História da propagação das citações originais do artigo do Journal of Quantitative Spectroscopy & Radiative Transfer 102/441/2006.

Neste artigo procuraremos descrever a história cronológica das citações originais (aquelas que os nomes dos autores aparecem apenas uma vez, portanto, excluídas as autocitações) da publicação do artigo: M. Cattani and J. M. F. Bassalo, Racemization, Chiral Stability and Weak Interactions, Journal of Quantitative Spectroscopy & Radiative Transfer 102, pp. 441-449, 2006 (CB: JQS&RT 102/441/2006). Para realizar essa história, usamos a WEB OF SCIENCE (acessado: 08/02/2013) disponibilizado pela CAPES/UFPA.

Quantitative analysis of photodynamic therapy effects in rat mammary tumor vascular density using image-pro plus software

Photodynamic therapy (PDT) is a treatment modality that has advanced rapidly in recent years. It causes tissue and vascular damage with the interaction of a photosensitizing agent (PS), light of a proper wavelength, and molecular oxygen. Evaluation of vessel damage usually relies on histopathology evaluation. Results are often qualitative or at best semi-quantitative based on a subjective system. The aim of this study was to evaluate, using CD31 immunohistochem- istry and image analysis software, the vascular damage after PDT in a well-established rodent model of chemically induced mammary tumor. Fourteen Sprague-Dawley rats received a single dose of 7,12-dimethylbenz(a)anthraxcene (80 mg/kg by gavage), treatment efficacy was evaluated by comparing the vascular density of tumors after treatment with Photogem® as a PS, intraperitoneally, followed by interstitial fiber optic lighting, from a diode laser, at 200 mW/cm and light dose of 100 J/cm directed against his tumor (7 animals), with a control group (6 animals, no PDT). The animals were euthanized 30 hours after the lighting and mammary tumors were removed and samples from each lesion were formalin-fixed. Immunostained blood vessels were quantified by Image Pro-Plus version 7.0. The control group had an average of 3368.6 ± 4027.1 pixels per picture and the treated group had an average of 779 ± 1242.6 pixels per area (P < 0.01), indicating that PDT caused a significant decrease in vascular density of mammary tumors. The combined immu- nohistochemistry using CD31, with selection of representative areas by a trained pathology, followed by quantification of staining using Image Pro-Plus version 7.0 system was a practical and robust methodology for vessel damage evalua- tion, which probably could be used to assess other antiangiogenic treatments.

Type Ia Supernova Cosmology : Quantitative Spectral Analysis

Type Ia supernovae have been successfully used as standardized candles to study the expansion history of the Universe. In the past few years, these studies led to the exciting result of an accelerated expansion caused by the repelling action of some sort of dark energy. This result has been confirmed by measurements of cosmic microwave background radiation, the large-scale structure, and the dynamics of galaxy clusters. The combination of all these experiments points to a “concordance model” of the Universe with flat large-scale geometry and a dominant component of dark energy. However, there are several points related to supernova measurements which need careful analysis in order to doubtlessly establish the validity of the concordance model. As the amount and quality of data increases, the need of controlling possible systematic effects which may bias the results becomes crucial. Also important is the improvement of our knowledge of the physics of supernovae events to assure and possibly refine their calibration as standardized candle. This thesis addresses some of those issues through the quantitative analysis of supernova spectra. The stress is put on a careful treatment of the data and on the definition of spectral measurement methods. The comparison of measurements for a large set of spectra from nearby supernovae is used to study the homogeneity and to search for spectral parameters which may further refine the calibration of the standardized candle. One such parameter is found to reduce the dispersion in the distance estimation of a sample of supernovae to below 6%, a precision which is comparable with the current lightcurve-based calibration, and is obtained in an independent manner. Finally, the comparison of spectral measurements from nearby and distant objects is used to test the possibility of evolution with cosmic time of the intrinsic brightness of type Ia supernovae.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

Influenza delle caratteristiche quali-quantitative della luce da fonti artificiali sulla fisio-morfologia di piante verdi per interior landscaping

