Development of optical ray tracing model of a standard parabolic trough collector

Parabolic trough concentrator collector is the most matured, proven and widespread technology for the exploitation of the solar energy on a large scale for middle temperature applications. The assessment of the opportunities and the possibilities of the collector system are relied on its optical performance. A reliable Monte Carlo ray tracing model of a parabolic trough collector is developed by using Zemax software. The optical performance of an ideal collector depends on the solar spectral distribution and the sunshape, and the spectral selectivity of the associated components. Therefore, each step of the model, including the spectral distribution of the solar energy, trough reflectance, glazing anti-reflection coating and the absorber selective coating is explained and verified. Radiation flux distribution around the receiver, and the optical efficiency are two basic aspects of optical simulation are calculated using the model, and verified with widely accepted analytical profile and measured values respectively. Reasonably very good agreement is obtained. Further investigations are carried out to analyse the characteristics of radiation distribution around the receiver tube at different insolation, envelop conditions, and selective coating on the receiver; and the impact of scattered light from the receiver surface on the efficiency. However, the model has the capability to analyse the optical performance at variable sunshape, tracking error, collector imperfections including absorber misalignment with focal line and de-focal effect of the absorber, different rim angles, and geometric concentrations. The current optical model can play a significant role in understanding the optical aspects of a trough collector, and can be employed to extract useful information on the optical performance. In the long run, this optical model will pave the way for the construction of low cost standalone photovoltaic and thermal hybrid collector in Australia for small scale domestic hot water and electricity production.

Why ADR must be a mandatory subject in the law degree : A cheat sheet for the willing and a primer for the non-believer

The profession of law is deeply steeped in tradition and conservatism, which influences the content and pedagogy employed in law faculties across Australia. Indeed, the practice of law and the institutions of legal education are in a relationship of mutual influence; a dénouement which preserves the best aspects of the common law legal system, but also leaves the way we educate, practice and think about the role of law resistant to change. In this article, the authors lay down a challenge to legal education orthodoxy and a call to arms for legal academic progressivists: that alternative dispute resolution (ADR) should be a compulsory, stand alone subject in the law degree. The authors put forward 10 simple arguments as to why every law student should be exposed to a semester-long course of ADR instruction.

Bug reproduction : a collaborative practice within software maintenance activities

Software development settings provide a great opportunity for CSCW researchers to study collaborative work. In this paper, we explore a specific work practice called bug reproduction that is a part of the software bug-fixing process. Bug re-production is a highly collaborative process by which software developers attempt to locally replicate the ‘environment’ within which a bug was originally encountered. Customers, who encounter bugs in their everyday use of systems, play an important role in bug reproduction as they provide useful information to developers, in the form of steps for reproduction, software screenshots, trace logs, and other ways to describe a problem. Bug reproduction, however, poses major hurdles in software maintenance as it is often challenging to replicate the contextual aspects that are at play at the customers’ end. To study the bug reproduction process from a human-centered perspective, we carried out an ethnographic study at a multinational engineering company. Using semi-structured interviews, a questionnaire and half-a-day observation of sixteen software developers working on different software maintenance projects, we studied bug reproduction. In this pa-per, we present a holistic view of bug reproduction practices from a real-world set-ting and discuss implications for designing tools to address the challenges developers face during bug reproduction.

Psychological symptoms : a review of screening practices for patients with coronary heart disease (CHD)

Background/Aims: Coronary heart disease (CHD) and coronary events have been strongly linked to psychological symptoms in patients during hospitalisation and post-discharge. Within Australia CHD average length of stay is decreasing and symptoms often do not present until discharge. Early screening and treatment of psychological symptoms has been recommended to reduce mortality and identify anxiety and depression. This literature review was undertaken to evaluate and describe current screening practices to identify psychological symptoms in these patients.

Part 1 MOO methods for multidisciplinary design using parallel evolutionary algorithms, game theory and hierarchical topology. (Part 1.) Theoretical aspects

Two lecture notes describe recent developments of evolutionary multi objective optimization (MO) techniques in detail and their advantages and drawbacks compared to traditional deterministic optimisers. The role of Game Strategies (GS), such as Pareto, Nash or Stackelberg games as companions or pre-conditioners of Multi objective Optimizers is presented and discussed on simple mathematical functions in Part I , as well as their implementations on simple aeronautical model optimisation problems on the computer using a friendly design framework in Part II. Real life (robust) design applications dealing with UAVs systems or Civil Aircraft and using the EAs and Game Strategies combined material of Part I & Part II are solved and discussed in Part III providing the designer new compromised solutions useful to digital aircraft design and manufacturing. Many details related to Lectures notes Part I, Part II and Part III can be found by the reader in [68].

