Optimization of lipase production from yeasts strains isolated from olive mil wastewater

Dissertação submetida à Universidade de Lisboa, Faculdade de Ciências para a obtenção do Grau de Mestre em Microbiologia Aplicada.

A more reliable PCR for detection of Mycobacterium tuberculosis in clinical samples

Diagnostic techniques based on PCR have two major problems: false-positive reactions due to contamination with DNA fragments from previous PCRs (amplicons) and false-negative reactions caused by inhibitors that interfere with the PCR. We have improved our previously reported PCR based on the amplification of a fragment of the Mycobacterium tuberculosis complex-specific insertion element IS6110 with respect to both problems. False-positive reactions caused by amplicon contamination were prevented by the use of uracil-N-glycosylase and dUTP instead of dTTP. We selected a new set of primers outside the region spanned by the formerly used primers to avoid false-positive reactions caused by dTTP-containing amplicons still present in the laboratory. With this new primer set, 16 copies of the IS6110 insertion element, the equivalent of two bacteria, could be amplified 10(10) times in 40 cycles, resulting in a mean efficiency of 77% per cycle. To detect the presence of inhibitors of the Taq polymerase, which may cause false-negative reactions, part of each sample was spiked with M. tuberculosis DNA. The DNA purification method using guanidinium thiocyanate and diatoms effectively removed most or all inhibitors of the PCR. However, this was not suitable for blood samples, for which we developed a proteinase K treatment followed by phenol-chloroform extraction. This method permitted detection of 20 M. tuberculosis bacteria per ml of whole blood. Various laboratory procedures were introduced to reduce failure or inhibition of PCR and avoid DNA cross contamination. We have tested 218 different clinical specimens obtained from patients suspected of having tuberculosis. The samples included sputum (n=145), tissue biopsy samples (n=25), cerebrospinal fluid (n=15), blood (n=14), pleural fluid (n=9), feces, (n=7), fluid from fistulae (n=2), and pus from a wound (n=1). The results obtained by PCR were consistent with those obtained with culture, which is the "gold standard." We demonstrate that PCR is a useful technique for the rapid diagnosis of tuberculosis at various sites.

Titanium dioxide based nanomaterials for photocatalytic water treatment

Water treatment using photocatalysis has gained extensive attention in recent years. Photocatalysis is promising technology from green chemistry point of view. The most widely studied and used photocatalyst for decomposition of pollutants in water under ultraviolet irradiation is TiO2 because it is not toxic, relatively cheap and highly active in various reactions. Within this thesis unmodified and modified TiO2 materials (powders and thin films) were prepared. Physico-chemical properties of photocatalytic materials were characterized with UV-visible spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), ellipsometry, time-of-flight secondary ion mass spectrometry (ToF-SIMS), Raman spectroscopy, goniometry, diffuse reflectance measurements, thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. Photocatalytic activity of prepared samples in aqueous environment was tested using model compounds such as phenol, formic acid and metazachlor. Also purification of real pulp and paper wastewater effluent was studied. Concentration of chosen pollutants was measured with high pressure liquid chromatography (HPLC). Mineralization and oxidation of organic contaminants were monitored with total organic carbon (TOC) and chemical oxygen demand (COD) analysis. Titanium dioxide powders prepared via sol-gel method and doped with dysprosium and praseodymium were photocatalytically active for decomposition of metazachlor. The highest degradation rate of metazachlor was observed when Pr-TiO2 treated at 450ºC (8h) was used. The photocatalytic LED-based treatment of wastewater effluent from plywood mill using commercially available TiO2 was demonstrated to be promising post-treatment method (72% of COD and 60% of TOC was decreased after 60 min of irradiation). The TiO2 coatings prepared by atomic layer deposition technique on aluminium foam were photocatalytically active for degradation of formic and phenol, however suppression of activity was observed. Photocatalytic activity of TiO2/SiO2 films doped with gold bipyramid-like nanoparticles was about two times higher than reference, which was not the case when gold nanospheres were used.

