982 resultados para Setting characteristics
Resumo:
Orientation: Research that considers the effects of individual characteristics and job characteristics jointly in burnout is necessary, especially when one considers the possibility of curvilinear relationships between job characteristics and burnout. Research purpose: This study examines the contribution of sense of coherence (SOC) and job characteristics to predicting burnout by considering direct and moderating effects. Motivation for this study: Understanding the relationships of individual and job characteristics with burnout is necessary for preventing burnout. It also informs the design of interventions. Research design, approach and method: The participants were 632 working adults (57% female) in South Africa. The measures included the Job Content Questionnaire, the Sense of Coherence Questionnaire and the Maslach Burnout Inventory. The authors analysed the data using hierarchical multiple regression with the enter method. Main findings: Job characteristics and SOC show the expected direct effects on burnout. SOC has a direct negative effect on burnout. Job demands and supervisor social support show nonlinear relationships with burnout. SOC moderates the effect of demands on burnout and has a protective function so that the demands-burnout relationship differs for those with high and low SOC. Practical/managerial implications: The types of effects, the shape of the stressor-strain relationship and the different contributions of individual and job characteristics have implications for designing interventions. Contribution/value add: SOC functions differently when combined with demands, control and support. These different effects suggest that it is not merely the presence or absence of a job characteristic that is important for well-being outcomes but how people respond to its presence or absence.
Resumo:
Wet pavement friction is known to be one of the most important roadway safety parameters. In this research, frictional properties of flexible (asphalt) pavements were investigated. As a part of this study, a laboratory device to polish asphalt specimens was refined and a procedure to evaluate mixture frictional properties was proposed. Following this procedure, 46 different Superpave mixtures, one stone matrix asphalt (SMA) mixture and one porous friction course (PFC) mixture were tested. In addition, 23 different asphalt and two concrete field sections were also tested for friction and noise. The results of both field and laboratory measurements were used to develop an International Friction Index (IFI)-based protocol for measurement of the frictional characteristics of asphalt pavements for laboratory friction measurements. Based on the results of the study, it appears the content of high friction aggregate should be 20% or more of the total aggregate blend when used with other, polish susceptible coarse aggregates; the frictional properties increased substantially as the friction aggregate content increased above 20%. Both steel slag and quartzite were found to improve the frictional properties of the blend, though steel slag had a lower polishing rate. In general, mixes containing soft limestone demonstrated lower friction values than comparable mixes with hard limestone or dolomite. Larger nominal maximum aggregate size mixes had better overall frictional performance than smaller sized mixes. In addition, mixes with higher fineness moduli generally had higher macrotexture and friction.
Resumo:
Iowa state, county, and city engineering offices expend considerable effort monitoring the state’s approximately 25,000 bridges, most of which span small waterways. In fact, the need for monitoring is actually greater for bridges over small waterways because scour processes are exacerbated by the close proximity of abutments, piers, channel banks, approach embankments, and other local obstructions. The bridges are customarily inspected biennially by the county’s road department bridge inspectors. It is extremely time consuming and difficult to obtain consistent, reliable, and timely information on bridge-waterway conditions for so many bridges. Moreover, the current approaches to gather survey information is not uniform, complete, and quantitative. The methodology and associated software (DIGIMAP) developed through the present project enable a non-intrusive means to conduct fast, efficient, and accurate inspection of the waterways in the vicinity of the bridges and culverts using one technique. The technique combines algorithms image of registration and velocimetry using images acquired with conventional devices at the inspection site. The comparison of the current bridge inspection and monitoring methods with the DIGIMAP methodology enables to conclude that the new procedure assembles quantitative information on the waterway hydrodynamic and morphologic features with considerable reduced effort, time, and cost. It also improves the safety of the bridge and culvert inspections conducted during normal and extreme hydrologic events. The data and information are recorded in a digital format, enabling immediate and convenient tracking of the waterway changes over short or long time intervals.
Resumo:
Understanding the influence of pore space characteristics on the hydraulic conductivity and spectral induced polarization (SIP) response is critical for establishing relationships between the electrical and hydrological properties of surficial sedimentary deposits. Here, we present the results of laboratory SIP measurements on saturated quartz samples with granulometric characteristics ranging from fine sand to fine gravel. We alter the pore characteristics using three principal methods: (i) variation of the grain sizes, (ii) changing the degree of compaction, and (iii) changing the level of sorting. We then examine how these changes affect both the SIP response and the hydraulic conductivity. In general, the results indicate a clear connection between the applied changes in pore characteristics and the SIP response. In particular, we observe a systematic correlation between the hydraulic conductivity and the relaxation time of the Cole-Cole model describing the observed SIP effect for the whole range of considered grain sizes.
