The electron transfer complex between nitrous oxide reductase and its electron donors

J Biol Inorg Chem (2011) 16:1241–1254 DOI 10.1007/s00775-011-0812-9

Nursing Home-Acquired Pneumonia Presenting at the Emergency Department

Nursing home-acquired pneumonia (NHAP) is one of the most common infections arising amongst nursing home residents, and its incidence is expected to increase as population ages. The NHAP recommendation for empiric broad-spectrum antibiotic therapy, arising from the concept of healthcare-associated pneumonia, has been challenged by recent studies reporting low rates of multidrug-resistant (MDR) bacteria. This single center study analyzes the results of NHAP patients admitted through the Emergency Department (ED) at a tertiary center during the year 2010. There were 116 cases, male gender corresponded to 34.5 % of patients and median age was 84 years old (IQR 77-90). Comorbidities were present in 69.8 % of cases and 48.3 % of patients had used healthcare services during the previous 90 days. In-hospital mortality rate was 46.6 % and median length-of-stay was 9 days. Severity assessment at the Emergency Department provided CURB65 index score and respective mortality (%) results: zero: n = 0; one: n = 7 (0 %); two: n = 18 (38.9 %); three: n = 26 (38.5 %); four: n = 30 (53.3 %); and five; n = 22 (68.2 %); and sepsis n = 50 (34.0 %), severe sepsis n = 43 (48.8 %) and septic shock n = 22 (72.7 %). Significant risk factors for in-hospital mortality in multivariate analysis were polypnea (p = 0.001), age ≥ 75 years (p = 0.02), and severe sepsis or shock (p = 0.03) at the ED. Microbiological testing in 78.4 % of cases was positive in 15.4 % (n = 15): methicillin-resistant Staphylococcus aureus (26.7 %), Pseudomonas aeruginosa (20.0 %), S. pneumoniae (13.3 %), Escherichia coli (13.3 %), others (26.7 %); the rate of MDR bacteria was 53.3 %. This study reveals high rates of mortality and MDR bacteria among NHAP hospital admissions supporting the use of empirical broad-spectrum antibiotic therapy in these patients.

Production of bacterial biopolymers from industrial fat-containing wastes

Dissertation presented in partial fulfilment of the Requirements for the Degree of Master in Biotechnology

Production of polyhydroxyalkanoates from oil-containing substrates

Different oil-containing substrates, namely, used cooking oil (UCO), fatty acids-byproduct from biodiesel production (FAB) and olive oil deodorizer distillate (OODD) were tested as inexpensive carbon sources for the production of polyhydroxyalkanoates (PHA) using twelve bacterial strains, in batch experiments. The OODD and FAB were exploited for the first time as alternative substrates for PHA production. Among the tested bacterial strains, Cupriavidus necator and Pseudomonas resinovorans exhibited the most promising results, producing poly-3-hydroxybutyrate, P(3HB), form UCO and OODD and mcl-PHA mainly composed of 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD) monomers from OODD, respectively. Afterwards, these bacterial strains were cultivated in bioreactor. C. necator were cultivated in bioreactor using UCO as carbon source. Different feeding strategies were tested for the bioreactor cultivation of C. necator, namely, batch, exponential feeding and DO-stat mode. The highest overall PHA productivity (12.6±0.78 g L-1 day-1) was obtained using DO-stat mode. Apparently, the different feeding regimes had no impact on polymer thermal properties. However, differences in polymer‟s molecular mass distribution were observed. C. necator was also tested in batch and fed-batch modes using a different type of oil-containing substrate, extracted from spent coffee grounds (SCG) by super critical carbon dioxide (sc-CO2). Under fed-batch mode (DO-stat), the overall PHA productivity were 4.7 g L-1 day-1 with a storage yield of 0.77 g g-1. Results showed that SCG can be a bioresource for production of PHA with interesting properties. Furthermore, P. resinovorans was cultivated using OODD as substrate in bioreactor under fed-batch mode (pulse feeding regime). The polymer was highly amorphous, as shown by its low crystallinity of 6±0.2%, with low melting and glass transition temperatures of 36±1.2 and -16±0.8 ºC, respectively. Due to its sticky behavior at room temperature, adhesiveness and mechanical properties were also studied. Its shear bond strength for wood (67±9.4 kPa) and glass (65±7.3 kPa) suggests it may be used for the development of biobased glues. Bioreactor operation and monitoring with oil-containing substrates is very challenging, since this substrate is water immiscible. Thus, near-infrared spectroscopy (NIR) was implemented for online monitoring of the C. necator cultivation with UCO, using a transflectance probe. Partial least squares (PLS) regression was applied to relate NIR spectra with biomass, UCO and PHA concentrations in the broth. The NIR predictions were compared with values obtained by offline reference methods. Prediction errors to these parameters were 1.18 g L-1, 2.37 g L-1 and 1.58 g L-1 for biomass, UCO and PHA, respectively, which indicates the suitability of the NIR spectroscopy method for online monitoring and as a method to assist bioreactor control. UCO and OODD are low cost substrates with potential to be used in PHA batch and fed-batch production. The use of NIR in this bioprocess also opened an opportunity for optimization and control of PHA production process.

