975 resultados para Polivinil álcool


Relevância:

10.00% 10.00%

Publicador:

Resumo:

O uso abusivo de álcool por adolescentes é uma questão que preocupa os envolvidos com a educação, uma vez que as consequências desse fato podem gerar sérios prejuízos ao processo ensino-aprendizagem e ao adolescente que abusa. Com o objetivo de contribuir para o debate na busca de uma intervenção efetiva que possa ser utilizada, sobretudo nas escolas, procuramos detectar a possível relação entre uso abusivo de álcool e raciocínio moral. Para tanto, participaram alunos do ensino médio de uma escola pública, selecionados por meio da aplicação do AUDIT (The Alcohol Use Disorder Identification Test), que posteriormente foram entrevistados, conforme a Moral Judgement Interview (MJI) proposta por Kohlberg. Os resultados obtidos revelam níveis e estágios morais aquém dos esperados. Concluímos que a prevenção pode ser pensada por meio da Educação Moral como uma proposta de intervenção efetiva contra o uso abusivo de álcool e outras drogas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The northeastern region is responsible to 14.32% of sugarcane national production. This lowered contribution is due to edaphoclimatic condition. Flowering is a vital process to plant which consumes lots of energy and it culminates in a process called isoporization. This one can give in a decreasing of 60% on alcohol and water production. It may consider that cropped sugarcane has a hibrid with octaploid genome, there are varieties with a flowering standard until of non flowering. Using this natural genetic potential on different croppings of sugarcane, the aim of this work was to understand as this process occurs by the usage of subtractive approaches. The total RNA was extracted using Trizol of peaks of merisematics of croppings with induced flowering and other with late flowering. From this total RNA were built four subtractives libraries (B1- induced early flowering subtracted on late flowering not induced; B2- late flowering not induced subtracted induced early flowering; B3- induced early flowering subtracted of not induced early flowering; B02- not induced early flowering subtracted from induced early flowering) using kits Super Smart cDNA synthesis and BD Clontech kit select cDNA subtraction (Clontech). This material was clone don vector pGEM T-easy(Promega) and changed in competent cells of E.coli DH10B. Given analysis sequence was carried out a program BLASTn against database of NCBI and genome of Arabidopsis thaliana, rice and maize. Clones were grouped in 9 different classes according to function. Some factors already related as couples of flower induction were identified at different libraries. And grouped proteins with cell cycle and it controls were presents, mainly kinases proteins. Related factors to proteic sinthesis, metabolism, defence, cell communication were also given in both libraries .Some identified genes did not show similarity on database or homology with hypothesis function, and it can represents new genes to be deposited in international database. These results offers that some identified on sugarcane, classified as on factors classes, cell cycle and cell communication, trough unknown genes, can be linked with genetic changing to the flowering process found in the northeastern region

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este estudo teve o objetivo de avaliar o comportamento de treze tipos de meios filtrantes primários desenvolvidos para uso na filtração a vácuo de lodo de caldo de cana, simulando as operações de formação e desidratação da torta em filtros contínuos de tambor rotativo a vácuo, empregados nas indústrias de açúcar e álcool do Brasil. Para tanto, foi desenvolvida uma planta-piloto anexa ao filtro de tambor rotativo a vácuo, na qual foram realizados todos os ensaios, com o objetivo de refletir a realidade das variáveis operacionais durante uma safra sucroalcooleira. Os resultados são apresentados, comparando-se as taxas de filtração, variando a pressão de formação da torta, temperatura e concentração de auxiliar filtrante, mostrando ao usuário um novo caminho para o melhoramento quantitativo e qualitativo, sem aumentar a área nominal da unidade de filtração.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The purpose of this study was to investigate the risk factors to the functional edentulism in adults aged 35 a 44 years old of Natal-RN, 278 adults took part in the study. They were all selected from a previous dental loss prevalence study thus being complemented by an active research. The study was a case-control based and data collection was made though a survey as well as with a clinical examination. The cases were identified through individuals with 20 or more teeth. Age and gender were used as variables of pairing off. The data was analyzed through chi-square, significant level of 95% to the checking of its force associations. The independent variables were grouped in three levels. The first one, more macro, is related to the region where the individual lives, which was also related to the second level, the family-based one, linked with a third level, at this low socio-economical level, where the domiciliary density was favorable, living in capital cities, regions with prime sanitary condicitions, with predominant possibility of accessing the public dental service, but in despite of this, only looking for this service when tooth ache is felt, where preferentially an aid dressing treatment is executed in detriment of preventive procedures. From all the samples, less than 25% of the individuals make use of tobacco and alcoholic beverages for quite a number of years. There was an association of functional edentulism with all the studied variables in a regional method. In the family-based with Critério Brasil (OR=4,45) and monthly wages (OR=9,62) and to an to an individual level, the associations took place with the current use of kind of attendance (OR=1,78), looks for dressing treatment (OR=2,51), does not look for preventive treatment (OR=3,31), pain as the main cause of demand (OR=1,92), previous treatment as the demanding reason for dental service (OR+0,28), interval of the last visit to the dental service (OR=1,35) and when advise was received (OR=1,66). It was noticed from the results that the functional edentulism is much more expressive in those families which live in environments with precarious social economical sanitary conditions. Such conditions seem to have a direct influence upon the family social economical conditions which are also shown in detriment to functional edentulism. In the same way, the collection of variants influence the social economical conditions of the individual, as well as the kind of dental service searched by them, the reason of the search and the interval of the last visit to the dental service were strong determiners to the functional edentulism. Beyond that, individual habits like the use of tobacco and its frequency on its previous use influenced in a significant way the existence of functional edentulism in the studied population