La conoscenza delle esigenze luminose (intensità, spettro, durata minima, massima ed ottimale del fotoperiodo di illuminazione) e della tolleranza alle condizioni degli interni delle piante ad uso decorativo, è di fondamentale importanza per una giusta tecnica di progettazione (dimensionamento e dislocazione dei punti luce) dell’indoor plantscaping. Il lungo periodo di condizionamento al quale queste piante vengono sottoposte, caratterizzato principalmente dalla scarsa disponibilità di luce naturale e dagli alti livelli di concentrazione di CO2 determina una forte influenza sui processi morfo-fisiologici. Il presente studio analizza il fattore luminoso ed è articolato su più punti quali; • caratterizzazione della riposta fotosintetica all’intensità luminosa di 21 delle principali specie a fogliame decorativo comunemente utilizzate nella realizzazione degli spazi verdi indoor, per stabilire quali siano i minimi ed ottimali livelli di PAR tali da garantire una fotosintesi netta positiva e nel complesso le condizioni di maggior benessere per le piante; • quantificazione dell’incremento fotosintetico netto dovuto ad una maggior concentrazione di CO2 negli interni rispetto alla concentrazione CO2 atmosferica esterna, all’aumentare dell’ intensità luminosa artificiale sulle precedenti specie; • monitoraggio dell’andamento delle attività fotosintetiche durante il periodo di illuminazione di 8 ore comunemente utilizzato in un interno ad uso lavorativo, a PAR costante e variabile in Ficus elastica e Dieffenbachia picta, al fine di stabilire quali possano essere le durate e le modalità di somministrazione della luce per rendere massima la fotosintesi netta riducendo al minimo i consumi energetici dovuti all’accensione delle lampade; • valutazione della risposta morfo-fisiologica e fotosintetica a modificazioni dello spettro luminoso mediante l’uso di LED monocromatici colorati ad emissione nel bianco, blu e rosso in Ficus benjamina e Iresine herbistii al fine di stabilire se questo tipo di lampade possano essere utilizzate come fonte integrativa e/o sostitutiva nella realizzazione degli spazi verdi interni. Vengono analizzati il punto si compensazione alla luce (g), il punto di saturazione alla luce (s), l’efficienza quantica (AQE), il punto di respirazione al buio (Rd) e la fotosintesi netta massima (A max) per (Aglaonema commutatum, Asplenium nidus, Anthurium andreanum, Begonia rex, Calathea luoise, Calathea veitchiana, Calathea rufibarba, Calathea zebrina, Codiaeum variegatum, Cthenanthe oppenheimiana, Dieffenbakia picta, Ficus benjamina, Ficus elatica, Ficus longifolia, Fittonia verschaffeltii, Iresine herbistii, Philodendron erubescens, Philodendron pertusum, Potos aureus, Spathiphillum wallisi, Syngonium podophillum ) e classificate le specie in funzione di Amax in quattro categorie; A max < 2 µmol CO2 m-2 s-1, A max compresa tra 2 e 4 µmol CO2 m-2 s-1, Amax cpmpresa tra 4 e 6 µmol CO2 m-2 s-1, Amax > 6 µmol CO2 m-2 s-1, al fine di mettere in risalto la potenzialità fotosintetiche di ogni singola specie. I valori di PAR compresi tra (g) ed (s) forniscono le indicazioni sulle quali basarsi per scegliere una giusta lampada o dimensionare un punto luce per ogni singola specie e/o composizione. È stimata l’influenza di due livelli di concentrazione di CO2 ambientale (400 e 800 ppm) all’incrementare dell’intensità luminosa sul processo fotosintetico delle specie precedenti. Per quasi tutte le specie 800 ppm di CO2 non favoriscono nessun incremento all’attività fotosintetica ad eccezione di Ficus benjamina, Ficus elatica e Syngonium podophillum se non accompagnati da una disponibilità luminosa superiore alle 10 µmol m-2 s-1. Viene monitorato l’andamento dell’attività fotosintetica a PAR costante e variabile (intervallando periodi di 8 minuti a PAR 40 e 80) durante 8 ore di illuminazione su Ficus elastica e Dieffenbachia picta al fine di stabilire la miglior modalità di somministrazione della luce. La fotosintesi netta cumulativa per l’intera durata di illuminazione a PAR costante mostra un calo dopo alcune ore dall’attivazione in Dieffenbackia, e un andamento oscillatorio in Ficus. L’illuminazione alternata consente di raggiungere i quantitativi di CO2 organicata a 80 µmol m-2 s-1 di PAR, dopo 5 ore e mezza sia in Ficus che Dieffenbackia sebbene le potenzialità fotosintetiche delle due piante siano molto differenti. È stato valutato l’effetto dell’illuminazione artificiale mediante LED (15W) a luce bianca, blu e rossa monocromatica in rapporto alla luce neon(36W) bianca tradizionale (con differenti abbinamenti tra le lampade) sui principali parametri morfologici e fisiologici, in Ficus benjamin ‘Variegata’ e Iresine herbistii per verificare se tali fonti possono rappresentare una valida alternativa nella sostituzione o integrazione di altre lampade per gli spazi verdi indoor. Tutte le combinazioni LED indagate possono rappresentare un’alternativa di sostituzione alla coltivazione con neon ed un risparmio energetico di oltre il 50%. Una PAR di 20,6 µmol m-2 s-1 della singola lampada LED bianco è sufficiente per mantenere la pianta in condizioni di sopravvivenza con un consumo di 15W a fronte dei 36W necessari per il funzionamento di ogni neon. La combinazione LED bianco + LED blu monocromatico favorisce il contenimento della taglia della pianta, caratteristica gradita nella fase di utilizzo indoor, una maggior produzione di sostanza secca e un’attività fotosintetica più elevata.

