961 resultados para PREDICTIVE PERFORMANCE
Resumo:
In this paper we introduce a formation control loop that maximizes the performance of the cooperative perception of a tracked target by a team of mobile robots, while maintaining the team in formation, with a dynamically adjustable geometry which is a function of the quality of the target perception by the team. In the formation control loop, the controller module is a distributed non-linear model predictive controller and the estimator module fuses local estimates of the target state, obtained by a particle filter at each robot. The two modules and their integration are described in detail, including a real-time database associated to a wireless communication protocol that facilitates the exchange of state data while reducing collisions among team members. Simulation and real robot results for indoor and outdoor teams of different robots are presented. The results highlight how our method successfully enables a team of homogeneous robots to minimize the total uncertainty of the tracked target cooperative estimate while complying with performance criteria such as keeping a pre-set distance between the teammates and the target, avoiding collisions with teammates and/or surrounding obstacles.
Resumo:
Com o acentuar da crise financeira (que se traduziu numa situação de recessão económica a nível mundial com efeitos consideráveis na economia portuguesa), cada empresa tem ainda mais em atenção a sua performance, como maximizar o seu valor, e talvez ainda mais importante nos dias que correm, como minimizar o risco de falência. Para tal, os gestores têm de ter em consideração todos os aspetos relevantes e que possam interferir com o sucesso do seu negócio. Nesse sentido, devem ter em seu poder o mais alargado leque de informação possível, para tomarem as decisões corretas tanto a curto como a médio longo prazo. A informação disponibilizada pela análise económico-financeira torna-se então um importante instrumento para a tomada de decisão embora não poderá ser apenas o único instrumento utilizado pelos decisores. Com o presente relatório de estágio pretende-se aferir da importância da análise económico-financeira na performance das empresas, tendo em consideração o estágio realizado na empresa Prime Century, Lda. Para além da já referida análise económico-financeira, iremos abordar, na sequência do trabalho desenvolvido durante o estágio, a criação de planos de negócios e a avaliação de empresas.
Resumo:
INTRODUCTION AND AIMS: Adult orthotopic liver transplantation (OLT) is associated with considerable blood product requirements. The aim of this study was to assess the ability of preoperative information to predict intraoperative red blood cell (RBC) transfusion requirements among adult liver recipients. METHODS: Preoperative variables with previously demonstrated relationships to intraoperative RBC transfusion were identified from the literature: sex, age, pathology, prothrombin time (PT), factor V, hemoglobin (Hb), and platelet count (plt). These variables were then retrospectively collected from 758 consecutive adult patients undergoing OLT from 1997 to 2007. Relationships between these variables and intraoperative blood transfusion requirements were examined by both univariate analysis and multiple linear regression analysis. RESULTS: Univariate analysis confirmed significant associations between RBC transfusion and PT, factor V, Hb, Plt, pathology, and age (P values all < .001). However, stepwise backward multivariate analysis excluded variables Plt and factor V from the multiple regression linear model. The variables included in the final predictive model were PT, Hb, age, and pathology. Patients suffering from liver carcinoma required more blood products than those suffering from other pathologies. Yet, the overall predictive power of the final model was limited (R(2) = .308; adjusted R(2) = .30). CONCLUSION: Preoperative variables have limited predictive power for intraoperative RBC transfusion requirements even when significant statistical associations exist, identifying only a small portion of the observed total transfusion variability. Preoperative PT, Hb, age, and liver pathology seem to be the most significant predictive factors but other factors like severity of liver disease, surgical technique, medical experience in liver transplantation, and other noncontrollable human variables may play important roles to determine the final transfusion requirements.
Resumo:
Burn mortality statistics may be misleading unless they account properly for the many factors that can influence outcome. Such estimates are useful for patients and others making medical and financial decisions concerning their care. This study aimed to define the clinical, microbiological and laboratorial predictors of mortality with a view to focus on better burn care. Data were collected using independent variables, which were analyzed sequentially and cumulatively, employing univariate statistics and a pooled, cross-sectional, multivariate logistic regression to establish which variables better predict the probability of mortality. Survivors and non-survivors among burn patients were compared to define the predictive factors of mortality. Mortality rate was 5.0%. Higher age, larger burn area, presence of fungi in the wound, shorter length of stay and the presence of multi-resistant bacteria in the wound significantly predicted increased mortality. The authors conclude that those patients who are most apt to die are those with age > 50 years, with limited skin donor sites and those with multi-resistant bacteria and fungi in the wound.
Resumo:
Purpose: The purpose of this article is to discuss the impact of Supplier orientation and the resulting Supply Chain Management (SCM) approach, on the organizational performance of ISO 9001 Quality Management Systems certified organizations. Methodology/Approach: Following a literature review, a full structural conceptual model was proposed. An online survey was administered to managers of Portuguese organizations with certified ISO 9001 Quality Management Systems. Descriptive Statistics and Structural Model Equations were used to validate the proposed conceptual model. Findings: There are positive relationships between Organization Strategy and Supplier Orientation, between Supplier Orientation and Stakeholders Satisfaction, and between Stakeholders Satisfaction and Organizational Performance Orientation, supporting ISO 9001:2015. These findings provide insights that supplier orientation, mediated by stakeholder satisfaction, is an essential tool for organizational competitive sustainable advantage. Research Limitation/implication: The analysis was based on managers of ISO 9001 certified organizations perceptions, so additional studies with actual data and longitudinal studies should be useful for further validation. Originality/Value of paper: The importance of the overall organizational ecosystem is highlighted with potential impact on the more than 1 Million ISO 9001 organizations certified worldwide and in their suppliers.
