Produtividade da cana-de-açúcar fertirrigada com N e K via gotejamento subsuperficial

The objective of this work consisted in the study of the fertigation and subsurface drip irrigation in the sugarcane productivity, in the second and the third seasons and technological effects in the growth. The experiment was developed in the experimental area of the Agronomical Sciences Faculty, FCA/UNESP - Botucatu, Brazil. The drip pipe was installed at 30 cm of depth and under the plantation line of sugar cane RB 72454 variety. The fertigation treatment with the biggest dose presented the better yield, with 190.01 t ha(-1) and 168.80 t ha(-1) to the second and the third harvest, respectively. The fertigation did not modify the technological qualities of the sugarcane in the two studied seasons, and the irrigation provided 43.5% and 67.2% of increments in the production of stem, to the second and third cut, respectively.

Crescimento e produtividade de quatro variedades de cana-deaçúcar no quarto ciclo de cultivo

The sugarcane is a widely adapted species to tropical climate and has made key role in economic development in Southeast and Northeast. The ability to adapt in different environments can be evaluated through the growth analysis and yield. This study aimed to evaluate the growth and yield of four sugarcane varieties (RB92579 and SP79-1011, RB931530 and RB93509) in the third ratoon. The experiment was conducted at the CECA/UFAL, Rio Largo (28 degrees 02'09 '' S, 35 degrees 49'43 '' W and 127m). The experimental design was randomized blocks. Was evaluated monthly the number of plants, height, leaf area index and stem diameter. The quality of raw material, dry matter and yield were evaluated at 360 DAC. The data were subjected to analysis of variance and means compared to each other by Tukey test. The results showed that the maximum tillering occurred at 90 DAC for all varieties, and the RB92579 showed greater tillering and greater height at 360 DAC. The variety RB931530 had superior diameter than the others. The RB92579 and RB93509 were higher than the others on the sugar production, dry matter and yield, however, differed ech only on the matter. Varieties RB92579 and RB931530 had similar levels of Brix, PCC and ATR. Since this latter variable responsible for developing the pricing of sugarcane industry.

Production of reinforced composites with natural fibers for industrial applications - Extrusion and injection WPC

The aim of this work is to study the replacement of currently used thermoplastics by composites reinforced with vegetable fibers with several advantages, mainly better mechanical properties, low weight and competitive cost compared to its counterparts. Extrusion and injection molding processes were studied using polypropylene (PP) matrix. The raw materials used were sugar cane bagasse, elephant grass, wood, milk cartons and recycled polypropylene. The composites were tested for bending, tension, hardness and impact resistance, following ASTM standards. The results obtained were extremely positive since they proved that natural fibers as reinforcement can be an important alternative to replace talc and other fillers.

Cultivo orgânico sequencial de hortaliças com dois sistemas de irrigação e duas coberturas de solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eficácia do herbicida amicarbazone aplicado sobre a palha ou no solo no controle de plantas daninhas na cultura da cana-de-açúcar

A eficácia dos herbicidas no sistema de cana-crua é diretamente influenciada pela quantidade e distribuição de palha na área, bem como pela ocorrência da primeira chuva superior a 20 mm posterior à aplicação, uma vez que a palha é capaz de interceptar o herbicida antes que este atinja o solo. Nesse contexto, a presente pesquisa teve como objetivo avaliar a eficácia e o comportamento do herbicida amicarbazone no controle de plantas daninhas no sistema de cana-crua. Para isso, foi realizado um experimento em condições controladas, considerando diferentes doses de amicarbazone (D1 = 1,05 kg ha-1, D2 = 0,875 kg ha-1, D3 = 0,700 kg ha-1 e D4 = 0,525 kg ha-1) e situações de aplicação desse herbicida, a saber: sobre 5 t de palha ha-1, sobre o solo e coberto com 5 t de palha ha-1, além de pulverização sobre o solo sem cobertura de palha, resultando assim em 12 tratamentos. Aos 7, 14, 21 e 28 dias após a aplicação (DAA), foi avaliada a porcentagem de controle das seguintes espécies de plantas daninhas: Ipomoea grandifolia, Brachiaria decumbens, Merremia cissoides e Euphorbia heterophylla. Pelos resultados obtidos, pode-se constatar que, independentemente da espécie de planta daninha avaliada, os maiores índices de controle foram observados quando o amicarbazone foi aplicado sobre a palha, simulando-se em seguida precipitação correspondente a 30 mm de chuva, e nos tratamentos em que o herbicida foi aplicado diretamente no solo sem palha. Dessa forma, para as espécies I. grandifolia, M. cissoides e E. heterophylla, todos os tratamentos apresentaram excelente controle (nota 6 - 100%) a partir dos 14 DAA; para B. decumbens, o controle total ocorreu aos 28 DAA. Portanto, pode-se concluir que o amicarbazone é uma excelente alternativa para o manejo dessas espécies de plantas daninhas em cana-crua.

