The relation between decentralised structure, budgetary participation and organisational commitment : the moderating role of managers' value orientation towards innovation

Reports the results of a study which investigated the moderating role of managers’ value orientation towards innovation (VOI) on the relationships between managers’ organisational commitment and two management control features – decentralised organisational structure and budgetary participation. Data for the study were collected from 116 managers in manufacturing firms. The results indicate that managers’ VOI has a significant moderating effect on the relationships between the two management control features and managers’ organisational commitment. The results reveal that the relationships are stronger for managers with high VOI than for managers with low VOI. These results have implications for enhancing managers’ organisational commitment through the design of management control systems appropriate for the extent of innovative work values promoted by organisations.

Variations in vascular access flows in haemodialysis can depend on needle orientation

Introduction: While using the Transonic Qc[TM] machine to assess access flow in arteriovenous fistulae (AVF), we observed that when compared to antegrade arterial needle insertion, retrograde arterial needle insertion could regularly produce lower access flow measurements. This study sought to explore this phenomenon.

Method: 23 patients entered and 20 finished the study. Patient selection criteria included: functioning AVF and an adequate AVF length for either retrograde or antegrade arterial needle insertion. After ensuring stable and similar blood pressures, 3 flow measurements were taken during the first 2 hours on the same dialysis day of 3 consecutive weeks using antegrade needle insertion then were repeated on 3 further consecutive weeks using retrograde insertion.

Results: Overall, access flows measured with retrograde insertion were significantly lower by a mean difference of 107.15 ml/min (57-484 ml/min) than the flows measured with antegrade needle placement. In 5/20, 3 recorded minimal difference and 2 had a higher access flows during retrograde insertion. No recirculation was observed during either antegrade or retrograde needle insertion. The paired t-test showed that there was significant difference between the antegrade versus retrograde mean measurements (p = 0.005).

Conclusion: Although the sample size is small and the number of measurements limited, we conclude that access flows may be greater with an antegrade arterial orientation compared to flows recorded with a retrograde orientation. The phenomenon behind this conclusion is yet to be investigated. We suggest that when using the Transonic Qc[TM] access measurement device the arterial needle should always be in the same direction for each measurement for each individual patient.

Effect of structure relaxation on the plastic deformation behaviour in a Zr-based BMG under indenter

Vickers and nano indentations were performed on a structurally relaxed Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG), and the evolution of the shear bands in the relaxed BMG was investigated and compared to that in the as-cast alloy. Results indicate that the plastic deformation in the BMG with structure relaxation is accommodated by the semicircular (primary) and radial (secondary) as well as tertiary shear bands. Quantitatively, the shear band density in the relaxed alloy was much lower than that in the as-cast alloy. The annihilation of free volume caused by the annealing was responsible for the embrittlement of the sample with structure relaxation.

An analysis of microband orientation in hot deformed aluminium alloy AA5052 using forward and reverse torsion

The effects of strain path reversal on the macroscopic orientation of microbands in AA5052 have been studied using high resolution electron backscatter diffraction. Deformation was carried using two equal steps of forward/forward or forward/reverse torsion at a temperature of 300°C and strain rate of 1s-1 to a total equivalent tensile strain of 0.5. In both cases microbands were found in the majority of grains examined with many having more than one set. The microbands appear to cluster at specific angles to the macroscopic deformation. For the forward/forward condition microbands clustered around -20° and +45° to the maximum principle stress direction and at ± 30-35° to the principal strain direction. For the forward/reverse condition significantly more spread in microband angle was observed though peaks were visible at ±35° with respect to principal stress direction and at -40° and +30° with respect to the principal strain direction of the reverse torsion. This suggests the microbands formed in the forward deformation have or are dissolving and any new microbands formed are related to the deformation conditions of the final strain path.

EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation

The aim of the present investigation was to determine the orientation dependence of substructure characteristics in an austenitic Fe−30wt%Ni model alloy subjected to hot plane strain compression. Deformation was carried out at a temperature of 950 °C using a strain rate of 10 s^₋₁ to equivalent strain levels of approximately 0.2, 0.4, 0.6 and 0.8. The specimens obtained were analysed using a fully automatic electron backscatter diffraction technique. The crystallographic texture was characterized for all the strain levels studied and the subgrain structure was quantified in detail at a strain of 0.4. The substructure characteristics displayed pronounced orientation dependence. The major texture components, namely the copper, S, brass, Goss and rotated Goss, generally contained one or two prominent families of parallel larger-angle extended subboundaries, the traces of which on the longitudinal viewing plane appeared systematically aligned along the {111} slip plane traces, bounding long microbands subdivided into slightly elongated subgrains by short lower-angle transverse subboundaries. Relatively rare cube-orientated grains displayed pronounced subdivision into coarse deformation bands containing large, low-misorientated subgrains. The misorientation vectors across subboundaries largely showed a tendency to cluster around the sample transverse direction. Apart from the rotated Goss texture component, the stored energy levels for the remaining components were principally consistent with the corresponding Taylor factor values.

Effect of orientation stability on recrystallization textures of deformed aluminium single crystals

High purity Al single crystals of the Cube (0 0 1)[1 0 0] and rotated Cube (0 1 1)[0 1 ¯ 1] orientations have been deformed in plane strain compression in a channel die. Deformation was carried out at temperatures between 25 and 600 8C up to strains of 1.2. The as-deformed microstructure has been characterised using electron microscopy and electron backscattered diffraction (EBSD).
Annealing was carried out for various times and temperatures. The recrystallized microstructure has been studied using electron microscopy, and the orientation of recrystallized grains determined using EBSD. After cold deformation and annealing both orientations exhibited a random recrystallization texture component. After hot deformation both orientations retained a similar annealing texture to their starting deformation texture. The annealing texture of deformed single crystals was found to be more sensitive to the temperature of deformation than the stability of the orientation.

Orientation-specific attentional set effects

The thesis is a theoretical and experimental exploration of visual attention: when and how does knowing a feature of something we are about to see help us to see that thing? Attentional benefits occurred under short inspection times with high distraction intensity, and long inspection times with low distraction intensity.

Influences on organisational performance : marketing research, market environment and orientation

Findings demonstrated a strong association between market orientation and organisational performance. However, other associations were marginal with no direct relationship between marketing research utilisation and organisational performance, although this was positively mediated by market orientation. The implications being, organisations need to be market oriented and utilise research information to remain competitive.

Firm survival through a crisis : the influence of market orientation, marketing innovation and business strategy

As an outcome of the economic crisis, the global manufacturing sector is collapsing. Focusing on Chinese manufacturing small and medium enterprises (SMEs), this study investigates whether marketing innovation, defined as improvements in the marketing mix, can assist in withstanding the challenges of operating under the current economic conditions. A conceptual model linking market orientation, marketing innovation, competitive advantage and firm survival is tested using structural equation modelling. Three key findings are derived. First, the examined Chinese manufacturing SMEs had a greater perceived likelihood of survival had they developed and sustained a competitive advantage. Second, marketing innovation assisted in developing and sustaining competitive advantages based on differentiation and cost leadership strategies. Third, marketing innovation capabilities improved when the examined manufacturing SMEs were competitor oriented and had good inter-functional capabilities.

A 7Li and 19F NMR relaxation study of LiCF3SO3 in plasticised solid polyether electrolytes

⁷Li and ¹⁹F NMR relaxation time (T₁, T₂, T_1ρ) measurements have been used to probe the dynamics of LiCF₃SO₃ dissolved in an amorphous co-polymer poly(ethylene oxide-co-propylene oxide), and in particular the influence of the plasticising agents propylene carbonate and dimethyl formamide. The changes in relaxation behaviour of ¹⁹F and ⁷Li with increasing plasticiser concentration are very different, as is the effect of each plasticiser. These differences can be explained qualitatively in terms of the interaction between the plasticiser and the ions. Preliminary ⁷Li T_1ρ measurements reveal two components at low temperatures.

The effect of solvent uptake on the relaxation behaviour, morphology and mechanical properties of a poly(ether ether ketone)/poly(etherimide) blend

The effects of solvent uptake on the relaxation behaviour, morphology and mechanical properties of poly(ether ether ketone) (PEEK), poly(etherimide) (PEI) and a 50/50 PEEK/PEI blend have been investigated. Amorphous films were immersed in acetone at 25°C, 35°C and 45°C until equilibrium uptake was achieved. The films were then examined by wide angle X-ray scattering (WAXS), differential scanning calorimetry (d.s.c.), dynamic mechanical relaxation spectroscopy and mechanical testing. WAXS and d.s.c. revealed that the degree of solvent induced crystallinity in PEEK is constant with immersion temperature, whereas the degree of induced crystallinity in the 50/50 blend is strongly temperature dependent. The dynamic mechanical studies confirmed that a significant decrease in glass transition temperature results from the plasticizing effect of the solvent and that solvent and thermally crystallized samples have different relaxation characteristics. Mechanical property tests showed that the yield stress and tensile strength of the blend are dominated by PEEK and the degree of crystallinity, while the modulus is more sensitive to the extent of plasticization.

