Processing-structure-property relationships in solid-state shear pulverization: Parametric study of specific energy

Solid-state shear pulverization (SSSP) is a unique processing technique for mechanochemical modification of polymers, compatibilization of polymer blends, and exfoliation and dispersion of fillers in polymer nanocomposites. A systematic parametric study of the SSSP technique is conducted to elucidate the detailed mechanism of the process and establish the basis for a range of current and future operation scenarios. Using neat, single component polypropylene (PP) as the model material, we varied machine type, screw design, and feed rate to achieve a range of shear and compression applied to the material, which can be quantified through specific energy input (Ep). As a universal processing variable, Ep reflects the level of chain scission occurring in the material, which correlates well to the extent of the physical property changes of the processed PP. Additionally, we compared the operating cost estimates of SSSP and conventional twin screw extrusion to determine the practical viability of SSSP.

Levels-of-processing effects on "remember" responses in recognition for familiar and unfamiliar tunes

We investigated the effect of level-of-processing manipulations on “remember” and “know” responses in episodic melody recognition (Experiments 1 and 2) and how this effect is modulated by item familiarity (Experiment 2). In Experiment 1, participants performed 2 conceptual and 2 perceptual orienting tasks while listening to familiar melodies: judging the mood, continuing the tune, tracing the pitch contour, and counting long notes. The conceptual mood task led to higher d' rates for “remember” but not “know” responses. In Experiment 2, participants either judged the mood or counted long notes of tunes with high and low familiarity. A level-of-processing effect emerged again in participants’ “remember” d' rates regardless of melody familiarity. Results are discussed within the distinctive processing framework.

The Pre-1980 Roots of Neoliberal Financial Deregulation

U.S. financial deregulation is often popularly presented as a fundamental attack on financial regulation that began with neoliberalism's Big Bang in 1980. This paper argues this position is wrong in two ways. First, it is a process that stretches back decades before 1980. Textbook mentions of 1970s precursor "financial innovations" fall far short of presenting the breadth and duration of the pre-1980 attack on the system of regulation. Second, it has not been an across-the-board attack on financial regulation in the name of market efficiency as required by its ideology and claimed by its advocates, but rather a focused attack on only one of the five pillars of the system of regulation. This paper develops both of these assertions through a presentation of the five central pillars of the pre-1980 system of financial regulation, and the four major attacks on the three different aspects of the restrictions on financial competition.

Pedagogical techniques and student outcomes in applied instrumental lessons taught by experienced and pre-service American music teachers.

The purpose of the study was to examine the effect of teacher experience on student progress and performance quality in an introductory applied lesson. Nine experienced teachers and 15 pre-service teachers taught an adult beginner to play ‘Mary Had a Little Lamb’ on a wind instrument. The lessons were videotaped for subsequent analysis of teaching behaviors and performance achievement. Following instruction, a random sample of teachers was interviewed about their perceptions of the lesson. A panel of adjudicators rated final pupil performances. No significant difference was found between pupils taught by experienced and pre-service teachers in the quality of their final performance. Systematic observation of the videotaped lessons showed that participant teachers provided relatively frequent and highly positive reinforcement during the lessons. Pupils of experienced teachers talked significantly more during the lessons than did pupils of pre-service teachers. Pre-service teachers modeled significantly more on their instruments than did experienced teachers.

Processing-Structure-Property Relationships in Solid-State Shear Pulverization: Parametric Study of specific energy

Solid-state shear pulverization (SSSP) is a unique processing technique for mechanochemical modification of polymers, compatibilization of polymer blends, and exfoliation and dispersion of fillers in polymer nanocomposites. A systematic parametric study of the SSSP technique is conducted to elucidate the detailed mechanism of the process and establish the basis for a range of current and future operation scenarios. Using neat, single component polypropylene (PP) as the model material, we varied machine type, screw design, and feed rate to achieve a range of shear and compression applied to the material, which can be quantified through specific energy input (Ep). As a universal processing variable, Ep reflects the level of chain scission occurring in the material, which correlates well to the extent of the physical property changes of the processed PP. Additionally, we compared the operating cost estimates of SSSP and conventional twin screw extrusion to determine the practical viability of SSSP.

