Reliability of peak O-2 uptake and O-2 uptake kinetics in step exercise tests in healthy subjects

To date little is known about the reliability of peak oxygen consumption (VO2pEAK) in incremental metronome paced step tests (1ST) and the reliability of on-kinetics VO2 has never been studied. We aimed to study the reliability of both tests. Eleven healthy subjects performed two ISTs until exhaustion. On two different days two duplicate 4 min constant metronome paced step tests (CST) were performed. VO2PEAK, mean response time (MRT) and phase II time constant (tau) were tested for reproducibility using the paired t-tests, in addition to the limits of agreement (LOA) and within subject coefficient of variation (COV). With a 95% LOA of 0.38 to 0.26 L min(-1), -8.7 to 9.1 s and -9.9 to 10.5 s they exhibit a COV of 3%, 4.5% and 6.9% for VO2PEAK, MRT and tau respectively. ST are sufficiently reliable for maximal and submaximal aerobic power assessments in healthy subjects and new studies of oxygen uptake kinetics in selected patient groups are warranted. (C) 2014 Elsevier B.V. All rights reserved.

Prior Heavy-Intensity Exercise's Enhancement of Oxygen-Uptake Kinetics and Short-Term High-Intensity Exercise Performance Independent of Aerobic-Training Status

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ozone and nitrogen dioxide gas sensor based on a nanostructured SrTi0.85Fe0.15O3 thin film

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Photoelectrochemical properties of FTO/p-NiO electrode induced by UV light irradiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Projeto de controlador gain scheduling usando realimentação derivativa via LMI

Pós-graduação em Engenharia Elétrica - FEIS

Análise de desempenho dos codecs suportados pelo Asterisk com e sem criptografia

The main objective is to analyze the performance of some codecs supported by Asterisk with and without encryption using RTP and SRTP, respectively, providing important data for decision-making in the implementation of a VoIP system with Asterisk. Thus, it is possible to realize both codecs as the protocol can be chosen depending on the application, or the system's main feature is the speed packet switching, security level or lower tolerance for unsuccessful calls. For this, tests were made with the codec with and without the use of cryptography to obtain some findings on the use of the same, giving more attention to the response time for the start of a call.

Deteccão de complexos QRS em eletrocardiogramas baseada na decomposição em valores singulares em multirresolução

Pós-graduação em Engenharia Elétrica - FEIS

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Programação no ensino de matemática utilizando Processing 2: Um estudo das relações formalizadas por alunos do ensino fundamental com baixo rendimento em matemática

Pós-graduação em Educação para a Ciência - FC

Prevalência de bexiga hiperativa e avaliação do impacto desse diagnóstico em mulheres de diferentes faixas etárias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Wildlife Master Volunteers: A Multi-County Approach to Resolving Human-Wildlife Conflicts

The Wildlife Master (WM) Program in Colorado was modeled after the highly successful Master Gardener volunteer program. In 10 highly populated suburban counties with large rural areas surrounding the Denver Metro Area, Colorado State University (CSU) Cooperative Extension Natural Resources agents train, supervise and manage these volunteers in the identification, referral, and resolution of wildlife damage issues. High quality, research-based training is provided by university faculty and other professionals in public health, animal damage control, wildlife management and animal behavior. Inquiries are responded to mainly via telephone. Calls by concerned residents are forwarded to WMs who provide general information about human-wildlife conflicts and possible ways to resolve complaints. Each volunteer serves a minimum of 14 days on phone duty annually, calling in from a remote location to a voice mail system from which phone messages can be conveniently retrieved. Response time per call is generally less than 24 hours. During 2004, more than 2,000 phone calls, e-mail messages and walk-in requests for assistance were fielded by 100 cooperative extension WMs. Calls fielded by volunteers in one county increased five-fold during the past five years, from 100 calls to over 500 calls annually. Valued at the rate of approximately $18.00 per volunteer hour, the leveraged value of each WM was about $450 in 2005, based on 25 hours of service and training. The estimated value of the program to Colorado in 2004 was over $45,000 of in-kind service, or about one full-time equivalent faculty member. This paper describes components of Colorado’s WM Program, with guides to the set-up of similar programs in other states.

