Efeito da concentração de enzima e de substrato no grau de hidrólise e nas propriedades funcionais de hidrolisados proteicos de corvina (Micropogonias furnieri)

The objective of this work was to obtain hydrolysates with different degrees of hydrolysis using Alcalase 2.4L® and to evaluate the effect of the enzyme [E] and substrate [S] concentration on the functional properties of the hydrolysates. It was obtained hydrolysates with hydrolysis degree values ranging from 12.2 to 43.7%. The values of solubility and water holding capacity were similar for the greater number of the hydrolysates with minimum values in the pH 5.0. The hydrolysis degree showed direct relationship with the solubility and indirect with the water holding capacity, oil holding capacity, emulsifying capacity and foaming capacity.

Efeitos da história térmica nas propriedades do polímero pet: um experimento para ensino de análise térmica

Polyethilenetherephtalate (PET) is commonly used in manufacturing of beverage bottles representing a didactic appeal in thermal analysis education due to its presence in the student's day life. Additionally such polymer presents well defined thermal analytical curves and a well known thermal behavior. TGA curve is used to present the thermal stability. The thermal history effects in the thermal properties of a PET sample from a soft drink bottle are used to demonstrate the effect of different heating/cooling conditions on glass transition, melting, crystallization and crystalline degree using DSC curves.

Influência do pH nas propriedades físico-químicas, térmicas e mecânicas de filmes de poli(vinil álcool)/poli(ácido acrílico)/aciclovir

Drug-loaded films represent an alternative method for the treatment of skin lesions caused by Herpes simplex, since they facilitate delivery of the drug directly at the site of lesion. The objective of this work was to prepare PVA/PAA films containing AC at pH 2.0 and 4.0. The results show that the pH of the film preparations influences the polymer¾drug interaction kinetic order and the degree of swelling. The mechanism of release of AC from the films obtained at pH 4.0 was anomalous, whereas for the films prepared at pH 2.0 the release followed zero-order kinetics.

INFLUÊNCIA DO CONTEÚDO DE XILANAS NA BRANQUEABILIDADE, PROPRIEDADES HIGROSCÓPICAS, FISICO-MECÂNICAS E ÓPTICA DE POLPAS BRANQUEADAS DE EUCALIPTO

Bleached eucalypt kraft pulps are widely used in print and writing (P&W) and tissue paper manufacture. Among the quality requirements of pulp for these papers, xylan content has been controversial. The objective of this study was to evaluate the influence of xylan content on bleachability, hygroscopic, physic-mechanical and optical properties of the pulp. In this study industrial unbleached eucalyptus kraft pulp (15.6% xylans) treated with different NaOH loads to change its xylan content was used. Subsequently, pulps were bleached by the ODHT(EP)D sequence to achieve 90% ISO of brightness, then refined and submitted to hygroscopic, physicomechanical and optical tests. NaOH treatments decreased the xylan content to 14.5-5.9% using NaOH loads of 10-70 g L-1. Pulp bleachability was not significantly affected by xylan content decrease. The decrease in xylan content negatively affected the water retention value and Klemm capillarity of the pulp, while water absorption capacity was positively affected. Tensile and tear index were negatively influenced by the reduction in xylan content, whereas bulk and light scattering coefficient increased.

Avaliação de propriedades físicas e mecânicas da madeira de cinco espécies florestais em função da deterioração em dois ambientes

Este trabalho teve por objetivo avaliar algumas propriedades físicas e mecânicas da madeira de Eucalyptus urophylla S.T. Blake "Eucalipto" (Myrtaceae), Melia azedarach L. "Cinamomo" (Meliaceae), Lophantera lactescens Ducke, "lanterneira" (Malpighiaceae), Pinus elliottii Engelm. "Pinus" (Pinaceae) e Inga marginata Wild "Inga" (Mimosaceae), submetidas ao processo de degradação em razão da exposição à intempérie no período de 12 meses, as madeiras foram colocadas em dois ambientes com características edafoclimáticas diferenciadas, isto é, foram montados dois campos de apodrecimento, sendo um dentro de uma mata secundária e outro a céu aberto, em um pasto formado por gramíneas rasteiras. Na avaliação, adotou-se um índice de deterioração médio, para expressar a degradação causada pelos fatores bióticos, nos corpos-de-prova oriundos de toras expostas nos respectivos ambientes. As determinações da densidade aparente, bem como da resistência à flexão (módulo de elasticidade (MOE) e ruptura (MOR)) e compressão paralela às fibras da madeira, foram realizadas antes e depois da exposição à intempérie. Os resultados indicaram que ocorreram reduções diferenciadas nas propriedades avaliadas. As diminuições significativas da densidade ocorreram somente nos corpos-de-prova oriundos das madeiras expostas dentro da mata, bem como as reduções nos módulos de elasticidade e ruptura foram mais acentuadas nas madeiras procedentes desse ambiente. A resistência à compressão da madeira apresentou-se com reduções maiores, também nesse ambiente.

