Niche differentiation among mat-forming, sulfide-oxidizing bacteria in chemosynthetic ecosystems of the Nile Deep Sea Fan (Eastern Mediterranean Sea)

Sulfidic muds of cold seeps on the Nile Deep Sea Fan are populated by different types of mat-forming sulfide-oxidizing bacteria. The predominant sulfide oxidizers of three different mats were identified by microscopic and phylogenetic analyses as (i) Arcobacter species producing cotton-ball-like sulfur precipitates, (ii) large filamentous sulfur bacteria including Beggiatoa species, or (iii) single, spherical cells resembling Thiomargarita species. High resolution in situ microprofiles revealed different geochemical settings selecting for different mat types. Arcobacter mats occurred where oxygen and sulfide overlapped at the bottom water interface. Filamentous sulfide oxidizers were associated with non-overlapping, steep gradients of oxygen and sulfide. A dense population of Thiomargarita was favored by temporarily changing supplies of oxygen and sulfide. These results indicate that the decisive factors in selecting for different mat-forming bacteria within one deep-sea province are spatial or temporal variations in energy supply. Furthermore, the occurrence of Arcobacter spp.-related 16S rRNA genes in the sediments below all three types of mats, as well as on top of brine lakes of the Nile Deep Sea Fan, indicates that this group of sulfide oxidizers can switch between different life modes depending on the geobiochemical habitat setting.

Mineralogy and stable isotopic composition of carbonates and sulfide minerals from ODP Leg 164 sites

During Ocean Drilling Program Leg 164, gas hydrates were recovered in the Blake Ridge where the top of the gas hydrate zone lies at about 200 meters below seafloor (mbsf) and the bottom-simulating reflector (BSR) is located at about 450 mbsf. There is no sedimentological discontinuity crossing the BSR. The BSR is disrupted by the salt piercement of the Cape Fear Diapir. The authigenic carbonates (dolomite and siderite) are always present in small amounts (a few weight percent) in the sediments; they are also concentrated in millimeter- to centimeter-sized nodules and layers composed of dolomite above the top of the gas hydrate reservoir, and of siderite below the BSR. In the Blake Ridge, the dolomite/siderite boundary is located near 140 mbsf. The distribution with depth of the d18O values of dolomite and siderite shows a sharp decrease from high values (maximum 7.5 per mil) in the topmost 50 m, to very low values (minimum -2.7 per mil) at 140 mbsf, and at greater depth increase to positive values within the range of 1.8 per mil to 5.0 per mil. The d13C distribution is marked by the rapid increase with greater depth from low values (-31.3 per mil to -11.4 per mil) near 50 mbsf to positive values at 110 mbsf, which remain in the range of 1.7 to 5.4 down to 700 mbsf. Diagenetic carbonates were precipitated in pore waters in which d18O and d13C values were highly modified by strong fractionation effects, both in the water and in the CO2-CH4 systems associated with the formation and dissociation of gas hydrates.

Methane and sulfide fluxes in permanent anoxia: in situ studies at the Dvurechenskii mud volcano (Sorokin Trough, Black Sea)

The Dvurechenskii mud volcano (DMV), located in permanently anoxic waters at 2060 m depth (Sorokin Trough, Black Sea), was visited during the M72/2 cruise with the RV Meteor to investigate the methane and sulfide release from mud volcanoes into the Black Sea hydrosphere. We studied benthic fluxes of methane and sulfide, and the factors controlling transport, consumption and production of both compounds within the sediment. The pie shaped mud volcano showed temperature anomalies as well as solute and gas fluxes indicating high fluid flow at a small elevation north of the geographical center. The anaerobic oxidation of methane (AOM) coupled to sulfate reduction (SR) was excluded from this zone due to fluid-flow induced sulfate limitation and a fresh mud flow and consequently methane escaped into the water column with a rate of 0.46 mol/m**2/d. In the outer center of the mud volcano fluid flow and total methane flux were decreased, correlating with an increase in sulfate penetration into the sediment, and with higher SR and AOM rates. Here between 50-70% of the methane flux (0.07-0.1 mol/m**2/d) was consumed within the upper 10 cm of the sediment. Also at the edge of the mud volcano fluid flow and rates of methane and sulfate turnover were substantial. The overall amount of dissolved methane released from the mud volcano into the water column was significant with a discharge of 1.4x10**7 mol/yr. The DMV maintains also high areal rates of methane-fueled sulfide production of on average 0.05 mol/m**2/d. However, we concluded that sulfide and methane emission into the hydrosphere from deep water mud volcanoes does not significantly contribute to the sulfide and methane inventory of the Black Sea.

