Investigations on selected chalcogenide glasses towards the realization of photonic devices

Among various optical sensing schemes, infrared spectroscopy is a powerful tool for detecting and determining the composition of complex organic samples since vibrational finger prints of all biomolecules and organic species are located in this window. This spectroscopic technique is simple, reliable, fast, non-destructive, cost-effective while having low sensitivity. Use of metallic nanoparticles in association with a good IR transparent sensing substrate, is one of the promising solutions to enhance the sensitivity. Chalcogenide glasses are promising substrate material because of their extended optical transmission window starting from the visible to the far infrared range up to 20 μm, high refractive index usually between 2 and 3 and high optical nonlinearity, which make them good candidates as IR sensors and optical ultrafast nonlinear devices. These glasses are favorable sensor materials for the infrared spectral range because of their high IR transparency to allow for low optical loss at wavelengths corresponding to the characteristic optical absorption bands of organic molecules, high refractive index for tight confinement of optical energy within the resonator structure, processibility into thin film form, chemical compatibility for adhesion of silver nano particles and thin films and resistance to the chemical environment to be sensed. Molecules adsorbed to silver island structures shows enhanced IR absorption spectra and the extent of enhancement is determined by many factors such as the size, density and morphology of silver structures, optical and dielectric properties of the substrate material etc.

Ultrassonic Analysis of UO2 Pellets

Ceramic materials have been widely used for various purposes in many different industries due to certain characteristics, such as high melting point and high resistance to corrosion. In the nuclear area, ceramics are of great importance due to the process of fabrication of fuel pellets for nuclear reactors. Generally, high accuracy destructive techniques are used to characterize nuclear materials for fuel fabrication. These techniques usually require costly equipment and facilities, as well as experienced personnel. This paper aims at presenting an analysis methodology for UO2 pellets using a non-destructive ultrasonic technique for porosity measurement. This technique differs from traditional ultrasonic techniques in the sense it uses ultrasonic pulses in frequency domain instead of time domain. Therefore, specific characteristics of the analyzed material are associated with the obtained frequency spectrum. In the present work, four fuel grade UO2 pellets were analyzed and the corresponding results evaluated.

Ultrasonic Spectral Analysis for Nuclear Fuel Characterization

Ceramic materials have been widely used for various purposes in many different industries due to certain characteristics, such as high melting point and high resistance to corrosion. Concerning the areas of applications, automobile, aeronautics, naval and even nuclear, the characteristics of these materials should be strictly controlled. In the nuclear area, ceramics are of great importance once they are the nuclear fuel pellets and must have, among other features, a well controlled porosity due to mechanical strength and thermal conductivity required by the application. Generally, the techniques used to characterize nuclear fuel are destructive and require costly equipment and facilities. This paper aims to present a nondestructive technique for ceramic characterization using ultrasound. This technique differs from other ultrasonic techniques because it uses ultrasonic pulse in frequency domain instead of time domain, associating the characteristics of the analyzed material with its frequency spectrum. In the present work, 40 Alumina (Al2O3) ceramic pellets with porosities ranging from 5% to 37%, in absolute terms measured by Archimedes technique, were tested. It can be observed that the frequency spectrum of each pellet varies according to its respective porosity and microstructure, allowing a fast and non-destructive association of the same characteristics with the same spectra pellets.

Analysis of Ultrasonic Techniques for the Characterization of Microfiltration Polymeric Membranes