Resumo:
Human Immunodeficiency Vírus Type 1 and 2 antibodies detection was performed in 457 dried whole blood spots samples (S&S 903). Q-Preven HIV 1+2 was the screening test used. The results were compared with the gold standard serum tests by ELISA (Cobas Core e Axsym HIV1/2 gO) and imunofluorescence was the definitive confirmatory test. The samples were obtained from the Hospital Nossa Senhora da Conceição in Porto Alegre, RS - Brazil, through whole blood transfer to filter paper card and sent to Caxias do Sul, RS - Brazil where the tests were performed. The dried whole blood spot stability was evaluated with two different panels. The first one was composed of five negative and five positive samples stored at room temperature, 4 ºC, -20 ºC and -70 ºC, while the second was composed of two negative and three positive samples stored at 37 ºC (humidity <50%). Each sample was screened every week for six weeks. These measurement results didn't show variation during the study period. The detected sensibility was 100%, specificity was 99.6%, the positive predictive value was 99.5% and negative predictive values were 100%. The results demonstrated high performance characteristics, opening a new perspective of dried whole blood spot utilization in HIV screening diagnosis.
Resumo:
The integrity of multi-component structures is usually determined by their unions. Adhesive-bonding is often used over traditional methods because of the reduction of stress concentrations, reduced weight penalty, and easy manufacturing. Commercial adhesives range from strong and brittle (e.g., Araldite® AV138) to less strong and ductile (e.g., Araldite® 2015). A new family of polyurethane adhesives combines high strength and ductility (e.g., Sikaforce® 7888). In this work, the performance of the three above-mentioned adhesives was tested in single lap joints with varying values of overlap length (LO). The experimental work carried out is accompanied by a detailed numerical analysis by finite elements, either based on cohesive zone models (CZM) or the extended finite element method (XFEM). This procedure enabled detailing the performance of these predictive techniques applied to bonded joints. Moreover, it was possible to evaluate which family of adhesives is more suited for each joint geometry. CZM revealed to be highly accurate, except for largely ductile adhesives, although this could be circumvented with a different cohesive law. XFEM is not the most suited technique for mixed-mode damage growth, but a rough prediction was achieved.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica
Resumo:
Most energy spent in walking is due to step-to-step transitions. During this phase, the interlimb coordination assumes a crucial role to meet the demands of postural and movement control. The authors review studies that have been carried out regarding the interlimb coordination during gait, as well as the basic biomechanical and neurophysiological principles of interlimb coordination. The knowledge gathered from these studies is useful for understanding step-to-step transition during gait from a motor control perspective and for interpreting walking impairments and inefficiency related to pathologies, such as stroke. This review shows that unimpaired walking is characterized by a consistent and reciprocal interlimb influence that is supported by biomechanical models, and spinal and supraspinal mechanisms. This interlimb coordination is perturbed in subjects with stroke.
Resumo:
This article presents a novel method for visualizing the control systems behavior. The proposed scheme uses the tools of fractional calculus and computes the signals propagating within the system structure as a time/frequency-space wave. Linear and nonlinear closed-loop control systems are analyzed, for both the time and frequency responses, under the action of a reference step input signal. Several nonlinearities, namely, Coulomb friction and backlash, are also tested. The numerical experiments demonstrate the feasibility of the proposed methodology as a visualization tool and motivate its extension for other systems and classes of nonlinearities.
Resumo:
The objective of the thesis is to analyze the behaviour of the wind flow when it is passing beside the forest. To complete this analysis, a parametric study was done based upon generalized situations. Some abacus have been made, which are related to forest and wind characteristics. The abacus were compared with a particular real case, namely Alexandrovo (Bulgaria), where it was concluded that the applicability of the abacus in projects with complex terrain is low and they must be used, from a quantitative point of view, for flat terrain, being hc the most important parameter.
Resumo:
This study aims to analyze and compare micro-firms’ organizational culture related to organizational performance. A case study methodology was used based on four firms, competitors among themselves in the Information Technology business, focusing on the years between 2008-2013. Findings pointed out many similarities to larger firms, but some specificities of micro-firms were found and propositions were defined: clan culture predominance is related to best performing micro-firms; the configuration of several culture types seemed to be the most suitable for obtaining good organizational results, provided that they do not focus only on hierarchy and market types of culture; the market culture predominance perception by employees is associated with low job satisfaction; and, after a certain time in business, micro-firms, as do larger companies, seek to standardize and control processes. Recognizing that organizational culture is considered important to firms’ results, this study sheds some light on that important factor for micro-firms.
Resumo:
During the last years, several studies have been made aiming to assess the out-of-plane seismic response of unreinforced stone masonry structures. This fact led to the development of a wide variety of models and approaches, ranging from simple kinematic based analytical models up to complex numerical simulations. Nevertheless, for the sake of simplicity, the out-of-plane seismic response of a masonry wall pier may be obtained by means of a simple single-degree-of-freedom system while still providing good results. In fact, despite the assumptions associated with such a simple formulation, it is also true that the epistemic uncertainty inherent with the selection of appropriate input parameters in more complex models may render them truly ineffective. In this framework, this paper focuses on the study of the out-of-plane bending of unreinforced stone masonry walls (cantilevers) by proposing a simplified analytical approach based on the construction of a linearized four-branch model, which is used to characterize the linear and nonlinear response of such structural elements through an overturning moment-rotation relationship. The formulation of the four-branch model is presented and described in detail and the meaningful parameters used for its construction are obtained from a set of experimental laboratory tests performed on six full-scale unreinforced regular sacco stone masonry specimens. Moreover, a parametric analysis aiming to evaluate the effect of these parameters’ variation on the final configuration of the model is presented and critically discussed. Finally, the results obtained from the application of the developed four-branch model on real unreinforced regular sacco stone masonry walls are thoroughly analysed and the main conclusions obtained from its application are summarized.
Resumo:
Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.