HeatWave : a handheld 3D thermography system for energy auditing

Energy auditing is an effective but costly approach for reducing the long-term energy consumption of buildings. When well-executed, energy loss can be quickly identified in the building structure and its subsystems. This then presents opportunities for improving energy efficiency. We present a low-cost, portable technology called "HeatWave" which allows non-experts to generate detailed 3D surface temperature models for energy auditing. This handheld 3D thermography system consists of two commercially available imaging sensors and a set of software algorithms which can be run on a laptop. The 3D model can be visualized in real-time by the operator so that they can monitor their degree of coverage as the sensors are used to capture data. In addition, results can be analyzed offline using the proposed "Spectra" multispectral visualization toolbox. The presence of surface temperature data in the generated 3D model enables the operator to easily identify and measure thermal irregularities such as thermal bridges, insulation leaks, moisture build-up and HVAC faults. Moreover, 3D models generated from subsequent audits of the same environment can be automatically compared to detect temporal changes in conditions and energy use over time.

Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires

Fire safety has become an important part in structural design due to the ever increasing loss of properties and lives during fires. Conventionally the fire rating of load bearing wall systems made of Light gauge Steel Frames (LSF) is determined using fire tests based on the standard time-temperature curve in ISO834 [1]. However, modern commercial and residential buildings make use of thermoplastic materials, which mean considerably high fuel loads. Hence a detailed fire research study into the fire performance of LSF walls was undertaken using realistic design fire curves developed based on Eurocode parametric [2] and Barnett’s BFD [3] curves using both full scale fire tests and numerical studies. It included LSF walls without cavity insulation, and the recently developed externally insulated composite panel system. This paper presents the details of finite element models developed to simulate the full scale fire tests of LSF wall panels under realistic design fires. Finite element models of LSF walls exposed to realistic design fires were developed, and analysed under both transient and steady state fire conditions using the measured stud time-temperature curves. Transient state analyses were performed to simulate fire test conditions while steady state analyses were performed to obtain the load ratio versus time and failure temperature curves of LSF walls. Details of the developed finite element models and the results including the axial deformation and lateral deflection versus time curves, and the stud failure modes and times are presented in this paper. Comparison with fire test results demonstrate the ability of developed finite element models to predict the performance and fire resistance ratings of LSF walls under realistic design fires.

Handheld 3D thermography using range sensing and computer vision

This thesis developed a method for real-time and handheld 3D temperature mapping using a combination of off-the-shelf devices and efficient computer algorithms. It contributes a new sensing and data processing framework to the science of 3D thermography, unlocking its potential for application areas such as building energy auditing and industrial monitoring. New techniques for the precise calibration of multi-sensor configurations were developed, along with several algorithms that ensure both accurate and comprehensive surface temperature estimates can be made for rich 3D models as they are generated by a non-expert user.

Professional conversations : a collaborative approach to support policy implementation, professional learning and practice change in ECEC

In 2012, Australia introduced a new National Quality Framework, comprising enhanced quality expectations for early childhood education and care services, two national learning frameworks and a new Assessment and Rating System spanning child care centres, kindergartens and preschools, family day care and outside school hours care. This is the linchpin in a series of education reforms designed to support increased access to higher quality early childhood education and care (ECEC) and successful transition to school. As with any policy change, success in real terms relies upon building shared understanding and the capacity of educators to apply new knowledge and to support change and improved practice within their service. With this in mind, a collaborative research project investigated the efficacy of a new approach to professional learning in ECEC: the professional conversation. This paper reports on the trial and evaluation of a series of professional conversations to support implementation of one element of the NQF, the Early Years Learning Framework (DEEWR,2009), and their capacity to promote collaborative reflective practice, shared understanding, and improved practice in ECEC. Set against the backdrop of the NQF, this paper details the professional conversation approach, key challenges and critical success factors, and the learning outcomes for conversation participants. Findings support the efficacy of this approach to professional learning in ECEC, and its capacity to support policy reform and practice change in ECEC.

Can we text you? A qualitative exploration of young unemployed job-seekers’ attitudes to receiving resilience-building SMS messages

A significant minority of young job-seekers remain unemployed for many months, and are at risk of developing depression. Both empirical studies and theoretical models suggest that cognitive, behavioural and social isolation factors interact to increase this risk. Thus, interventions that reduce or prevent depression in young unemployed job-seekers by boosting their resilience are required. Mobile phones may be an effective medium to deliver resilience-boosting support to young unemployed people by using SMS messages to interrupt the feedback loop of depression and social isolation. Three focus groups were conducted to explore young unemployed job-seekers’ attitudes to receiving and requesting regular SMS messages that would help them to feel supported and motivated while job-seeking. Participants reacted favourably to this proposal, and thought that it would be useful to continue to receive and request SMS messages for a few months after commencing employment as well.