The use of polymeric membranes is extremely important in several industries such as nuclear, biotechnology, chemical and pharmaceutical. In the nuclear area, for instance, systems based on membrane separation technologies are currently being used in the treatment of radioactive liquid effluent, and new technologies using membranes are being developed at a great rate. The knowledge of the physical characteristics of these membranes, such as, pore size and the pore size distribution, is very important to the membranes separation processes. Only after these characteristics are known is it possible to determine the type and to choose a particular membrane for a specific application. In this work, two ultrasonic non destructive techniques were used to determine the porosity of membranes: pulse echo and transmission. A 25 MHz immersion transducer was used. Ultrasonic signals were acquired, for both techniques, after the ultrasonic waves passed through a microfiltration polymeric membrane of pore size of 0.45 μm and thickness of 180 μm. After the emitted ultrasonic signal crossed the membrane, the received signal brought several information on the influence of the membrane porosity in the standard signal of the ultrasonic wave. The ultrasonic signals were acquired in the time domain and changed to the frequency domain by application of the Fourier Fast Transform (FFT), thus generating the material frequency spectrum. For the pulse echo technique, the ultrasonic spectrum frequency changed after the ultrasonic wave crossed the membrane. With the transmission technique there was only a displacement of the ultrasonic signal at the time domain.

Oil Flow Rate Measurements Using 198au And Total Count Technique

In industrial plants, oil and oil compounds are usually transported by closed pipelines with circular cross-section. The use of radiotracers in oil transport and processing industrial facilities allows calibrating flowmeters, measuring mean residence time in cracking columns, locate points of obstruction or leak in underground ducts, as well as investigating flow behavior or industrial processes such as in distillation towers. Inspection techniques using radiotracers are non-destructive, simple, economic and highly accurate. Among them, Total Count, which uses a small amount of radiotracer with known activity, is acknowledged as an absolute technique for flow rate measurement. A viscous fluid transport system, composed by four PVC pipelines with 13m length (12m horizontal and 1m vertical) and ½, ¾, 1 and 2-inch gauges, respectively, interconnected by maneuvering valves was designed and assembled in order to conduct the research. This system was used to simulate different flow conditions of petroleum compounds and for experimental studies of flow profile in the horizontal and upward directions. As 198Au presents a single photopeak (411,8 keV), it was the radioisotope chosen for oil labeling, in small amounts (6 ml) or around 200 kBq activity, and it was injected in the oil transport lines. A NaI scintillation detector 2”x 2”, with well-defined geometry, was used to measure total activity, determine the calibration factor F and, positioned after a homogenization distance and interconnected to a standardized electronic set of nuclear instrumentation modules (NIM), to detect the radioactive cloud.

Dating of sediments in the Biscay bay: Implication for pollution chronology

Important historical informations on the temporal changes of anthropogenic pollution in marine environment can be assessed using sediment analysis. Dating is a crucial prerequisite to reconstruct pollution events, to calculate fluxes, and thus to allow comparison between different sites. This work presents estimates of accumulation rates of sediments in the Bay of Biscay. Fives cores were collected during RIKEAU 2002 cruise on board o/v Thalia in order to study temporal changes in PAH and organohalogens compounds content of sediment. We compare chronostratigraphic estimates on cores derived from the natural radionuclide 210Pb in excess with estimates from the known times of introduction of the artificial radionuclide 137Cs to the environment. 210Pb, 226Ra and 137Cs were measured directly by non-destructive gamma spectrometry using a well type γ-detector. Total 210Pb and 226Ra activities vary from 30 to 150 mBq g-1, and 20 to 36 mBq g-1 respectively; 137Cs presents lower levels (< 5 mBq g-1). Profiles of 210Pb in three cores present a well mixed layer, from 2-3 to 10 cm, in the uppermost sediments, followed by an exponential decrease of activities, suitable for the determination of sedimentation rates. Under constant flux and sedimentation rate assumptions, vertical accretion rates derived from 210Pb present a large range from nearly 0.1 cm yr-1 up to almost 0.3 cm yr-1. Differences are mainly due to relative position of studied cores regarding the muddy patch. Although the moderate level of 137Cs limits the accuracy of this dating method, profiles of 137Cs with depth strengthen mean rates derived from 210Pb data. The implication of this dating on pollutant inputs in sediments of the Bay of Biscay is briefly discussed.

