The Debate on First Nations Education Funding: Mind the Gap (Working Paper 49)

It is at long last becoming part of the public discourse that improving living conditions and opportunities for First Nations communities in Canada is a national imperative. It is also widely recognized that the education is critical to fostering a better future for First Nations people. Yet, for many First Nations youth, particularly those on reserve, completing even high school is well beyond reach. The graduation rate of First Nations people living on reserve was 35.3 per cent as recently as 2011 compared with 78 per cent for the population as a whole. At the same time, the First Nations population is young and growing fast - in First Nations communities 49 per cent of the population is under 24 years of age compared to 30 per cent of the general population. Despite some incremental improvements in education success rates for First Nations students in recent years, the education gap between First Nations and the rest of the country is increasing. The concerns expressed in the 2011 Auditor General report continue to hold weight: "In 2004, we noted that at existing rates, it would take 28 years for First Nations communities to reach the national average. More recent trends suggest that the time needed may still be longer.

Labour and Low Energy Buildings: the energy performance gap as Social Practice

Buildings are responsible for approximately 30% of EU end-use emissions (Bettgenhäuser , et al, 2009) and are at the forefront of efforts to meet emissions targets arising from their design, construction and operation. For the first time in its history, construction industry outputs must meet specific energy targets if planned reductions in greenhouse gas emissions are to be achieved through nearly zero energy buildings (nZEB) (EC, 2010) supported by on-site renewable heat and power. Where individual UK dwellings have been tested before occupation to assess whether they meet energy design criteria, the results indicate what is described as an ‘energy performance gap’, that is, energy use is almost always more than that specified. This leads to the conclusion that the performance gap is, inter alia, a function of the labour process and thus a function of social practice. Social practice theory, based on Schatzki’s model (2002), is utilised to explore the performance gap as a result of the changes demanded in the social practice of building initiated by new energy efficiency rules. The paper aims to open a discussion where failure in technical performance is addressed as a social phenomenon.

NEIGHBORHOOD PERCEPTION OF SAFETY AND THE MOBILITY GAP BETWEEN MEN AND WOMEN IN OLD AGE

Background and Objectives: Mobility limitations are a prevalent issue in older adult populations, and an important determinant of disability and mortality. Neighborhood conditions are key determinants of mobility and perception of safety may be one such determinant. Women have more mobility limitations than men, a phenomenon known as the gender mobility gap. The objective of this work was to validate a measure of perception of safety, examine the relationship between neighborhood perception of safety and mobility limitations in seniors, and explore if these effects vary by gender. Methods: This study was cross-sectional, using questionnaire data collected from community-dwelling older adults from four sites in Canada, Colombia, and Brazil. The exposure variable was the neighborhood aggregated Perception of Safety (PoS) scale, derived from the Physical and Social Disorder (PSD) scale by Sampson and Raudenbush. Its construct validity was verified using factor analyses and correlation with similar measures. The Mobility Assessment Tool – short form (MAT-sf), a video-based measure validated cross-culturally in the studied populations, was used to assess mobility limitations. Based on theoretical models, covariates were included in the analysis, both at the neighborhood level (SES, social capital, and built environment) and the individual level (age, gender, education, income, chronic illnesses, depression, cognitive function, BMI, and social participation). Multilevel modeling was used in order to account for neighborhood clustering. Gender specific analyses were carried out. SAS and M-plus were used in this study. Results: PoS was validated across all sites. It loaded in a single factor, after excluding two items, with a Cronbach α value of approximately 0.86. Mobility limitations were present in 22.08% of the sample, 16.32% among men and 27.41% among women. Neighborhood perception of safety was significantly associated with mobility limitations when controlling for all covariates, with an OR of 0.84 (CI 95%: 0.73-0.96), indicating lower odds of having mobility limitations as neighborhood perception of safety improves. Gender did not affect this relationship despite women being more likely to have mobility limitations and live in neighborhoods with poor perception of safety. Conclusion: Neighborhood perception of safety affected the prevalence of mobility limitations in older adults in the studied population.

Calcium-rich gap transients: Tidal detonations of white dwarfs?

