Retrospective study of 145 supernumerary teeth

Objective: The goal of the present retrospective study is to describe the distribution of the supernumerary teeth in a population of patients that have been attended at the Public Clinic of the Department of Oral Surgery. Background: Supernumerary teeth and multiple hyperdontia are usually associated with different syndromes, such as Gardner syndrome, or with facial fissures; however, they can appear in patients without any pathology. Their prevalence oscillates to 0.5-3.8% in patients with permanent teeth and to 0.35-0.6% in patients with primary teeth. Patients and Methods: A total of 36,057 clinical histories of patients that were admitted at the clinic between September of 1991 and March of 2003 were revised. The following data were extrapolated: age, sex, number of extracted supernumerary teeth, localization, morphology and type of supernumerary teeth. Consequently, 102 patients were included into the present study. Results: Of the 147 supernumerary teeth identified in the oral cavities of patients 145 were extracted. The most frequent supernumerary teeth identified were mesiodens (46.9%), followed by premolars (24.1%) and fourth molars or distal molars (18%). As for location, 74.5% of the supernumerary teeth were found in the superior maxillary bone and 46.9% of the supernumerary teeth were present in the palatine/lingual area. Heteromorphology was found in two thirds of the supernumerary teeth, with conical shape being the most frequent. Finally, 29.7% of the supernumerary teeth had occlusion with permanent teeth, and mesiodens were the predominating type of supernumerary teeth that showed this feature. Conclusions: Mesiodens very frequently cause retention of permanent incisors, which erupt spontaneously after the extraction of supernumerary teeth, if there is sufficient space in the dental arch and if they conserve the eruptive force. Generally, supernumerary premolars are eumorphic and are casually discovered during radiological exam, if not producing any symptomology.

Exéresis de las lesiones hiperplásicas de la cavidad bucal. Estudio retrospectivo de 128 casos

Objetivos: Este trabajo pretende, en base a nuestra experiencia, valorar y discutir las indicaciones, ventajas e inconvenientes de la exéresis de los épulis de la cavidad bucal con el láser de dióxido de carbono (CO2) respecto al láser de Erbio:YAG (Er:YAG), el láser de diodo y el bisturí frío. Material y método: Se ha realizado un estudio retrospectivo de un grupo de 120 pacientes en los que se extirparon 128 épulis con el láser de CO2, láser de Er:YAG, láser de diodo y bisturí frío. Se realizaron controles postoperatorios a los 7, 15 y 30 días para comprobar la cicatrización y la evolución de la herida y a los 3, 6 y 12 meses verificando si se había producido o no la recidiva de la lesión. Resultados: Según las características clínicas y etiopatogénicas de las lesiones extirpadas, se han formado dos grupos: las lesiones hiperplásicas gingivales (77 casos) y los épulis fisurados (51 casos). La localización más frecuente de las hiperplasias gingivales fue la mandíbula (51.9%). Se encontró que la hiperplasia fibrosa fue el diagnóstico histopatológico más frecuente con 49 casos (63.6%). El porcentaje de recidiva tras su extirpación fue del 9,1%, de los cuales 5 casos eran hiperplasias fibrosas. Sólo hubo un caso de lesión maligna que fue diagnosticada de carcinoma de células escamosas infiltrante. Por otro lado, de los 51 épulis fisurados tratados, el 58.8% se encontraban en el maxilar superior. Éstos fueron diagnosticados histológicamente como hiperplasias fibrosas, recidivando en el 19.6% de los casos. Conclusiones: Aunque las diferentes técnicas quirúrgicas utilizadas en la extirpación del épulis de la cavidad bucal son correctas, en nuestra opinión, el láser de CO2 es el tratamiento de elección, ya que ofrece ventajas tanto intra como postoperatorias. Por otro lado, es indispensable analizar histopatológicamente toda lesión de la cavidad bucal para establecer un diagnóstico de certeza

Cirugía Bucal Ambulatoria en pacientes pediátricos. Casuística del año 2000 en la Clínica Odontológica de la Universidad de Barcelona