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The squamous cell carcinoma (SCC) is the most common malignant neoplasm of epithelial origin in oral cavity and present high capacity to invade adjacent structures. Traditionally, SCC has a predominance of 50 years male patients with long-time use of tobacco and alcohol, and the tongue is the most affected anatomic site. At present, there is an increasing incidence of SCC in patients below 40 years of age, who has been exposed or not to risk factors, mainly for tongue lesions. This study aims to analyze cell proliferation index using Ki-67 antigen in SCC of the tongue for two groups of different age range: until 40 years and older than 50 years. The first group was composed by 16 patients and the second one was composed by 20 patients. Clinicopathological features of the cases were also assessed. There was a male predominance in both groups. Tobacco and alcohol habits were common for patients until 40 years (72,2%), as well as for patients older than 50 years (52,9%). The first group had statistical association with the presence of regional metastases (p = 0,036) and with the most advanced stages of the disease (p = 0,012). Considering the histological malignancy grading, there was higher incidence (56,2%) of high malignancy grade tumors in the group of patients until 40 years old, but no statistical difference has found between groups and histologic malignancy grading. Regarding the immunohistochemical expression of Ki-67, there was no statistically significant difference between the antibody expression of the groups, as well as between other clinical and histopathological parameters. This study identified no significant difference regarding cell proliferation between the analyzed groups

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study has as main objectives to translate and to adapt the MCMI-III to brazilian Portuguese, as well as investigate and analyze the involved modifications in the Alcohol Dependence Scale concerning to the results obtained on the validity and on the process of adaptation to Brazil. The inventory was translated and, posteriorly, applied on people with different reading levels to certify that the items are understandable to public in general, from diverse places of the country, divided into clinical and non-clinical groups. Were evaluated 2855 subjects between the ages of 18 and 85 years old, male and female, resident and dwellers of Brazilian cities. The application methods were face-to-face and computerized. Results showed that the clinical group presented significant differences between the means in comparison to the non-clinical group. Through the application of the General Health Questionnaire were developed studies related to the achievement of convergent validity and its results pointed to the relation between the instrument scores and the MCMI-III. The Alcohol Dependence Scale analysis indicated that people who reported abusive use of alcohol had highest scores, indicating adequacy of the instrument on identifying manifestation of disorders and syndromes. Nevertheless, further studies are necessary to the establishment of normative patterns to the Brazilian sample

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Due to the need of increasing production in reservoirs that are going through production decline, methods of advanced recovery have frequently been used in the last years, as the use of conventional methods has not been successful in solving the problem of oil drifting. In this work, the efficiency of different microemulsionated systems in the flow of oil from cores from Assu and Botucatu formations. Regarding drifting tests, cores were calcinated at a temperature of 1000°C, for 18 hours, with the aim of eliminating any organic compound present in it, increasing the resultant permeability. Following, the cores were isolated with resin, resulting in test specimens with the following dimensions: 3.8 cm of diameter and 8.7 cm of length. Cores were saturated with brine, composed of aqueous 2 wt % KCl, and oil from Guamaré treatment station (Petrobras/RN). A pressure of 20 psi was used in all tests. After core saturation, brine was injected again, followed by oil at constant flow rate. The system S3 - surfactant (anionic surfactant of short chain), isoamillic alcohol, pine oil, and water - presented the best drift efficiency, 81.18%, while the system S1E commercial surfactant, ethyl alcohol, pine oil, and distilled water presented low drift efficiency, 44,68%