Potencial antifúngico, antioxidante e inibidor da produção de aflatoxina por extratos fenólicos de Chlorella sp. e Spirulina platensis

A contaminação fúngica acarreta alterações na qualidade nutricional e no valor econômico de produtos alimentícios podendo causar danos patológicos em plantas, animais e humanos. A identificação da atividade antioxidante, antifúngica e antimicotoxinas, em extratos de microalgas com propriedade de inibir a multiplicação de fungos e subseqüente produção de micotoxinas abre a perspectiva de empregar substâncias mais eficientes e com maior ação específica contra estes microorganismos. Entre os compostos com propriedades inibidoras de radicais livres, de crescimento fúngico e produção de micotoxinas, destacam-se os compostos fenólicos, que podem inibir a atividade metabólica microbiana, dificultando a atividade de enzimas. Neste estudo foram avaliados o poder de inibição de multiplicação fúngica de Rhizopus oryzae e Aspergillus flavus pelos extratos fenólicos de Chlorella sp. e Spirulina platensis, bem como sua atividade antioxidante, e a atividade antimicotoxinas da última microalga contra Aspergillus flavus. O conteúdo de fenóis totais foi em média 1000 µgfenóis/g Spirulina platensis e 600 µgfenóis/g Chlorella sp., sendo que o acido gálico e o cafeíco foram identificados como compostos majoritários na Spirulina platensis. As determinações de glicosamina (parede celular) e ergosterol (membrana celular) mostraram-se bons indicativos do desenvolvimento microbiano permitindo uma boa estimativa da inibição dele. O extrato fenólico de Spirulina platensis apresentou capacidade de inibir cerca de 50% a formação da parede e da membrana celular para ambos os fungos estudados e de 100% a produção de aflatoxina B1 até o 10º dia de cultivo do Aspergillus flavus. Além disso, o extrato metanólico de Spirulina platensis inativou 53,5% o DPPH reativo, limitou o escurecimento enzimático ocasionado pela peroxidase em 55% e inibiu a peroxidação lipídica em 46% após 14 dias de armazenamento sob luz. Estes resultados mostram que a ação antifúngica, antimicotoxinas e antioxidante está naturalmente presente em alguns tecidos microbianos e que encontrar a forma de extraí-los e aplicá-los como conservantes alimentícios é muito promissor para substituição aos antifúngicos e outros conservantes químicos.

Population genetic structure of Neogobius caspius (Eichwald ,1831) in the South Caspian Sea using PCR-RFLP Marker

Neogobius caspius is a small benthic fish that is native to the Caspian Sea. The importance of this fish is because of it is role as a main food resource of the sturgeon fish. The genetic diversity of N. caspius population in the Caspian Sea was studied using PCR- RFLP technique. A total of 135 samples of N. caspius were collected from coastal line in the north Caspian sea, including specimens from coasts of Anzali , Torkman Port and Chalus. Genomic DNA was extracted by phenol-chloroform method and then was amplified using a pair primer of cytochrom b gene, 2 tRNA gene and the control region sequences by a thermal cycler. D2 (5'-CCGGAGTATGTAGGGCATTCTCAC-3'), CY1 (5'-YYTAACCRRGACYAATGACTTGA-3') 12 restriction enzyme were used to digest the target gene region including: Alul HincII —Tas1 —Rsa1 -MboI -DraI -BSeNI(BSRI) Alw261(BsmAI). Bsul 51 Hin11 Bsh12851- BsuRI(HaeIII) digested PCR products were observed by silver staining method followed by Polyacrylamide gel electrophoresis (PAGE). The results were shown the same pattern among the species. There was no polymorphism and no differentiation in population in the Neogobius caspius fish and all individuals have shown homogenous genotype.

