Biodiversidade e dinâmica estrutural de assembleias de esponjas marinhas (Filo Porifera) da Ilha Grande e cercanias, Rio de Janeiro, Brasil

Estudos de comunidades de esponjas marinhas são escassos no Brasil, sendo este trabalho pioneiro nessa abordagem para a Ilha Grande - RJ, um local de alta diversidade biológica. A estrutura das assembleias de esponjas marinhas e da comunidade bentônica marinha séssil foi avaliada, a partir de índices descritores de diversidade, em seis pontos da Ilha Grande e ilhas próximas, sendo três do lado continental e três do lado oceânico. As assembleias foram comparadas entre os diferentes lado e profundidade, através da contagem do número de indivíduos e área de cobertura por foto-quadrados. Paralelamente, as esponjas foram coletadas, fixadas e posteriormente identificadas através de metodologia e literatura especializada. Foi encontrado um total de 5.457 indivíduos, representando as Classes Demospongiae e Calcarea, distribuídos em 41 espécies e nove morfotipos, indicando maior diversidade para Lagoa Azul e menor para Parnaióca, sendo o local com maior riqueza a Ilha do Abraão. Dentre as espécies identificadas, quatro dominaram mais de 50% do total e 26 não alcançaram nem 5% da abundância absoluta. Análises de variância por GLM só evidenciaram diferença significativa para profundidade com substratos diferentes (F= 2,79; p<0,04), enquanto o fator lado (F= 2,23; p>0,16) e a interação entre os fatores (F= 1,17; p>0,38) não tiveram diferença estatística. As análises multivariadas de ordenação Cluster e MDS indicaram a formação de quatro assembleias de esponjas: 1) quatro locais com substrato não consolidado; 2) Lagoa Azul com substrato não consolidado; 3) locais oceânicos de substrato rochoso; e 4) locais continentais de substrato consolidado. Já para a comunidade geral, 49 espécies foram encontradas, sendo o Filo Porifera o de maior representatividade específica, apesar das macroalgas terem formado o grupo mais abundante. A comunidade bentônica foi dominada por quatro espécies, que juntas alcançaram média de 50% da cobertura bentônica: alga calcária incrustante, algas formadoras de tapete de turf, a esponja Iotrochota arenosa e o zoantídeo Palythoacaribaeorum. Estatisticamente, o lado continental se mostrou diferente do oceânico, o qual possui maior riqueza, diversidade e uniformidade de espécies, muito provavelmente pelo menor número de espécies dominantes e aliado a isso maior heterogeneidade de habitats, o que promove o aumento da diversidade. Quinze novas espécies estão sendo registradas para a Baía da Ilha Grande, sendo três novas espécies, as quais estão sendo descritas por especialistas, e 12 são novos registros de espécies ou gêneros para a região, evidenciando que a diversidade de esponjas marinhas na BIG é alta e ainda pouco conhecida e que a formação de assembleias pode ser devida a singularidade de cada local, implicando na necessidade de conservação dos costões rochosos da Ilha Grande e cercanias, a qual pode ser manejada através da realização de rápidos levantamentos sobre a riqueza e o número de indivíduos da espécie na região

Formação de biofilmes por Enterococcus faecium sensível e multirresistente aos antimicrobianos: características à proteômica