Fitness correlates with the extent of cheating in a bacterium.

There is growing awareness of the importance of cooperative behaviours in microbial communities. Empirical support for this insight comes from experiments using mutant strains, termed 'cheats', which exploit the cooperative behaviour of wild-type strains. However, little detailed work has gone into characterising the competitive dynamics of cooperative and cheating strains. We test three specific predictions about the fitness consequences of cheating to different extents by examining the production of the iron-scavenging siderophore molecule, pyoverdin, in the bacterium Pseudomonas aeruginosa. We create a collection of mutants that differ in the amount of pyoverdin that they produce (from 1% to 96% of the production of paired wild types) and demonstrate that these production levels correlate with both gene activity and the ability to bind iron. Across these mutants, we found that (1) when grown in a mixed culture with a cooperative wild-type strain, the relative fitness of a mutant is negatively correlated with the amount of pyoverdin that it produces; (2) the absolute and relative fitness of the wild-type strain in the mixed culture is positively correlated with the amount of pyoverdin that the mutant produces; and (3) when grown in a monoculture, the absolute fitness of the mutant is positively correlated with the amount of pyoverdin that it produces. Overall, we demonstrate that cooperative pyoverdin production is exploitable and illustrate how variation in a social behaviour determines fitness differently, depending on the social environment.

Promise for plant pest control: root-associated pseudomonads with insecticidal activities.

Insects are an important and probably the most challenging pest to control in agriculture, in particular when they feed on belowground parts of plants. The application of synthetic pesticides is problematic owing to side effects on the environment, concerns for public health and the rapid development of resistance. Entomopathogenic bacteria, notably Bacillus thuringiensis and Photorhabdus/Xenorhabdus species, are promising alternatives to chemical insecticides, for they are able to efficiently kill insects and are considered to be environmentally sound and harmless to mammals. However, they have the handicap of showing limited environmental persistence or of depending on a nematode vector for insect infection. Intriguingly, certain strains of plant root-colonizing Pseudomonas bacteria display insect pathogenicity and thus could be formulated to extend the present range of bioinsecticides for protection of plants against root-feeding insects. These entomopathogenic pseudomonads belong to a group of plant-beneficial rhizobacteria that have the remarkable ability to suppress soil-borne plant pathogens, promote plant growth, and induce systemic plant defenses. Here we review for the first time the current knowledge about the occurrence and the molecular basis of insecticidal activity in pseudomonads with an emphasis on plant-beneficial and prominent pathogenic species. We discuss how this fascinating Pseudomonas trait may be exploited for novel root-based approaches to insect control in an integrated pest management framework.

Synthesis of medium-chain-length polyhydroxyalkanoates in arabidopsis thaliana using intermediates of peroxisomal fatty acid beta-oxidation.