ESTUDO DA RELAÇÃO ENTRE CONDIÇÕES DE POLPAÇÃO E PROPRIEDADES FÍSICO-MECÂNICAS DO PAPEL

RESUMOO objetivo deste estudo foi avaliar a influência da condição de polpação nas propriedades físico-mecânicas do papel branqueado de eucalipto. Para este estudo, foram utilizados cavacos de um híbrido clonal de eucalipto (Eucalyptus grandis x Eucalyptus urophylla) de 7 anos de idade. As polpas foram produzidas por duas condições distintas de polpação Lo-SolidsTM, sendo elas: Condição PI – álcali efetivo de 16,5%, sulfidez de 30% e temperatura de cozimento de 155 ºC; e Condição PII – álcali efetivo de 17,5%, sulfidez de 32% e temperatura de cozimento de 147 ºC. Ambos os cozimentos foram realizados buscando-se número kappa de 18,0 ± 0,5. Os branqueamentos foram realizados pela sequência de branqueamento OA(Ze)DP, buscando-se a alvura de 90,0 ± 1,0% ISO. Os refinos foram realizados a 0, 750, 1.500 e 3.000 níveis de revoluções e as correlações, feitas utilizando o índice de tração como variável independente da curva de refino. As propriedades físico-mecânicas do papel foram influenciadas pela condição de polpação, com aumento da drenabilidade, densidade aparente, índice TEA, alongamento e índice de rasgo para a polpa PI, considerando-se um mesmo índice de tração. A polpa PII, entretanto, atingiu o mesmo índice de tração da polpa PI com menor nível de refino e, consequentemente, menor gasto de energia. A condição de polpação PII foi mais adequada para a produção de papel por preservar mais a integridade das fibras, alcançando um mesmo índice de tração com um menor nível de refino.

AVALIAÇÃO DE PROPRIEDADES FÍSICAS E MECÂNICAS DE MADEIRAS DE JATOBÁ (Hymenaea stilbocarpa Hayne) COM DIFERENTES TEORES DE UMIDADE E EXTRAÍDAS DE REGIÕES DISTINTAS1

RESUMO Este trabalho objetivou investigar a influência das regiões de extração (Municípios de Caracaraí e Bonfim, Sul de Roraima; Município de Alta Floresta, Norte de Mato Grosso) da madeira da espécie jatobá (Hymenaea stilbocarpa). Também, foi avaliada a influência do teor de umidade (madeira saturada e a 12%) em 15 propriedades físicas e mecânicas de interesse. Ao todo, foram preparados e ensaiados, segundo as prescrições da Norma Brasileira ABNT NR 7190 (1997), 840 corpos de prova. Os resultados da análise de variância (a 5% de significância) revelaram que a região de extração dos corpos de prova não foi significativa nas propriedades físicas e mecânicas avaliadas, pois foram obtidos valores equivalentes, independentemente da origem, aspecto altamente interessante à medida que nem sempre é possível identificar a região de onde provém a madeira tropical. Essa importância é ainda maior no caso do emprego da madeira como elemento, cujos valores de referência se encontram apontados nos anexos do referido documento normativo. Com relação ao teor de umidade, foi observada diferença significativa em oito das 15 propriedades avaliadas. A condição de 12% de teor de umidade apresentou valores médios superiores à condição saturada nas propriedades de resistência na compressão paralela (37%), resistência na tração paralela (29%) e cisalhamento (36%) na direção paralela às fibras; módulo de resistência na flexão (26%), módulo de elasticidade na compressão paralela (9%) e 200 direções paralelas (35%) e normal (28%) às fibras; e inferior na densidade aparente.

Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples

Efeito da adição de grafite expandido por microondas nas propriedades térmicas, elétricas e mecânicas de nanocompósitos de matriz epóxi

Epoxy based nanocomposites with 1 wt % and 3 wt % of nanographite were processed by high shear mixing. The nanographite was obtained by chemical (acid intercalation), thermal (microwave expansion) and mechanical (ultrasonic exfoliation) treatments. The mechanical, electrical and thermal behavior of the nanocomposites was determined and evaluated as a function of the percentage of reinforcement. According to the experimental results, the electrical conductivity of epoxy was not altered by the addition of nanographite in the contents evaluated. However, based on the mechanical tests, nanocomposites with addition of 1 wt.% and 3 wt.% of nanographite showed increase in tensile strength of 16,62 % and 3,20 %, respectively, compared to the neat polymer. The smaller increase in mechanical strength of the nanocomposite with 3 wt.% of nanographite was related to the formation of agglomerates. The addition of 1 wt.% and 3 wt.% of nanographite also resulted in a decrease of 6,25 % and 17,60 %, respectively, in the relative density of the material. Thus, the specific strength of the nanocomposites was approximately 33,33 % greater when compared to the neat polymer. The addition of 1 wt.% and 3 wt.% of nanographite in the material increased the mean values of thermal conductivity in 28,33 % and 132,62 %, respectively, combined with a reduction of 26,11 % and 49,80 % in volumetric thermal capacity, respectively. In summary, it has been determined that an addition of nanographite of the order of 1 wt.% and 3 wt.% produced notable elevations in specific strength and thermal conductivity of epoxy

Estudo de Matérias-Primas do Rio Grande do Norte para Uso em Revestimento Poroso: Influência do teor de dolomita e temperatura de calcinação nas propriedades físico-mecânicas

The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural gás. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940ºC, 1000ºC, 1060ºC, 1120ºC and 1180ºC, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940ºC, 1000ºC and 1060ºC, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120ºC next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII)

Propriedades físicas e mecânicas de painéis LVL de Eucalyptus grandis

This paper mainly aimed to evaluate the physical and mechanical properties of LVL panels made from Eucalyptus grandis, from reforestation at the region of Senges, in Parana state, Brazil. LVL panels were manufactured using 23 veneers (2,4mm thick each one) in commercial dimension of 2.500 mm long and 1,200 mm wide. The properties of static bending were analyzed (strength and rigidity) in beams of the LVL, in the flatwise and edgewise positions. The properties of compression parallel to grain and shear parallel in the plans L-X and L-Y and density in this LVL panels were also analyzed according to ASTM-D 5456/4761 and ASTM-D 198 codes. The mean values to flatwise bending MOE and MOR were 13114 MPa and 88.76 MPa, respectively, and for edgewise bending MOE and MOR were 15871 MPa and 88.63 MPa, respectively. The density (12%) of the LVL panels and of the veneers were 690 kg/m(3) and 649 kg/m(3). The mean values to parallel compression MOE and MOR were 16856 MPa and 58.05 MPa, respectively. The mean values of the maximum resistance to shear parallel in the plans L-X and L-Y were 5.96 MPa and 591 MPa, respectively. All these values reached partially or they passed the medium limits of reference (normative codes, researches and commercial catalogs) established for LVL panels and original solid wood, attesting overall the quality of those panels produced with this wood.

Análise das propriedades termofísicas, mecânicas e geométricas de telhas cerâmicas queimadas em forno caieira e forno abóbada

In the industry of ceramic in Rio G. do Norte, tile stands out as the most manufactured product by this industry, being the intermittent kiln abóbada and caieira the principal type of kiln used in burning. There was a need to make a study of the influence exerted by the type of kiln in which tiles are burnt in their thermo physical properties. The analysis started with 24 raw samples of tile, which was split in two groups of 12 samples and burnt in Abóbada and Caieira kiln. Besides that, it was made study of the tax of heat transfer to the environment (for each kiln). After having been burnt the samples were taken for laboratory analysis. The properties verified were impermeability, determination of dry mass, absorption of water, the load of bending rupture and its geometric characteristics, the tests were conducted following the currents standards. The tests were carried out according to the ABNT - NBR 15310. The calculation of the rate of heat transfer showed that the abóbada kiln is more efficient than the Caieira, however the results of tests on the samples revealed no superiority of one over another sample. So the furnace had no influence on the performance of the ceramic tiles

Efeitos da história térmica nas propriedades do polímero pet: um experimento para ensino de análise térmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Novas formulações de fluidos de corte: otimização, propriedades e recuperação do óleo usado

