Estudo das propriedades físico-químicas do biodiesel e suas influências na deterioração dos elastômeros aplicados no sistema de injeção dos motores diesel

The biodiesel use has become important due to its renewable character and to reduce environmental impacts during the fuel burning. Theses benefit will be valid if the fuel shows good performance, chemistry stability and compatibility with engines. Biodiesel is a good fuel to diesel engines due to its lubricity. Then, the aimed of this study was to verify the physicalchemistry properties of biodiesel and their correlations with possible elastomers damage after biodiesel be used as fuel in an injection system. The methodology was divided in three steps: biodiesels synthesis by transesterification of three vegetable oil (soybean, palm and sunflower) and their physical-chemistry characterization (viscosity, oxidative stability, flash point, acidity, humidity and density); pressurized test of compatibility between elastomers (NBR and VITON) and biodiesel, and the last one, analyze of biodiesels lubricity by tribological test ball-plan( HFRR). Also, the effect of mixture of biodiesel and diesel in different concentrations was evaluated. The results showed that VITON showed better compatibility with all biodiesel blends in relation to NBR, however when VITON had contact with sunflower biodiesel and its blends the swelling degree suffer higher influences due to biodiesel humidity. For others biodiesels and theirs blends, this elastomer kept its mechanical properties constant. The better tribological performance was observed for blends with high biodiesel concentration, lower friction coefficient was obtained when palm biodiesel was used. The main mechanisms observed during the HFRR tests were abrasive and oxidative wear

Viabilidade do uso de secadores solar de convecção natural e forçada para a secagem do coco Licuri

Licuri is a palm tree from the semiarid regions of Bahia State, Brazil. It is an important source of food and feed in that region, since their nuts are commonly eaten by humans and used as maize substitute for poultry feeding. The aim of this dissertation is to study the feasibility for use of natural convection solar dryers and forced being compared with the traditional drying outdoors for drying coconut licuri Syagrus coronate. The study led to the construction of two prototype solar dryer for carrying out experiments proving: model Solar Drying System Direct Exposure to Natural Convection built with wood, has a drying chamber with direct cover transparent glass laminates 4 mm, using techniques for proper isolation of the drying chamber. The two prototypes were comparatively analyzed for performance and drying efficiency with traditional extractive use by the community. Were evaluated the variables: time and drying rates and quality of the final samples of coconut licuri. The fruits were harvested and brought the town of Ouricuri, in the city of Caldeirão Grande, BA for the experiments comparing the three methods of drying was used a standard load of 4.0 kg The quantitative analysis for the result of the drying rate was found in 74% yield and 44% for natural and forced convection respectively compared with the traditional drying. These drying rates represent variation 3-5 times lower. Drying using forced convection licuri showed better quality, was found in a reddish pulp, representing the quantities that were kept of the nutrient beta carotene, and not notice the flavor change from the previous system, the final cost of construction of this system were higher . The prototypes built competitive advantage and had testified fully to resolve the technical difficulties previously encountered in the production of products made of coconut licuri. Allowing add value and increase their potential use for the fruit extractive communities of semi-arid region of Bahia

Desidratação de sementes de quatro lotes de pupunheira: efeitos sobre a germinação e o vigor

Com o objetivo de verificar o efeito da desidratação sobre a germinação e o vigor de sementes de pupunheira inerme (Bactris gasipaes Kunth), quatro lotes de sementes, colhidos nas localidades de Yurimaguas, Peru; Camamu e Piraí do Norte, BA e Pindorama, SP, foram submetidos à secagem em câmara seca a partir das testemunhas não desidratadas, retirando-se amostras a cada 24 horas. O efeito da desidratação sobre a qualidade das sementes foi avaliado por meio de teste de germinação (184 dias da semeadura, em vermiculita, 20-30ºC), primeira contagem de germinação (36 dias), velocidade de germinação e teor de água das sementes. Comprovou-se que sementes dessa espécie são sensíveis à desidratação, com germinação inicial alta (59 a 84%) quando não desidratadas (47 a 38% de umidade inicial). Teores de água abaixo da faixa de 28 a 23% reduziram significativamente a germinação e o vigor. Todas as sementes com teores de umidade abaixo de 15% (lotes 2 e 4) e 13% (lotes 1 e 3) morreram.