Enterococcus faecium tem se destacado no cenário das infecções hospitalares, particularmente, amostras portadoras de características de multirresistência. Apesar de serem responsabilizados como agentes etiológicos em diferentes quadros clínicos, fatores associados a patogênese das infecções ainda não estão esclarecidos. Entretanto, sabe-se que a capacidade de formação de biofilmes pode ser responsabilizada como um dos atributos capazes de promover o papel patogênico desses microrganismos. Assim sendo, este estudo se propôs a investigar a capacidade de formação de biofilmes por duas amostras de E. faecium: SS-1274 (derivada da amostra tipo da espécie) e CL-6729 (multirresistente e pertencente a um complexo clonal globalmente disperso). As amostras foram caracterizadas fenotipica e genotipicamente para confirmação da identificação, determinação da susceptibilidade a 17 antimicrobianos, caracterização da concentração mínima inibitória para ampicilina, gentamicina e vancomicina, determinação do genótipo vanA e detecção de genes associados a expressão dos genes asa1, cylA, esp, gelE e hyl. A análise quantitativa da formação por 24h e 72h dos biofilmes foi realizada por metodologia do cristal violeta, em placas de microtitulação de poliestireno. Foram construídas curvas de formação pela avaliação da DO570nm das preparações coradas por cristal violeta em períodos de tempo de 2h a 74h. A influência de subCMIs de ampicilina, gentamicina e vancomicina na formação de biofilmes de E. faecium foi também caracterizada em ensaios de quantificação da biomassa. A presença de DNA e proteínas foi avaliada em ensaios de destacamento e por fluorimetria. A arquitetura, distribuição espacial e reação aos fluorocromos Syto9 e SYPRO Ruby Protein foram evidenciadas por microscopia confocal de varredura a laser. Análises proteômicas através da avaliação por SDS-PAGE e por ESI-Q-TOF também foram empregadas para avaliação de biofilmes versus crescimento planctônico. Nossos resultados demonstraram que a amostra CL-6729 apresentou uma maior biomassa nos tempos analisados. Apesar da menor quantidade de biomassa da amostra SS-1274, o perfil da curva de formação foi semelhante a CL-6729. As análises da matriz por ensaios quantitativos e microscopia confocal revelaram que proteína parece ser um importante constituinte para ambas as amostras, entretanto biofilmes formados na presença de da CMI e durante 24h, parecem sofrer alterações na constituição. Os resultados relativos às espectrometrias de massa sugerem que células de biofilmes de E. faecium podem também estar metabolicamente ativas, devido a identificação de um considerável número de proteínas relacionadas ao metabolismo e divisão celular, similarmente às células planctônicas. No entanto, investigações complementares são necessárias para quantificar as diferenças relacionadas a sua expressão. Foi observado que ambas as amostras independente das variações fenotípicas e genotípicas são capazes de formar biofilmes maduros exibindo constituição e arquitetura similares. Entretanto, nossos resultados sugeriram que cada amostra responde as diferentes situações de acordo com seus determinantes de virulência e resistência.

Eletrodeposição de revestimentos funcionais compósitos Cu/partículas de óxidos de alumínio

Revestimentos funcionais compósitos são um atrativo tecnológico crescente, pois possibilitam a combinação de materiais metálicos, poliméricos ou cerâmicos, resultando em propriedades superiores as dos materiais individuais, sendo por este motivo, largamente aplicados na engenharia de materiais. Na presente dissertação, foram produzidos revestimentos compósitos por eletrodeposição através da codeposição de uma matriz metálica de cobre e de partículas de óxidos de alumínio incorporadas (g - Al2O3 ou AlO(OH)), sobre substratos de aço carbono, a partir de diferentes banhos eletrolíticos. Três etapas foram efetuadas, na primeira realizou-se o estudo da influência do modo de agitação e da presença ou não de ligantes (citrato de sódio 1,00 mol/L) nos teores de cobre e alumina nos revestimentos produzidos. Em seguida foi avaliada a ação de complexantes (citrato de sódio 1,00 mol/L e pirofosfato de potássio 0,90 mol/L) usando polarização potenciodinâmica e voltametria cíclica, em conjunto com microbalança eletroquímica de cristal de quartzo (EQCM) e a posterior produção de revestimentos compósitos a partir de banhos contendo CuSO4 0,02 mol/L + pirofosfato de potássio 0,90 mol/L + 20 g/L de alumina, variando a densidade de corrente aplicada (I), a velocidade de agitação do eletrodo rotatório (A) e o do tempo de agitação prévia (t). Por fim, na terceira etapa, fez-se a substituição de alumina por Boehmita e a produção dos revestimentos a partir de banhos contendo CuSO4 0,02 mol/L + pirofosfato de potássio 0,90 mol/L + 20 g/L de Boehmita, empregando um planejamento composto central, em que os parâmetros citados também foram variados. Os resultados mostraram que a presença de um ligante e a agitação prévia e continuada do eletrólito durante o experimento foram fundamentais para a produção dos revestimentos compósitos. Ensaios de EQCM mostraram que o citrato se adsorveu na superfície do eletrodo de ouro, diferentemente do pirofosfato. Os teores de Boehmita e cobre nos revestimentos produzidos, assim como a morfologia, resistência de polarização e densidade de corrente de corrosão dos revestimentos foram influenciados pelos parâmetros avaliados.