SimSight: A Virtual Machine Based Dynamic Call Graph Generator

One problem with using component-based software development approach is that once software modules are reused over generations of products, they form legacy structures that can be challenging to understand, making validating these systems difficult. Therefore, tools and methodologies that enable engineers to see interactions of these software modules will enhance their ability to make these software systems more dependable. To address this need, we propose SimSight, a framework to capture dynamic call graphs in Simics, a widely adopted commercial full-system simulator. Simics is a software system that simulates complete computer systems. Thus, it performs nearly identical tasks to a real system but at a much lower speed while providing greater execution observability. We have implemented SimSight to generate dynamic call graphs of statically and dynamically linked functions in x86/Linux environment. A case study illustrates how we can use SimSight to identify sources of software errors. We then evaluate its performance using 12 integer programs from SPEC CPU2006 benchmark suite.

JVM-based Techniques for Improving Java Observability

Observability measures the support of computer systems to accurately capture, analyze, and present (collectively observe) the internal information about the systems. Observability frameworks play important roles for program understanding, troubleshooting, performance diagnosis, and optimizations. However, traditional solutions are either expensive or coarse-grained, consequently compromising their utility in accommodating today’s increasingly complex software systems. New solutions are emerging for VM-based languages due to the full control language VMs have over program executions. Existing such solutions, nonetheless, still lack flexibility, have high overhead, or provide limited context information for developing powerful dynamic analyses. In this thesis, we present a VM-based infrastructure, called marker tracing framework (MTF), to address the deficiencies in the existing solutions for providing better observability for VM-based languages. MTF serves as a solid foundation for implementing fine-grained low-overhead program instrumentation. Specifically, MTF allows analysis clients to: 1) define custom events with rich semantics ; 2) specify precisely the program locations where the events should trigger; and 3) adaptively enable/disable the instrumentation at runtime. In addition, MTF-based analysis clients are more powerful by having access to all information available to the VM. To demonstrate the utility and effectiveness of MTF, we present two analysis clients: 1) dynamic typestate analysis with adaptive online program analysis (AOPA); and 2) selective probabilistic calling context analysis (SPCC). In addition, we evaluate the runtime performance of MTF and the typestate client with the DaCapo benchmarks. The results show that: 1) MTF has acceptable runtime overhead when tracing moderate numbers of marker events; and 2) AOPA is highly effective in reducing the event frequency for the dynamic typestate analysis; and 3) language VMs can be exploited to offer greater observability.

AcMus: an Open, Integrated Platform for Room Acoustics Research

This article describes the design, implementation, and experiences with AcMus, an open and integrated software platform for room acoustics research, which comprises tools for measurement, analysis, and simulation of rooms for music listening and production. Through use of affordable hardware, such as laptops, consumer audio interfaces and microphones, the software allows evaluation of relevant acoustical parameters with stable and consistent results, thus providing valuable information in the diagnosis of acoustical problems, as well as the possibility of simulating modifications in the room through analytical models. The system is open-source and based on a flexible and extensible Java plug-in framework, allowing for cross-platform portability, accessibility and experimentation, thus fostering collaboration of users, developers and researchers in the field of room acoustics.

An Overview of the Use of Metadata in Agriculture

Metadata is data that fully describes the data and the areas they represent, allowing the user to decide on their use as best as possible. Allow reporting on the existence of a set of data linked to specific needs. The use of metadata has the purpose of documenting and organizing a structured organizational data in order to minimize duplication of efforts to locate them and to facilitate maintenance. It also provides the administration of large amounts of data, discovery, retrieval and editing features. The global use of metadata is regulated by a technical group or task force composed of several segments such as industries, universities and research firms. Agriculture in particular is a good example for the development of typical applications using metadata is the integration of systems and equipment, allowing the implementation of techniques used in precision agriculture, the integration of different computer systems via webservices or other type of solution requires the integration of structured data. The purpose of this paper is to present an overview of the standards of metadata areas consolidated as agricultural.