We hypothesize that at least some of the recently discovered class of calcium-rich gap transients are tidal detonation events of white dwarfs (WDs) by black holes (BHs) or possibly neutron stars. We show that the properties of the calcium-rich gap transients agree well with the predictions of the tidal detonation model. Under the predictions of this model, we use a follow-up X-ray observation of one of these transients, SN 2012hn, to place weak upper limits on the detonator mass of this system that include all intermediate-mass BHs (IMBHs). As these transients are preferentially in the stellar haloes of galaxies, we discuss the possibility that these transients are tidal detonations of WDs caused by random flyby encounters with IMBHs in dwarf galaxies or globular clusters. This possibility has been already suggested in the literature but without connection to the calcium-rich gap transients. In order for the random flyby cross-section to be high enough, these events would have to be occurring inside these dense stellar associations. However, there is a lack of evidence for IMBHs in these systems, and recent observations have ruled out all but the very faintest dwarf galaxies and globular clusters for a few of these transients. Another possibility is that these are tidal detonations caused by three-body interactions, where a WD is perturbed towards the detonator in isolated multiple star systems. We highlight a number of ways this could occur, even in lower mass systems with stellar-mass BHs or neutron stars. Finally, we outline several new observational tests of this scenario, which are feasible with current instrumentation.

Modeling and simulation of bulk gallium nitride power semiconductor devices

Bulk gallium nitride (GaN) power semiconductor devices are gaining significant interest in recent years, creating the need for technology computer aided design (TCAD) simulation to accurately model and optimize these devices. This paper comprehensively reviews and compares different GaN physical models and model parameters in the literature, and discusses the appropriate selection of these models and parameters for TCAD simulation. 2-D drift-diffusion semi-classical simulation is carried out for 2.6 kV and 3.7 kV bulk GaN vertical PN diodes. The simulated forward current-voltage and reverse breakdown characteristics are in good agreement with the measurement data even over a wide temperature range.

Bridging the Gap: Developing a Palliative Approach to Care for Young Adults with Life Limiting Conditions

Bridging the Gap: Developing a Palliative Approach to Care for Young Adults with Life Limiting Conditions

More young adults (YAs) with life limiting conditions (LLC) are surviving into adulthood as earlier diagnosis and improved medical management in pediatric care lead to higher rates of survival for cancer, congenital heart and neuromuscular conditions. When these YAs leave pediatric care, they leave behind comprehensive and coordinated health, social and education services for uncoordinated adult systems, with limited access to palliative services they received in pediatric care.

YAs with LLCs will benefit from a public health palliative approach to care. This approach better matches their chronic disease trajectories of a series of declining plateaus over a period of months to years, punctuated by unpredictable periodic crises. Public health palliative care is a blended provision of health care and community services based on evidence that health care is most effective and least expensive when offered in conjunction with a complement of services that reflects social determinants of health and well-being. For YAs with LLCs, these resources will support their health, social, vocational, independent living, and educational goals to maximize their opportunities in an abbreviated time frame.


The objectives of this workshop are to:

1. Provide an overview of the young adult population with palliative care needs.
2. Discuss current care of this population.
3. Highlight results from three recent projects to examine and address needs of this population.
4. Dialogue with audience about other programs, initiatives, or ideas to address the needs of this population.

We look forward to robust conversations and ideas from your practice and research.

A Frequency-Dependent Equivalence Between Groove Gap Waveguide and Rectangular Waveguide

Recently gap waveguides have been shown as a potential alternative to conventional waveguides in the millimeter-wave band. Groove Gap Waveguide (GGW) has until now been studied though direct correspondence with rectangular waveguide with the same propagation channel dimensions. However there have been observed differences in the above cutoff propagation characteristics between these waveguide types. Furthermore, the behaviour of GGW below cutoff remains unknown. This work presents a discussion of below and above cutoff propagation characteristics, and introduces a simple model that explains observed GGW behavior and establishes its propagation characteristics.

Addressing the theory practice gap in nurse education: evaluating teaching through audit against NMC standards and final management placement

Introduction
This paper outlines an innovative approach to auditing and evaluating the content of a management and leadership module for undergraduate nursing students after their final management clinical placement. Normally evaluations of teaching in a module take place at the end of a teaching module and therefore do not properly reflect the value of the teaching in relation to practical clinical experience.
Aim
This audit and evaluation sought to explore both the practical value of the teaching and learning, and also the degree to which it the teaching reflected against the NMC Standards of Education and Learning (2010 domain 3).
Methods
Having piloted the evaluative tool with an earlier cohort of nursing students, this evaluation explored both a quantitative assessment employing a Personal Response System (n =172), together with a qualitative dimension (n=116), thus delivering paper-based comments and reflections from students on the value and practicality of the module teaching theory to their final clinical management experience. The quantitative audit data were analysed for frequencies and cross tabulation and the qualitative audit data were thematically analysed.
Results
Results suggest a significant proportion of the students, appreciated the quality of the standard of teaching, but more importantly, ‘valued or highly valued’ the teaching and learning in relation to how it helped to significantly inform their management placement experience. A smaller proportion of the students underlined limitations and areas in which further improvement can be made in teaching and learning to the module.
Conclusion
Significantly positive evaluation by the students of the practical value of teaching and learning, to the theoretical management module. This has proved a useful auditing approach in assessing the theoretical teaching to student’s Level 3 clinical experience, and facilitated significant recommendations as far as developing the teaching and learning to better reflect the practice needs of nursing students