Modelagem Numérica da Construção de Aterro Instrumentado na Baixada Fluminense, Rio de Janeiro.

A complexidade na previsão do comportamento de aterros sobre solos compressíveis representa um desafio para os engenheiros geotécnicos, mesmo os mais experientes. As limitações das teorias de análise e a dificuldade na seleção de parâmetros muitas vezes acarretam em estimativas de recalque incoerentes com a observação de campo. O presente trabalho tem como objetivo reproduzir a seqüência construtiva de extenso aterro, instrumentado, executado na Baixada Fluminense, Rio de Janeiro, para implantação da indústria Rio Polímeros, utilizando o programa PLAXIS. Os parâmetros geotécnicos foram definidos a partir de ensaios oedométricos, tendo sido realizado um estudo prévio sobre a qualidade das amostras. Estes parâmetros foram confrontados com a experiência local, que resume mais de 30 anos de investigações na argila mole da Baixada Fluminense, no Rio de Janeiro. Apesar da distância entre os locais de investigações, não houve diferenças significativas entre os parâmetros geotécnicos. As análises numéricas foram realizadas considerando-se diferentes hipóteses para o coeficiente de permeabilidade, de forma a reproduzir adequadamente as leituras de placa de recalque e poropressão registradas no campo. Este parâmetro teve grande influência na resposta da modelagem numérica, tendo sido obtidos bons resultados com valores de permeabilidade variando em função da profundidade.

A pilot survey of deepwater coral/sponge assemblages and their susceptibility to fishing/harvest impacts at the Olympic Coast National Marine Sanctuary (OCNMS). Cruise report for NOAA Ship McARTHUR II Cruise AR-04-04: Leg 2 (June 1-12, 2004)

The offshore shelf and canyon habitats of the OCNMS are areas of high primary productivity and biodiversity that support extensive groundfish fisheries. Recent acoustic surveys conducted in these waters have indicated the presence of hard-bottom substrates believed to harbor unique deep-sea coral and sponge assemblages. Such fauna are often associated with shallow tropical waters, however an increasing number of studies around the world have recorded them in deeper, cold-water habitats in both northern and southern latitudes. These habitats are of tremendous value as sites of recruitment for commercially important fishes. Yet, ironically, studies have shown how the gear used in offshore demersal fishing, as well as other commercial operations on the seafloor, can cause severe physical disturbances to resident benthic fauna. Due to their exposed structure, slow growth and recruitment rates, and long life spans, deep-sea corals and sponges may be especially vulnerable to such disturbances, requiring very long periods to recover. Potential effects of fishing and other commercial operations in such critical habitats, and the need to define appropriate strategies for the protection of these resources, have been identified as a high-priority management issue for the sanctuary.

A survey of deep-water coral and sponge habitats along the west coast of the US using a remotely operated vehicle: NOAA Fisheries Survey Vessel (FSV)'Bell M. Shimada', November 1-5, 2010

Remotely operated vehicle (ROV) surveys were conducted from NOAA’s state-of-the-art Fisheries Survey Vessel (FSV) Bell M. Shimada during a six-day transit November 1-5, 2010 between San Diego, CA and Seattle, WA. The objective of this survey was to locate and characterize deep-sea coral and sponge ecosystems at several recommended sites in support of NOAA’s Coral Reef Conservation Program. Deep-sea corals and sponges were photographed and collected whenever possible using the Southwest Fisheries Science Center’s (SWFSC) Phantom ROV ‘Sebastes’ (Fig. 1). The surveyed sites were recommended by National Marine Sanctuary (NMS) scientists at Monterey Bay NMS, Gulf of the Farallones NMS, and Olympic Coast NMS (Fig. 2). The specific sites were: Sur Canyon, The Football, Coquille Bank, and Olympic Coast NMS. During each dive, the ROV collected digital still images, video, navigation, and along-track conductivity-temperature-depth (CTD), and optode data. Video and high-resolution photographs were used to quantify abundance of corals, sponges, and associated fishes and invertebrates to the lowest practicable taxonomic level, and also to classify the seabed by substrate type. A reference laser system was used to quantify area searched and estimate the density of benthic fauna.