Efeito da adição de argila expandida e adições minerais na formulação de concretos estruturais leves autoadensáveis

The search for alternative materials with lower density, reduction in heat transfer and propagation of noise associated with the ease of handling and application in concrete structures, represents an enormous challenge in the formulation and knowledge of the performance of self-compacting lightweight concrete, which has technology little known nationally, and appears on the international scene as an innovative material and alternative to conventional concrete. Based on these, this study set out to study self-compacting lightweight concrete made with two distinct grades of expanded clay associated with the addition of plasticizing/superplasticizers additives and mineral additions of metakaolin and bagasse ash of sugar cane. There is also an object of study, evaluation of pozzolanic activity of mineral admixtures and their influence on the durability characteristics of concrete. The rheological, physical, mechanical and microstructural analysis in this study served as basis in the classification of concretes autoadensáveis, targeting the national technical requirements for their classification in the category autoadensável and lightweight structural. The inclusion of mineral admixtures (metakaolin and bagasse ash of sugar cane), partial replacement of cement, pozzolanic activity and demonstrated maintenance of mechanical properties through the filler effect, a reduction of up to 76% of the nitrogen gas permeability in blend with 20% bagasse ash. All concretes had rheology (cohesion and consistency) suitable for self-adensability as well as strength and density inherent structural lightweight concrete without presenting phenomena of segregation and exudation

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Efeito da adubação fosfata sobre o acúmulo de biomassa e teor de brix de duas variedades de cana-de-açúcar

The objective of this study was to evaluate the accumulation of matter, dry matter content of Brix and two varieties of sugar cane, influenced by the phosphorus cultivated on "Zona da Mata" region, State of Alagoas. The experiment, a factorial 2 x 6, was composed of two varieties of cane; RB867515 and RB92579 and six phosphorus levels: zero, 30, 60, 90, 120 and 150 kg ha(-1), with the source of the phosphorus triple superphosphate. Was also used nitrogen and potassium in doses equivalent to 100 and 200 kg ha(-1) and K, respectively. The soil of the experimental area was set to raise the base saturation to 60%. At the beginning of the first rainfall of the rainy season of 2006 was performed with micro fertilization in coverage, in doses equivalent to 6,0; 6,0 and 7,0 kg ha(-1) of Cu, Zn and Mn, respectively. Was The chemical control of weeds. Every month, from August to October 2006, samples were collected in the cane plant. There was initially the number of plants m(2), followed by weighing the material. It was subsequently withdrawn a subsample containing ten plants for weighing. After weighing the material was passed in horsemanship and homogenized, again drew up a sample of approximately 300g, leading them to forced ventilation oven at 65 degrees C, toobtain constant weight. Resulting in the production of natural (MN) and dry matter (DM). In July, we analyzed the levels of Brix% juice in the refractometer Brix. The average values of production of natural (MN), dry matter (DM) and contents of Brix% were subjected to analysis of variance and regression for variables. The accumulation of dry matter and were influenced by fertilization. The contents of Brix% in two varieties did not suffer significant influence of fertilization.

Feeding substrates to black coconut bunch weevil, Homalinotus coriaceus (Gyllenhal) (Coleoptera: Curculionidae), rearing in laboratory