Building resilience in transcultural adults (BRiTA) : developing a novel preventative intervention

There is a dearth of preventative programs that enhance the Australian culturally and linguistically diverse (CALD) adults’ resilience to cope with the acculturation process. This article introduces the reader to the BRiTA Futures for Adults and Parents, a culture and language sensitive program for the CALD. The conceptual framework and the development process are described. The manualised program consisting of one introductory and eight intervention modules is presented. A training program is also developed to train facilitators, who can deliver the program in English or other languages. Preliminary trials indicated that the program was received well by the consumers. A block mode, instead of the traditional weekly sessions, appeared to be more practical for the small population for which it was trialled. Implications and future directions are discussed.

Real-time image classification for adaptive mission planning using an Autonomous Underwater Vehicle

Real-time image analysis and classification onboard robotic marine vehicles, such as AUVs, is a key step in the realisation of adaptive mission planning for large-scale habitat mapping in previously unexplored environments. This paper describes a novel technique to train, process, and classify images collected onboard an AUV used in relatively shallow waters with poor visibility and non-uniform lighting. The approach utilises Förstner feature detectors and Laws texture energy masks for image characterisation, and a bag of words approach for feature recognition. To improve classification performance we propose a usefulness gain to learn the importance of each histogram component for each class. Experimental results illustrate the performance of the system in characterisation of a variety of marine habitats and its ability to operate onboard an AUV's main processor suitable for real-time mission planning.

Informing healthy building design with biophilic urbanism design principles : a review and synthesis of current knowledge and research

Links between human health and wellbeing, and contact with nature are well understood in the fields of health and psychology, and more recently are gaining attention in the built environment industry. In 1984, E.O. Wilson coined the term ‘biophilia’ to describe the tendency for humans to have an innately emotional response to other living organisms. A growing number of researchers around the world are now exploring the impact of nature in urban environments (i.e. biophilic urbanism) on the human condition, including many indicators of human physical and mental health, recovery and performance. There is also an emergence of research on the potential for biophilic urbanism to address other challenges related to climate change mitigation and adaptation. This paper presents key findings from a review of key literature to date, discussing opportunities for biophilic urbanism to both improve occupant experience and performance, as well as addressing other sustainability objectives including climate change mitigation and adaptation. The paper presents an emerging framework for considering biophilic design opportunities and highlights implications for the built environment industry. This research draws on an Australian project considering biophilic urbanism in the response to climate change, within the Sustainable Built Environment National Research Centre. This includes findings from a literature review, a survey pilot study and two workshops undertaken in Perth and Brisbane with a variety of industry and government stakeholders.

Buying, selling and building a home

A contract to buy or sell a home is the most important contract most people will ever make. It is crucial that the purchase or sale is made carefully and correctly. Similarly, maintaining a home and undertaking repairs or renovations can be significant aspects of life. This chapter will explore these issues under the broad headings of: • buying a home • selling a home • building or renovating a home.

Pulse-coupled neural network performance for real-time identification of vegetation during forced landing

Safety concerns in the operation of autonomous aerial systems require safe-landing protocols be followed during situations where the mission should be aborted due to mechanical or other failure. This article presents a pulse-coupled neural network (PCNN) to assist in the vegetation classification in a vision-based landing site detection system for an unmanned aircraft. We propose a heterogeneous computing architecture and an OpenCL implementation of a PCNN feature generator. Its performance is compared across OpenCL kernels designed for CPU, GPU, and FPGA platforms. This comparison examines the compute times required for network convergence under a variety of images to determine the plausibility for real-time feature detection.

Kamouflage : loss-resistant password management

We introduce Kamouflage: a new architecture for building theft-resistant password managers. An attacker who steals a laptop or cell phone with a Kamouflage-based password manager is forced to carry out a considerable amount of online work before obtaining any user credentials. We implemented our proposal as a replacement for the built-in Firefox password manager, and provide performance measurements and the results from experiments with large real-world password sets to evaluate the feasibility and effectiveness of our approach. Kamouflage is well suited to become a standard architecture for password managers on mobile devices.

Building sensitising terms to understand free-play in open-ended interactive art environments

In this paper we introduce and discuss the nature of free-play in the context of three open-ended interactive art installation works. We observe the interaction work of situated free-play of the participants in these environments and, building on precedent work, devise a set of sensitising terms derived both from the literature and from what we observe from participants interacting there. These sensitising terms act as guides and are designed to be used by those who experience, evaluate or report on open-ended interactive art. That is, we propose these terms as a common-ground language to be used by participants communicating while in the art work to describe their experience, by researchers in the various stages of research process (observation, coding activity, analysis, reporting, and publication), and by inter-disciplinary researchers working across the fields of HCI and art. This work builds a foundation for understanding the relationship between free-play, open-ended environments, and interactive installations and contributes sensitising terms useful for the HCI community for discussion and analysis of open-ended interactive art works.