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitablesurfactant was the EO 7 due to the lower reagent consumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Polyester fibers are the most used fibers in the world and disperse dyes are used for dyeing these fibers. After dyeing, the colorful dyebath is discharged into effluent streams, which needs a special treatment for color removal. Surfactants interaction with dyes has been evaluated in several studies, including the textile area, specifically in the separation of dyes from textile wastewater. In this work a cationic surfactant was used in a microemulsion system for the extraction of anionic dyes (disperses dyes) from textile wastewater. These microemulsion system was composed by dodecylamonium chloride (surfactant), kerosene oil (organic phase), isoamyl alcohol (cosurfactant) and the wastewater (aqueous phase). The wastewater that results after the dyeing process is acid (pH 5). It was observed that changing the pH value to above 12.8 the extraction could be made, resulting in an aqueous phase with low color level. The Scheffé net experimental design was used for the extraction process optimization, and the obtained results were evaluated using the program "Statistica 7.0". The optimal microemulsion system was composed by 59.8wt.% of wastewater, 30.1wt.% of kerosene, 3.37wt.% of surfactant and 6.73wt.% of cosurfactant, providing extraction upper than 96%. A mix of reactive dyebath (50%) and disperse dyebath (50%) was used as aqueous phase and it presented extraction upper than 98%. The water phase after extraction process can be reused in a new dyeing, being obtained satisfactory results, according to the limits established by textile industry for a good dyeing. Tests were accomplished seeking to study the influence of salt addition and temperature. An experimental design was used for this purpose, which showed that the extraction doesn't depend on those factors. In this way, the removal of color from textile wastewater by microemulsion is a viable technique (that does not depend of external factors such as salinity and temperature), being obtained good extraction results even with in wastewater mixtures

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Most of the energy consumed worldwide comes from oil, coal and natural gas. These sources are limited and estimated to be exhausted in the future, therefore, the search for alternative sources of energy is paramount. Currently, there is considerable interest in making trade sustainable biodiesel, a fuel alternative to fossil fuels, due to its renewable nature and environmental benefits of its use in large scale. This trend has led the Brazilian government to establish a program (Probiodiesel) with the aim of introducing biodiesel into the national energy matrix, by addition of 5% biodiesel to conventional diesel in 2010 to foster not only the increase of renewable energy, but reduce imports of crude oil. This work evaluates different methods of extraction of oil Carthamus tinctorius L., their characterization by IR, 1H and 13C NMR, HPLC and TG and their use in the production of methyl ester (molar ratio of oil / alcohol 1:6, and NaOH catalyst). The physico-chemical parameters (acid value, density, viscosity, saponification index and surface tension) of oil and biodiesel were also described. The produced biodiesel had a yield of 93.65%, was characterized in relation to their physicochemical properties showing satisfactory results (density=875 kg/m3, viscosity = 6.22 mm2/s, AI = 0.01 mg (NaOH) /g) compared with the values established by the the National Agency Oil, Natural Gas and Biofuels

Relevância:

10.00% 10.00%

Publicador:

Resumo:

