Micro-scale abrasion behaviour of electroless Ni-P-SiC coating on aluminium alloy

Electroless nickel (EN) and electroless nickel composite (ENC) coatings were deposited on aluminium alloy substrate, LM24. The micro abrasion test was conducted to study the wear behaviour of the coatings with the effect of SiC concentration. Microhardness of the coatings was tested also. The wear scars were analysed using optical microscope and scanning electron microscope (SEM). The wear resistance was found to be improved in composite coating that has higher microhardness as compared to particles free and the bare aluminium substrate. In as-deposited condition for the composite coating, the wear volume increases on increase in SiC percentage in the coating but is found to be minimum for lower SiC percentage. The increase in hardness on heat treatment at 400°C is due to the hardening or grain coarsening with the formation Ni3P.

A field and reactive transport model study of arsenic in a basaltic rock aquifer

The use of geothermal energy as a source for electricity and district heating has increased over recent decades. Dissolved As can be an important constituent of the geothermal fluids brought to the Earth's surface. Here the field application of laboratory measured adsorption coefficients of aqueous As species on basaltic glass surfaces is discussed. The mobility of As species in the basaltic aquifer in the Nesjavellir geothermal system, Iceland was modelled by the one-dimensional (1D) reactive transport model PHREEQC ver. 2, constrained by a long time series of field measurements with the chemical composition of geothermal effluent fluids, pH, Eh and, occasionally, Fe- and As-dissolved species measurements. Di-, tri- and tetrathioarsenic species (As(OH)S22-, AsS₃H^2-, AsS33- and As(SH)4-) were the dominant form of dissolved As in geothermal waters exiting the power plant (2.556μM total As) but converted to some extent to arsenite (H₃AsO₃) and arsenate HAsO42- oxyanions coinciding with rapid oxidation of S2- to S2O32- and finally to SO42- during surface runoff before feeding into a basaltic lava field with a total As concentration of 0.882μM following dilution with other surface waters. A continuous 25-a data set monitoring groundwater chemistry along a cross section of warm springs on the Lake Thingvallavatn shoreline allowed calibration of the 1D model. Furthermore, a series of ground water wells located in the basaltic lava field, provided access along the line of flow of the geothermal effluent waters towards the lake. The conservative ion Cl^- moved through the basaltic lava field (4100m) in less than10a but As was retarded considerably due to surface reactions and has entered a groundwater well 850m down the flow path as arsenate in accordance to the prediction of the 1D model. The 1D model predicted a complete breakthrough of arsenate in the year 2100. In a reduced system arsenite should be retained for about 1ka. © 2011 Elsevier Ltd.

Fermi level de-pinning of aluminium contacts to n-type germanium using thin atomic layer deposited layers

Fermi-level pinning of aluminium on n-type germanium (n-Ge) was reduced by insertion of a thin interfacial dielectric by atomic layer deposition. The barrier height for aluminium contacts on n-Ge was reduced from 0.7 eV to a value of 0.28 eV for a thin Al2O3 interfacial layer (∼2.8 nm). For diodes with an Al2O3 interfacial layer, the contact resistance started to increase for layer thicknesses above 2.8 nm. For diodes with a HfO2 interfacial layer, the barrier height was also reduced but the contact resistance increased dramatically for layer thicknesses above 1.5 nm.

PTEN deficiency promotes macrophage infiltration and hypersensitivity of prostate cancer to IAP antagonist/radiation combination therapy

PTEN loss is prognostic for patient relapse post-radiotherapy in prostate cancer (CaP). Infiltration of tumor-associated macrophages (TAMs) is associated with reduced disease-free survival following radical prostatectomy. However, the association between PTEN loss, TAM infiltration and radiotherapy response of CaP cells remains to be evaluated. Immunohistochemical and molecular analysis of surgically-resected Gleason 7 tumors confirmed that PTEN loss correlated with increased CXCL8 expression and macrophage infiltration. However PTEN status had no discernable correlation with expression of other inflammatory markers by CaP cells, including TNF-α. In vitro, exposure to conditioned media harvested from irradiated PTEN null CaP cells induced chemotaxis of macrophage-like THP-1 cells, a response partially attenuated by CXCL8 inhibition. Co-culture with THP-1 cells resulted in a modest reduction in the radio-sensitivity of DU145 cells. Cytokine profiling revealed constitutive secretion of TNF-α from CaP cells irrespective of PTEN status and IR-induced TNF-α secretion from THP-1 cells. THP-1-derived TNF-α increased NFκB pro-survival activity and elevated expression of anti-apoptotic proteins including cellular inhibitor of apoptosis protein-1 (cIAP-1) in CaP cells, which could be attenuated by pre-treatment with a TNF-α neutralizing antibody. Treatment with a novel IAP antagonist, AT-IAP, decreased basal and TNF-α-induced cIAP-1 expression in CaP cells, switched TNF-α signaling from pro-survival to pro-apoptotic and increased radiation sensitivity of CaP cells in co-culture with THP-1 cells. We conclude that targeting cIAP-1 can overcome apoptosis resistance of CaP cells and is an ideal approach to exploit high TNF-α signals within the TAM-rich microenvironment of PTEN-deficient CaP cells to enhance response to radiotherapy.