Practical aspects of frequency-domain identification of dynamic models of marine structures from hydrodynamic data

The motion response of marine structures in waves can be studied using finite-dimensional linear-time-invariant approximating models. These models, obtained using system identification with data computed by hydrodynamic codes, find application in offshore training simulators, hardware-in-the-loop simulators for positioning control testing, and also in initial designs of wave-energy conversion devices. Different proposals have appeared in the literature to address the identification problem in both time and frequency domains, and recent work has highlighted the superiority of the frequency-domain methods. This paper summarises practical frequency-domain estimation algorithms that use constraints on model structure and parameters to refine the search of approximating parametric models. Practical issues associated with the identification are discussed, including the influence of radiation model accuracy in force-to-motion models, which are usually the ultimate modelling objective. The illustration examples in the paper are obtained using a freely available MATLAB toolbox developed by the authors, which implements the estimation algorithms described.

Computational aspects of probabilistic assessment of UAS robust autonomy

As the level of autonomy in Unmanned Aircraft Systems (UAS) increases, there is an imperative need for developing methods to assess robust autonomy. This paper focuses on the computations that lead to a set of measures of robust autonomy. These measures are the probabilities that selected performance indices related to the mission requirements and airframe capabilities remain within regions of acceptable performance.

What aspects of demographic, personality, attitudes, and perceptions of law enforcement influence self-reported likelihood of drink driving?

The aim of the current study was to examine the associations between a number of individual factors (demographic factors (age and gender), personality factors, risk-taking propensity, attitudes towards drink driving, and perceived legitimacy of drink driving enforcement) and how they influence the self-reported likelihood of drink driving. The second aim of this study was to examine the potential of attitudes mediating the relationship between risk-taking and self-reported likelihood of drink driving. In total, 293 Queensland drivers volunteered to participate in an online survey that assessed their self-reported likelihood to drink drive in the next month, demographics, traffic-related demographics, personality factors, risk-taking propensity, attitudes towards drink driving, and perceived legitimacy of drink driving enforcement. An ordered logistic regression analysis was utilised to evaluate the first aim of the study; at the first step the demographic variables were entered; at step two the personality and risk-taking were entered; at the third step, the attitudes and perceptions of legitimacy variables were entered. Being a younger driver and having a high risk-taking propensity were related to self-reported likelihood of drink driving. However, when the attitudes variable was entered, these individual factors were no longer significant; with attitudes being the most important predictor of self-reported drink driving likelihood. A significant mediation model was found with the second aim of the study, such that attitudes mediated the relationship between risk-taking and self-reported likelihood of drink driving. Considerable effort and resources are utilised by traffic authorities to reducing drink driving on the Australian road network. Notwithstanding these efforts, some participants still had some positive attitudes towards drink driving and reported that they were likely to drink drive in the future. These findings suggest that more work is needed to address attitudes regarding the dangerousness of drink driving.

Genetic aspects of the organization of legumin genes in pea

We have compared physical and genetic maps of the region around the legJ gene in pea. In this vicinity there are four B-type legumin genes, arranged as two close pairs. The detection of a recombination event within this gene cluster allows the orientation of this group of genes within the surrounding linkage group to be determined. The relationship between physical and genetic distances in this region is discussed, as are the implications of this for relating physical and genetic maps elsewhere in the pea genome.

Quality aspects in service ecosystems : areas for exploitation and exploration

Service Science, Management, and Engineering (SSME) is a research area with significant relevance to research and practice. Networked systems of web services are a field of service science that enjoys growing interest from researchers. The complex and dynamic environment of these service ecosystems poses new requirements on quality management that are insufficiently addressed by current approaches that focus mainly on the technical aspects of quality. This focus is a severe limitation for the development of service networks because it neglects perceived service quality from the viewpoint of service consumers. In this paper we propose a reference model for quality management in service ecosystems. This reference model is linked in particular to innovation and new service development. Towards the end we propose premises for the implementation and outline a future research agenda.

Designing and evaluating an online role play in conflict management

Purpose This paper aims to identify, through a literature review, key issues regarding how online role plays can be designed and to apply them when designing a role play on conflict management. Design/methodology/approach By drawing on the key issues identified in the literature review, a role play on conflict management was designed and evaluated. Data were collected by developing a survey that focused on perceived learning, participation and satisfaction. Findings Overall, a majority of the students felt that they learned and participated in the role play. The most positive finding was that the students were satisfied with their role play experience. Research limitations/implications Researchers are urged to further develop the dimensions and measures of online role play success. The measures that were developed for evaluating perceived learning, participation and satisfaction with role plays can be further developed and tested. It is suggested that the effects on learning need to be further explored. Practical implications It is suggested that teachers take the identified key issues of online role play design into account. An important challenge seems to be to encourage students to reflect and do additional reading and research in relation with online role plays. Originality/value Online collaboration is commonly argued as beneficial from an e-learning perspective. However, a challenge for research and practice is to learn how collaborative e-learning activities may be developed. This paper contributes by focusing on how online role plays can be designed and evaluated.