Rapid assessment of stony coral richness and condition on Saba Bank, Netherlands Antilles

The benthic habitats of Saba Bank (17°25′N, 63°30′W) are at risk from maritime traffic, especially oil tankers (e.g., anchoring). To mitigate this risk, information is needed on the biodiversity and location of habitats to develop a zone use plan. A rapid survey to document the biodiversity of macro-algae, sponges, corals and fishes was conducted. Here we report on the richness and condition of stony coral species at 18 select sites, and we test for the effects of bottom type, depth, and distance from platform edge. Species richness was visually assessed by roving scuba diver with voucher specimens of each species collected. Coral tissue was examined for bleaching and diseases. Thirty-three coral species were documented. There were no significant differences in coral composition among bottom types or depth classes (ANOSIM, P>0.05). There was a significant difference between sites (ANOSIM, P<0.05) near and far from the platform edge. The number of coral species observed ranged from zero and one in algal dominated habitats to 23 at a reef habitat on the southern edge of the Bank. Five reef sites had stands of Acropora cervicornis, a critically endangered species on the IUCN redlist. Bleaching was evident at 82% of the sites assessed with 43 colonies bleached. Only three coral colonies were observed to have disease. Combining our findings with that of other studies, a total of 43 species have been documented from Saba Bank. The coral assemblage on the bank is representative and typical of those found elsewhere in the Caribbean. Although our findings will help develop effective protection, more information is needed on Saba Bank to create a comprehensive zone use plan. Nevertheless, immediate action is warranted to protect the diverse coral reef habitats documented here, especially those containing A. cervicornis.

Biogeographic characterization of fish communities and associated benthic habitats within the Flower Garden Banks National Marine Sanctuary: sampling design and implementation of scuba surveys on the coral caps

The Flower Garden Banks National Marine Sanctuary (FGBNMS) is located in the northwestern Gulf of Mexico approximately 180 km south of Galveston, Texas. The sanctuary’s distance from shore combined with its depth (the coral caps reach to within approximately 17 m of the surface) result in limited exposure of this coral reef ecosystem to natural and human-induced impacts compared to other coral reefs of the western Atlantic. In spite of this, the sanctuary still confronts serious impacts including hurricanes events, recent outbreaks of coral disease, an increase in the frequency of coral bleaching and the massive Diadema antillarum die-off during the mid-1980s. Anthropogenic impacts include large vessel anchoring, commercial and recreational fishing, recreational scuba diving, and oil and gas related activities. The FGBNMS was designated in 1992 to help protect against some of these impacts. Basic monitoring and research efforts have been conducted on the banks since the 1970s. Early on, these efforts focused primarily on describing the benthic communities (corals, sponges) and providing qualitative characterizations of the fish community. Subsequently, more quantitative work has been conducted; however, it has been limited in spatial scope. To complement these efforts, the current study addresses the following two goals put forth by sanctuary management: 1) to develop a sampling design for monitoring benthic fish communities across the coral caps; and 2) to obtain a spatial and quantitative characterization of those communities and their associated habitats.