Aluminium toxicity in wheat and rye

Com o presente trabalho pretendeu-se determinar e compreender melhor quais os alvos do Alumínio (Al) nas plantas, e contribuir para um melhor entendimento dos mecanismos de tolerância presentes em genótipos com elevado grau de tolerância ao Al. O Al é um dos maiores constituintes do solo e torna-se biodisponível em solos com baixo pH. Nesses casos, a exposição ao Al afecta negativamente o crescimento das plantas conduzindo a uma diminuição da produção. Estes factos são especialmente visíveis nos cereais, sendo a exposição ao Al uma das principais causas das quebras de produção nestas espécies. O Capítulo I consiste numa revisão geral sobre a toxicidade do Al nas plantas, apontando os seus principais alvos. Apresenta também os mecanismos de resistência, que inclui Al-destoxificação externa e interna, em diferentes espécies. O Capítulo II aborda os estudos sobre a exposição de curto prazo ao Al em duas espécies de cereais: Triticum aestivum L. e Secale cereale L., tendo-se sempre utilizado um genótipo Al-tolerante e um Al-sensível para cada espécie. Este capítulo está dividido em três estudos: no Capítulo II.1 realça-se o efeito da exposição a 185 μM de Al no equilíbrio nutricional em trigo. Verificou-se que em ambos os genótipos (sensível e tolerante) o perfil de macro e micro nutrientes se alterou, tendo uma interferência negativa, sobretudo no nível de P, Mg e K. Além disso, registaram-se diferenças na diferenciação da endoderme consoante o grau de tolerância/sensibilidade do genótipo. No Capítulo II.2 apresenta-se uma visão mais abrangente dos efeitos da exposição a 185 μM de Al em trigo, incluindo parâmetros fisiológicos, estruturais, citológicos e genotóxicos. Demonstra-se, pela primeira vez, que a progressão do ciclo celular é diferentemente regulada, dependendo da tolerância/sensibilidade do genótipo e que, mesmo em zonas já diferenciadas da raiz a exposição ao Al leva à deposição de calose. O Capítulo II.3 aborda os efeitos da exposição de 1.1 mM de Al em centeio, numa perspectiva bastante alargada. Apresenta-se o desequilíbrio nutricional, sobretudo no genótipo sensível, assim como a translocação de Al para a parte aérea nesse mesmo genótipo. Analisa-se também o comportamento de ambos os genótipos no que se refere ao ciclo celular, diferenciação da endoderme, crescimento radicular, reservas de hidratos de carbono, entre outros. Os resultados apontam para estratégias bem definidas adoptadas pelo genótipo tolerante de forma a minimizar a acção do Al no sistema radicular. O Capítulo III compreende a exposição longa ao Al. Dois genótipos de centeio com diferentes graus de tolerância ao Al foram expostos a 1.11 mM e 1.85 mM de Al durante 21 dias, tendo sido usados dois pontos de amostragem (15 e 21 dias). Este capítulo está dividido em dois estudos: No Capítulo III. 1 analisamse os mecanismos antioxidantes (folhas e raízes) como resposta à exposição ao Al, dando-se especial atenção ao ciclo do ascorbato-glutationas. A exposição ao Al levou a stress oxidativo e a alterações na actividade de enzimas antioxidantes e no conteúdo de antioxidantes não-enzimáticos. Demonstra-se que os dois órgãos apresentam respostas diferentes à exposição ao Al e que a capacidade de sobreviver em ambientes ricos em Al depende da eficácia da resposta antioxidante. Para além disso, a resposta do ciclo ascorbato-glutationas parece estar dependente do tipo de órgão, grau de tolerância e do tempo de exposição ao Al. No Capítulo III. 2 analisam-se os efeitos da exposição ao Al na fotossíntese. Verificou-se que o Al afecta negativamente a taxa fotossintética em ambos os genótipos, embora as alterações que o Al provoca nas trocas gasosas e no Ciclo de Calvin sejam dependentes do genótipo. Verificou-se também que os danos no genótipo sensível surgem mais cedo do que no genótipo tolerante, mas que ambos apresentam susceptibilidade ao Al após exposição de longo termo. Por fim, no Capítulo IV são apresentadas as conclusões da Tese de Doutoramento.

