Comportamento de variáveis cardiorrespiratórias durante e após exercício, nos meios terra e água, em gestantes e não-gestantes

O objetivo deste trabalho foi comparar o comportamento da pressão arterial (PA) e do consumo de oxigênio (V&O2 ), no exercício em bicicleta ergométrica, realizado na terra (20,8 ± 3,29ºC) e na água (32,4 ± 0,37ºC), por gestantes e não-gestantes, na freqüência cardíaca (FC) do primeiro limiar ventilatório (V&O2LV ) e no período de 30 minutos em repouso sentado na terra, após o exercício. A amostra foi composta por 20 mulheres adaptadas ao meio líquido, com idade entre 28 e 38 anos, sendo 10 gestantes (com idade gestacional entre 27 e 29 semanas) e 10 não-gestantes saudáveis. Foram realizados dois testes em cicloergômetro (um na água e um na terra), na FC correspondente ao V&O2LV , com duração de 30 minutos cada, com intervalo mínimo de 48 e máximo de 72 horas entre eles. Para análise dos resultados, foi utilizada ANOVA two-way e foi estabelecido, como nível de significância, um erro alfa de até 5%. Mulheres não-gestantes e gestantes (no início do último trimestre da gravidez) apresentaram respostas cardiovasculares semelhantes durante exercício contínuo, quando este foi realizado na intensidade correspondente ao V&O2LV . Houve diferenças significativas nos valores da pressão arterial sistólica (PAS) (131,64 ± 8,25; 142,64 ± 11,32), pressão arterial diastólica (PAD) (64,80 ± 5,91; 74,52 ± 5,38), e pressão arterial média estimada (PAM) (87,08 ± 4,18; 97,23 ± 5,70), no exercício aquático e terrestre, respectivamente, no grupo de gestantes. O grupo de não-gestantes também apresentou valores de PAS (130,56 ± 8,49; 135,96 ± 8,74), PAD (67,44 ± 5,73; 69,00 ± 10,18), e PAM estimada (88,48 ± 4,82; 91,32 ± 7,80) mais baixos no exercício na água do que na terra, respectivamente É provável que o estado gravídico potencialize o comportamento mais baixo da PAD e PAM estimada durante exercício aquático. Os valores de V&O2 absoluto não apresentaram diferenças significativas, durante exercício entre gestantes e não-gestantes, como também nos meios aquáticos e terrestres. Após 5 minutos de repouso pós-exercício, tanto a PA quanto o V&O2 já apresentavam valores semelhantes aos de repouso pré-exercício, sendo que este comportamento se manteve constante durante os 25 minutos seguintes. Concluiu-se que, no último trimestre de gestação, a escolha pelo exercício aquático realizado na FC correspondente ao V&O2LV é adequada, pois a gestante poderá realizar um programa de condicionamento cardiovascular, apresentando comportamento de pressão arterial mais baixo do que o correspondente no meio terrestre.

Caracterização parcial e atividades farmacológicas do extrato rico em polissacarídeos sulfatatos da angiosperma marinha Halodule wrightii

Sulfated polysaccharides (PS) are biomolecules with a great biotechnological potential. There are few data about PS from high plants. In addition, pharmacological activities of PS from plants have not been carrying out. The aim of this work was extract PS from the angiosperm Halodule wrightii and study their anticoagulant and antioxidant activities. Histological analysis showed the presence of the PS manly in the roots. A polysaccharide-rich extract was obtained from H. wrightii by proteolysis followed by methanol and TCA precipitation. Chemical, infra-red analysis and agarose gel electrophoresis in 1.3 diaminopropane acetate buffer confirmed the presence of sulfated polysaccharides made by glucose, galactose, xylose and sulfate residues in the proportion 1: 0,9: 1: 1. In addition polyacrilamide electrophoresis have shown that extract is mainly compose by 11kDa sulfated polysaccharides. Pharmacological analysis have shown total antioxidant capacity (CAT) that resulted in 15,21 μg for equivalent of ascorbic acid, scavenging activity of the DPPH radical with 41,36 % of scavenging, activity of reducing power with the maximum of 0,290 nm (50 % of vitamin C activity) and scavenging activity superoxide radical (O2-) with a maximum of 32,23 %. Chelating activity of metal less than 4% and scavenging activity of the radical hydroxyl (OH-) less than 2%. Time of activated partial tromboplastin (aPTT) doubling the time of coagulation from 20μg of and protrombin time (PT) was not present. The data indicate that PS from Halodule wrightii could be considered for future applications in medicine, food production or cosmetic industry

Caracterização parcial e atividades farmacológicas do extrato rico em polissacarídeos sulfatados da angiosperma marinha Halodule wrightii

