Estudios sonoros desde la Región Andina UIO-BOG = Sonic Studies from the Andean Region

El presente trabajo se basa en el análisis de las prácticas sonoras y, a partir de ahí, de una apuesta por un nuevo campo de estudios, el de los Estudios Sonoros; cuyo fin último es establecer una perspectiva epistemológica y política de las prácticas experimentales con sonido, en diálogo con proyectos provenientes de los Estudios Culturales, como son el proyecto modernidad/ colonialidad, las teorías poscoloniales y los estudios subalternos. Desde estas posiciones teóricas y políticas, estoy conciente de que el sonido, y sus posibilidades experimentales, articulan un régimen influyente en el mundo contemporáneo. Razón por la cual, sobre todo, esta es una reflexión desde las prácticas sonoras que surgen en dos ciudades andinas: Quito y Bogotá, como una expresión emergente para establecer encuentros Sur-Sur, que puedan generar diálogos epistemológicos sobre el sonido. En otras palabras, en este libro estoy proponiéndo a mis lectoras y lectores, una especie de “juego epistémico”: comprender el sonido como un lugar de conocimiento.Y el sonido es conocimiento precisamente porque el sonido nos permite vernos (y permite verme) como un sujeto históricamente ubicado. En el capítulo primero abordaré la pregunta de cómo se fue articulando el régimen discursivo del sonido como arte, dentro de diálogos y conflictos que se generaron en el contexto de la Guerra Fría que, para el caso de Latinoamérica, constituyó la transferencia de conocimientos articulados desde promesas como el desarrollismo y la modernización. También analizaré el cómo se configuraron, tanto en Quito como en Bogotá, las nuevas subjetividades “artísticas” frente al discurso de las vanguardias europeas del siglo XX y el experimentalismo estadounidense. Como verán mis lectoras y lectores, estos modelos, aparentemente originales e innovadores, fueron influidos por formas de saber y poder moduladas alrededor de la idea de la renovación de las artes a través del sonido, formulación que instaló el sonido como dispositivo/materia desde el cual, en detrimento de lo local, se articuló la fantasía de un universal deseado: las máquinas de sonido y de reproducibilidad técnica. En el segundo capítulo me centraré en algunas prácticas de experimentación sonora para indagar cuestiones como el estilo, procedimiento posmodernista ampliamente diseminado dentro de las instituciones artísticas y de éstas hacia la vida cotidiana. A partir de lo cual intentamos esclarecer el porqué de la confiscación y sometimiento de lo sonoro bajo el cuidadoso encierro del régimen discursivo del arte, que de manera eficiente lo absorbe como un “nuevo” medio para disciplinarlo y nombrarlo como proyecto sonoro, pieza sonora, instalación sonora, performance sonoro, acción sonora, objeto sonoro, paisaje sonoro, composición, loop. En otras palabras, cómo todo lo que genera el posmodernismo es apropiado por las universidades para crear la noción de “pastiche”, en donde todo cabe, bajo la indulgencia del “estilo”, procedimiento desde el cual se va instalando el régimen de verdad de un nuevo universal deseado: El Arte Sonoro. En este mismo capítulo, indagamos sobre las lógicas de producción de estas prácticas, para avanzar hacia las lógicas culturales donde lo sonoro se define y redefine por el posicionamiento y el lugar desde el que actúan los sujetos. Bajo estas consideraciones, queda planteada la propuesta, acuñada por esta investigación, la de un nuevo campo de estudio: Los Estudios Sonoros, propuesta que debe ser entendida como lo que algunos intelectuales latinoamericanos llaman epistemes emergentes11, precisamente porque esta investigación hace un esfuerzo por esclarecer las interdependencias existentes entre prácticas artísticas con sonido, el campo discursivo del arte y otras construcciones discursivas de la modernidad-colonialidad que establecen y regulan la formación del régimen sonoro. En el capítulo tercero analizaré cómo un “medio de creación” se vuelve hegemónico y cómo ciertos artistas que usan el sonido, bajo la pretensión de representar la marginalidad, marginalizan aún más a las personas que han sido históricamente subalternizadas. Seguido de este análisis, en el capítulo cuarto, indagamos sobre las tácticas que marcan nuevas formas de adhesión, de representación y de resistencia cultural, las mismas que son estrategias suplementarias frente, y en contra, de los discursos dominantes de las prácticas artísticas con sonido y las geopolíticas de conocimiento.