Parallel vector processing of multidimensional orthogonal transforms for digital signal processing applications

The performance of the parallel vector implementation of the one- and two-dimensional orthogonal transforms is evaluated. The orthogonal transforms are computed using actual or modified fast Fourier transform (FFT) kernels. The factors considered in comparing the speed-up of these vectorized digital signal processing algorithms are discussed and it is shown that the traditional way of comparing th execution speed of digital signal processing algorithms by the ratios of the number of multiplications and additions is no longer effective for vector implementation; the structure of the algorithm must also be considered as a factor when comparing the execution speed of vectorized digital signal processing algorithms. Simulation results on the Cray X/MP with the following orthogonal transforms are presented: discrete Fourier transform (DFT), discrete cosine transform (DCT), discrete sine transform (DST), discrete Hartley transform (DHT), discrete Walsh transform (DWHT), and discrete Hadamard transform (DHDT). A comparison between the DHT and the fast Hartley transform is also included.(34 refs)

Digital signal processing and digital system design using discrete cosine transform [student course]

The discrete cosine transform (DCT) is an important functional block for image processing applications. The implementation of a DCT has been viewed as a specialized research task. We apply a micro-architecture based methodology to the hardware implementation of an efficient DCT algorithm in a digital design course. Several circuit optimization and design space exploration techniques at the register-transfer and logic levels are introduced in class for generating the final design. The students not only learn how the algorithm can be implemented, but also receive insights about how other signal processing algorithms can be translated into a hardware implementation. Since signal processing has very broad applications, the study and implementation of an extensively used signal processing algorithm in a digital design course significantly enhances the learning experience in both digital signal processing and digital design areas for the students.

Corpus-Based Speech Enhancement With Uncertainty Modeling and Cepstral Smoothing

We present a new approach for corpus-based speech enhancement that significantly improves over a method published by Xiao and Nickel in 2010. Corpus-based enhancement systems do not merely filter an incoming noisy signal, but resynthesize its speech content via an inventory of pre-recorded clean signals. The goal of the procedure is to perceptually improve the sound of speech signals in background noise. The proposed new method modifies Xiao's method in four significant ways. Firstly, it employs a Gaussian mixture model (GMM) instead of a vector quantizer in the phoneme recognition front-end. Secondly, the state decoding of the recognition stage is supported with an uncertainty modeling technique. With the GMM and the uncertainty modeling it is possible to eliminate the need for noise dependent system training. Thirdly, the post-processing of the original method via sinusoidal modeling is replaced with a powerful cepstral smoothing operation. And lastly, due to the improvements of these modifications, it is possible to extend the operational bandwidth of the procedure from 4 kHz to 8 kHz. The performance of the proposed method was evaluated across different noise types and different signal-to-noise ratios. The new method was able to significantly outperform traditional methods, including the one by Xiao and Nickel, in terms of PESQ scores and other objective quality measures. Results of subjective CMOS tests over a smaller set of test samples support our claims.

Processing and Composition Effects on the Fracture Behavior of Spray-Formed 7XXX Series Al Alloys

The fracture properties of high-strength spray-formed Al alloys were investigated, with consideration of the effects of elemental additions such as zinc,manganese, and chromium and the influence of the addition of SiC particulate. Fracture resistance values between 13.6 and 25.6 MPa (m)1/2 were obtained for the monolithic alloys in the T6 and T7 conditions, respectively. The alloys with SiC particulate compared well and achieved fracture resistance values between 18.7 and 25.6 MPa (m)1/2. The spray-formed materials exhibited a loss in fracture resistance (KI) compared to ingot metallurgy 7075 alloys but had an improvedperformance compared to high-solute powder metallurgy alloys of similar composition. Characterization of the fracture surfaces indicated a predominantly intergranular decohesion, possibly facilitated by the presence of incoherent particles at the grain boundary regions and by the large strength differentialbetween the matrix and precipitate zone. It is believed that at the slip band-grain boundary intersection, particularly in the presence of large dispersoids and/or inclusions, microvoid nucleation would be significantly enhanced. Differences in fracture surfaces between the alloys in the T6 and T7 condition were observed and are attributed to inhomogeneous slip distribution, which results in strain localization at grain boundaries. The best overall combination of fracture resistance properties were obtained for alloys with minimum amounts of chromium and manganese additions.

Investigation of Solid-State Shear Pulverization Processing Parameters for Polyethylene-Clay Nanocomposites

Investigates multiple processing parameters, includingpolymer type, filler type, processing technique, severity of SSSP (Solid-state shear pulverization)processing, and postprocessing, of SSSP. HDPE and LLDPE polymers with pristine clay and organo-clay samples are explored. Effects on crystallization, high-temperature behavior, mechanicalproperties, and gas barrier properties are examined. Thermal, mechanical, and morphological characterization is conducted to determine polymer/filler compatibility and superior processing methods for the polymer-clay nanocomposites.