Does therapeutic writing help people with long-term conditions? Systematic review, realist synthesis and economic considerations

Background Writing therapy to improve physical or mental health can take many forms. The most researched model of therapeutic writing (TW) is unfacilitated, individual expressive writing (written emotional disclosure). Facilitated writing activities are less widely researched. Data sources Databases including: MEDLINE, EMBASE, PsychINFO, Linguistics and Language Behavior Abstracts, AMED, and CINHAL were searched from inception to March 2013. Review methods Four TW practitioners provided expert advice. Study procedures were conducted by one reviewer and checked by a second. Randomised controlled trials (RCTs) and non-randomised comparative studies were included. Quality was appraised using the Cochrane risk of bias tool. Unfacilitated and facilitated TW studies were analysed separately under ICD-10 chapter headings. Meta-analyses were performed where possible using Revman 5.2. Costs were estimated from an NHS perspective and three cost-consequence case studies were prepared. Realist synthesis followed RAMESES guidelines. Objectives To review the clinical and cost-effectiveness of TW for people with long-term health conditions (LTCs) compared to no writing, or other controls, reporting any relevant clinical outcomes. To conduct a realist synthesis to understand how TW might work, and for whom. Results From 14,658 unique citations, 284 full text papers were reviewed and 64 studies (58 RCTs) were included in the final effectiveness reviews. Five studies examined facilitated TW, these were extremely heterogeneous with unclear or high risk of bias, but suggested that facilitated TW interventions may be beneficial in individual LTCs. Unfacilitated expressive writing was examined in 59 studies of variable, or unreported, quality. Overall there was very little or no evidence of any benefit reported in the following conditions (number of studies): HIV (six); breast cancer (eight); gynaecological and genitourinary cancers (five); mental health (five); asthma (four); psoriasis (three); chronic pain (four). In inflammatory arthropathies (six) there was a reduction in disease severity (n= 191, standardised mean difference (SMD) - 0.61 [95% confidence intervals (95% CI) -0.96, -0.26]) in the short term on meta-analysis of four studies. For all other LTCs there was either no, or sparse, data with no, or inconsistent, evidence of benefit. Meta-analyses conducted across all the LTCs provided no evidence that unfacilitated EW had any effect on depression at short term (n= 1,563, SMD -0.06, 95% CI -0.29 to 0.17, substantial heterogeneity), or long term (n= 778, SMD-0.04 95% CI -0.18 to 0.10, little heterogeneity) follow up, or on anxiety, physiological or biomarker-based outcomes. One study reported costs, none reported cost-effectiveness, twelve reported resource use; meta-analysis suggested reduced medication use but no impact on health centre visits. Estimated costs of intervention were low, but there was insufficient evidence to judge cost-effectiveness. Realist review findings suggested that facilitated TW is a complex intervention and group interaction contributes to the perception of benefit. It was unclear from the available data who might benefit most from facilitated TW. Limitations Difficulties with developing realist review programme theory meant that mechanisms operating during TW remain obscure. Conclusions Overall there is little evidence to support the effectiveness or cost-effectiveness of unfacilitated expressive writing interventions in people with LTCs. Further research focussed on facilitated TW in people with LTCs could be informative.

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Estimation of leaf area in grapevine cv. Syrah using empirical models

Aiming to obtain empirical models for the estimation of Syrah leaf area a set of 210 fruiting shoots was randomly collected during the 2013 growing season in an adult experimental vineyard, located in Lisbon, Portugal. Samples of 30 fruiting shoots were taken periodically from the stage of inflorescences visible to veraison (7 sampling dates). At the lab, from each shoot, primary and lateral leaves were separated and numbered according to node insertion. For each leaf, the length of the central and lateral veins was recorded and then the leaf area was measured by a leaf area meter. For single leaf area estimation the best statistical models uses as explanatory variable the sum of the lengths of the two lateral leaf veins. For the estimation of leaf area per shoot it was followed the approach of Lopes & Pinto (2005), based on 3 explanatory variables: number of primary leaves and area of the largest and smallest leaves. The best statistical model for estimation of primary leaf area per shoot uses a calculated variable obtained from the average of the largest and smallest primary leaf area multiplied by the number of primary leaves. For lateral leaf area estimation another model using the same type of calculated variable is also presented. All models explain a very high proportion of variability in leaf area. Our results confirm the already reported strong importance of the three measured variables (number of leaves and area of the largest and smallest leaf) as predictors of the shoot leaf area. The proposed models can be used to accurately predict Syrah primary and secondary leaf area per shoot in any phase of the growing cycle. They are inexpensive, practical, non-destructive methods which do not require specialized staff or expensive equipment.