Resumo:
The present study is an integral part of a broader study focused on the design and implementation of self-cleaning culverts, i.e., configurations that prevent the formation of sediment deposits after culvert construction or cleaning. Sediment deposition at culverts is influenced by many factors, including the size and characteristics of material of which the channel is composed, the hydraulic characteristics generated under different hydrology events, the culvert geometry design, channel transition design, and the vegetation around the channel. The multitude of combinations produced by this set of variables makes the investigation of practical situations a complex undertaking. In addition to the considerations above, the field and analytical observations have revealed flow complexities affecting the flow and sediment transport through culverts that further increase the dimensions of the investigation. The flow complexities investigated in this study entail: flow non-uniformity in the areas of transition to and from the culvert, flow unsteadiness due to the flood wave propagation through the channel, and the asynchronous correlation between the flow and sediment hydrographs resulting from storm events. To date, the literature contains no systematic studies on sediment transport through multi-box culverts or investigations on the adverse effects of sediment deposition at culverts. Moreover, there is limited knowledge about the non-uniform, unsteady sediment transport in channels of variable geometry. Furthermore, there are few readily useable (inexpensive and practical) numerical models that can reliably simulate flow and sediment transport in such complex situations. Given the current state of knowledge, the main goal of the present study is to investigate the above flow complexities in order to provide the needed insights for a series of ongoing culvert studies. The research was phased so that field observations were conducted first to understand the culvert behavior in Iowa landscape. Modeling through complementary hydraulic model and numerical experiments was subsequently carried out to gain the practical knowledge for the development of the self-cleaning culvert designs.
Resumo:
BACKGROUND: The long-term outcome of antiretroviral therapy (ART) is not assessed in controlled trials. We aimed to analyse trends in the population effectiveness of ART in the Swiss HIV Cohort Study over the last decade. METHODS: We analysed the odds of stably suppressed viral load (ssVL: three consecutive values <50 HIV-1 RNA copies/mL) and of CD4 cell count exceeding 500 cells/μL for each year between 2000 and 2008 in three scenarios: an open cohort; a closed cohort ignoring the influx of new participants after 2000; and a worst-case closed cohort retaining lost or dead patients as virological failures in subsequent years. We used generalized estimating equations with sex, age, risk, non-White ethnicity and era of starting combination ART (cART) as fixed co-factors. Time-updated co-factors included type of ART regimen, number of new drugs and adherence to therapy. RESULTS: The open cohort included 9802 individuals (median age 38 years; 31% female). From 2000 to 2008, the proportion of participants with ssVL increased from 37 to 64% [adjusted odds ratio (OR) per year 1.16 (95% CI 1.15-1.17)] and the proportion with CD4 count >500 cells/μL increased from 40 to >50% [OR 1.07 (95% CI 1.06-1.07)]. Similar trends were seen in the two closed cohorts. Adjustment did not substantially affect time trends. CONCLUSIONS: There was no relevant dilution effect through new participants entering the open clinical cohort, and the increase in virological/immunological success over time was not an artefact of the study design of open cohorts. This can partly be explained by new treatment options and other improvements in medical care.
Resumo:
Objectives: To determine the prevalence of dementia and the proportion of undiagnosed dementia in elderly patients admitted to postacute care, and to identify patients' characteristics associated with undiagnosed dementia. Design: Cross-sectional study. Setting: Academic postacute rehabilitation facility in Lausanne, Switzerland. Participants: Patients (N = 1764) aged 70 years and older. Measurements: Data on socio-demographic, medical, functional, and affective status were collected upon admission. Data on cognitive performance (Mini-Mental State Exam [MMSE]), and cognition-related discharge diagnoses were abstracted through a structured review of discharge summaries. Results: Overall, 24.1% (425/1764) patients had a diagnosis of dementia, most frequently secondary to Alzheimer's disease (260/425, 61.2%). Among dementia cases, 70.8% (301/425) were newly diagnosed during postacute stay. This proportion was lower among patients referred from internal medicine than from orthopedic/surgery services (65.8% versus 74.8%, P = .042). Compared to patients with already diagnosed dementia, those newly diagnosed were older, lived alone more frequently, and had better functional status and MMSE score at admission (all P < .05). In multivariate analysis, previously undetected dementia remained associated with older age (OR = 2.4 for age 85 years and older, 95% CI 1.5-4.0, P = .001) and normal MMSE at admission (OR = 5.9, 95% CI 2.7-12.7, P < .001). Conclusion: Dementia was present in almost a fourth of elderly patients referred to postacute care, but was diagnosed in less than a third before admission. Oldest old patients appear especially at risk for underrecognition. These results emphasize the high diagnostic yield of systematic cognitive assessment in the postacute care setting to improve these patients' management and quality of life.