Age-specific survival of male Golden-cheeked Warblers on the Fort Hood Military Reservation, Texas

Population models are essential components of large-scale conservation and management plans for the federally endangered Golden-cheeked Warbler (Setophaga chrysoparia; hereafter GCWA). However, existing models are based on vital rate estimates calculated using relatively small data sets that are now more than a decade old. We estimated more current, precise adult and juvenile apparent survival (Φ) probabilities and their associated variances for male GCWAs. In addition to providing estimates for use in population modeling, we tested hypotheses about spatial and temporal variation in Φ. We assessed whether a linear trend in Φ or a change in the overall mean Φ corresponded to an observed increase in GCWA abundance during 1992-2000 and if Φ varied among study plots. To accomplish these objectives, we analyzed long-term GCWA capture-resight data from 1992 through 2011, collected across seven study plots on the Fort Hood Military Reservation using a Cormack-Jolly-Seber model structure within program MARK. We also estimated Φ process and sampling variances using a variance-components approach. Our results did not provide evidence of site-specific variation in adult Φ on the installation. Because of a lack of data, we could not assess whether juvenile Φ varied spatially. We did not detect a strong temporal association between GCWA abundance and Φ. Mean estimates of Φ for adult and juvenile male GCWAs for all years analyzed were 0.47 with a process variance of 0.0120 and a sampling variance of 0.0113 and 0.28 with a process variance of 0.0076 and a sampling variance of 0.0149, respectively. Although juvenile Φ did not differ greatly from previous estimates, our adult Φ estimate suggests previous GCWA population models were overly optimistic with respect to adult survival. These updated Φ probabilities and their associated variances will be incorporated into new population models to assist with GCWA conservation decision making.

Post occupancy evaluation of a building employing windcatchers for summer ventilation

A combined windcatcher and light pipe (SunCatcher) was installed in the seminar room at the University of Reading, UK. Monitoring of indoor environment in real weather conditions was conducted to evaluate the application of windcatchers for natural ventilation. In addition, a subjective occupancy survey was undertaken. External weather conditions and internal indoor air quality indicators were recorded. The “tracer-gas decay” method using SF6 was used to establish air change rate for various conditions. The results indicated that the ventilation rate achieved through the windcatcher depends on the difference between internal and external air temperatures, and on wind speed and direction, in agreement with other published work in the area. The indoor air quality parameters were found to be within acceptable levels when the windcatcher was in operation. The measured air change rate was between 1.5ac/h and 6.8ac/h. Occupants’ questionnaires showed 75 per cent satisfaction with the internal conditions and welcomed the installation of the systems in UK buildings.

Burn-in policies for products having dormant states

Many systems might have a long time dormant period, during which the systems are not operated. For example, most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. Warranty terms for such products may cover the time starting from their installation times to the end of their warranty periods. Prior to the commissioning of the building, the building services products are protected by warranty although they are not operating. Developing optimal burn-in policies for such products is important when warranty cost is analysed. This paper considers two burn-in policies, which incur different burn-in costs, and have different burn-in effects on the products. A special case about the relationship between the failure rates of the products at the dormant state and at the operating state is presented. Numerical examples compare the mean total warranty costs of these two burn-in policies.

Burn in policies for products having dormant states

Constructing a building is a long process which can take several years. Most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. The warranty term for the building service systems may cover the time starting from their installation to the end of the warranty period. Prior to the commissioning of the building, the building services systems are protected by warranty although they are not operated. The bum in time for such systems is important when warranty costs is analyzed. In this paper, warranty cost models for products with burn in periods are presented. Two burn in policies are developed to optimize the total mean warranty cost. A special case on the relationship between the failure rates of the product at the dormant state and at the I operating state is presented.

Warranty cost analysis for products with a dormant state

Most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. The warranty of the products may cover the time starting from their installation to the end of the warranty period. Prior to the commissioning of the building, the products are at a dormant mode (i.e., not operated) but protected by the warranty. For such products, both the usage intensity and the failure patterns are different from those with continuous usage intensity and failure patterns. This paper develops warranty cost models for repairable products with a dormant mode from both the manufacturer's and buyer's perspectives. Relationships between the failure patterns at the dormant mode and at the operational mode are also discussed. Numerical examples and sensitivity analysis are used to demonstrate the applicability of the methodology derived in the paper.

Design considerations for the multiband OFDM physical layer in consumer electronic products

The creation of Wireless Personal Area Networks (WPANs) offers the Consumer Electronics industry a mechanism to truly unwire consumer products, leading to portability and ease of installation as never seen before. WPAN's can offer data-rates exceeding those that are required to convey high quality broadcast video, thus users can easily connect to high quality video for multimedia presentations in education, libraries, advertising, or have a wireless connection at home. There have been many WPAN proposals, but this paper concentrates on ECMA-368 as this standard has the largest industrial and implementers' forum backing. This paper discusses the technology behind ECMA-368, the required numerical bandwidth, buffer memory requirements and implementation considerations while concentrating on supporting all the offered data-rates'.