Losing sleep : examining the cascading effects of supervisors' experience of injustice on subordinates' psychological health

In this paper, we identify two types of injustice as antecedents of abusive supervision and ultimately of subordinate psychological distress and insomnia. We examine distributive justice (an individual's evaluation of their input to output ratio compared to relevant others) and interactional injustice (the quality of interpersonal treatment received when procedures are implemented). Using a sample of Filipinos in a variety of occupations, we identify two types of injustice experienced by supervisors as stressors that provoke them to display abusive supervision to their subordinates. We examine two consequences of abusive supervision - subordinate psychological distress and insomnia. In addition, we identify two moderators of these relationships, namely, supervisor distress and subordinate self-esteem. We collected survey data from multiple sources including subordinates, their supervisors, and their partners. Data were obtained from 175 matched supervisor-subordinate dyads over a 6-month period, with subordinates' partners providing ratings of insomnia. Results of structural equation modelling analyses provided support for an indirect effects model in which supervisors' experience of unfair treatment cascades down the organization, resulting in subordinate psychological distress and, ultimately in their insomnia. In addition, results partially supported the proposed moderated relationships in the cascading model. © 2010 Taylor & Francis.

Explaining psychological distress in the legal profession: the role of overcommitment

The purpose of this study was to explain previously reported high levels of psychological distress in lawyers. General demands (i.e., time pressure and emotional demands) and lawyer demands (i.e., emphasis on profits and competitiveness), as well as three resources (i.e., control, pay, and praise) were examined, along with the moderating role of overcommitment. Participants included 448 Australian lawyers who completed an online questionnaire distributed to them by their state or territory law society. Results revealed significant direct relationships between the demands, resources, and overcommitment on depression and anxiety. Significant two-way interactions indicated that the positive relationship of general demands on depression and anxiety were more marked for high overcommitted lawyers, as was the negative relationship of pay on anxiety. Contrary to predictions for the three-way interaction, in the presence of high general demands, there was a trend to suggest that high control was positively related to psychological distress for high overcommitted lawyers. The theoretical and practical implications of these results, including the importance of identifying overcommitted lawyers and developing preventive interventions to reduce overcommitment prior to the development of strain, are discussed.

The use of uniaxial and triaxial accelerometers to measure children's "free-play" physical activity

In order to effectively measure the physical activity of children, objective monitoring devices must be able to quantify the intermittent and nonlinear movement of free play. The purpose of this study was to investigate the validity of the Computer Science and Applications (CSA) uniaxial accelerometer and the TriTrac-R3D triaxial accelerometer with respect to their ability to measure 8 "free-play" activities of different intensity. The activities ranged from light to very vigorous in intensity and included activities such as throwing and catching, hopscotch, and basketball. Twenty-eight children, ages 9 to 11, wore a CSA and a heart rate monitor while performing the activities. Sixteen children also wore a Tritrac. Counts from the CSA, Tritrac, and heart rates corresponding to the last 3 min of the 5 min spent at each activity were averaged and used in correlation analyses. Across all 8 activities, Tritrac counts were significantly correlated with predicted MET level (r= 0.69) and heart rate (r= 0.73). Correlations between CSA output, predicted MET level (0.43), and heart rate (0.64) were also significant but were lower than those observed for the Tritrac. These data indicate that accelerometers are an appropriate methodology for measuring children's free-play physical activities.

Blind Collaboration

This paper examines the creation, development and implementation of an artistic process termed by the author ‘Blind Collaboration’. The process involves musicians collaborating on an album of contemporary music where they, the collaborators, do not see or hear each other nor record in the same studio at the same time as their fellow musicians. The notion of musicians recording separately or indeed remotely is not new, however what is new is the ‘blind’ aspect of the process. Each musician is completely unaware of any others’ contributions, and is therefore uninfluenced by what the others might play. None of the musicians hears the overall result until the final mix. The principal focus of this case study lies in the analysis of specific aspects and outcomes of the creative/artistic process - how it evolved, how it was managed, how it was influenced by the particular artists involved and how the Blind Collaboration process ultimately shaped the final musical work.