Cutting fluids are lubricants used in metal-mechanical industries. Their complex composition varies according to the type of operation carried out, also depending on the metals under treatment or investigation. Due to the high amount of mineral oil produced in Northeastern Brazil, we have detected the need to better use this class of material. In this work, two novel formulations have been tested, both based on naphthenic mineral oil and additives, such as: an emulsifying agent (A), an anticorrosion agent (B), a biocide (C) and an antifoam agent (D). Each formulation was prepared by mixing the additives in the mineral oil at a 700-rpm stirring velocity for 10 min, at 25°C, employing a 24 factorial planning. The formulations were characterized by means of density, total acid number (TAN), viscosity, flash point and anticorrosion activity. In a subsequent study, oil-in-water emulsions were prepared from these novel formulations. The emulsions were analyzed in terms of stability, corrosion degree, percentage of foam formation, conductivity, accelerated stability and particle size. The samples were appropriately labeled, and, in special, two of them were selected for featuring emulsion properties which were closer to those of the standards chosen as references (commercial cutting oils). Investigations were undertaken on the ability of NaCl and CaCl2 to destabilize the emulsions, at concentrations of 2%, 5% and 10%, at an 800-rpm stirring velocity for 5 min and temperatures of 25º, 40º, 50º and 60ºC. The recovered oils were chemically altered by reincorporating the same additives used in the original formulations, followed by preparation of emulsions with the same concentrations as those of the initial ones. The purpose was to assess the possibility of reusing the recovered oil. The effluents generated during the emulsion destabilization step were characterized via turbidity index, contents of oil and grease, pH, and contents of anions and cations, observing compliance with the parameters established by the current environmental legislation (Brazil s CONAMA 357/05 resolution). It could be concluded that the formulations presented excellent physicochemical properties as compared to commercial cutting fluids, showing that the quality of the newly-prepared fluids is superior to that of the formulations available in the market, enabling technically and environmentally-safe applications

O tráfego de máquinas agrícolas e as propriedades físicas, hídricas e mecânicas de um Latossolo dos Cerrados

No Brasil, o tráfego contínuo e inadequado de rodados de máquinas e a ação da soleira dos implementos sobre áreas agrícolas na região dos Cerrados têm provocado alterações dos atributos físicos e mecânicos dos solos. Com este entendimento, este estudo teve por objetivo avaliar a influência do rodado traseiro e da soleira de implementos agrícolas, usualmente utilizados na região dos Cerrados, sobre a compressibilidade de um Latossolo Vermelho distrófico típico. Os ensaios foram realizados em parcelas preparadas com arado de discos, arado de aivecas, grade aradora e semeadora/adubadora, que, desde novembro de 1994 até à data da amostragem, novembro de 1999, estiveram sob o sistema plantio direto. As alterações na compressibilidade foram avaliadas pela quantificação das pressões de preconsolidação, assim como por algumas propriedades físicas e hídricas (densidade do solo, porosidade e condutividade hidráulica do solo saturado) no momento do preparo e depois da colheita. No momento do preparo, logo depois da passada do rodado e antes que o implemento mobilizasse o solo, o solo foi avaliado em superfície (SP - 0,00 a 0,05 m) e na profundidade média de trabalho (PMT - 0,24 a 0,27 m). A influência da soleira dos implementos foi avaliada logo depois do corte, na profundidade de trabalho abaixo da soleira de cada implemento (PT-SI). Depois da colheita, as amostragens foram repetidas, o que permitiu verificar a influência dos tráfegos subseqüentes. A intensidade de tráfego do rodado e a ação da soleira dos implementos alteraram a compressibilidade, a densidade do solo, a porosidade e condutividade hidráulica do solo saturado do Latossolo Vermelho distrófico nas profundidades: superficial (SP), profundidade média de trabalho (PMT) e profundidade de corte dos implementos (PT-SI). de maneira geral, a passada do rodado traseiro aumentou os valores de pressão de preconsolidação (sigmap) do solo na superfície (SP), enquanto o tráfego subseqüente, necessário ao cultivo, elevou esses valores em subsuperfície, tanto na PMP como em PT-SI. A passada do rodado elevou e reduziu a densidade do solo (Ds) e a macroporosidade, respectivamente, tendo sido o arado de aivecas o implemento que mais modificou essas propriedades. As soleiras dos órgãos ativos do arado de discos e da grade aradora foram as que mais elevaram a pressão de preconsolidação (sigmap), consolidando, portanto, a estrutura do solo na profundidade PT-SI. Com exceção da semeadora/adubadora, a soleira dos órgãos ativos dos demais implementos avaliados reduziram significativamente a condutividade hidráulica do solo saturado (Ks) na profundidade PT-SI, tendo o arado de aivecas se mostrado o implemento mais impactante, seguido da grade aradora e arado de discos.