Qualidade fisiológica de sementes de palmiteiro-vermelho em função da desidratação e do armazenamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Umedecimento do substrato na emergência e vigor de plântulas de pupunheira

A germinação rápida e uniforme das sementes, seguida por pronta emergência das plântulas são características altamente desejáveis na formação de mudas. O objetivo deste trabalho foi verificar o efeito de diferentes níveis de umedecimento do substrato vermiculita sobre a porcentagem de emergência e o vigor de plântulas de pupunheira. O umedecimento da vermiculita com água nas quantidades de 60 a 90 ml/100 g de substrato (de 0,6 a 0,9 x o peso deste em água ou 77,6 a 86,7% da capacidade de retenção do substrato em água, respectivamente) resultaram na maior porcentagem de emergência das plântulas. O umedecimento com 90 ml água/100 g de vermiculita resultou em maior velocidade de emergência e vigor de plântulas (comprimento, diâmetro e massa).

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Hydrogen production utilizing glycerol from renewable feedstocks-The case of Brazil

Various reports concerning catalytic reaction of glycerol for hydrogen production is available. However, economic analyses of this activity are not found yet. The objective of this work is to evaluate the process of hydrogen production via steam reforming of glycerol obtained through transesterification process of bio-oils. The thermochemical process of steam reforming process was determined due to high efficiency, feasibility and lower cost of design, development, operation and maintenance. These bio-oils come from feedstocks largely encountered in Brazil such as soybean, palm, castor bean, peanut and cotton seed as also come from residues such as defective coffee, tallow beef, wastewater (scum) and others. Various findings were obtained such as potential of production of glycerol utilizing residues (considering available amounts in the Brazilian states) and some vegetable feedstocks (considering production of harvested feedstock per hectare). Subsequently, production of hydrogen via steam reforming of generated glycerol, and foreseen electricity production via fuel cells were also determined. An additional estimation was paid for production of H-BIO, an innovative fuel developed by PETROBRAS (Petroleo Brasileiro S.A.), where hydrogen and bio-fuel are utilized and generates propane as co-product. About this work, it was concluded that high amounts of hydrogen and electricity could be produced considering an enormous potential from each cited feedstock being an attractive alternative as distributed electricity source and as an additional source for some activities, inclusively those that produce their own feedstocks such as abattoirs (beef tallow), and wastewater treatment plants. (C) 2010 Elsevier Ltd. All rights reserved.

Efeito de aditivos no valor nutritivo de silagens feitas com subproduto da extração do palmito de pupunha (Bactris gasipaes H.B.K.)

O objetivo deste experimento foi determinar a qualidade e o valor nutritivo de silagens do subproduto da pupunha, produzidas com aditivos, conforme os tratamentos: T1 - Testemunha (sem aditivo); T2 - Adição de 2,5% de açúcar; T3 - Adição de 10,0% de polpa cítrica e T4 - Adição de 10,0% de milho moído, base da matéria natural. Verificou-se que a adição 10% de polpa cítrica (PC) ou milho moído (MM) elevou o teor de matéria seca da massa a ser ensilada, bem como da silagem, em 6,5 e 8,0 unidades percentuais, respectivamente. Silagens com aditivos apresentaram menores valores de nitrogênio amoniacal (N-NH3 / NT) e pH. O consumo de matéria seca foi maior para as silagens feitas com PC ou MM, atingindo 85 g/kg PV0,75 ou 2,1% do PV, contra 44,7 g/kgPV0,75 ou 1,12%, para as silagens sem aditivo ou com 2,5% de açúcar. O coeficiente de digestibilidade aparente da matéria seca, também foi superior para as silagens contendo 10% de PC ou MM (65,0%) em relação à média das demais (52,0%). A digestibilidade da parede celular não mostrou tendência definida em função dos tratamentos. A silagem de subproduto da pupunha feita com a adição de 10% de polpa cítrica ou milho moído, apresentou valor nutritivo semelhante às silagens de forrageiras convencionais.

Avaliação da estabilidade térmica e oxidativa dos biodieseis de algodão, girassol, dendê e sebo bovino

The search for new sources of environmentally friendly energy is growing every day. Among these alternative energies, biodiesel is a biofuel that has had prominence in world production. In Brazil, law 11.097, determine that all diesel sold in the country must be made by mixing diesel/biodiesel. The latter called BX, , where X represents the percent volume of biodiesel in the diesel oil, as specified by the ANP. In order to guarantee the quality of biodiesel and its mixtures, the main properties which should be controlled are the thermal and oxidative stability. These properties depend mainly of the chemical composition on the raw materials used to prepare the biodiesel. This dissertation aims to study the overall thermal and oxidative stability of biodiesel derived from cotton seed oil, sunflower oil, palm oil and beef tallow, as well as analyze the properties of the blends made from mineral oil and biodiesel in proportion B10. The main physical-chemical properties of oils and animal fat, their respective B100 and blends were determined. The samples were characterized by infrared and gas chromatography (GC). The study of thermal and oxidative stability were performed by thermogravimetry (TG), pressure differential scanning calorimeter (PDSC) and Rancimat. The obtained biodiesel samples are within the specifications established by ANP Resolution number 7/2008. In addition, all the blends and mineral diesel analyzed presented in conformed withthe ANP Regularion specifications number 15/2006. The obtained results from TG curves data indicated that the cotton biodiesel is the more stable combustible. In the kinetic study, we obtained the following order of apparent activation energy for the samples: biodiesel from palm oil > sunflower biodiesel > tallow biodiesel > cotton biodiesel. In terms of the oxidative stability, the two methods studied showed that biodiesel from palm oil is more stable then the tallow. Within the B100 samples studied only the latter were tound to be within the standard required by ANP resolution N° 7. Testing was carried out according to the EN14112. This higher stability its chemical composition