Objetivos: Este trabajo pretende demostrar que se pueden realizar la mayoría de las intervenciones quirúrgicas de la cavidad bucal en la población pediátrica en un medio ambulatorio, así como valorar y mostrar la actividad realizada en el Máster de Cirugía e Implantología Bucal de la Facultad de Odontología de la Universidad de Barcelona durante el año 2000. Diseño del estudio: Para la realización de este trabajo se ha contabilizado la actividad quirúrgica de las unidades de cirugía bucal y cirugía con láser en la población pediátrica en el Máster de Cirugía e Implantología Bucal de la Universidad de Barcelona. Resultados: De las 3187 intervenciones quirúrgicas realizadas en nuestro servicio, 489 fueron en pacientes menores de 18 años. La exodoncia quirúrgica de terceros molares inferiores fue la más frecuente (55'6%), seguida de otras extracciones dentarias (33'6%), quirúrgicas o no, y del resto de intervenciones (10'6%) que incluyeron: fenestraciones de caninos u otros dientes incluidos, exéresis de frenillos, de mucoceles y reubicaciones dentarias. Se presentaron complicaciones tras la extracción quirúrgica de los terceros molares en un 15'93% de los casos, siendo las más frecuentes el dolor (4'35%) y la tumefacción (4'35%), signos propios de la inflamación postoperatoria. Conclusiones: Nuestra experiencia muestra que la cirugía bucal ambulatoria puede practicarse de forma segura en la población pediátrica siempre y cuando se disponga de los medios y del personal sanitario adecuados

Ergonomics and musculoskeletal pain among postgraduate students and faculty members of the School of Dentistry of the University of Barcelona (Spain). A cross-sectional study

Objectives: To evaluate the intensity and location of musculoskeletal pain suffered by students and professors from different postgraduate programs of the School of Dentistry of the University of Barcelona (Spain), to identify the variables related to the occurrence of musculoskeletal symptoms and signs, and to establish possible preventive measures for such disorders. Materials and Methods: A cross-sectional study was made among students and faculty members from different postgraduate courses of the School of Dentistry at the University of Barcelona between May and June 2007. A total of 74 dentists (54 postgraduate students and 20 faculty members) completed an anonymous questionnaire containing 19 questions. The variables were divided into three main groups: sociodemographic information, ergonomic features and musculoskeletal pain arising from professional practice. Results: Most of the dentists (79.8%) had experienced some kind of musculoskeletal pain in the last 6 months. On comparing the different locations of pain (lumbar, cervical, dorsal, wrist, shoulder and others), the neck was found to be the most commonly affected location (58% of all subjects), and only 34% of the respondents took some preventive measures against musculoskeletal disorders. Women showed a higher frequency of intense pain involving the cervical, lumbar, dorsal and wrist areas (p<0.05). A higher incidence of wrist pain was recorded in professionals exclusively dedicated to oral surgery (p<0.05). No statistically significant correlation was found between the workload (hours) and pain in the different anatomical locations (p>0.05). Conclusions: An important incidence of pain symptoms secondary to musculoskeletal disorders was observed, particularly in the cervical region. Females and younger dentists showed a higher frequency of such symptoms. The implementation of preventive measures is necessary, in view of the high incidence of these disorders

Use of Bichat"s buccal fat pad for the sealing of orosinusal communications. A presentation of 8 cases

Objectives: To determine the efficacy of the pediculate flap with the buccal fat pad in the sealing of orosinusal communications, describe the surgical technique used, and report the main complications. Patients and method: A retrospective study was made of 8 patients seen in the Service of Oral Surgery of the University of Barcelona Dental Clinic (Spain) for the treatment of orosinusal communications between the years 2007 and 2009. In all cases a pediculate flap with the buccal fat pad was used to solve the problem. Results: All of the orosinusal communications were successfully resolved with this technique. The immediate postoperative complications were pain (37.5%), inflammation (37.5%), edema (32.5%), trismus (37.5%), halitosis (14.3%), suppuration (12.5%) and rhinorrhea (12.5%). Conclusions: The use of Bichat"s buccal fat pad is not regarded as the technique of choice for sealing small to medium sized orosinusal communications. However, in the case of large communications, it is a good option, and the results obtained are optimum.