Sulfated polysaccharides (PS) are biomolecules with a great biotechnological potential. There are few data about PS from high plants. In addition, pharmacological activities of PS from plants have not been carrying out. The aim of this work was extract PS from the angiosperm Halodule wrightii and study their anticoagulant and antioxidant activities. Histological analysis showed the presence of the PS manly in the roots. A polysaccharide-rich extract was obtained from H. wrightii by proteolysis followed by methanol and TCA precipitation. Chemical, infra-red analysis and agarose gel electrophoresis in 1.3 diaminopropane acetate buffer confirmed the presence of sulfated polysaccharides made by glucose, galactose, xylose and sulfate residues in the proportion 1: 0,9: 1: 1. In addition polyacrilamide electrophoresis have shown that extract is mainly compose by 11kDa sulfated polysaccharides. Pharmacological analysis have shown total antioxidant capacity (CAT) that resulted in 15,21 μg for equivalent of ascorbic acid, scavenging activity of the DPPH radical with 41,36 % of scavenging, activity of reducing power with the maximum of 0,290 nm (50 % of vitamin C activity) and scavenging activity superoxide radical (O2-) with a maximum of 32,23 %. Chelating activity of metal less than 4% and scavenging activity of the radical hydroxyl (OH-) less than 2%. Time of activated partial tromboplastin (aPTT) doubling the time of coagulation from 20μg of and protrombin time (PT) was not present. The data indicate that PS from Halodule wrightii could be considered for future applications in medicine, food production or cosmetic industry

Modificação de membranas de quitosana por plasma para uso biológico

Chitosan membranes have been modified by plasma, utilizing the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen. The modified membranes by plasma were compared to the unmodified ones. The membranes were characterized by absorption assay, contact angle, atomic force microscopy (AFM). Also, permeability assay of sodium sulfamerazine from such membranes were carried out. Through the absorption assay and contact angle it was possible to obtain information of the wettability of the membranes and what changes the plasma treatment can promote in relation to it. The plasma treatment using oxygen promoted increase of the wetability and swelling while the samples treated with methane decrease of the wetability and swelling. Through the Optical Emission Spectroscopy (OES) it was possible to identify which species were present in the plasma during the treatment. And through the AFM analysis it was possible to observe the changes nanotopography occurred on the surface of the samples. Permeability assay were archived for all treated membranes and compared to no treated ones. Due to that assay it was possible verify which the plasma treatment increased the permeability spectrum of the membranes which has varied from 1,4548 *10-5cm2.min-1 to 2,7713*10-5cm2.min-1. Chitosan membranes with permeability varied are importance in systems drug delivery, to liberate a wide variety of drugs

Diagnóstico das espécies ativas do plasma usado em tratamentos termoquímicos do titânio

Plasma diagnostics by Optical Emission Spectroscopy were performed for electrical discharge in three gas mixture respecting the combinations z N2 y Ar x H2, z N2 y Ar x O2 e z N2 y Ar x CH4, in which the indexes z and y systematically vary from 1 to 4 and x varies from 0 to 4, every one has dimension SCCM, resulting in 80 combinations. From the all obtained spectrums, the species CH (387,1 nm), N2+ (391,4 nm), Hβ (486,1 nm), Hα (656,3 nm), Ar (750,4 nm), O (777,4 nm) e O (842,6 nm) were analyzed because of their abundance and importance on the kinetic of reaction from the plasma to surface, besides their high dependences on the gases flows. Particularly interesting z, y and x combinations were chosen in order to study the influence of active species on the surface modification during the thermochemical treatment. From the mixtures N2 Ar O2 e N2 Ar CH4 were chosen three peculiar proportions which presented luminous intensity profile with unexpected maximum or minimum values, denominated as plasma anomaly. Those plasma concentrations were utilized as atmosphere of titanium treatment maintaining constant the control parameters pressure and temperature. It has been verified a relation among luminous intensity associated to N2+ and roughness, nanohardness and O atoms diffusion into the crystalline lattice of treated titanium and it has been seen which those properties becomes more intense precisely in the higher points found in the optical profile associated to the N2+ specie. Those parameters were verified for the mixture which involved O2 gas. For the mixture which involves CH4 gas, the relation was determinate by roughness, number of nitrogen and carbon atoms diffused into the titanium structure which presented direct proportionality with the luminous intensity referent to the N2+ and CH. It has been yet studied the formation of TiCN phases on the surface which presented to be essentially directly proportional to the increasing of the CH specie and inversely proportional to the increasing of the specie N2+

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Efeito do tratamento por plasma na proliferação de fibroblastos e esterilização de membranas de quitosana

Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation

Avaliação do efeito de particulados sólidos na eficiência de um inibidor de corrosão recomendado para meios salinos com CO2