A Gap with a Deficit of Large Grains in the Protoplanetary Disk around TW Hya

We report 3 au resolution imaging observations of the protoplanetary disk aroundTW Hya at 145 and 233 GHz with the Atacama Large Millimeter/Submillimeter Array.Our observations revealed two deep gaps (~25-50 %) at 22 and 37 au and shallowergaps (a few %) at 6, 28, and 44 au, as recently reported by Andrews et al. (2016). Thecentral hole with a radius of  3 au was also marginally resolved. The most remarkablefinding is that the spectral index α(R) between bands 4 and 6 peaks at the 22 au gap.The derived power-law index of the dust opacity β(R) is  ~1.7 at the 22 au gap anddecreases toward the disk center to ~0. The most prominent gap at 22 au could becaused by the gravitational interaction between the disk and an unseen planet with amass of ≲1.5 MNeptune although other origins may be possible. The planet-induced gap is supported by the fact that β(R) is enhanced at the 22 au gap, indicating a deficitof mm-sized grains within the gap due to dust filtration by a planet.

Few-layer, large-area, 2D covalent organic framework semiconductor thin films.

In this work, we synthesize large-area thin films of a conjugated, imine-based, two-dimensional covalent organic framework at the solution/air interface. Thicknesses between ∼2-200 nm are achieved. Films can be transferred to any desired substrate by lifting from underneath, enabling their use as the semiconducting active layer in field-effect transistors.

Effect of II‐VI Semiconductor Nanomaterials and Electron Irradiation on Polystyrene (PS) & Poly(ethylene‐co‐vinyl acetate) (EVA)

Organic-inorganic nanocomposites combine unique properties of both the constituents in one material. Among this group of materials, clay based as well as ZnO, TiO2 nanocomposites have been found to have diverse applications. Optoelectronic devices require polymerinorganic systems to meet certain desired properties. Dielectric properties of conventional polymers like poly(ethylene-co-vinyl acetate) (EVA) and polystyrene (PS) may also be tailor tuned with the incorporation of inorganic fillers in very small amounts. Electrical conductivity and surface resistivity of polymer matrices are found to improve with inorganic nanofillers. II-VI semiconductors and their nano materials have attracted material scientists because of their unique optical properties of photoluminescence, UV photodetection and light induced conductivity. Cadmium selenide (CdSe), zinc selenide (ZnSe) and zinc oxide (ZnO) are some of the most promising members of the IIVI semiconductor family, used in light-emitting diodes, nanosensors, non-linear optical (NLO) absorption etc. EVA and PS materials were selected as the matrices in the present study because they are commercially used polymers and have not been the subject of research for opto-electronic properties with semiconductor nanomaterials

SUPPLIER INVOLVEMENT IN NEW PRODUCT DEVELOPMENT: A CASE STUDY FROM THE SEMICONDUCTOR INDUSTRY

Global competition requires that the companies adapt themselves to technological changes rapidly, develop new products, reduce the cost, shorten the time to market, and increase the quality. In this context, supplier involvement in New Product Development (NPD) is determinant for a company to respond to the requirements of the increasingly dynamic markets. The main purpose of the paper is to demonstrate the importance of supplier involvement in NPD, buyer-supplier relationships and their effects on buyer’s NPD process, highlighting the benefits of supplier involvement, the barriers, the strategic aspects and industry aspects. These issues are addressed with a case study from the semiconductor industry. Besides helping to understand NPD in the semiconductor industry, the contribution and fi ndings of this work are clear: the results achieved confirm the findings of studies referred in the literature review, and confirm that the semiconductor industry sector requires a closer and more complex relationship structure with suppliers, given the specificities and challenges of the sector, such as rapid technological changes, permanent innovation, global competition, reduction of cost and time-to-market cycle, increased capacity, among other. The main contribution of the paper to the scientific literature and to managers is the better understanding of the buyer-supplier relationships in NPD in the semiconductor industry.