Polyhydroxyalkanoate (PHA) is a family of polymers composed primarily of R-3-hydroxyalkanoic acids. These polymers have properties of biodegradable thermoplastics and elastomers. Medium-chain-length PHAs (MCL-PHAs) are synthesized in bacteria by using intermediates of the beta-oxidation of alkanoic acids. To assess the feasibility of producing MCL-PHAs in plants, Arabidopsis thaliana was transformed with the PhaC1 synthase from Pseudomonas aeruginosa modified for peroxisome targeting by addition of the carboxyl 34 amino acids from the Brassica napus isocitrate lyase. Immunocytochemistry demonstrated that the modified PHA synthase was appropriately targeted to leaf-type peroxisomes in light-grown plants and glyoxysomes in dark-grown plants. Plants expressing the PHA synthase accumulated electron-lucent inclusions in the glyoxysomes and leaf-type peroxisomes, as well as in the vacuole. These inclusions were similar to bacterial PHA inclusions. Analysis of plant extracts by GC and mass spectrometry demonstrated the presence of MCL-PHA in transgenic plants to approximately 4 mg per g of dry weight. The plant PHA contained saturated and unsaturated 3-hydroxyalkanoic acids ranging from six to 16 carbons with 41% of the monomers being 3-hydroxyoctanoic acid and 3-hydroxyoctenoic acid. These results indicate that the beta-oxidation of plant fatty acids can generate a broad range of R-3-hydroxyacyl-CoA intermediates that can be used to synthesize MCL-PHAs.

A New Large-DNA-Fragment Delivery System Based on Integrase Activity from an Integrative and Conjugative Element.

During the past few decades, numerous plasmid vectors have been developed for cloning, gene expression analysis, and genetic engineering. Cloning procedures typically rely on PCR amplification, DNA fragment restriction digestion, recovery, and ligation, but increasingly, procedures are being developed to assemble large synthetic DNAs. In this study, we developed a new gene delivery system using the integrase activity of an integrative and conjugative element (ICE). The advantage of the integrase-based delivery is that it can stably introduce a large DNA fragment (at least 75 kb) into one or more specific sites (the gene for glycine-accepting tRNA) on a target chromosome. Integrase recombination activity in Escherichia coli is kept low by using a synthetic hybrid promoter, which, however, is unleashed in the final target host, forcing the integration of the construct. Upon integration, the system is again silenced. Two variants with different genetic features were produced, one in the form of a cloning vector in E. coli and the other as a mini-transposable element by which large DNA constructs assembled in E. coli can be tagged with the integrase gene. We confirmed that the system could successfully introduce cosmid and bacterial artificial chromosome (BAC) DNAs from E. coli into the chromosome of Pseudomonas putida in a site-specific manner. The integrase delivery system works in concert with existing vector systems and could thus be a powerful tool for synthetic constructions of new metabolic pathways in a variety of host bacteria.

Pathogen-induced hatching and population-specific life-history response to water-borne cues in brown trout (Salmo trutta)

Hatching is an important niche shift, and embryos in a wide range of taxa can either accelerate or delay this life-history switch in order to avoid stage-specific risks. Such behavior can occur in response to stress itself and to chemical cues that allow anticipation of stress. We studied the genetic organization of this phenotypic plasticity and tested whether there are differences among populations and across environments in order to learn more about the evolutionary potential of stress-induced hatching. As a study species, we chose the brown trout (Salmo trutta; Salmonidae). Gametes were collected from five natural populations (within one river network) and used for full-factorial in vitro fertilizations. The resulting embryos were either directly infected with Pseudomonas fluorescens or were exposed to waterborne cues from P. fluorescens-infected conspecifics. We found that direct inoculation with P. fluorescens increased embryonic mortality and induced hatching in all host populations. Exposure to waterborne cues revealed population-specific responses. We found significant additive genetic variation for hatching time, and genetic variation in trait plasticity. In conclusion, hatching is induced in response to infection and can be affected by waterborne cues of infection, but populations and families differ in their reaction to the latter.

MHC class I expression dependent on bacterial infection and parental factors in whitefish embryos (Salmonidae).