During the storage of oil, sludge is formed in the bottoms of tanks, due to decantation, since the sludge is composed of a large quantity of oil (heavy petroleum fractions), water and solids. The oil sludge is a complex viscous mixture which is considered as a hazardous waste. It is then necessary to develop methods and technologies that optimize the cleaning process, oil extraction and applications in industry. Therefore, this study aimed to determine the composition of the oil sludge, to obtain and characterize microemulsion systems (MES), and to study their applications in the treatment of sludge. In this context, the Soxhlet extraction of crude oil sludge and aged sludge was carried out, and allowing to quantify the oil (43.9 % and 84.7 % - 13 ºAPI), water (38.7 % and 9.15 %) and solid (17.3 % and 6.15 %) contents, respectively. The residues were characterized using the techniques of X-ray fluorescence (XRF), Xray diffraction (XRD) and transmission Infrared (FT-IR). The XRF technique determined the presence of iron and sulfur in higher proportions, confirming by XRD the presence of the following minerals: Pyrite (FeS2), Pyrrhotite (FeS) and Magnetite (Fe3O4). The FT-IR showed the presence of heavy oil fractions. In parallel, twelve MES were prepared, combining the following constituents: two nonionic surfactants (Unitol L90 and Renex 110 - S), three cosurfactants (butanol, sec-butanol and isoamyl alcohol - C), three aqueous phase (tap water - ADT, acidic solution 6 % HCl, and saline solution - 3.5 % NaCl - AP) and an oil phase (kerosene - OP). From the obtained systems, a common point was chosen belonging to the microemulsion region (25 % [C+S] 5 % OP and AP 70 %), which was characterized at room temperature (25°C) by viscosity (Haake Rheometer Mars), particle diameter (Zeta Plus) and thermal stability. Mixtures with this composition were applied to oil sludge solubilization under agitation at a ratio of 1:4, by varying time and temperature. The efficiencies of solubilization were obtained excluding the solids, which ranged between 73.5 % and 95 %. Thus, two particular systems were selected for use in storage tanks, with efficiencies of oil sludge solubilization over 90 %, which proved the effectiveness of the MES. The factorial design delimited within the domain showed how the MES constituents affect the solubilization of aged oil sludge, as predictive models. The MES A was chosen as the best system, which solubilized a high amount of aged crude oil sludge (~ 151.7 g / L per MES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Biodiesel is a fuel made up by mono-alkyl-esters of long chain fatty acids, derived from vegetable oils or animal fat. This fuel can be used in compression ignition engines for automotive propulsion or energy generation, as a partial or total substitute of fossil diesel fuel. Biodiesel can be processed from different mechanisms. Transesterification is the most common process for obtaining biodiesel, in which an ester compound reacts with an alcohol to form a new ester and a new alcohol. These reactions are normally catalyzed by the addition of an acid or a base. Initially sunflower, castor and soybean oil physicochemical properties are determined according to standard test methods, to evaluate if they had favorable conditions for use as raw material in the transesterification reaction. Sunflower, castor and soybean biodiesel were obtained by the methylic transesterification route in the presence of KOH and presented a yield above 93% m/m. The sunflower/castor and soybean/castor blends were studied with the aim of evaluating the thermal and oxidative stability of the biofuels. The biodiesel and blends were characterized by acid value, iodine value, density, flash point, sulfur content, and content of methanol and esters by gas chromatography (GC). Also studies of thermal and oxidative stability by Thermogravimetry (TG), Differential Scanning Calorimetry High Pressure (P-DSC) and dynamic method exothermic and Rancimat were carried out. Biodiesel sunflower and soybean are presented according to the specifications established by the Resolution ANP no 7/2008. Biodiesel from castor oil, as expected, showed a high density and kinematic viscosity. For the blends studied, the concentration of castor biodiesel to increased the density, kinematic viscosity and flash point. The addition of castor biodiesel as antioxidant in sunflower and soybean biodiesels is promising, for a significant improvement in resistance to autoxidation and therefore on its oxidative stability. The blends showed that compliance with the requirements of the ANP have been included in the range of 20-40%. This form may be used as a partial substitute of fossil diesel

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The sugar cane crop uptake high amount of nutrients from the soil and the lack of these elements can result in low productivity of this crop. This study aimed to evaluate the effect of sources and doses of manganese on the accumulation of macro-and micronutrients of straw and stalk yield in the sugar cane crop. The experiment was conducted at Fujimoto farm, area administered by the Vale do Parana SA Alcohol and Sugar located in Suzanapolis - SP county. The experimental design was randomized blocks in a factorial scheme 5x3, with five levels of manganese and three sources, applied at planting, in four replications. The plots consisted of four rows 5 m long, spaced by 1.5 m. The variety used was RB 86-7515. The variables analyzed in the sugar cane plant and sugar cane ratoon cane were: accumulation of macro-and micronutrients, dry weight of straw and crop yield. The sources Mn influenced the accumulation of N, P and K in the straw cane plant and ratoon sugar cane in the accumulation of K, Ca, S, B, Mn and Zn. The increasing levels of Mn increased the cumulative amount of Ca, Mg, S and Mn in the cane plant and stubble of Ca, Fe and Mn in sugar cane ratoon. The sources of Mn did not influence the dry matter yields of straw and stalk, so as to plant cane to first sugar cane ratoon. The levels of Mn influenced linearly the dry straw on cane plant. As for the stem yield of sugarcane plant and sugar cane ratoon was not influenced by the levels of Mn.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The crop of the sugarcane is stood out in the Brazilian agricultural scenery, due to the great demand of sugar, alcohol and by-products. The present work had as objective to evaluate the effect of five doses and three sources of manganese applied at planting furrow in sugarcane, in two cuts, in the Northwest area of São Paulo State, Brazil. The experiment was conducted at Fujimoto farm with coordinates 20 degrees 32 'S and 50 degrees 58' O, and altitude of 361 meters, area administered by Distillery Vale do Parana S/A Alcool and Acucar, in Suzanapolis county - São Paulo state. A randomizef blocks design in a factorial scheme 5x3, being 5 doses of manganese (0; 2.5; 5.0; 7.5 and 10.0 kg ha(-1)), and 3 sources (Quelate, FTE and manganese sulfate), applied at planting furrow, in 4 repetitions was used. The plots were constituted by 4 lines of 5 m length, spaced by 1.5 m. The RB 86-7515 variety was used. The sources of manganese did not influence in the technological quality and productivity of stems in none of the cuts of sugarcane. The application of doses of manganese resulted in increase on values of recoverable total sugar per ha and ton of pol per ha in plant cane, not influencing in the other variables analyzed on plant cane and ratoon cane.