Waterpower : a geophysical and archaeological investigation of the waterpower system at the West Point Foundry, Cold Spring, New York

Waterpower: A Geophysical and Archaeological Investigation of the Waterpower System at the West Point Foundry, Cold Spring, New York, describes the results of ground penetrating radar surveys and archaeological excavation undertaken by Michigan Technological University (MTU) archaeologists during the summer of 2003 at the West Point Foundry, Cold Spring, New York. 2003 constituted MTU's second field season at the foundry. Fieldwork concentrated on the foundry's waterpower system, an intricate network of surface and subsurface drains, races, flumes, waterwheels, turbines, dams, and ponds that powered operations and regulated water flow throughout the site. Archaeologists utilized non-destructive geophysical technology, which expedited survey, facilitated placement of excavation units, and provided a model for future archaeogeophysical research at industrial sites. Features discovered during excavation provided valuable information pertaining to the waterpower system's construction and its functions. Data from ground penetrating radar surveys, archaeological excavation, historical photographs, documents, and maps permitted the development of a provisional chronology of the development of various components of the West Point Foundry's waterpower system. Information gathered during this project serves as an aid in sit interpretation and rehabilitation.

Ageing seabreams: A comparative study between scales and otoliths

Otoliths and scales were used to determine age and growth of: Boops boops (Linnaeus, 1758), Diplodus vulgaris (Geoffroy Saint-Hilaire, 1817), Diplodus sargus (Linnaeus, 1758), Lithognathus mormyrus (Linnaeus, 1758), Pagellus acarne (Risso, 1827), Pagellus erythrinus (Linnaeus, 1758) and Spondyliosoma cantharus (Linnaeus, 1758). These structures came from previous studies conducted in southern Portugal, and complemented by market sampling and beach seining. Von Bertalanffy growth functions were estimated with otolith and scale readings. Results indicate that otoliths are better structures for ageing these species but scales can also be used as a non-destructive technique and with satisfactory results. The exceptions were R erythrinus and S. cantharus for which scales provided better results. (c) 2007 Elsevier B.V. All rights reserved.

Impacto de la resiliencia en pacientes con Artritis Reumatoide

Introducción: La artritis reumatoide (AR) es una enfermedad autoinmune-inflamatoria, que compromete las articulaciones diartrodiales. Tiene una importante repercusión sistémica que incluye la depresión; por lo tanto, tiene un severo impacto sobre la calidad de vida. Es posible que mecanismos de defensa, tales como la resiliencia, puedan amortiguar dicho impacto. Metodología: estudio de corte transversal, multicéntrico (análisis inicial dentro del grupo AR, con muestra no probabilística de 66 pacientes, posterior selección aleatoria simple de 16 pacientes de la muestra inicial y selección de 16 individuos sanos pareados). Posteriormente, se comparó la resiliencia entre sujetos con AR y sujetos sanos, mediante las escalas RS y CD-RISC25. Adicionalmente, se aplicaron las escalas EEAE, EADZ, SF-36 y PANAS. Los datos fueron evaluados mediante el coeficiente de correlación de Spearman, las pruebas U Mann-Whitney, Kruskall-Wallis, T de Student y análisis de varianza. Resultados: se encontraron diferencias significativas en las estrategias de afrontamiento no espirituales en grupos de resiliencia baja, media y alta; diferencias en las medianas de resiliencia en los grupos de depresión por EAZD en los pacientes. No se encontraron resultados significativos en las variables clínicas de la AR ni en la comparación con sujetos sanos. Conclusiones: el uso de estrategias de afrontamiento no espirituales y la ausencia de depresión, se asoció a mayores niveles de resiliencia en los pacientes con AR, por lo cual, los componentes emocionales y cognitivos se asocian a la resiliencia.