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Parcelamento da adubação e da fertirrigação na produção de palmito pupunha no Noroeste Paulista

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seed dispersal and spatial distribution of Attalea geraensis (Arecaceae) in two remnants of Cerrado in Southeastern Brazil

The seed dispersal system of Attalea geraensis (Arecaceae), an acaulescent palm, was investigated during one year in two Cerrado fragments in the state of São Paulo, southeastern Brazil. A. geraensis had inflorescences and infrutescences throughout the year. Two scatter-hoarding rodents (the spiny rat, Clyomys bishopi and agoutis, Dasyptocta azarae) were identified as seed predators/dispersers, able to move seeds up to 30 in from the palms, although most of the fruits (57.5%) were dispersed less than 2 in. The removal rates were high and after 20 days, 97.2% of the fruits were removed. Fruit fate was not related to fruit mass, length and diameter. The application of Morisita's index showed a more clumped distribution of adults in the smaller fragment, probably because of the absence of agoutis. Higher seed removal by rodents in the large Cerrado remnant may decrease seed predation by beetles. (C) 2007 Elsevier Masson SAS. All rights reserved.

Rhyncophorus palmarum L. (Linnaeus, 1758): A Morphological and Histological Study of the Female Reproductive System

Rhyncophorus palmarum (Coleoptera) is a pest of great economic importance because of the damage caused in the plants of the Palmae family. This study showed that the female reproductive system of this beetle is composed of two ovaries of the telotrophic meroistic type invariably containing two ovarioles per ovary. Each ovariole is home to about 50 oocytes at different stages of maturation. The proximal region of the ovary is rather peculiar because it houses inside it a large quantity of bacilliform structures immersed in a glycolipoprotein substance, which has never before been described in the literature. The function of these structures is still unknown. However, it is suggested that they can function as a method of neutralizing the resistance of the plant because these insects are responsible for the transmission of the red ring disease to the palm plants. Microsc. Res. Tech. 74: 853-862, 2011. (C) 2010 Wiley-Liss, Inc.

Reproductive phenology of Euterpe edulis (Arecaceae) along a gradient in the Atlantic rainforest of Brazil

The palm Euterpe edulis Mart. is one of the dominant tree species in the Atlantic rainforest and considered a key resource for many frugivorous birds. We compared the reproductive phenology of E. edulis in three types of Atlantic rainforest (two lowland forests, restinga and coastal-plain, and a premontane forest) on Cardoso Island (Cananeia, São Paulo, Brazil), aiming to answer the following questions: (i) whether the reproduction of E. edulis is annual and seasonal across the years in the three forest types studied; (ii) what are the environmental factors influencing the reproductive phenology of E. edulis; and (iii) how does the timing of fruiting and fruit production of E. edulis vary among the three forest types? We evaluated the presence of flowers and fruits (immature, unripe and ripe) from August 2001 to July 2004 in 150 individuals (50 per forest), and estimated the number of infructescences with ripe fruits and the production of fruits and seeds by collecting them on the forest floor in the three forest types. Flowering and fruiting of E. edulis were annual and significantly seasonal in the three forest types, with a high synchrony of flowering and medium to low synchrony of fruiting. Flowering peaked in November and December, and immature and unripe fruits peaked in January and March, all during the rainy season. Immature and unripe fruit phases were correlated with the daylength, precipitation and temperature, important factors for fruits development. Ripe fruits peaked in April and May, in the less rainy season, with significant differences in the mean dates among forests. The number of infructescences with ripe fruits and the biomass of fruits and seeds collected on the ground also differed significantly among the forest types, being greater in the restinga and coastal plain forests, respectively. Differences in productivity were related to palm density in each area and the soil fertility. The complementary fruiting pattern of E. edulis in the forests studied may affect the distribution and abundance of certain frugivorous bird species that feed on their fruits.

Temporal variation in the abundance of two species of thrushes in relation to fruiting phenology in the Atlantic rainforest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)