Accessibility Instruments In Planning Practice: Bridging The Implementation Gap

Accessibility concepts are increasingly acknowledged as fundamental to understand cities and urban regions. Accordingly, accessibility instruments have been recognised as valuable support tools for land-use and transport planning. However, despite the relatively large number of instruments available in the literature, they are not widely used in planning practice. This paper aims to explore why accessibility instruments are not widely used in planning practice. To this end, we focus our research on perceived user-friendliness and usefulness of accessibility instruments. First, we surveyed some instrument developers, providing an overview of the characteristics of accessibility instruments available and on developers’ perceptions of their user-friendliness in planning practice. Second, we brought together developers and planning practitioners in some local workshops across Europe and Australia, where participants were asked to use insights provided by accessibility instruments for the development of planning strategies. We found that most practitioners are convinced of the usefulness of accessibility instruments in planning practice, as they generate new and relevant insights for planners. Findings suggest that not only user-friendliness problems but mainly organisational barriers and lack of institutionalisation of accessibility instruments, are the main causes of the implementation gap. Thus user-friendliness improvement may provide limited contributions to the successful implementation of accessibility concepts in planning practice. In fact, there seems to be more to gain from the active and continued engagement of instrument developers with planning practitioners and the institutionalisation of accessibility planning.

Wavelength converters based on four-wave mixing in semiconductor optical amplifiers for advanced modulation formats

Les convertisseurs de longueur d’onde sont essentiels pour la réalisation de réseaux de communications optiques à routage en longueur d’onde. Dans la littérature, les convertisseurs de longueur d’onde basés sur le mélange à quatre ondes dans les amplificateurs optiques à semi-conducteur constituent une solution extrêmement intéressante, et ce, en raison de leurs nombreuses caractéristiques nécessaires à l’implémentation de tels réseaux de communications. Avec l’émergence des systèmes commerciaux de détection cohérente, ainsi qu’avec les récentes avancées dans le domaine du traitement de signal numérique, il est impératif d’évaluer la performance des convertisseurs de longueur d’onde, et ce, dans le contexte des formats de modulation avancés. Les objectifs de cette thèse sont : 1) d’étudier la faisabilité des convertisseurs de longueur d’onde basés sur le mélange à quatre ondes dans les amplificateurs optiques à semi-conducteur pour les formats de modulation avancés et 2) de proposer une technique basée sur le traitement de signal numérique afin d’améliorer leur performance. En premier lieu, une étude expérimentale de la conversion de longueur d’onde de formats de modulation d’amplitude en quadrature (quadrature amplitude modulation - QAM) est réalisée. En particulier, la conversion de longueur d’onde de signaux 16-QAM à 16 Gbaud et 64-QAM à 5 Gbaud dans un amplificateur optique à semi-conducteur commercial est réalisée sur toute la bande C. Les résultats démontrent qu’en raison des distorsions non-linéaires induites sur le signal converti, le point d’opération optimal du convertisseur de longueur d’onde est différent de celui obtenu lors de la conversion de longueur d’onde de formats de modulation en intensité. En effet, dans le contexte des formats de modulation avancés, c’est le compromis entre la puissance du signal converti et les non-linéarités induites qui détermine le point d’opération optimal du convertisseur de longueur d’onde. Les récepteurs cohérents permettent l’utilisation de techniques de traitement de signal numérique afin de compenser la détérioration du signal transmis suite à sa détection. Afin de mettre à profit les nouvelles possibilités offertes par le traitement de signal numérique, une technique numérique de post-compensation des distorsions induites sur le signal converti, basée sur une analyse petit-signal des équations gouvernant la dynamique du gain à l’intérieur des amplificateurs optiques à semi-conducteur, est développée. L’efficacité de cette technique est démontrée à l’aide de simulations numériques et de mesures expérimentales de conversion de longueur d’onde de signaux 16-QAM à 10 Gbaud et 64-QAM à 5 Gbaud. Cette méthode permet d’améliorer de façon significative les performances du convertisseur de longueur d’onde, et ce, principalement pour les formats de modulation avancés d’ordre supérieur tel que 64-QAM. Finalement, une étude expérimentale exhaustive de la technique de post-compensation des distorsions induites sur le signal converti est effectuée pour des signaux 64-QAM. Les résultats démontrent que, même en présence d’un signal à bruité à l’entrée du convertisseur de longueur d’onde, la technique proposée améliore toujours la qualité du signal reçu. De plus, une étude du point d’opération optimal du convertisseur de longueur d’onde est effectuée et démontre que celui-ci varie en fonction des pertes optiques suivant la conversion de longueur d’onde. Dans un réseau de communication optique à routage en longueur d’onde, le signal est susceptible de passer par plusieurs étages de conversion de longueur d’onde. Pour cette raison, l’efficacité de la technique de post-compensation est démontrée, et ce pour la première fois dans la littérature, pour deux étages successifs de conversion de longueur d’onde de signaux 64-QAM à 5 Gbaud. Les résultats de cette thèse montrent que les convertisseurs de longueur d’ondes basés sur le mélange à quatre ondes dans les amplificateurs optiques à semi-conducteur, utilisés en conjonction avec des techniques de traitement de signal numérique, constituent une technologie extrêmement prometteuse pour les réseaux de communications optiques modernes à routage en longueur d’onde.