A broca do cacho do coqueiro, Homalinotus coriaceus (Gyllenhal), é uma praga limitante da produção de coco no Brasil, sendo que tanto as larvas como os adultos provocam a queda das flores femininas e dos frutos imaturos, pela interceptação do fluxo de seiva ou pela alimentação direta nas estruturas reprodutivas. em virtude da escassez de informações sobre sua biologia, realizou-se esse trabalho com o objetivo de desenvolver uma metodologia mais adequada para a criação da praga em laboratório. Foram utilizados os parâmetros biológicos para avaliação e comparação dos sistemas de criação estudados.Toletes de cana-de-açúcar foram utilizados como substrato para alimentação dos adultos coletados no campo e obtenção dos ovos. As larvas foram criadas em três substratos alimentares no Laboratório de Entomologia da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)-CPATC (Centro de Pesquisa Agropecuária dos Tabuleiros Costeiros), em Aracaju, SE. Os substratos alimentares estudados foram: o mesocarpo do coco, dieta para criação da broca dos citros e dieta para criação da broca do olho do coqueiro, sendo esta a que proporcionou o melhor desenvolvimento larval num menor tempo, com boa viabilidade, maior facilidade no preparo e manutenção.

Seletividade de herbicidas aplicados em pré-emergência na cultura de cana-de-açúcar tratada com nematicidas

O objetivo do trabalho foi estudar a seletividade de herbicidas para a cultura da cana-de-açúcar quando aplicado em culturas tratadas com nematicidas. O experimento foi instalado em área pertencente à Usina São José, município de Borebi-SP, ano agrícola de 2000/01. A variedade de cana-de-açúcar utilizada foi a RB855113. Utilizou-se o delineamento experimental de blocos ao acaso em parcelas subdivididas, com quatro repetições. Cada parcela correspondeu a 27 linhas de 10,0 m, espaçadas em 1,0 m, sendo dividida em três subparcelas. As parcelas corresponderam aos tratamentos com os herbicidas, e as subparcelas, à aplicação ou não dos nematicidas carbofuran (2,10 kg ha-1) e terbufós 2,25 kg ha¹). Os herbicidas testados foram: tebuthiuron (1,12 kg ha-1), ametryne (1,75 kg ha¹), sulfentrazone (0,8 kg ha-1), metribuzin (1,92 kg ha-1), isoxaflutole (0,0525 kg ha¹), clomazone (1,25 kg ha¹), oxyfluorfen (0,36 kg ha-1) e azafenidin+hexazinone (0,1575 + 0,2025 kg ha-1), sendo todos aplicados em pré-emergência, além de uma parcela como testemunha. Os resultados obtidos evidenciaram que os herbicidas oxyfluorfen e azafenidin+hexazinone causaram os maiores níveis de fitotoxicidade na cana-de-açúcar, independentemente do uso dos nematicidas carbofuran e terbufós. Os herbicidas tebuthiuron, ametryne, sulfentrazone, metribuzin, isoxaflutole, clomazone, oxyfluorfen e azafenidin+hexazinone, aplicados em doses representativas das comercialmente utilizadas, mostraram-se seletivos à cana-de-açúcar, não afetando seu crescimento, sua produtividade e suas características tecnológicas. Os nematicidas não interferiram nos níveis de intoxicação provocados pelos herbicidas utilizados na cultura.

Teores de lignina e celulose em plantas de cana-de-açúcar em função da aplicação de maturadores

O objetivo deste trabalho foi avaliar os teores de lignina e celulose em plantas de cana-de-açúcar após a aplicação de dois maturadores para a colheita. O experimento foi conduzido em uma área de cana-soca, cultivar SP 803280, no município de Igaraçu do Tietê/SP. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. Os tratamentos constituíram-se da aplicação de dois maturadores: sulfometuron-methyl (Curavial) e glyphosate (Roundup original). As doses utilizadas foram: glyphosate a 72 g e.a. ha-1; glyphosate a 144 g e.a. ha-1 ; glyphosate a 72 g e.a. ha-1 + sulfometuron methyl a 10 g p.c. ha-1; glyphosate a 108 g e.a. ha-1 + sulfometuron-methyl a 12 g p.c. ha-1; sulfometuron-methyl a 20 g p.c. ha-1; e a testemunha sem aplicação de maturadores. As análises de lignina e celulose foram realizadas pelo método lignina em detergente ácido modificado. O glyphosate e o sulfometuron-methyl alteraram os níveis de lignina no momento da colheita, e esse efeito foi observado também durante o crescimento da cana-de-açúcar (meses após a aplicação desses produtos). O glyphosate a 72 g e.a. ha-1 promoveu reduções nos teores de lignina, na colheita e durante o crescimento da cana-de-açúcar, quando comparados com os da testemunha, enquanto o sulfometuron-methyl isolado na menor dose (10 g ha-1) promoveu aumento nos teores desse biopolímero na soqueira da cana-de-açúcar.