Ecological conditions can influence not only the expression of a phenotype, but also the heritability of a trait. As such, heritable variation for a trait needs to be studied across environments. We have investigated how pathogen challenge affects the expression of MHC genes in embryos of the lake whitefish Coregonus palaea. In order to experimentally separate paternal (i.e. genetic) from maternal and environmental effects, and determine whether and how stress affects the heritable variation for MHC expression, embryos were produced in full-factorial in vitro fertilizations, reared singly, and exposed at 208 degree days (late-eyed stage) to either one of two strains of Pseudomonas fluorescens that differ in their virulence characteristics (one increased mortality, while both delayed hatching time). Gene expression was assessed 48 h postinoculation, and virulence effects of the bacterial infection were monitored until hatching. We found no evidence of MHC class II expression at this stage of development. MHC class I expression was markedly down-regulated in reaction to both pseudomonads. While MHC expression could not be linked to embryo survival, the less the gene was expressed, the earlier the embryos hatched within each treatment group, possibly due to trade-offs between immune function and developmental rate or further factors that affect both hatching timing and MHC expression. We found significant additive genetic variance for MHC class I expression in some treatments. That is, changes in pathogen pressures could induce rapid evolution in MHC class I expression. However, we found no additive genetic variance in reaction norms in our study population.

Adult native septic arthritis: a review of 10 years of experience and lessons for empirical antibiotic therapy.

Objectives To review the epidemiology of native septic arthritis to establish local guidelines for empirical antibiotic therapy as part of an antibiotic stewardship programme. Methods We conducted a 10 year retrospective study based on positive synovial fluid cultures and discharge diagnosis of septic arthritis in adult patients. Microbiology results and medical records were reviewed. Results Between 1999 and 2008, we identified 233 episodes of septic arthritis. The predominant causative pathogens were methicillin-susceptible Staphylococcus aureus (MSSA) and streptococci (respectively, 44.6% and 14.2% of cases). Only 11 cases (4.7%) of methicillin-resistant S. aureus (MRSA) arthritis were diagnosed, among which 5 (45.5%) occurred in known carriers. For large-joint infections, amoxicillin/clavulanate or cefuroxime would have been appropriate in 84.5% of cases. MRSA and Mycobacterium tuberculosis would have been the most frequent pathogens that would not have been covered. In contrast, amoxicillin/clavulanate would have been appropriate for only 75.3% of small-joint infections (82.6% if diabetics are excluded). MRSA and Pseudomonas aeruginosa would have been the main pathogens not covered. Piperacillin/tazobactam would have been appropriate in 93.8% of cases (P < 0.01 versus amoxicillin/clavulanate). This statistically significant advantage is lost after exclusion of diabetics (P = 0.19). Conclusions Amoxicillin/clavulanate or cefuroxime would be adequate for empirical coverage of large-joint septic arthritis in our area. A broad-spectrum antibiotic would be significantly superior for small-joint infections in diabetics. Systematic coverage of MRSA is not justified, but should be considered for known carriers. These recommendations are applicable to our local setting. They might also apply to hospitals sharing the same epidemiology.

Toxicity assessment of refill liquids for electronic cigarettes.

We analyzed 42 models from 14 brands of refill liquids for e-cigarettes for the presence of micro-organisms, diethylene glycol, ethylene glycol, hydrocarbons, ethanol, aldehydes, tobacco-specific nitrosamines, and solvents. All the liquids under scrutiny complied with norms for the absence of yeast, mold, aerobic microbes, Staphylococcus aureus, and Pseudomonas aeruginosa. Diethylene glycol, ethylene glycol and ethanol were detected, but remained within limits authorized for food and pharmaceutical products. Terpenic compounds and aldehydes were found in the products, in particular formaldehyde and acrolein. No sample contained nitrosamines at levels above the limit of detection (1 μg/g). Residual solvents such as 1,3-butadiene, cyclohexane and acetone, to name a few, were found in some products. None of the products under scrutiny were totally exempt of potentially toxic compounds. However, for products other than nicotine, the oral acute toxicity of the e-liquids tested seems to be of minor concern. However, a minority of liquids, especially those with flavorings, showed particularly high ranges of chemicals, causing concerns about their potential toxicity in case of chronic oral exposure.

Diagnostic microbiologique de la pneumonie [Microbiological diagnosis of pneumonia].