Asymmetric rolling of 5182 aluminium alloy and interstitial free steel sheets

This Ph.D. research focuses on asymmetric rolling (ASR), as an alternative method for improving mechanical responses of aluminium-magnesium alloy and interstitial free (IF) steel regarding industrial requirements. Aluminium alloys are attractive materials in various industries due to their appropriate properties such as low density and corrosion resistance; however, their low formability has limited their applications. As formability of aluminium alloys can be improved through texture development, part of this dissertation is dedicated to producing the desired crystallographic texture with the ASR process. Two types of ASR (i.e. reverse and continuous asymmetric rolling) were investigated. The impact of shear deformation imposed by ASR processes on developing the desirable texture and consequently on mechanical behaviours was observed. The developed shear texture increased the normal and also planar anisotropy. Texture evolution during plastic deformation as well as induced mechanical behaviour were simulated using the “self-consistent” and Taylor models. Interstitial free (IF) steel was the second material selected in this dissertation. Since IF steel is one of the most often used materials in automotive industries it was chosen to investigate the effect of shear deformation through ASR on its properties. Two types of reverse and continuous asymmetric rolling were carried out to deform IF steel sheets. The results of optical microscopy and atomic force microscopy observations showed no significant difference between the grains’ morphology of asymmetric and conventionally rolled samples, whereas the obtained results of transmission electron microscopy indicated that fine and equiaxed dislocation cells were formed through the asymmetric rolling process. This structure is due to imposed shear deformation during the ASR process. Furthermore, the mechanical behaviour of deformed and annealed sheets was evaluated through uniaxial tensile tests. Results showed that at low thickness reductions (18%) the asymmetric rolled sample presented higher stress than that of the conventionally rolled sheet; while for higher thickness reductions (60%) the trend was reversed. The texture analyses indicated that intense rolling texture components which developed through 60% thickness reduction of conventional rolling cause a relatively higher stress; on the contrary the fine structure resulting from ASR appears to be the source of higher stress observed after pre-deformation of 18%.

Developmental Antecedents of Proactive and Reactive Rebelliousness: The Role of Parenting Style, Childhood Adversity, and Attachment

Adolescence is a time of developmental transition that for one in five young people is characterised by feelings of oppositionality, rebellion, and negativism. Despite the prevalent experience of teen turbulence and despite its significance within the phenomenological framework provided by reversal theory (RT), the childhood antecedents of rebelliousness in adolescence and adulthood have not been given extensive empirical attention within RT, although such work has been carried out using other constructs and theories. We examined recalled parenting style, childhood adversity, and attachment style in adulthood as correlates of proactive and reactive rebelliousness in a sample of 80 participants, aged 18 to 50 years. Each participant responded to a questionnaire package containing the revised Adult Attachment Scale, the Parental Bonding Instrument, the Childhood Experience of Care and Abuse Questionnaire, and the Negativism Dominance Scale. We found that paternal abusive parenting, followed by paternal parenting style, paternal neglect, and paternal antipathy were independently predictive of scores on proactive rebelliousness, the sensation-seeking form. Maternal and paternal indifferent parenting styles each were found to equivalently and independently predict scores on reactive rebelliousness, the interpersonal disaffection form. The results of this study suggest these two forms of rebelliousness may have distinctly different antecedents. A longitudinal study is needed to examine the potentially causal pathways that are suggested by the results of this cross-sectional research. We consider reversal theory explanations of these results and contrast them with complementary theoretical frameworks.

Optimisation of an aptamer-biosensor to detect C-reactive protein

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Engenharia de Recursos Naturais, Universidade do Algarve, 2009

Study of transcripts and reactive oxygen species involved in the defence responses of Quercus suber against Phytophthora cinnamomi