Caracterização material e microbiológica de espécimes fotográficos

Neste trabalho foram estudadas quatro espécies fotográficas, dois ambrótipos do séc. XIX e dois negativos de gelatina do séc. XX. Estas espécies são suscetiveis a degradações, físicas, químicas e microbiológicas. Técnicas de análise não destrutivas como, a fotografia, a microscopia ótica, a microscopia eletrónica de varrimento e espetroscopia de raios-X por dispersão em energias, a micro-espetroscopia de infravermelho em modo de reflexão total atenuada, a micro-espetroscopia de Raman e a micro-difração de raios-X foram utilizadas na caracterização material. A colonização microbiológica das amostras foi estudada através do isolamento e caracterização dos microrganismos contaminantes. Foram ainda realizados estudos de determinação de atividade celulolítica para os isolados fúngicos provenientes dos ambrótipos bem como ensaios de simulação, nos quais se utilizaram estes isolados para induzir contaminação em ambrótipos contemporâneos e assim avaliar o seu potencial biodeteriogénico. Foi ainda avaliado o potencial biodeteriogénico de isolados bacterianos em negativos de gelatina contemporâneos; Abstract: Material and microbiological characterization of photographic specimens This work presents a scientific study of four photographic specimens, two ambrotypes and two gelatin-silver negative plates from 19th and 20th century, respectively. These specimens are susceptible to physical, chemical and microbiological degradations. A non-destructive approach was used based on techniques such as technical photography, optical microscopy, scanning electron microscopy, infrared micro-spectroscopy, micro-Raman spectroscopy and X-rays micro-diffraction. Microbiological colonization of the samples was studied by isolation and characterization of the contaminating microorganisms. Studies to evaluate cellulolytic activity of fungal isolates from the ambrotypes were carried out and also simulation assays in which were used these isolated to induce contamination in contemporary ambrotypes were done to evaluate their biodeteriogenic potential. It was also studied the biodeteriogenic potential of the bacterial isolates from gelatin-silver negative plates which were subsequently inoculated in contemporary gelatin-silver negatives.

Portuguese ecotypes of Opuntia ficus-indica differ in biomass production

The Opuntia ficus-indica (L.) Miller is a species from the Cactaceae family with the center of origin and domestication in central Mexico. This species introduction in the Iberia Peninsula occurred, probably, by the end of the 15th century, after the discovery of America, spreading later throughout the Mediterranean basin. In Portugal, O. ficus-indica is located, usually, with a typical ruderal behavior, at the edge of roads and paths. In Portugal, as in other Mediterranean regions, inlands areas are under severe draught during extensive summers, in particular, and global warming is expected to affect them deeply in the near future. O. ficus-indica, by its morpho-physiological characteristics and multiple economic uses, represent an alternative crop for those regions. Sixteen Portuguese O. ficus indica ecotypes and two ‘Italian’ cultivars ("Gialla" and "Bianca") were evaluated for plant vigor and biomass production, by nondestructive methods, in the two years following planting. Biomass production and plant vigor were measured by estimating cladode number, cladode area and fresh weight per plant. Linear models to predict the area of cladodes and fresh weight per plant were previously established using a biometric analysis of 180 cladodes. It was not possible to establish an accurate linear model for dry matter using non-destructive estimation. Significant differences were found among populations in the studied biomass-related parameters, and different groups were unfolded. A group of four Portuguese ecotypes outperformed in terms of biomass production, comparable with the “Gialla” cultivar. This group could be used to start a breeding program with the objective of deploy material for animal feeding, biomass and fruit production. Nevertheless, the ‘Gialla’ cultivar showed the best performance, achieving the highest biomass related parameters, not surprisingly for it is an improved plant material.