Improved column-based radiochemical processing of the generator produced 68Ga

An improved chemical strategy for processing of the generator produced 68Ga was developed based on processing of the original 68Ge/68Ga generator eluate on a micro-column. Direct pre-concentration and purification of the eluted 68Ga is performed on a cation-exchange resin in hydrochloric acid/acetone media. A supplementary step based on a second micro-column filled with a second resin allows direct re-adsorption of 68Ga eluted from the cation exchanger. 68Ga is finally striped from the second resin with a small volume of pure water. For this purpose a strong anion exchanger and a novel extraction chromatographic resin based on tetraalkyldiglycolamides are characterized. The strategy allows online pre-concentration and purification of 68Ga from the original generator eluate. The supplementary column allows transferring 68Ga with high radionuclide and chemical quality in the aqueous solution with small volume and low acidity useful for direct radiolabeling reactions.

Effect Of Yolk Testosterone On Gonadal Testosterone And Aromatase Activity In The Pre-Optic Area Of The Brain In Male Domestic C

Maternal effects are a mother¿s non-genetic contributions to development that alter phenotypic traits in offspring. Maternal effects can take the form of prenatal allocation of resources, such as the deposition of androgens into egg yolks. For example, elevated yolk testosterone increases male sexual behaviors such as copulation solicitation and courtship displays in some avian species, in addition to aggressive behaviors like pecks and intimidating postures towards same-sex competitors. However, the mechanism connecting in ovo testosterone exposure with changes in sexual and aggressive behaviors has yet to be elucidated. While testosterone released by the gonads is important in the activation of sexual behaviors, it must undergo conversion to estrogen by the enzyme aromatase in the pre-optic area (POA) of the avian brain for full expression of sexual activity. POA aromatase is also necessary for the activation of aggressive behaviors in male birds. This experiment tested the hypothesis that elevated yolk testosterone leads to changes in POA aromatase activity and levels of gonadal testosterone, as these two endocrine parameters may mediate the effect of yolk testosterone on the frequency of sexual and aggressive behaviors. The effect of elevated yolk testosterone on gonadal testosterone levels and aromatase activity in the POA of 3-day-old domestic chickens Gallus gallus domesticus was investigated. Unincubated eggs were injected with either 10 ng testosterone in 50 ¿L sesame oil (¿T chicks¿) or 50 ¿L sesame oil (¿C chicks¿). At 3 days post-hatch, gonadal testosterone content was measured after steroid extraction using an EIA, and aromatase activity in the POA was quantified by measuring the production of tritiated water from [1ß-3H]-androstenedione. I predicted that gonadal testosterone levels and brain aromatase activity would be higher in T chicks, however found no difference between treatments. Though juvenile T production peaks at 3 days post-hatch, it is possible that the reproductive systems, including the testes and POA, are not fully developed at this time.

Effect Of Confined Impinging Jet Mixing Processing Parameters On Poly (Lactic Acid) Nanoparticle Morphology

Biodegradable nanoparticles are at the forefront of drug delivery research as they provide numerous advantages over traditional drug delivery methods. An important factor affecting the ability of nanoparticles to circulate within the blood stream and interact with cells is their morphology. In this study a novel processing method, confined impinging jet mixing, was used to form poly (lactic acid) nanoparticles through a solvent-diffusion process with Pluronic F-127 being used as a stabilizing agent. This study focused on the effects of Reynolds number (flow rate), surfactant presence in mixing, and polymer concentration on the morphology of poly (lactic acid) nanoparticles. In addition to looking at the parameters affecting poly (lactic acid) morphology, this study attempted to improve nanoparticle isolation and purification methods to increase nanoparticle yield and ensure specific morphologies were not being excluded during isolation and purification. The isolation and purification methods used in this study were centrifugation and a stir cell. This study successfully produced particles having pyramidal and cubic morphologies. Despite successful production of these morphologies the yield of non-spherical particles was very low, additionally great variability existed between redundant trails. Surfactant was determined to be very important for the stabilization of nanoparticles in solution but appears to be unnecessary for the formation of nanoparticles. Isolation and purification methods that produce a high yield of surfactant free particles have still not been perfected and additional testing will be necessary for improvement.¿