Odour flux from litter of broiler chickens fed diets differing in protein levels and additives

The effect of dietary crude protein (CP) and additives on odour flux from broiler litter was investigated using 180 day-old Ross 308 male chicks randomly allocated to five dietary treatments with three replications of 12 birds each. A 5×3 factorial arrangement of treatments was employed. Factors were: diet (low CP, high CP, high CP+antibiotic, high CP+probiotic, high CP+saponin) and age (15, 29, 35 days). Low CP (LCP) and high CP (HCP) diets differed in CP levels by 4.5-5%. The low CP diets were supplemented with L-valine, L-isoleucine, L-arginine, L-lysine, D,L-methionine and L-threonine. The antibiotic used was Zn Bacitracin, the probiotic was a blend of three Bacillus subtilis strains and the saponin came from a blend of Yucca and Quillaja. Odorants were measured from litter headspace using a flux hood and selective ion flow tube mass spectrometry (SIFT-MS). Results were log tranformed and analysed by two-way ANOVA with repeated measures using JMP statistical software v.8, and means were separated by Tukey's HSD test at P<0.05.The results showed that LCP group produced lower flux of dimethyl amine, trimethyl amine, H2S, NH3 and phenol in litter compared to HCP group (P<0.05). Similarly, HCP+probiotic group produced lower flux of H2S (P<0.05) and HCP+saponin group produced lower flux of trimethylamine and phenol in litter compared to HCP group (P<0.05). The dietary treatments tended (P=0.065) to have higher flux of methanethiol in HCP group compared to others. There was a diet x age interaction for litter flux of diacetyl, acetoin, 3-methyl-1-butanol, 3-methylbutanal, ethanethiol, propionic acid and hexane (P<0.05). Concentrations of diacetyl, acetoin, propionic acid and hexane in litter were higher from LCP group compared to all other treatments on d 35 (P<0.05) but not on days 15 and 29. Thus, the low CP diet, Bacillus subtilis based probiotic and Yucca/Quillaja based saponin were effective in reducing the emissions of some key odorants from broiler litter.

Characterisation and quantification of changes in odorants from litter headspace of meat chickens fed diets varying in protein levels and additives

The effect of dietary crude protein (CP) and additives on odor flux from meat chicken litter was investigated using 180 day-old Ross 308 male chicks randomly allocated to five dietary treatments with three replicates of 12 birds each. A 5 × 3 factorial arrangement of treatments was employed. Factors were: diet (low CP, high CP, high CP+antibiotic, high CP+probiotic, high CP+saponin) and age (15, 29, 35 days). The antibiotic used was Zn bacitracin, the probiotic was a blend of three Bacillus subtilis strains and the saponin came from a blend of Yucca and Quillaja. Odorants were collected from litter headspace with a flux hood and measured using selective ion flow tube mass spectrometry (SIFT-MS). Litter moisture, water activity (Aw), and litter headspace odorant concentrations were correlated. The results showed that low CP group produced lower flux of dimethyl amine, trimethyl amine, H2S, NH3, and phenol in litter compared to high CP group (P < 0.05). Similarly, high CP+probiotic group produced lower flux of H2S (P < 0.05) and high CP+saponin group produced lower flux of trimethylamine and phenol in litter compared to high CP group (P < 0.05). The dietary treatments tended (P = 0.065) to have higher flux of methanethiol in high CP group compared to others. There was a diet × age interaction for litter flux of diacetyl, 3-hydroxy-2-butanone (acetoin), 3-methyl-1-butanol, 3-methylbutanal, ethanethiol, propionic acid, and hexane (P < 0.05). Concentrations of diacetyl, acetoin, propionic acid, and hexane in litter were higher from low CP group compared to all other treatments on d 35 (P < 0.05) but not on d 15 and 29. A high litter moisture increased water activity (P < 0.01) and favored the emissions of methyl mercaptan, hydrogen sulfide, dimethyl sulfide, ammonia, trimethyl amine, phenol, indole, and 3-methylindole over others. Thus, the low CP diet, Bacillus subtilis based probiotic and the blend of Yucca/Quillaja saponin were effective in reducing the emissions of some key odorants from meat chicken litter.

Descrição do resistoma de solo de Cerrado stricto sensu e o potencial de dioxigenases metagenômicas na resistência antimicrobiana e em processos de biorremediação

Tese (doutorado)—Universidade de Brasília, Instituto de Ciências Biológicas, Programa de Pós-Graduação em Biologia Molecular, 2016.