聚合物膜离子选择性电极的制备与性能研究

聚合物膜离子选择性电极具有选择性高、使用简便、价格低廉等优点，在环境监测中日益受到人们的关注。这类电极的响应特性主要取决于聚合物膜相中起分子识别作用的离子载体的选择性。本文设计合成了一系列对重金属离子具有高选择性的有机配体，并将其作为电中性离子载体应用于银、汞、锌、铬等离子选择性电极中，实现了对重金属离子的高选择性测定。此外，我们对海水中有机物质的紫外线消解进行了研究，优化了消解条件，采用离子选择性电极技术实现了对海水中重金属污染物的快速检测。具体内容如下： 1、以硫氮杂冠醚为离子载体的银离子选择性电极制备及性能研究。 合成了一系列硫氮杂冠醚配体，通过优化反应条件，提高了反应产率，简化了产物处理过程。将此类冠醚作为离子载体用于银离子选择性电极的制备，并讨论了冠醚环大小、冠醚环的韧性以及硫原子个数对电极选择性的影响。在此研究基础上，利用沉淀-溶解平衡法调节内充液主离子浓度，采用冠醚9，10，12，13，24，25-六氢-5H，15H，23H-二苯[b，q][1，7，10，13，19，4，16]五硫二氮二十三环-6，16 (7H，17H)-二酮环作为低检出限银离子选择性电极载体，通过优化电极的内充液和聚合物膜组份，测得最低检出限为2.2×10-10 M，电极电位响应斜率为54.5 mV/dec.，线性范围为1.0×10-9-1.0×10-5 M，电极使用寿命为一个月。采用标准加入法，成功实现了自来水中银离子浓度的测试，并以该电极作为指示电极，以硝酸银溶液为滴定剂，成功滴定了I-、Br-和Cl-离子的混合液。 2、以1，2，4-三唑衍生物为离子载体的汞离子选择性电极的制备及性能表征。 设计合成了一种基于1，2，4-三唑的希夫碱结构化合物，3，5-二(二硫代甲酸苄酯肼基-2-亚甲胺基苯氧甲基)-1-(四氢-2H-吡喃)-1H-1，2，4-三唑，并成功用作中性载体实现对汞离子的测定。在最佳膜组分条件下，以该化合物作为载体的汞离子选择性电极的检出限为2.6×10-7 M Hg2+，电极电位响应斜率为29.3±0.3 mV/dec.，线性范围为1.0×10-6-3.0×10-4 M。该电极使用寿命为2个月，在pH 2.6-5.2范围内测试不受酸度影响。以该电极为指示电极，以EDTA为滴定剂，可准确滴定溶液中汞离子的浓度。 3、以希夫碱结构化合物为离子载体的锌离子选择性电极的制备及性能研究。 本文设计了一种含吡啶杂环的希夫碱结构化合物(E)-N'-(吡啶-2-亚甲胺基)-2-((E)-吡啶-2-亚甲胺基)苯甲酰肼，并成功用作离子载体实现对锌离子的测定。在最佳膜组分条件下，以该化合物为载体的锌离子选择性电极的检出限为7.4×10-7M Zn2+，电极电位响应斜率为25.9 mV/dec.，线性范围为1.0×10-6-1.0×10-3 M。该电极使用寿命为3个月，在pH 3.4-5.8范围内测试不受酸度影响。以该电极为指示电极，以EDTA为滴定剂，可准确滴定溶液中锌离子的浓度。 4、紫外光在线消解技术用于离子选择性电极测试海水中重金属离子的研究。 海水中重金属离子大多以络合物形式存在，而离子选择性电极只对游离态金属离子响应，因此要实现离子选择性电极测试海水中的重金属，首先必须使金属离子从络合物中游离出来。紫外光消解方法相对于其它海水预处理手段是一种清洁的样品预处理方法。我们以模拟海水为考察对象，考察了盐度、酸度、有机物浓度对消解效率的影响，并在优化消解条件的基础上对实际海水进行消解，利用离子选择性电极成功实现了海水中铜离子浓度的测试，测试值与ICP-MS数值一致。 5、合成希夫碱结构罗丹明B衍生物作为载体和分子探针用于Cr3+离子的检测。 设计合成了希夫碱结构罗丹明B衍生物2-亚甲胺基-8-乙酯基喹啉-罗丹明。荧光法显示，在化合物对铬离子(III)有较好的选择性，进而我们将该化合物作为分子探针进行了详细的研究。结果表明，分子探针与铬离子配位比为1:1，铬离子响应的线性范围是8.0×10-7-8.0×10-5 M，检测下限为1.9×10-7 M。电化学测试结果显示，基于该化合物为载体的离子选择性电极对铬离子(III)的选择性较差。

SU8 bio-chemical sensor microarrays

Microfabricated cantilevers have recently attracted considerable attention as novel label-free chemical and biological biosensors which translate surface reactions into nanomechanical bending motion. However these studies have primarily focused on commercially available silicon cantilevers and relatively little work has been performed on cantilevers fabricated from other materials. Polymeric materials, offer significant advantages over silicon by virtue of the low Young's modulus, ease of microfabrication and reduced cost. In this paper, we report a non-vacuum fabrication process to produce arrays of SU8 cantilevers and demonstrate their application as chemical sensors using in situ reference cantilevers. © 2006 Elsevier B.V. All rights reserved.

