthen nursery ponds

Growth and survival rates of hatchery-produced and wild milkfish (Chanos chanos ) fry grown to fingerling size were compared. Data show no significant difference between the 2 fry. At a recommended stocking density of 30 fry/m super(2), hatchery-produced milkfish fry could attain fingerling size of almost 2g with a survival of 68%. The study indicates that hatchery-produced fry/fingerlings can equal the culture performance of the wild fry. Comparative performance of hatchery-bred and wild fry should encourage intensified research on milkfish broodstock development and refinement of induced spawning methods.

The effect of various protein levels on the growth and survival rates of Penaeus monodon Fabricius

Postlarvae of tiger prawns, P. monodon, were fed with various protein levels of 0; 30; 40 and 50%, fish meal and rice bran were combined and pelletized for 16 wks. Prawns used had an average mean length of 1.2 mm and an average mean weight of 5.5 mg. Nitrite, ammonia, dissolved oxygen content, temperature and pH were monitored. After one month of feeding, growth increments of postlarvae fed with 30% protein diet were significantly different from those given 0; 40 and 50%. Survival rate of the group fed 40% protein was higher (81.7%) but was not significantly different from those fed 30% (68.0%). The highest feed efficiency was obtained from the 30% protein pellets (4.6). At the end of 16 weeks, growth increment of 40% protein level was significantly different from the 30% and 50% protein levels, but the survival rate was not significantly different from the 30% protein level. Feed conversion for the 40% protein diet was 2.8.