13 C NMR spin–lattice relaxation times as a probeof local polymer dynamics in plasticized polyethers

¹³C NMR spin–lattice relaxation times T₁ are used to investigate the effect of low molecular weight diluents, including N,N-dimethylformamide, N-methylformamide, propylene carbonate, γ-butyrolactone, triglyme and tetraglyme, on the local polymer segmental motion in polyether–urethane networks. In all cases, an increase in the local mobility is deduced from the increasing T₁ measurements consistent with a decreasing glass transition temperature. The extent of plasticization, however, is dependent on the nature of the small molecules. Those molecules which can either form strong polymer-diluent interactions (for example through dipolar interactions) or are themselves rigid, give the least enhancement of polymer mobility and the greatest deviation from the Fox equation for T_g. In the presence of alkali metal salts, N,N-dimethylformamide and propylene carbonate are shown to have opposite effects on the local polymer motion, as seen from the T₁ measurements. In both cases, addition of the plasticizers increases the ¹³C T₁ relaxation times for the plasticizer. However, propylene carbonate decreases the polymer ¹³C T₁ whilst N,N-dimethylformamide results in the expected increase in polymer ¹³C T₁.

Dynamic mechanical thermal analysis studies of factors influencing relaxation in polyetherurethane based solid electrolytes

Dynamic mechanical thermal analysis (DMTA) has been used to study the effects of plasticizers on the mobility and homogeneity of a series of solid polymer electrolytes (SPEs). With reference to previously published results on similar systems containing LiClO₄ salts and tetraglyme as plasticizer, the effects of propylene carbonate (PC) on the glass transition temperature (T_g) of the SPE and on the distribution of relaxation times within the sample are discussed; at low plasticizer concentration PC has little effect on T_g as measured by DMTA in comparison with tetraglyme, and at higher plasticizer concentrations PC significantly broadens the mechanical relaxation behaviour indicating a greater degree of dynamical heterogeneity within the sample. A second low temperature relaxation is evident at lower PC contents indicating that some regions of this plasticized SPE are distinctly more mobile than others or perhaps, on this length scale, that some degree of phase separation is present. Activation energies for the mechanical relaxation were also determined as a function of PC concentration and are significantly greater than those determined from conductivity measurements.

Robust ODF smoothing for accurate estimation of fiber orientation

Q-ball imaging was presented as a model free, linear and multimodal diffusion sensitive approach to reconstruct diffusion orientation distribution function (ODF) using diffusion weighted MRI data. The ODFs are widely used to estimate the fiber orientations. However, the smoothness constraint was proposed to achieve a balance between the angular resolution and noise stability for ODF constructs. Different regularization methods were proposed for this purpose. However, these methods are not robust and quite sensitive to the global regularization parameter. Although, numerical methods such as L-curve test are used to define a globally appropriate regularization parameter, it cannot serve as a universal value suitable for all regions of interest. This may result in over smoothing and potentially end up in neglecting an existing fiber population. In this paper, we propose to include an interpolation step prior to the spherical harmonic decomposition. This interpolation based approach is based on Delaunay triangulation provides a reliable, robust and accurate smoothing approach. This method is easy to implement and does not require other numerical methods to define the required parameters. Also, the fiber orientations estimated using this approach are more accurate compared to other common approaches.

Marketing planning : operationalising the market orientation strategy

Despite strong empirical validation of the relationship between market orientation and business performance, the literature is inconclusive on the implementation of the strategy. This paper reviews the implementation of market orientation, and investigates the associations between market orientation and marketing planning and their associations with business performance. A survey of 216 Australian larger business organisations was conducted to find evidence of these relationships. The results highlight a close association between market orientation and marketing planning, with virtually the same level of association between them, and the business performance measures used. This evidence suggests that they arguably represent the same domain. The results suggest that marketing practitioners may use the marketing planning technique as an intangible productive resource to operationalise the market orientation strategy, and use it to design a specific style and magnitude of market orientation suitable for an organisation.