Composition of sulfide minerals of ODP Hole 209-1268A

This paper presents sulfide mineral occurrence, abundance, and composition in samples from hydrothermally altered peridotite and gabbro recovered during Ocean Drilling Program (ODP) Leg 209 from south of the 15°20'N Fracture Zone on the Mid-Atlantic Ridge at Site 1268. Most of the sulfide minerals occur in veins and halos around veins in serpentinized peridotite. The only sulfide phases reported that occur in proximity to gabbro are those associated with a mafic intrusion into serpentinized peridotite. Sulfide mineral species change predictably downsection but are perturbed coincident with a breccia interpreted to be generated by intrusion of a gabbroic magma. The general downhole trend suggests sulfide mineral precipitation in conditions with decreasing sulfur and oxygen fugacity. Sulfide minerals that indicate precipitation at relatively higher sulfur and oxygen fugacity occur in the central core of the intrusion breccia. Sphalerite makes a fleeting appearance in the sulfide mineral assemblage in samples from the lower part of the intrusion breccia. Strongly contrasting pyrite compositions suggest at least two episodes of pyrite precipitation, but there is no clear morphological distinction between phases. Heazelwoodite, tentatively identified in shipboard examinations, could not be confirmed in this study.

Concentration of hydrogen sulfide in waters of the Black Sea in the layer of its coexistence with oxygen

About 100 parallel determinations of hydrogen sulfide by the volumetric and photometric methods were made in the layer of coexistence of oxygen with hydrogen sulfide (C layer). Thiosulfates were determined simultaneously. Regardless of locations of the stations, determinations by two methods coincided for the entire range of depths of occurrence of the C layer upper boundary. Within the C layer hydrogen sulfide readings obtained by these two independent methods agreed; thiosulfates were not found by direct measurements. Difference in the readings appears at the lower boundary of the C layer and below it, accompanied by appearance of thiosulfates. It is therefore concluded that it is correct to determine the upper boundary of the C layer by the iodometric method and to use concentration of hydrogen sulfide obtained by this method in the C layer to calculate rate of chemical oxidation of hydrogen sulfide in quasistationary processes.

Chemistry of the massive sulfide deposit at DSDP Hole 63-471

We report here chemical analyses of sulfide and other minerals occurring in the massive sulfide deposit cored at Site 471. Details of the mineralogy and inferred paragenesis of the deposit will be reported elsewhere. The sulfide deposit at Site 471 occurs between overlying pelagic sediment and underlying basalt. The deposit is vertically zoned and consists, from top to bottom, of the following mineral assemblages: (1) pyrite, chalcopyrite, and Zn-sulfide in chert and calcite gangue (about 35 cm thick); (2) a 5-cm-thick metalliferous sediment layer described in detail by Leinen (this volume); and (3) a 4-cm-thick chert layer. The overlying sediment is a calcareous silty claystone that contains middle Miocene coccoliths (Bukry, this volume). The underlying basalt has been extensively chloritized and veined with calcite. In places feldspars are albitized, and calcite occurs as pseudomorphs after olivine. Relict textures suggest that the basalt grades into diabase and gabbro with increasing depth. Neither stock work nor disseminated sulfides was observed in the altered rocks.

Rates of sulfide formation and oxidation in the Black Sea waters in February-April 1991

Rate of hydrogen sulfide oxidation in the redox zone of the Black Sea and rate of hydrogen sulfide formation due to bacterial sulfate reduction in the upper layer of anaerobic waters were measured in February-April 1991. These measurements were made using sulfur radioisotope under conditions close to those in situ. It was established that hydrogen sulfide is oxidized in the layer of oxygen and hydrogen sulfide coexistence under the upper boundary of the hydrogen sulfide layer. Maximum rate of hydrogen sulfide oxidation was recorded within the limits of density values dT of 16.20-16.30, while varying in the layer from 2 to 4.5 µmol/day. The average rate of hydrogen sulfide oxidation was 1.5-3 times higher than that during the warm season. Sulfide formation was not observed at most of the stations in the examined lower portion of the pycnocline layer (140 to 400 m). Noticeable sulfate reduction was detected only at one station on the northwestern shelf. Intensified hydrodynamics in the upper layers of the water mass during the cold season can be a probable reason for such noticeable changes in sulfur dynamics in the water mass of the Black Sea. Data suggesting that hydrogen sulfide oxidation proceeds under the hydrogen sulfide boundary indicate absence of the so-called "suboxic zone" in this basin.

Chemical and mineral compositions of sulfide deposits from the Snake Pit hydrothermal field, Mid-Atlantic Ridge rift zone

The Snake Pit hydrothermal field is located on the top of a neovolcanic rise on the Mid-Atlantic Ridge at sea depths between 3460 and 3510 m. It was surveyed during several oceanological expeditions including DSDP Legs. Additional scientific materials were obtained in 2002 and 2003 during expedition onboard R/V Akademik Mstislav Keldysh with two Mir deep-sea manned submersibles. Three eastern hydrothermal mounds (Moose, Beehive, and Fir Tree) are located on the upper part of the eastern slope of the rise over a common fractured pedestal composed of fragments of massive sulfides. The western group of hydrothermal deposits is encountered on the western slope of the axial graben. Within this mature hydrothermal field, which was formed over the past 4000 years, we studied morphology of the hydrothermal mounds, chemistry and mineralogy of hydrothermal deposits, chemistry of sulfide minerals, and isotope composition of sulfur in them.