Quantitative Untersuchungen zur mRNA-Expression verschiedener Neurotransmitterrezeptoren im Verlauf der neuronalen Entwicklung der Zellinie PCC7-Mz1

Die murine embryonale Karzinomazellinie PCC7-Mz1 stellt ein Modell neuronaler Entwicklung dar, da nach RA-Gabe eine Differenzierung in neuronale, gliale und fibroblastoide Phänotypen erfolgt. Um die Expression von Neurotransmitterrezeptoren während der neuronalen Entwicklung zu untersuchen, wurde in dieser Arbeit eine quantitative Analyse der Expression verschiedener Neurotransmitterrezeptoren im Verlauf der RA-induzierten Differenzierung der PCC7-Mz1 Zellen durchgeführt. Zu diesem Zweck wurde eine kompetitive RT-PCR eingesetzt. Als Kompetitor wurde ein synthetisches Gen ( SG) konstruiert, das sich aus den Antisense- und Sense-Primersequenzen zur spezifischen Amplifikation des Dopaminrezeptors D2, des Serotoninrezeptors 5HT3, der GABAA-Untereinheiten ß1 und ß3, der metabotropen Glutamatrezeptoren mGluR1 und mGluR5, der 5 NMDA-Rezeptoruntereinheiten 1,2a,2b,2c und 2d, der Markerproteine Synaptophysin und GFAP, und der Untereinheiten a3, a4 und a7 des nikotinischen Acetylcholinrezeptors zusammensetzt. Mit diesem SG erfolgten die Quantifizierungen der Rezeptor-mRNA im Sättigungsbereich der PCR. Die erhaltenen Transkriptmengen wurden auf ein Neuron bezogen, wodurch eine Korrelation zur neuronalen Entwicklung erfolgen konnte.

Quantitative Aspekte der Anziehungskraft von Straßenbeleuchtungen auf die Emergenz aus nahegelegenen Gewässern (Ephemeroptera, Plecoptera, Trichoptera, Diptera: Simuliidae, Chironomidae, Empididae) unter Berücksichtigung der spektralen Emission ve