Aspectos da biologia e morfologia da broca do pedúnculo floral do coqueiro, Homalinotus coriaceus (Gyllenhal) (Coleoptera: Curculionidae)

A broca do pedúnculo floral do coqueiro, Homalinotus coriaceus (Gyllenhal), é uma praga limitante à produção de coco no Brasil, provocando a queda das flores e dos frutos imaturos. Sua biologia é pouco conhecida o que tem dificultado a seu manejo adequado no campo. Dessa forma, foi realizado o estudo da biologia desse inseto no Laboratório de Entomologia da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Tabuleiros Costeiros - CPATC, em Aracaju, SE, à temperatura de 25 ± 2°C, umidade relativa de 70% e fotofase de 12h. Para alimentação e oviposição dos adultos coletados no campo foram utilizados toletes de cana-de-açúcar como substrato, nos quais as fêmeas colocaram ovos individualizados, cujo período de incubação variou de seis a 14 dias. As larvas foram criadas no mesocarpo de coco, desenvolvendo-se em 144 dias em média, passando por cinco a sete ínstares. O período pupal médio foi de 31 dias. A longevidade do adulto variou de 303 a 695 dias para fêmeas e de 246 a 635 dias para machos, sendo o ciclo de ovo a adulto de 181,9 dias para fêmeas e 188,5 para machos. Foram observadas diferenças morfológicas nas pupas e nos adultos, que podem ser utilizadas para separação dos sexos. Ao contrário dos machos, as fêmeas apresentam, na fase de pupa, duas estruturas arredondadas e elevadas situadas na face ventral e final do abdome e, na fase adulta, o penúltimo tergito abdominal projeta-se sobre o último.

Qualidade tecnológica em diferentes porções do colmo e produtividade da cana-de-açúcar sob efeito de maturadores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da influência de pré-tratamentos de dois resíduos lignocelulósicos (bagaço do pedúnculo de caju e casca de coco) utilizados como substrato na indução à síntese de enzimas celulolíticas

Nowadays generation ethanol second, that t is obtained from fermentation of sugars of hydrolyses of cellulose, is gaining attention worldwide as a viable alternative to petroleum mainly for being a renewable resource. The increase of first generation ethanol production i.e. that obtained from sugar-cane molasses could lead to a reduction of lands sustainable for crops and food production. However, second generation ethanol needs technologic pathway for reduce the bottlenecks as production of enzymes to hydrolysis the cellulose to glucose i.e. the cellulases as well as the development of efficient biomass pretreatment and of low-cost. In this work Trichoderma reesei ATCC 2768 was cultivated under submerged fermentation to produce cellulases using as substrates waste of lignocellulosic material such as cashew apple bagasse as well as coconut bagasse with and without pretreatment. For pretreatment the bagasses were treated with 1 M NaOH and by explosion at high pressure. Enzyme production was carried out in shaker (temperature of 27ºC, 150 rpm and initial medium pH of 4.8). Results showed that T.reesei ATCC 2768 showed the higher cellulase production when the cashew apple bagasse was treated with 1M NaOH (2.160 UI/mL of CMCase and 0.215 UI/mL of FPase), in which the conversion of cellulose, in terms of total reducing sugars, was of 98.38%, when compared to pretreatment by explosion at high pressure (0.853 UI/mL of CMCase and 0.172 UI/mL of Fpase) showing a conversion of 47.39% of total reducing sugars. Cellulase production is lower for the medium containing coconut bagasse treated with 1M NaOH (0.480 UI/mL of CMcase and 0.073 UI/mL of FPase), giving a conversion of 49.5% in terms of total reducing sugars. Cashew apple bagasse without pretreatment showed cellulase activities lower (0.535 UI/mL of CMCase and 0,152 UI/mL of FPase) then pretreated bagasse while the coconut bagasse without pretreatment did not show any enzymatic activity. Maximum cell concentration was obtained using cashew nut bagasse as well as coconut shell bagasse treated with 1M NaOH, with 2.92 g/L and 1.97 g/L, respectively. These were higher than for the experiments in which the substrates were treated by explosion at high pressure, 1.93 g/L and 1.17 g/L. Cashew apple is a potential inducer for cellulolytic enzymes synthysis showing better results than coconut bagasse. Pretreatment improves the process for the cellulolytic enzyme production