Retrospective clinicopathological study of 418 odontogenic cysts

Objectives: To determine the relative incidence of odontogenic cysts and to identify the main clinicopathological features among patients treated in the Oral Surgery Department of the Dental Clinic of the University of Barcelona (Spain). Study design: A retrospective observational study was made of 418 odontogenic cysts diagnosed in 380 patients included in the database of 1235 histopathological diagnoses. The subjects were treated in the Master degree program of Oral Surgery and Implantology of the University of Barcelona in the period 1997-2006. The following variables were recorded: gender, age, clinical characteristics of the lesions (size and location), radiological features, duration, treatment, complications and relapses. A descriptive analysis was made of the study variables, using the SPSS version 15.0. Results: The incidence of odontogenic cysts was 33.8%. The mean patient age at appearance of the lesion was 42 years (range 7-83). The cysts were slightly more prevalent in males (58.4%). The lesion size ranged from 2-60 mm, with a mean size of 18.4 mm. The most frequent diagnosis was radicular cyst (50.2%). The most common location of the odontogenic cysts was in the mandible (61.5%), particularly the lower third molar region (36.8%). Conclusions: The most frequently diagnosed lesion was the radicular cyst. Odontogenic cysts were seen to be slightly more prevalent in males, and showed a high mandibular incidence. Knowledge of the biological and histological behavior of odontogenic cysts and their frequency are key aspects for ensuring early detection and adequate treatment.

Lateral periodontal cysts: a retrospective study of 11 cases

Objective: To describe the clinical, radiological and histopathological features of lateral periodontal cysts among patients diagnosed in different centers (Vall d"Hebron General Hospital, Granollers General Hospital, the Teknon Medical Center, and the Master of Oral Surgery and Implantology of the University of Barcelona Dental School; Barcelona, Spain). Study design: A retrospective observational study was made of 11 lateral periodontal cysts, all of which were diagnosed following a thorough clinical examination, radiological study and posterior histological study. Results: The mean patient age was 37 years, and males predominated over females. The mean lesion size was 1.25 cm. A single relapse was recorded 7 years after removal of the initial lesion. All the cysts were surgically removed. Discussion and conclusions: Lateral periodontal cysts are very infrequent, and are characterized by the preserved vitality of the adjacent teeth. Identification of the lesion is initially based on the clinical findings, though histological study is required to confirm the diagnosis. The treatment of choice is the surgical removal, though occasional relapses have been documented

Use of checkerboard DNA-DNA hybridization to evaluate the internal contamination of dental implants and comparison of bacterial leakage with cast or pre-machined abutments

To evaluate the checkerboard DNA-DNA hybridization method for detection and quantitation of bacteria from the internal parts of dental implants and to compare bacterial leakage from implants connected either to cast or to pre-machined abutments. Nine plastic abutments cast in a Ni-Cr alloy and nine pre-machined Co-Cr alloy abutments with plastic sleeves cast in Ni-Cr were connected to Branemark-compatible implants. A group of nine implants was used as control. The implants were inoculated with 3 mu l of a solution containing 10(8) cells/ml of Streptococcus sobrinus. Bacterial samples were immediately collected from the control implants while assemblies were completely immersed in 5 ml of sterile Tripty Soy Broth (TSB) medium. After 14 days of anaerobic incubation, occurrence of leakage at the implant-abutment interface was evaluated by assessing contamination of the TSB medium. Internal contamination of the implants was evaluated with the checkerboard DNA-DNA hybridization method. DNA-DNA hybridization was sensitive enough to detect and quantify the microorganism from the internal parts of the implants. No differences in leakage and in internal contamination were found between cast and pre-machined abutments. Bacterial scores in the control group were significantly higher than in the other groups (P < 0.05). Bacterial leakage through the implant-abutment interface does not significantly differ when cast or pre-machined abutments are used. The checkerboard DNA-DNA hybridization technique is suitable for the evaluation of the internal contamination of dental implants although further studies are necessary to validate the use of computational methods for the improvement of the test accuracy. To cite this article:do Nascimento C, Barbosa RES, Issa JPM, Watanabe E, Ito IY, Albuquerque Junior RF. Use of checkerboard DNA-DNA hybridization to evaluate the internal contamination of dental implants and comparison of bacterial leakage with cast or pre-machined abutments.Clin. Oral Impl. Res. 20, 2009; 571-577.doi: 10.1111/j.1600-0501.2008.01663.x.

Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study

Internal tapered connections were developed to improve biomechanical properties and to reduce mechanical problems found in other implant connection systems. The purpose of this study was to evaluate the effects of mechanical loading and repeated insertion/removal cycles on the torque loss of abutments with internal tapered connections. Sixty-eight conical implants and 68 abutments of two types were used. They were divided into four groups: groups 1 and 3 received solid abutments, and groups 2 and 4 received two-piece abutments. In groups 1 and 2, abutments were simply installed and uninstalled; torque-in and torque-out values were measured. In groups 3 and 4, abutments were installed, mechanically loaded and uninstalled; torque-in and torque-out values were measured. Under mechanical loading, two-piece abutments were frictionally locked into the implant; thus, data of group 4 were catalogued under two subgroups (4a: torque-out value necessary to loosen the fixation screw; 4b: torque-out value necessary to remove the abutment from the implant). Ten insertion/removal cycles were performed for every implant/abutment assembly. Data were analyzed with a mixed linear model (P <= 0.05). Torque loss was higher in groups 4a and 2 (over 30% loss), followed by group 1 (10.5% loss), group 3 (5.4% loss) and group 4b (39% torque gain). All the results were significantly different. As the number of insertion/removal cycles increased, removal torques tended to be lower. It was concluded that mechanical loading increased removal torque of loaded abutments in comparison with unloaded abutments, and removal torque values tended to decrease as the number of insertion/removal cycles increased. To cite this article:Ricciardi Coppede A, de Mattos MdaGC, Rodrigues RCS, Ribeiro RF. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study.Clin. Oral Impl. Res. 20, 2009; 624-632.doi: 10.1111/j.1600-0501.2008.01690.x.

Fracture Resistance of the Implant-Abutment Connection in Implants with Internal Hex and Internal Conical Connections Under Oblique Compressive Loading: An In Vitro Study

The objective of this study was to verify if differences in the design of internal hex (IH) and internal conical (IC) connection implant systems influence fracture resistance under oblique compressive forces. Twenty implant-abutment assemblies were utilized: 10 with IH connections and 10 with IC connections. Maximum deformation force for IC implants (90.58 +/- 6.72 kgf) was statistically higher than that for IH implants (83.73 +/- 4.94 kgf) (P = .0182). Fracture force for the IH implants was 79.86 +/- 4.77 kgf. None of the IC implants fractured. The friction-locking mechanics and the solid design of the IC abutments provided greater resistance to deformation and fracture under oblique compressive loading when compared to the IH abutments. Int J Prosthodont 2009;22:283-286.

Maxillary complete denture movement during chewing in mandibular removable partial denture wearers

To evaluate the pattern of maxillary complete denture movement during chewing for free-end removable partial dentures (RPD) wearers, compared to maxillary and mandibular complete denture wearers. Eighteen edentulous participants (group I) and 10 volunteers with bilateral posterior edentulous mandibles (group II) comprised the sample. Measures of mean denture movement and its variability were obtained by a kinesiographic instrument K6-I Diagnostic System, during the mastication of bread and a polysulphide block. Data were analysed using two-way anova (alpha = 0.05). Upper movement during chewing was significantly lower for group II, regardless of the test food. The test food did not influence the vertical or lateral position of the denture bases, but more anterior dislocation was found when polysulphide blocks were chewed. Group II presented lower intra-individual variability for the vertical axis. Vertical displacement was also more precise with bread as a test food. It can be concluded that mandibular free-end RPD wearers show smaller and more precise movements than mandibular complete denture wearers.

Bone Remodeling Adjacent to Morse Cone-Connection Implants with Platform Switch: A Fluorescence Study in the Dog Mandible

Purpose: The aim of this study was to evaluate, through fluorescence analysis, the effect that different interimplant distances, after prosthetic restoration, will have on bone remodeling in submerged and nonsubmerged implants restored with a ""platform switch."" Materials and Methods: Fifty-six Ankylos implants were placed 1.5 mm subcrestally in seven dogs. The implants were placed so that two fixed prostheses, with three interimplant contacts separated by 1-mm, 2-mm, and 3-mm distances, could be fabricated for each side of the mandible. The sides and the positions of the groups were selected randomly. To better evaluate bone remodeling, calcein green was injected 3 days before placement of the prostheses at 12 weeks postimplantation. At 3 days before sacrifice (8 weeks postloading), alizarin red was injected. The amounts of remodeled bone within the different interimplant areas were compared statistically before and after loading in submerged and nonsubmerged implants. Results: Statistically significant differences existed in the percentage of remodeled bone seen in the different regions. Mean percentages of remodeled bone in the submerged and nonsubmerged groups, respectively, were as follows: for the 1-mm distance, 23.0% +/- 0.05% and 23.1% +/- 0.03% preloading and 27.0% +/- 0.03% and 25.2% +/- 0.04% postloading, for the 2-mm distance, 18.2% +/- 0.05% and 18.1% +/- 0.04% preloading and 21.3% +/- 0.07% and 19.9% +/- 0.03% postloading, for the 3-mm distance, 18.3% +/- 0.03% and 18.3% +/- 0.03% preloading and 18.8% +/- 0.04% and 19.8% +/- 0.04% postloading, for distal-extension regions, 16.6% +/- 0.02% and 17.4% +/- 0.04% preloading and 17.0% +/- 0.04% and 18.4% +/- 0.04% postloading. Conclusions: Based upon this animal study, loading increases bone formation for submerged or nonsubmerged implants, and the interimplant distance of 1 mm appears to result in more pronounced bone remodeling than the 2-mm or 3-mm distances in implants with a ""platform switch."" INT J ORAL MAXILLOFAC IMPLANTS 2009;24:257-266