Resumo:
OBJECTIVE: To examine characteristics associated with functional recovery in older patients undergoing postacute rehabilitation. DESIGN: Observational study. SETTING: Postacute rehabilitation facility. PARTICIPANTS: Patients (N=2754) aged ≥65 years admitted over a 4-year period. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURE: Functional status was assessed at admission and again at discharge. Functional recovery was defined as achieving at least 30% improvement on the Barthel Index score from admission compared with the maximum possible room for improvement. RESULTS: Patients who achieved functional recovery (70.3%) were younger and were more likely to be women, live alone, and be without any formal home care before admission, and they had fewer chronic diseases (all P<.01). They also had better cognitive status and a higher Barthel Index score both at admission (mean ± SD, 63.3±18.0 vs 59.6±24.7) and at discharge (mean ± SD, 86.8±10.4 vs 62.2±22.9) (all P<.001). In multivariate analysis, patients <75 years of age (adjusted odds ratio [OR]=1.51; 95% confidence interval [CI], 1.16-1.98; P=.003), women (adjusted OR=1.24; 95% CI, 1.01-1.52; P=.045), patients living alone (adjusted OR=1.61; 95% CI, 1.31-1.98; P<.001), and patients without in-home help prior to admission (adjusted OR=1.39; 95% CI, 1.15-1.69; P=.001) remained at increased odds of functional recovery. In addition, compared with those with moderate-to-severe cognitive impairment (Mini-Mental State Examination score <18), patients with mild-to-moderate impairment (Mini-Mental State Examination score 19-23) and those cognitively intact also had increased odds of functional recovery (adjusted OR=1.56; 95% CI, 1.13-2.15; P=.007; adjusted OR=2.21; 95% CI, 1.67-2.93; P<.001, respectively). CONCLUSIONS: Apart from sociodemographic characteristics, cognition is the strongest factor that identifies older patients more likely to improve during postacute rehabilitation. Further study needs to determine how to best adapt rehabilitation processes to better meet the specific needs of this population and optimize their outcome.
Resumo:
Exposure to PM10 and PM2.5 (particulate matter with aerodynamic diameter smaller than 10 μm and 2.5 μm, respectively) is associated with a range of adverse health effects, including cancer, pulmonary and cardiovascular diseases. Surface characteristics (chemical reactivity, surface area) are considered of prime importance to understand the mechanisms which lead to harmful effects. A hypothetical mechanism to explain these adverse effects is the ability of components (organics, metal ions) adsorbed on these particles to generate Reactive Oxygen Species (ROS), and thereby to cause oxidative stress in biological systems (Donaldson et al., 2003). ROS can attack almost any cellular structure, like DNA or cellular membrane, leading to the formation of a wide variety of degradation products which can be used as a biomarker of oxidative stress. The aim of the present research project is to test whether there is a correlation between the exposure to Diesel Exhaust Particulate (DEP) and the oxidative stress status. For that purpose, a survey has been conducted in real occupational situations where workers were exposed to DEP (bus depots). Different exposure variables have been considered: - particulate number, size distribution and surface area (SMPS); - particulate mass - PM2.5 and PM4 (gravimetry); - elemental and organic carbon (coulometry); - total adsorbed heavy metals - iron, copper, manganese (atomic adsorption); - surface functional groups present on aerosols (Knudsen flow reactor). Several biomarkers of oxidative stress (8-hydroxy-2'-deoxyguanosine and several aldehydes) have been determined either in urine or serum of volunteers. Results obtained during the sampling campaign in several bus depots indicated that the occupational exposure to particulates in these places was rather low (40-50 μg/m3 for PM4). Bimodal size distributions were generally observed (5 μm and <1 μm). Surface characteristics of PM4 varied strongly, depending on the bus depot. They were usually characterized by high carbonyl and low acidic sites content. Among the different biomarkers which have been analyzed within the framework of this study, mean urinary levels of 8-hydroxy-2'-deoxyguanosine increased significantly (p<0.05) during two consecutive days of exposure for non-smoker workers. On the other hand, no statistically significant differences were observed for serum levels of hexanal, nonanal and 4- hydroxy-nonenal (p>0.05). Biomarkers levels will be compared to exposure variables to gain a better understanding of the relation between the particulate characteristics and the formation of ROS by-products. This project is financed by the Swiss State Secretariat for Education and Research. It is conducted within the framework of the COST Action 633 "Particulate Matter - Properties Related to Health Effects".