The present work has the merit of exploring an insight into the activation of defence genes of Quercus suber during response to infection by Phytophthora cinnamomi. Thus, cDNA-AFLP methodology was used to identify gene fragments differentially present in the mRNA profiles of host cells of micropropagated Q. suber plantlets roots infected with zoospores of P. cinnamomi at different post challenge time points. Six candidate genes were selected based on their interesting cDNA-AFLP expression patterns and homology to genes known to play a role in defence. These six genes encode a cinnamyl alcohol dehydrogenase 2 (QsCAD2), a protein disulphide isomerase (QsPDI), a CC-NBS-LRR resistance protein (QsRPc), thaumatin-like protein (QsTLP), chitinase (QsCHI) and a 1,3-beta glucanase (QsGLU). The current work has been successful in evaluation of the expression of these genes by qRT-PCR. Data analysis revealed that transcript levels of QsRPc, QsCHI, QsCAD2 and QsPDI increased during the early hours of inoculation, while transcript profiles of thaumatin-like protein showed decreasing. No expression was detected for 1,3-beta-glucanase (QsGLU). Furthermore, the choice of suitable reference genes in any new experimental system is absolutely crucial in qRT-PCR; for this reason in this study and for the first time a set of potential reference genes were analyzed and validated for qRT-PCR normalization in the patho-system Phytophthora-Q. suber. Four candidate reference genes polimerase II (QsRPII), eukaryotic translation initiation factor 5A(QsEIF-5A), b-tubulin (QsTUB) and a medium subunit family protein of Clathrin adaptor complexes (QsCACs) were evaluated to determine the most stable internal references in Q. suber. Analysis of stability of genes was carried out using Genex software. Results indicated all these four potential reference genes assumed stable expression. Data analysis revealed that QsRPII and QsCACs were the two most stable genes, while genes QsTUB and QsEIF-5A were the third and the fourth most stable gene, respectively. In this study, a plasmid-based quantitative PCR method was developed to measure P. cinnamomi colonization during infection process of Q. suber. Plasmid-based detection of P. cinnamomi showed a gradual accumulation of the pathogen DNA in cork oak root tips up to 24 h post infection. The higher increase in P. cinnamomi/plasmid DNA ratio occurred between 18 and 24 h. One of the primary objectives of this research was to study the effect of cinnamomins (elicitins secreted by P. cinnamomin) on inducing defence mechanism against the pathogen, as recent histological and ultra-structural studies showed that P. cinnamomi was restricted to the outer cortex root fragments pre-treated with capsicien and cryptogein, suggesting that elicitins can stimulate plant defence reactions against P. cinnamomi. To complement these studies and to have a clear view of the nature of the interaction, the role of cinnamomins in the production of the oxidative burst [ROS and ROS scavenging enzymes such as superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD)] and in the defence responses was evaluated. Cork oak seedlings were pretreated with alpha-cinnamomin and then inoculated with P. cinnamomi mycelia. Results showed a significant higher production of reactive oxygen species (ROS) (H2O2 and O2•-) in elicitin and non-elicitin treated roots in interaction with P. cinnamomi in comparison to the corresponding control. The plant group inoculated with the pathogen after cinnamomin treatment showed an earlier increase in H2O2 production but this was lower as compared with that group inoculated with P. cinnamomi alone. Also, in elicitin pre-treated group generally, a lower level of O2•− production during infection was observed as compared with inoculated roots with P. cinnamomi alone without elicitin treatment. Furthermore, in this study, we evaluated activities of antioxidant enzymes upon challenge with P. cinnamomi, with and without pretreatment with alpha cinnamomin. Results indicated that the activities of defense enzymes POD, SOD and CAT increased after P. cinnamomi inoculation when compared with those in the control group. Also, in the group treated with alpha-cinnamomin followed by P. cinnamomi inoculation, a higher level of enzymatic activities was detected as compared with elicitin non-treated group, which suggest the protective effect of alpha-cinnamomin against the pathogen due to higher elevated levels of defense enzymes POD, SOD and CAT during the infection period. Furthermore, a sensitive qPCR method was applied to measure the pathogen biomass in elicited and non-elicited Q. suber roots challenged with P. cinnamomi to elucidate the effect of cinnamomins on the colonization of P. cinnamomi. Plasmid-based quantification of P. cinnamomi showed a significant decrease in accumulation of the pathogen DNA in cork oak roots after treatment with alpha and beta-cinnamomins which attest the role of cinnamomins in promoting defense responses in cork oak against P. cinnamomi invasion.

Joint inversion of geophysical and hydrologic data during water infiltration

Tese de doutoramento, Ciências Geofísicas e da Geoinformação (Geofísica), Universidade de Lisboa, Faculdade de Ciências, 2014

Reactive power compensation by EPSO technique

This paper presents a methodology to address reactive power compensation using Evolutionary Particle Swarm Optimization (EPSO) technique programmed in the MATLAB environment. The main objective is to find the best operation point minimizing power losses with reactive power compensation, subjected to all operational constraints, namely full AC power flow equations, active and reactive power generation constraints. The methodology has been tested with the IEEE 14 bus test system demonstrating the ability and effectiveness of the proposed approach to handle the reactive power compensation problem.

Optimal dispatch with reactive power compensation by Genetic Algorithm

This paper presents a Unit Commitment model with reactive power compensation that has been solved by Genetic Algorithm (GA) optimization techniques. The GA has been developed a computational tools programmed/coded in MATLAB. The main objective is to find the best generations scheduling whose active power losses are minimal and the reactive power to be compensated, subjected to the power system technical constraints. Those are: full AC power flow equations, active and reactive power generation constraints. All constraints that have been represented in the objective function are weighted with a penalty factors. The IEEE 14-bus system has been used as test case to demonstrate the effectiveness of the proposed algorithm. Results and conclusions are dully drawn.