Friction of sliding surfaces carrying adsorbed lubricant layers

In concentrated contacts the behaviour of lubricants is much modified by the high local pressures: changes can arise both from molecular ordering within the very thin film lubricant layers present at the interface as well as from the deposition on the component surfaces of more solid-like polymeric boundary layers. These 'third bodies' separating the solid surfaces may have rheological or mechanical properties very different from those observed in the bulk. Classical elasto-hydrodynamic theory considers the entrapped lubricant to exhibit a piezo-viscous behaviour while the conventional picture of more solid boundary lubricant layers views their shear strength r as being linearly dependent on local pressure p, so that T = TO + ap where TO and a are constants. If TO is relatively small, then the coefficient of friction \i = T Ip ~ a and so Amonton's laws are recovered. However, the properties of adsorbed or deposited surface films, or indeed other third bodies such as debris layers, may be more complex than this. A preliminary study has looked quantitatively at the influence of the pressure dependence of the shear strength of any surface layer on the overall friction coefficient of a contact which is made up of an array of asperities whose height varies in a Gaussian manner. Individual contact points may be elastic or plastic. The analysis results in plots of coefficient of friction versus the service or load parameter PIH&NRa where P is the nominal pressure on the contact, HS the hardness of the deforming surface, N the asperity density, R the mean radius of curvature of the asperities, and a is the standard deviation of their height distribution. In principle, any variation oft withp can be incorporated into the model; however, in this initial study we have used data on colloidal suspensions from the group at the Ecole Centrale de Lyon as well as examining the effect of functional relationships of somewhat greater complexity than a simple linear form. Results of the analysis indicate that variations in fj. are possible as the load is varied which depend on the statistical spread of behaviour at individual asperity contacts. The value of this analysis is that it attempts to combine the behaviour of films on the molecular scale with the topography of real engineering surfaces and so give an indication of the effects at the full-size or macro-scale that can be achieved by chemical or molecular surface engineering.

Nanoindentation measurements of bone viscoelasticity as a function of hydration state

Bone is an anisotropic material, and its mechanical properties are determined by its microstructure as well as its composition. Mechanical properties of bone are a consequence of the proportions of, and the interactions between, mineral, collagen and water. Water plays an important role in maintaining the mechanical integrity of the composite, but the manner in which water interacts within the ultrastructure is unclear. Dentine being an isotropic two-dimensional structure presents a homogenous composite to examine the dehydration effects. Nanoindentation methods for determining the viscoelastic properties have recently been developed and are a subject of great interest. Here, one method based on elastic-viscoelastic correspondence for 'ramp and hold' creep testing (Oyen, J. Mater. Res., 2005) has been used to analyze viscoelastic behavior of polymeric and biological materials. The method of 'ramp and hold' allows the shear modulus at time zero to be determined from fitting of the displacement during the maximum load hold. Changes in the viscoelastic properties of bone and dentine were examined as the material was systematically dehydrated in a series of water:solvent mixes. Samples of equine dentine were sectioned and cryo-polished. Shear modulus was obtained by nanoindentation using spherical indenters with a maximum load hold of 120s. Samples were tested in different solvent concentrations sequentially, 70% ethanol to 50% ethanol, 70 % ethanol to 100% ethanol, 70% ethanol to 70% methanol to 100% methanol, and 70% ethanol to 100% acetone, after storage in each condition for 24h. By selectively removing and then replacing water from the composite, insights in to the ultrastructure of the tissue can be gained from the corresponding changes in the experimentally determined moduli, as well as an understanding of the complete reversibility of the dehydration process. © 2006 Materials Research Society.