Beim Beobachten von nächtlichen Insektenschwärmen an Straßenbeleuchtungen kommt es zur Frage, inwieweit von einer Bedrohung eines geordneten Naturkreislaufes durch dieses Phänomen gesprochen werden kann. Am Beispiel der bedrohten Artenvielfalt aquatischer Insekten im Bereich anthropogen bedingt verschmutzter Fließgewässer wurde die Problematik umfassend untersucht. Die Freilandtests erstreckten sich von Sommer 1998 bis Sommer 2000. Die vorliegende Arbeit geht mehreren Fragestellungen nach:1. - Wie hoch ist der Anteil aquatischer Insekten, der von dem Ort seiner Emergenz aus von einer naheliegenden Straßenlaterne angezogen wird ?2. - Welcher Lampentyp lockt weniger Insekten an: OSRAM HQL (Weiß-Mischlicht) oder PHILIPPS SON (gelbes Licht) ?3. - Welche Wellenlängenbereiche des Lichts sind beim Anflug an die Lampe von besonderer Präferenz ? zu 1. - Aquatische Insekten wiesen kein einheitliches Verhalten im Anflug an künstliches Licht auf. In den Sommermonaten kam es bei einigen Insektengruppen, wie z.B. den Trichopteren, zu einem massenhaften Anflug an die eine, im Untersuchungsgebiet aufgestellte Straßenlaterne. In dieser Zeit ergaben sich im Mittelwert Fangzahlen in einer Nacht am Licht, die der Emergenz von 25 Metern Bachufer/72 Stunden entsprachen. Bei den Dipteren ergab der mittlere Wert eine Emergenz von knapp 10 Metern Uferlänge/72 Stunden. Aufgrund hoher Fangzahlen konnten folgende Ergebnisse auf Artniveau bei den Chironomiden erzielt werden. Bei den zehn häufigsten Arten aus Emergenz und Lichtfang zeigten sich starke Schwankungen: Der Fang am Licht entsprach im Maximum einer Schlupfrate von 61 Metern Ufer/ 72 Stunden bei einer Art, bei einer anderen Art wurde z.B. ein Lichtfang erzielt, der lediglich die Emergenz von 0,3 Metern/72 Stunden umfaßte.zu 2. - In dem ohne Lichtkonkurrenz stattfindenden Vergleich zwischen PHILIPPS SON 70W und OSRAM HQL 125W ergab sich eine Fangrelation von 1:1,6 (SON:HQL). Bei einem Parallelfang (30 Metern Abstand der Leuchten) mit SON/HQL flogen wesentlich mehr Tiere an die HQL: Hier betrug die Relation 1:3,97 (SON:HQL). Es fand somit bei Lichtkonkurrenz eine Abwanderung der Insekten zur 'attraktiveren' Lampe statt.zu 3. - Zuletzt wurde die Anlockwirkung dreier Farbspektren mit den Intensitätsmaxima einer Wellenlänge von 437nm, 579nm und 599nm getestet. 437nm war die in der HQL gemessene Intensitätsspitze im niedrigwelligen Bereich und nach verbreiteter Auffassung von besonderer Anlockwirkung. Der Wellenlängenbereich um 579nm stellte das Intensitätsmaximum der SON-Lampe dar (gelbes Licht); 599nm war als Alternative für anlockschwache Beleuchtungen ausgewählt worden. Hier ergab sich bei abwechselndem Fang (ohne Lichtkonkurrenz) eine Fangrelation von 1,8 : 3,4 : 1 (437nm : 579nm : 599nm).

Quali-quantitative study of the phenolic and polyphenolic compounds and their antioxidant capacity in vegetal matrix processed with different technologies

Food technologies today mean reducing agricultural food waste, improvement of food security, enhancement of food sensory properties, enlargement of food market and food economies. Food technologists must be high-skilled technicians with good scientific knowledge of food hygiene, food chemistry, industrial technologies and food engineering, sensory evaluation experience and analytical chemistry. Their role is to apply the modern vision of science in the field of human nutrition, rising up knowledge in food science. The present PhD project starts with the aim of studying and improving frozen fruits quality. Freezing process in very powerful in preserve initial raw material characteristics, but pre-treatment before the freezing process are necessary to improve quality, in particular to improve texture and enzymatic activity of frozen foods. Osmotic Dehydration (OD) and Vacuum Impregnation (VI), are useful techniques to modify fruits and vegetables composition and prepare them to freezing process. These techniques permit to introduce cryo-protective agent into the food matrices, without significant changes of the original structure, but cause a slight leaching of important intrinsic compounds. Phenolic and polyphenolic compounds for example in apples and nectarines treated with hypertonic solutions are slightly decreased, but the effect of concentration due to water removal driven out from the osmotic gradient, cause a final content of phenolic compounds similar to that of the raw material. In many experiment, a very important change in fruit composition regard the aroma profile. This occur in strawberries osmo-dehydrated under vacuum condition or under atmospheric pressure condition. The increment of some volatiles, probably due to fermentative metabolism induced by the osmotic stress of hypertonic treatment, induce a sensory profile modification of frozen fruits, that in some way result in a better acceptability of consumer, that prefer treated frozen fruits to untreated frozen fruits. Among different processes used, a very interesting result was obtained with the application of a osmotic pre-treatment driven out at refrigerated temperature for long time. The final quality of frozen strawberries was very high and a peculiar increment of phenolic profile was detected. This interesting phenomenon was probably due to induction of phenolic biological synthesis (for example as reaction to osmotic stress), or to hydrolysis of polymeric phenolic compounds. Aside this investigation in the cryo-stabilization and dehydrofreezing of fruits, deeper investigation in VI techniques were carried out, as studies of changes in vacuum impregnated prickly pear texture, and in use of VI and ultrasound (US) in aroma enrichment of fruit pieces. Moreover, to develop sensory evaluation tools and analytical chemistry determination (of volatiles and phenolic compounds), some researches were bring off and published in these fields. Specifically dealing with off-flavour development during storage of boiled potato, and capillary zonal electrophoresis (CZE) and high performance liquid chromatography (HPLC) determination of phenolic compounds.