Mesoestruturas porosas a partir de materiais naturais

The MCM-41 mesoporous synthesis was done using rice hulls ash and chrysotile as natural alternative silica sources. For the using of these sources, chemical and thermic treatments were done in both materials. After chemical and thermic treatments, these materials were employed on the MCM-41 mesoctructures synthesis. The natural materials treated and employed in the synthesis were characterized by several techniques such as X-ray diffraction, N2 adsorption and desorption, scanning electronic microscopy and thermogravimetric analysis. MCM-41 standart samples synthetized with aerosil 200 commercial sílica were used to evaluation. The formed material from rice hulls ash showed values from BET specific area about 468 m².g-1, N2 adsorption and desorption isotherms and loss mass similar to reference materials. The silica from chrysotile calcined and leached was employed to mesoporous materials synthesis. The BET specific area showed values about 700 m².g-1, N2 adsorption and desorption isotherms type IV and loss mass similar to mesoporous materials. The formed material from calcined and leached chrysotile, without calcination, applied to phenol remotion carried high performance liquid chromatography and evaluated with organophilic clays with different treatments. By the characterization techniques were proved that mesoporous materials with lesser order that reference samples. The material formed from rice hulls ash without the calcination step achieved better adsorption results than organophilic clays

DNA extraction and RAPD markers to assess the genetic similarity among Gelidium sesquipedale (Rhodophyta) populations

A simple method developed for genomic DNA isolation from fungus was tested on the red alga, Gelidium sesquipedale (Clem.) Born et Thur., which is commercially exploited for its high sulfated polysaccharide (agar) content. This method is faster, cheaper, and less toxic than conventional phenol/chloroform methods. Random amplified polymorphic DNA (RAPD) amplifications were performed successfully without the necessity of purifying the DNA. RAPD markers were used to investigate the genetic similarity among three natural populations of G. sesquipedale from southern Portugal. Bulked-genomic DNA samples of 15 different individuals were made in each population. These can be conceived of as a sample of the population DNA. Of the 62 primers screened, 41 produced bands and 22 revealed polymorphisms. Genetic similarities among populations were high. Populations that are further away from each other have the lowest similarity coefficients, whereas the intermediate Ingrina population, located on the south coast, showed higher genetic similarity with the Odeceixe population located on the southwest coast, than with the Sao Rafael southern population. This suggests a higher genetic flow between Odeceixe and Ingrina or the result may be a founder effect in the sense that the species has propagated from the east coast to the south coast of Portugal. We conclude that the use of this isolation method with RAPD analysis is appropriate to characterize the genetic variability of this commercial species along its geographical distribution. Large sample sizes can be screened at a relatively low cost. Finding genetic markers for commercial populations of C. sesquipedale may be of industrial interest.

Preconcentration of polar phenolic compounds from water samples and soil extract by liquid-phase microextraction and determination via liquid chromatography with ultraviolet detection.

2016

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Estudo de reatores eletroquímicos para remoção de Cu2+ , Zn2+, Fenol e BTEX em água produzida