Resumo:
OBJECTIVE: To compare interval breast cancer rates (ICR) between a biennial organized screening programme in Norway and annual opportunistic screening in North Carolina (NC) for different conceptualizations of interval cancer. SETTING: Two regions with different screening practices and performance. METHODS: 620,145 subsequent screens (1996-2002) performed in women aged 50-69 and 1280 interval cancers were analysed. Various definitions and quantification methods for interval cancers were compared. RESULTS: ICR for one year follow-up were lower in Norway compared with NC both when the rate was based on all screens (0.54 versus 1.29 per 1000 screens), negative final assessments (0.54 versus 1.29 per 1000 screens), and negative screening assessments (0.53 versus 1.28 per 1000 screens). The rate of ductal carcinoma in situ was significantly lower in Norway than in NC for cases diagnosed in both the first and second year after screening. The distributions of histopathological tumour size and lymph node involvement in invasive cases did not differ between the two regions for interval cancers diagnosed during the first year after screening. In contrast, in the second year after screening, tumour characteristics remained stable in Norway but became prognostically more favorable in NC. CONCLUSION: Even when applying a common set of definitions of interval cancer, the ICR was lower in Norway than in NC. Different definitions of interval cancer did not influence the ICR within Norway or NC. Organization of screening and screening performance might be major contributors to the differences in ICR between Norway and NC.
Resumo:
En este trabajo se expone e ilustra un modelo teórico para entender las funciones de la identidad, así como los mecanismospsicosociales asociados a su construcción: “Modelo Evolutivo y Funcional de la Identidad Mediada” (MEBIM). La identidad, mediada narrativamente, cumple una función personal orientada a la dirección de la propia vida, así como una función sociocultural vinculada a la búsqueda de reconocimiento de los derechos de los grupos sociales a los que uno se siente apegado. Se ilustran los factores asociados a la construcción de la identidad personal (sí mismos posibles, transiciones vitales, vínculo afectivo) y sociocultural (acción-transformación e identificación simbólica) a partir de 12 historias de vida realizadas con mestizos e indígenasde la Universidad Intercultural de Chiapas (México). Se sugiere que en contextos educativos formales, como la escuela o la Universidad, se deben propiciar narrativas personales y socioculturales con el objetivo de optimizar la identidad en un mundo a la vez globalizado y plural
Resumo:
At present, there is little fundamental guidance available to assist contractors in choosing when to schedule saw cuts on joints. To conduct pavement finishing and sawing activities effectively, however, contractors need to know when a concrete mixture is going to reach initial set, or when the sawing window will open. Previous research investigated the use of the ultrasonic pulse velocity (UPV) method to predict the saw-cutting window for early entry sawing. The results indicated that the method has the potential to provide effective guidance to contractors as to when to conduct early entry sawing. The aim of this project was to conduct similar work to observe the correlation between initial setting and conventional sawing time. Sixteen construction sites were visited in Minnesota and Missouri over a two-year period. At each site, initial set was determined using a p-wave propagation technique with a commercial device. Calorimetric data were collected using a commercial semi-adiabatic device at a majority of the sites. Concrete samples were collected in front of the paver and tested using both methods with equipment that was set up next to the pavement during paving. The data collected revealed that the UPV method looks promising for early entry and conventional sawing in the field, both early entry and conventional sawing times can be predicted for the range of mixtures tested.
Resumo:
Objectives: To evaluate the prevalence of dental agenesis and its possible association with other developmental dental anomalies and systemic entities. Setting and Sample Population: Descriptive transversal study, for which 1518 clinical records, of patients visited by the Odontological Service of the Primary Health Centre of Cassà de la Selva (Girona-Spain) between December 2002 and February 2006 were reviewed. The data were recorded in relation to the oral and dental anomalies and the associated systemic entities, between the ones referred as concomitant in literature. Results: Values of 9.48% (7.25% excluding the third molars) for dental agenesis and 0.39% for oligodontia were obtained. The presence of dental agenesis concomitant with some other forms of oral and dental anomalies was observed. Attention must be drawn to the fact that a greater number of concomitant systemic entities were observed in those patients that presented a severe phenotypical pattern of dental agenesis. Conclusions: The results of the present study do not differ from the ones reported in studies of similar characteristics among Occidental and Spanish populations. The relationship observed between certain systemic entities and developmental dental anomalies suggest a possible common genetic etiology