Quantitative evaluation of household nutrition patterns: an econometric assessment of the UK 5-a-day impact on fruit and vegetable consumption

The present work provides an ex-post assessment of the UK 5-a-day information campaign where the positive effects of information on consumption levels are disentangled from the potentially conflicting price dynamics. A model-based estimate of the counterfactual (no-intervention) scenario is computed using data from the Expenditure and Food Survey between 2002 and 2006. For this purpose fruit and vegetable demand is modelled employing Quadratic Almost Ideal Demand System (QUAIDS) specification with demographic effects and controlling for potential endogeneity of prices and total food expenditure.

Heterosis in maize (Zea mays, L.): characterization of heterotic quantitative trait loci (QTL) for agronomic traits in near isogenic lines (NILs) and their testcrosses

In a previous study on maize (Zea mays, L.) several quantitative trait loci (QTL) showing high dominance-additive ratio for agronomic traits were identified in a population of recombinant inbred lines derived from B73 × H99. For four of these mapped QTL, namely 3.05, 4.10, 7.03 and 10.03 according to their chromosome and bin position, families of near-isogenic lines (NILs) were developed, i.e., couples of homozygous lines nearly identical except for the QTL region that is homozygote either for the allele provided by B73 or by H99. For two of these QTL (3.05 and 4.10) the NILs families were produced in two different genetic backgrounds. The present research was conducted in order to: (i) characterize these QTL by estimating additive and dominance effects; (ii) investigate if these effects can be affected by genetic background, inbreeding level and environmental growing conditions (low vs. high plant density). The six NILs’ families were tested across three years and in three Experiments at different inbreeding levels as NILs per se and their reciprocal crosses (Experiment 1), NILs crossed to related inbreds B73 and H99 (Experiment 2) and NILs crossed to four unrelated inbreds (Experiment 3). Experiment 2 was conducted at two plant densities (4.5 and 9.0 plants m-2). Results of Experiments 1 and 2 confirmed previous findings as to QTL effects, with dominance-additive ratio superior to 1 for several traits, especially for grain yield per plant and its component traits; as a tendency, dominance effects were more pronounced in Experiment 1. The QTL effects were also confirmed in Experiment 3. The interactions involving QTL effects, families and plant density were generally negligible, suggesting a certain stability of the QTL. Results emphasize the importance of dominance effects for these QTL, suggesting that they might deserve further studies, using NILs’ families and their crosses as base materials.

Characterisation and field deployment of a novel quantitative Time-of-Flight Aerosol Mass Spectrometer (ToF-AMS)