Design issues toward a cost effective physical layer for multiband OFDM (ECMA-368) in consumer products

The creation of Wireless Personal Area Networks (WPANs) offers the Consumer Electronics industry a mechanism to truly unwire consumer products, leading to portability and ease of installation as never seen before. WPAN's can offer data-rates exceeding those that are required to convey high quality broadcast video, thus users can easily connect to high quality video for multimedia presentations in education, libraries, advertising, or have a wireless connection at home. There have been many WPAN proposals, but this paper concentrates on ECMA-368 as this standard has the largest industrial and implementers' forum backing. With the aim to effective consumer electronic define and create cost equipment this paper discusses the technology behind ECMA-368 physical layer, the design freedom availabilities, the required processing, buffer memory requirements and implementation considerations while concentrating on supporting all the offered data-rates(1).

Building integration photovoltaic module with reference to Ghana: using triple junction amorphous silicon

This paper assesses the potential for using building integrated photovoltaic (BIPV) roof shingles made from triple-junction amorphous silicon (3a-Si) for electrification and as a roofing material in tropical countries, such as Accra, Ghana. A model roof was constructed using triple-junction amorphous (3a-Si) PV on one section and conventional roofing tiles on the other. The performance of the PV module and tiles were measured, over a range of ambient temperatures and solar irradiance. PVSyst (a computer design software) was used to determine the most appropriate angle of tilt. It was observed that 3a-Si performs well in conditions such as Accra, because it is insensitive to high temperatures. Building integration gives security benefits, and reduces construction costs and embodied energy, compared to freestanding PV systems. Again, it serves as a means of protection from salt spray from the oceans and works well even when shaded. However, compared to conventional roofing materials, 3a-Si would increase the indoor temperature by 1-2 °C depending on the surface area of the roof covered with the PV modules. The results presented in this research enhance the understanding of varying factors involved in the selection of an appropriate method of PV installation to offset the short falls of the conventional roofing material in Ghana.

The implementation of a low-cost production-line inspection system

This article describes an application of computers to a consumer-based production engineering environment. Particular consideration is given to the utilisation of low-cost computer systems for the visual inspection of components on a production line in real time. The process of installation is discussed, from identifying the need for artificial vision and justifying the cost, through to choosing a particular system and designing the physical and program structure.

Predicting microbial pollution concentrations in UK rivers in response to land use change

The Water Framework Directive has caused a paradigm shift towards the integrated management of recreational water quality through the development of drainage basin-wide programmes of measures. This has increased the need for a cost-effective diagnostic tool capable of accurately predicting riverine faecal indicator organism (FIO) concentrations. This paper outlines the application of models developed to fulfil this need, which represent the first transferrable generic FIO models to be developed for the UK to incorporate direct measures of key FIO sources (namely human and livestock population data) as predictor variables. We apply a recently developed transfer methodology, which enables the quantification of geometric mean presumptive faecal coliforms and presumptive intestinal enterococci concentrations for base- and high-flow during the summer bathing season in unmonitored UK watercourses, to predict FIO concentrations in the Humber river basin district. Because the FIO models incorporate explanatory variables which allow the effects of policy measures which influence livestock stocking rates to be assessed, we carry out empirical analysis of the differential effects of seven land use management and policy instruments (fiscal constraint, production constraint, cost intervention, area intervention, demand-side constraint, input constraint, and micro-level land use management) all of which can be used to reduce riverine FIO concentrations. This research provides insights into FIO source apportionment, explores a selection of pollution remediation strategies and the spatial differentiation of land use policies which could be implemented to deliver river quality improvements. All of the policy tools we model reduce FIO concentrations in rivers but our research suggests that the installation of streamside fencing in intensive milk producing areas may be the single most effective land management strategy to reduce riverine microbial pollution.

Ballet

This solo exhibition featured Ballet, a filmed performance and video installation by Szuper Gallery and an installation of original archive films. Ballet engages with recent histories of rural filmmaking, with movement and dance, linking everyday farming movements with the aesthetics of dance. The starting point for this new work was a series of archival films from the MERL collection, which were made for British farmers as a means both for information and for propaganda, to provide warnings of contagion and nuclear catastrophe, describing procedure and instruction in the case of emergency. Gestural performances and movements of background actors observed in those films were re-scripted into a new choreography of movement for camera to form a playful assemblage.

Evaluation of dichroic material for enhancing light pipe/natural ventilation and daylighting in an integrated system

Integration of natural ventilation and daylighting in a single installation would make both technologies more attractive. One method for the integration is the use of concentric light pipe and ventilation stack. By constructing the light pipe using dichroic materials, the infrared part of the solar radiation is allowed to be transmitted to the stack but the visible light is guided by the light pipe into a room. The heat gain to the interior can be reduced and the thermal stack effect strengthened. Work presented here involved the experimental and computational evaluation of dichroic materials for enhancing both natural stack ventilation and daylighting. The transmittance of a dichroic light pipe was found to be similar to that of a light pipe with a 95% specular reflectance. The infra-red radiation transmitted through the dichroic material into a passive stack was found to enhance the natural ventilation flow by up to 14%. The effect is greater in summer than in winter, which is highly desirable as there is often a lack of driving force for natural stack ventilation in summer.