The production of water has become one of the most important wastes in the petroleum industry, specifically in the up stream segment. The treatment of this kind of effluents is complex and normally requires high costs. In this context, the electrochemical treatment emerges as an alternative methodology for treating the wastewaters. It employs electrochemical reactions to increase the capability and efficiency of the traditional chemical treatments for associated produced water. The use of electrochemical reactors can be effective with small changes in traditional treatments, generally not representing a significant additional surface area for new equipments (due to the high cost of square meter on offshore platforms) and also it can use almost the same equipments, in continuous or batch flow, without others high costs investments. Electrochemical treatment causes low environmental impact, because the process uses electrons as reagent and generates small amount of wastes. In this work, it was studied two types of electrochemical reactors: eletroflocculation and eletroflotation, with the aim of removing of Cu2+, Zn2+, phenol and BTEX mixture of produced water. In eletroflocculation, an electrical potential was applied to an aqueous solution containing NaCl. For this, it was used iron electrodes, which promote the dissolution of metal ions, generating Fe2+ and gases which, in appropriate pH, promote also clotting-flocculation reactions, removing Cu2+ and Zn2+. In eletroflotation, a carbon steel cathode and a DSA type anode (Ti/TiO2-RuO2-SnO2) were used in a NaCl solution. It was applied an electrical current, producing strong oxidant agents as Cl2 and HOCl, increasing the degradation rate of BTEX and phenol. Under different flow rates, the Zn2+ was removed by electrodeposition or by ZnOH formation, due the increasing of pH during the reaction. To better understand the electrochemical process, a statistical protocol factor (22) with central point was conducted to analyze the sensitivity of operating parameters on removing Zn2+ by eletroflotation, confirming that the current density affected the process negatively and the flow rate positively. For economical viability of these two electrochemical treatments, the energy consumption was calculated, taking in account the kWh given by ANEEL. The treatment cost obtained were quite attractive in comparison with the current treatments used in Rio Grande do Norte state. In addition, it could still be reduced for the case of using other alternative energy source such as solar, wind or gas generated directly from the Petrochemical Plant or offshore platforms

Rejeito de xisto como adsorvente para remoção de fenol em águas produzidas na indústria de petróleo

Produced water is the main effluent linked to the activity of extraction of oil and their caring management is necessary due to the large volume involved, to ensure to minimize the negative impacts of discharges of these waters in the environment. This study aimed to analyze the use of retorted shale, which is a reject from the pyrolysis of pirobituminous shale, as adsorbent for the removal of phenols in produced water. The material was characterized by different techniques (grain sized analysis, thermal analysis, BET, FRX, FT-IR, XRD and SEM), showing the heterogeneity in their composition, showing its potential for the removal of varied compounds, as well as the phenols and their derivatives. For the analysis of the efficiency of the oil shale for the adsorption process, assays of adsorption balance were carried through, and also kinetic studies and dynamics adsorption, in the ETE of the UTPF of Petrobras, in Guamaré-RN. The balance assays shown a bigger conformity with the model of Langmuir and the kinetic model more adjusted to describe the adsorption of phenols in retorted shale was of pseudo-second order. The retorted shale presented a low capacity of adsorption of phenols (1,3mg/g), when related to others conventional adsorbents, however it is enough to the removal of these composites in concentrations presented in the produced water of the UTPF of Guamaré. The assays of dynamics adsorption in field had shown that the concentration of phenol in the effluent was null until reaching its rupture (58 hours). The results showed the possibility of use of the reject for removal of phenols in the final operations of the treatment process, removing as well, satisfactorily, the color and turbidity of the produced water, with more than 90% of removal

DNA extraction and RAPD markers to assess the genetic similarity among Gelidium sesquipedale (Rhodophyta) populations

A simple method developed for genomic DNA isolation from fungus was tested on the red alga, Gelidium sesquipedale (Clem.) Born et Thur., which is commercially exploited for its high sulfated polysaccharide (agar) content. This method is faster, cheaper, and less toxic than conventional phenol/chloroform methods. Random amplified polymorphic DNA (RAPD) amplifications were performed successfully without the necessity of purifying the DNA. RAPD markers were used to investigate the genetic similarity among three natural populations of G. sesquipedale from southern Portugal. Bulked-genomic DNA samples of 15 different individuals were made in each population. These can be conceived of as a sample of the population DNA. Of the 62 primers screened, 41 produced bands and 22 revealed polymorphisms. Genetic similarities among populations were high. Populations that are further away from each other have the lowest similarity coefficients, whereas the intermediate Ingrina population, located on the south coast, showed higher genetic similarity with the Odeceixe population located on the southwest coast, than with the Sao Rafael southern population. This suggests a higher genetic flow between Odeceixe and Ingrina or the result may be a founder effect in the sense that the species has propagated from the east coast to the south coast of Portugal. We conclude that the use of this isolation method with RAPD analysis is appropriate to characterize the genetic variability of this commercial species along its geographical distribution. Large sample sizes can be screened at a relatively low cost. Finding genetic markers for commercial populations of C. sesquipedale may be of industrial interest.