Antimicrobial Photodynamic Therapy in the Non-Surgical Treatment of Aggressive Periodontitis: Cytokine Profile in Gingival Crevicular Fluid, Preliminary Results

Background: Aggressive periodontitis is a specific form of periodontal disease that is characterized by rapid attachment loss and bone destruction. Cytokine profiles are of considerable value when studying disease course during treatment. The aim of this trial was to investigate cytokine levels in the gingival crevicular fluid (GCF) of patients with aggressive periodontitis, after treatment with photodynamic therapy (PDT) or scaling and root planing (SRP), in a split-mouth design on -7, 0, +1, +7, +30, and +90 days. Methods: Ten patients were randomly treated with PDT using a laser source associated with a photosensitizer or SRP with hand instruments. GCF samples were collected, and the concentrations of tumor necrosis factor-alpha (TNF-alpha) and receptor activator of nuclear factor-kappa B ligand (RANKL) were determined by enzyme-linked immunosorbent assays. The data were analyzed using generalized estimating equations to test the associations among treatments, evaluated parameters, and experimental times (alpha = 0.05). Results: Non-surgical periodontal treatment with PDT or SRP led to statistically significant reductions in TNF-alpha level 30 days following treatment. There were similar levels of TNF-alpha and RANKL at the different time points in both groups, with no statistically significant differences. Conclusion: SRP and PDT had similar effects on crevicular TNF-alpha and RANKL levels in patients with aggressive periodontitis. J Periodontol 2009;80:98-105.

Replacement of Hopeless Retained Primary Teeth by Immediate Dental Implants: A Case Report

Hopeless retained primary teeth without permanent successors represent a restorative challenge for clinicians, along with esthetic and functional problems for patients. While various treatment approaches for congenitally missing teeth have been proposed, the replacement of a missing tooth with a dental implant offers specific advantages, such as preservation of the alveolar crest and elimination of the need to restore the adjacent teeth, over other options for tooth replacement. The aim of this article was to illustrate the surgical and prosthetic treatment with implants of a patient with primary teeth without permanent successors. INT J ORAL MAXILLOFAC IMPLANTS 2009;24:151-154

Antimicrobial and mechanical properties of acrylic resins with incorporated silver-zinc zeolite - part I

Objective: The purpose of this in vitro study was to evaluate the antimicrobial activity of acrylic resins containing different percentages of silver and zinc zeolite, and to assess whether the addition of zeolite alters the flexural and impact strength of the resins. Background: The characteristics of acrylic resins support microorganism development that can threaten the health of the dentures user. Material and methods: A microwave-polymerised (Onda-Cryl) and two heat-polymerised (QC20 and Lucitone 550) acrylic resins were used. The materials were handled according to the manufacturers` instructions. Fifty rectangular-shaped specimens (8 x 10 x 4mm) were fabricated from each resin and assigned to 5 groups (n = 10) according to their percentage of Irgaguard B5000 silver-zinc zeolite (0%- control, 2.5%, 5.0%, 7.5% and 10%). Flexural strength and Izod impact strength were evaluated. The antimicrobial activity against two strains of Candida albicans and two strains of Streptococcus mutans was assessed by agar diffusion method. Data were analysed statistically by one-way ANOVA and Tukey`s test at 5% significance level. Results: The addition of 2.5% of Irgaguard B5000 to the materials resulted in antimicrobial activity against all strains. Flexural strength decreased significantly with the addition of 2.5% (QC20 and Lucitone 550) and 5.0% (Onda-Cryl) of Irgaguard B5000. The impact strength decreased significantly with the addition of 2.5% (Lucitone 550) and 5.0% (QC20 and Onda-Cryl) of zeolite. Conclusion: The addition of silver-zinc zeolite to acrylic resins yields antimicrobial activity, but may affect negatively the mechanical properties, depending on the percentage of zeolite.