Das Time-of-Flight Aerosol Mass Spectrometer (ToF-AMS) der Firma Aerodyne ist eine Weiterentwicklung des Aerodyne Aerosolmassenspektrometers (Q-AMS). Dieses ist gut charakterisiert und kommt weltweit zum Einsatz. Beide Instrumente nutzen eine aerodynamische Linse, aerodynamische Partikelgrößenbestimmung, thermische Verdampfung und Elektronenstoß-Ionisation. Im Gegensatz zum Q-AMS, wo ein Quadrupolmassenspektrometer zur Analyse der Ionen verwendet wird, kommt beim ToF-AMS ein Flugzeit-Massenspektrometer zum Einsatz. In der vorliegenden Arbeit wird anhand von Laborexperimenten und Feldmesskampagnen gezeigt, dass das ToF-AMS zur quantitativen Messung der chemischen Zusammensetzung von Aerosolpartikeln mit hoher Zeit- und Größenauflösung geeignet ist. Zusätzlich wird ein vollständiges Schema zur ToF-AMS Datenanalyse vorgestellt, dass entwickelt wurde, um quantitative und sinnvolle Ergebnisse aus den aufgenommenen Rohdaten, sowohl von Messkampagnen als auch von Laborexperimenten, zu erhalten. Dieses Schema basiert auf den Charakterisierungsexperimenten, die im Rahmen dieser Arbeit durchgeführt wurden. Es beinhaltet Korrekturen, die angebracht werden müssen, und Kalibrationen, die durchgeführt werden müssen, um zuverlässige Ergebnisse aus den Rohdaten zu extrahieren. Beträchtliche Arbeit wurde außerdem in die Entwicklung eines zuverlässigen und benutzerfreundlichen Datenanalyseprogramms investiert. Dieses Programm kann zur automatischen und systematischen ToF-AMS Datenanalyse und –korrektur genutzt werden.

Automated Segmentation and Non-Rigid Registration for the Quantitative Evaluation of Myocardial Perfusion from Magnetic Resonance Images

Myocardial perfusion quantification by means of Contrast-Enhanced Cardiac Magnetic Resonance images relies on time consuming frame-by-frame manual tracing of regions of interest. In this Thesis, a novel automated technique for myocardial segmentation and non-rigid registration as a basis for perfusion quantification is presented. The proposed technique is based on three steps: reference frame selection, myocardial segmentation and non-rigid registration. In the first step, the reference frame in which both endo- and epicardial segmentation will be performed is chosen. Endocardial segmentation is achieved by means of a statistical region-based level-set technique followed by a curvature-based regularization motion. Epicardial segmentation is achieved by means of an edge-based level-set technique followed again by a regularization motion. To take into account the changes in position, size and shape of myocardium throughout the sequence due to out of plane respiratory motion, a non-rigid registration algorithm is required. The proposed non-rigid registration scheme consists in a novel multiscale extension of the normalized cross-correlation algorithm in combination with level-set methods. The myocardium is then divided into standard segments. Contrast enhancement curves are computed measuring the mean pixel intensity of each segment over time, and perfusion indices are extracted from each curve. The overall approach has been tested on synthetic and real datasets. For validation purposes, the sequences have been manually traced by an experienced interpreter, and contrast enhancement curves as well as perfusion indices have been computed. Comparisons between automatically extracted and manually obtained contours and enhancement curves showed high inter-technique agreement. Comparisons of perfusion indices computed using both approaches against quantitative coronary angiography and visual interpretation demonstrated that the two technique have similar diagnostic accuracy. In conclusion, the proposed technique allows fast, automated and accurate measurement of intra-myocardial contrast dynamics, and may thus address the strong clinical need for quantitative evaluation of myocardial perfusion.

Quantitative differential proteomics for analysis of posttranslational modifications of proteins

In this work we developed a new and convenient method for high resolution IEF of proteins, which we termed: “daisy chain”. Usually an IEF is accomplished with IPG strips of a desired pH range. For high resolution focusing we are using strips with pH range, which covers only one or two pH units. Thereby the pro-teins, which have isoelectrical point outside of this pH range, are lost. We evalu-ated commercially available IPG strips with consecutive or overlapping pH ranges and connected them serially acidic to basic end, to construct in this way a high resolution IEF-system. For the first time, we showed that a high resolution IEF is possible in such a system and that results were by no means worse than those obtained when the same sample was analyzed on individual single IPGs. The great advantage of our system is that amount of sample used in serial IPG IEF is explicitly lower than when same sample was analyzed on individual single IPGs. This method was subsequently successfully applied to valuable clinical samples from cancer patients and to mitochondrial preparations related to a European project in gerontology. We thus developed a suite of experimental strategies, which adequately address complex biological situations, in particular on the level of protein expression.