Les pneumonies causent une mortalité et une morbidité significatives. De manière simplifiée, deux types de pneumonie sont décrits : la pneumonie communautaire et la pneumonie nosocomiale avec le pneumocoque et l'Haemophilus influenzae comme causes principales pour la première, le Pseudomonas et diverses entérobactéries pour la deuxième. La réalité est cependant plus complexe puisque l'on distingue aussi la pneumonie d'aspiration par exemple. La culture est très importante dans le cas des pneumonies nosocomiales car elle permet de déterminer la sensibilité aux antibiotiques de l'agent infectieux et d'adapter le traitement. Pour les patients immunosupprimés, le diagnostic différentiel est plus large et la recherche par tests moléculaires de certains virus, de champignons filamenteux et du Pneumocystis peut se révéler informative. Pneumonia is an importance cause of mortality and morbidity in adults. Two types of pneumonia are defined: community-acquired and nosocomial pneumonia with their corresponding etiology such as pneumococci or Haemophilus influenzae and Pseudomonas or enterobacteriaceae, respectively. However, the reality is more complex with aspiration pneumonia, pneumonia in immunocompromised patient, and pneumonia in ventilated patients. Culture in the case of nosocomial pneumonia is especially important to obtain the antibiotic susceptibility of the infectious agent and to adjust therapy. Moreover for immunocompromised patients, the differential diagnosis is much wider looking for viruses, filamentous fungi and Pneumocystis can be very informative, using new molecular assays.

Development and evaluation of double locus sequence typing for molecular epidemiological investigations of Clostridium difficile.

Despite the development of novel typing methods based on whole genome sequencing, most laboratories still rely on classical molecular methods for outbreak investigation or surveillance. Reference methods for Clostridium difficile include ribotyping and pulsed-field gel electrophoresis, which are band-comparing methods often difficult to establish and which require reference strain collections. Here, we present the double locus sequence typing (DLST) scheme as a tool to analyse C. difficile isolates. Using a collection of clinical C. difficile isolates recovered during a 1-year period, we evaluated the performance of DLST and compared the results to multilocus sequence typing (MLST), a sequence-based method that has been used to study the structure of bacterial populations and highlight major clones. DLST had a higher discriminatory power compared to MLST (Simpson's index of diversity of 0.979 versus 0.965) and successfully identified all isolates of the study (100 % typeability). Previous studies showed that the discriminatory power of ribotyping was comparable to that of MLST; thus, DLST might be more discriminatory than ribotyping. DLST is easy to establish and provides several advantages, including absence of DNA extraction [polymerase chain reaction (PCR) is performed on colonies], no specific instrumentation, low cost and unambiguous definition of types. Moreover, the implementation of a DLST typing scheme on an Internet database, such as that previously done for Staphylococcus aureus and Pseudomonas aeruginosa ( http://www.dlst.org ), will allow users to easily obtain the DLST type by submitting directly sequencing files and will avoid problems associated with multiple databases.

Diversity among bacteria causing blotch disease on the commercial mushroom, agaricus bisporus /

A total of 251 bacterial isolates were isolated from blotched mushroom samples obtained from various mushroom farms in Canada. Out of 251 stored isolates, 170 isolates were tested for pathogenicity on Agaricus bisporus through mushroom rapid pitting test with three distinct pathotypes observed: dark brown, brovm and yellow/yellow-brown blotch. Phenotypic analysis of 83 isolates showed two distinct proteinase K resistant peptide profiles. Profile group A isolates exhibited peptides with masses of 45, 18, 16 and 14 kDa and fiirther biochemical tests identified them as Pseudomonasfluorescens III and V. Profile group B isolates lacked the 16-kDa peptide and the blotch causing bacterial isolates of this group was identified as Serratia liquefaciens and Cedecea davisae. Comparative genetic analysis using Amplified Fragment Length Polymorphism (AFLP) on 50 Pseudomonas sp. isolates (Group A) showed that various blotch symptoms were caused by isolates distributed throughout the Pseudomonas sp. clusters with the exception of the Pseudomonas tolaasii group and one non-pathogenic Pseudomonas fluorescens cluster. These results show that seven distinct Pseudomonas sp. genotypes (genetic clusters) have the ability to cause various symptoms of blotch and that AFLP can discriminate blotch causing from non-blotch causing Pseudomonasfluorescens. Therefore, a complex of diverse bacterial organisms causes bacterial blotch disease