Poroelastic indentation analysis for hydrated biological tissues

Indentation techniques are employed for the measurement of mechanical properties of a wide range of materials. In particular, techniques focused at small length-scales, such as nanoindentation and AFM indentation, allow for local characterization of material properties in heterogeneous materials including natural tissues and biomimetic materials. Typical elastic analysis for spherical indentation is applicable in the absence of time-dependent deformation, but is inappropriate for materials with time-dependent responses. Recent analyses for the viscoelastic indentation problem, based on elastic-viscoelastic correspondence, have begun to address the issue of time-dependent deformation during an indentation test. The viscoelastic analysis has been shown to fit experimental indentation data well, and has been demonstrated as useful for characterization of viscoelasticity in polymeric materials and in hydrated mineralized tissues. However, a viscoelastic analysis is not necessarily sufficient for multi-phase materials with fluid flow. In the current work, a poroelastic analysis-based on fluid motion through a porous elastic network-is used to examine spherical indentation creep responses of hydrated biological materials. Both analytical and finite element approaches are considered for the poroelastic Hertzian indentation problem. Modeling results are compared with experimental data from nanoindentation of hydrated bone immersed in water and polar solvents (ethanol, methanol, acetone). Baseline (water-immersed) bone responses are characterized using the poroelastic model and numerical results are compared with altered hydration states due to polar solvents. © 2007 Materials Research Society.

Benthic diversity of River Gomti in relation to the prevailing environmental conditions in Lucknow

To evaluate the benthic diversity of River Gomti in relation to the prevailing environmental conditions, four stations, viz., Maa Chandrika Devi, Daliganj, Ambedkar Park and Aquaduct, were identified from upstream to downstream along the course of the river in Lucknow. Dissolved oxygen was low on many occasions at all the stations except Maa Chandrika Devi and chemical oxygen demand values were high. There was a gradual increase in mean nitrite and phosphate values from up to downstream. Benthic fauna was dominated by oligochaetes and chironomus larvae. Other groups reported were leeches, nematodes, sponges, crustaceans, pelycypodes, gastropods and fish fry. Population density was exceptionally high at Daliganj (20,135 m sub(-1) ) followed by Ambedkar Park (5,199 m sub(-1)) and Aquaduct (3,287 m sub(-1)), and low at Maa Chandrika Devi (264 m sub(-1)). Oligochaete genera common at all the four stations were Lumbricillus, Limnodrillus, Branchiura, Chaetogaster, Nais and Tubifex. Odonates were reported only from Maa Chandrika Devi while sponges were encountered at Daliganj and Aquaduct. On some occasions, fish fry were also found at Ambedkar Park and Aquaduct. Seasonally, maxima for population density were observed during pre-monsoon and minima during monsoon. The organic pollution indicator benthic species reported were tubificids, chironomids, culicoid larvae, Lamellidens sp., Corbicula sp., Lymnaea sp. and leech. Branchiurans, Tubifex sp. and Chironomus larvae were reported at all the stations. Filthy condition with foul smell throughout the length of the river coupled with poor water quality and appearance of indicator organisms at all the stations indicate that the river is under severe pollution stress due to anthropogenic discharges and it has reached an alarming stage.

Perylene-based fluorescent liquid crystal dye guest-host mixtures

We present a study on a series of dye guest-host mixtures using fluorescent perylene-based molecules as the guest dye in an organosiloxane host. These hosts have temperature-independent switching, at room temperature, through 90° for fields of the order of 10 Vrms/μm. Perylene molecules have been grafted onto the organosiloxane moiety via an alkyl spacer producing novel and rugged fluorescent dyes that are readily miscible in the host. Micro-separation of the low molar mass siloxane groups in the mesophases tend to form smectic phases. These planes produce an effective two-dimensional polymer backbonethat engenders the rugged mechanical properties of polymeric liquid crystals onto these low molar mass ferroelectric liquid crystals. In this study we show how the introduction of the dye molecules affects the electro-optic properties of the organosiloxane host. © 2001 OPA (Overseas Publishers Association) N.V. Published by license under the Gordon and Breach Science Publishers imprint, a member of the Taylor & Francis Group,.