The main problem on the exploration activity on petroleum industry is the formation water resulted on the fields producing. The aggravating of this problem is correlated with the advancing technologies used on the petroleum extractions and on its secondary approach objecting the reobtainment of this oil. Among the main contaminants of the water formation are corrosives gases such as: O2, CO2 and H2S, some solids in suspension and dissolved salts. Concerning to those gases the CO2 is the one that produce significant damage for carbon steel on corrosion process of the petroleum and gas industries. Corrosion inhibitors for carbon steel in formation water is one of the most used agents in control of those damages. In this context, the poor investigations of carbon steel corrosion proceeding from solids in suspension is an opened field for studies. On this work the inhibitor effect of the commercial CORRTREAT 703 was evaluated on some specific solids in suspension at saline medium containing 10.000 ppm of de-aerated chloride using CO2 until non oxygen atmosphere been present. For that, quartz, calcium carbonate, magnetite and iron sulphide were subjected to this investigation as the selected solids. The effect of this inhibitor on corrosion process correlated with those specific solids, was measured using electrochemical (resistance of linear polarization and galvanic pair) and gravimetrical techniques. During all the experimental work important parameters were monitored such as: pH, dissolved oxygen, temperature, instantaneous corrosion rate and galvanic current. According to the obtained results it was proved that the suspension solids calcium carbonate and iron sulphide decrease the corrosion process in higher pH medium. Meanwhile the quartz and magnetite been hardness increase corrosion by broking of the passive layer for erosion. In the other hand, the tested inhibitor in concentration of 50 ppm, showed to be effective (91%) in this corrosion process

Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype

Análise do desempenho de um queimador infravermelho funcionando com gás liquefeito de petróleo e glicerina

The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with greater control of emissions due to the passage of exhaust gases through a macro-porous ceramic bed. This paper presents an infrared burner commercial, which was adapted an experimental ejector, capable of promoting a mixture of liquefied petroleum gas (LPG) and glycerin. By varying the percentage of dual-fuel, it was evaluated the performance of the infrared burner by performing an energy balance and atmospheric emissions. It was introduced a temperature controller with thermocouple modulating two-stage (low heat / high heat), using solenoid valves for each fuel. The infrared burner has been tested and tests by varying the amount of glycerin inserted by a gravity feed system. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by a data acquisition system which recorded real-time measurements of the thermocouples attached. The burner had a stable combustion at levels of 15, 20 and 25% of adding glycerin in mass ratio of LPG gas, increasing the supply of heat to the plate. According to data obtained showed that there was an improvement in the efficiency of the 1st Law of infrared burner with increasing addition of glycerin. The emission levels of greenhouse gases produced by combustion (CO, NOx, SO2 and HC) met the environmental limits set by resolution No. 382/2006 of CONAMA

Adesão, proliferação e genotoxicidade celular de celulose bacteriana modificada por plasma

Bacterial cellulose (BC) has a wide range of potential applications, namely as temporary substitute skin in the treatment of skin wounds, such as burns, ulcers and grafts. Surface properties determine the functional response of cells, an important factor for the successful development of biomaterials. This work evaluates the influence of bacterial cellulose surface treatment by plasma (BCP) on the cellular behavior and its genotoxicity potential. The modified surface was produced by plasma discharge in N2 and O2 atmosphere, and the roughness produced by ion bombardment characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Cell adhesion, viability and proliferation on BCP were analysed using crystal violet staining and the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium (MTT) method. Genotoxicity was evaluated using the comet and cytokinesis block micronucleus assay. The results show that the plasma treatment changed surface roughness, producing an ideal cell attachment, evidenced by more elongated cell morphology and improved proliferation. The excellent biocompatibility of BCP was confirmed by genotoxicity tests, which showed no significant DNA damage. The BCP has therefore great potential as a new artificial implant

Sex group composition, social interaction, and metabolism in the fish Nile tilapia

O objetivo deste trabalho foi testar se grupos monossexuais de machos gastam mais energia e exibem perfil agonístico diferente de grupos formados por um macho e uma fêmea na tilápia-do-Nilo (Oreochromis niloticus). Tais diferenças são esperadas, pois machos e fêmeas competem por diferentes recursos reprodutivos. Foram utilizadas duplas de machos (MM) e duplas de macho-fêmea (MF) que permaneceram pareadas por 40 minutos. Durante esse período foi feito o registro da interação agonística (10 minutos iniciais e 10 minutos finais do pareamento) e determinado o gasto energético (consumo de O2) pelo Método de Winckler. A latência para o início dos confrontos (média ± DP, MM = 27,40 ± 25,15 s; MF = 14,22 ± 21,19 s; Mann-Whitney, U = 33,50, P = 0,21) e a freqüência de todas as unidades comportamentais (média ± DP, MM < 72,30 ± 25,29; MF < 73,50 ± 21,65.10/min; Mann-Whitney, P > 0,10) foram semelhantes entre os grupos MM e MF nos 10 minutos iniciais. Isso indica que cada intruso foi considerado um potencial competidor no início da interação. No entanto, a freqüência de ondulação (interação também exibida durante a corte) foi maior para o residente do grupo MF nos 10 minutos finais (média ± DP, MM = 3,56 ± 5,89; MF = 8,56 ± 4,00.10/min; Mann-Whitney, U = 15,50, P = 0,01). A freqüência de fuga, entretanto, foi menor para o intruso do mesmo grupo (média ± DP, MM = 3,90 ± 4,33; MF = 0,44 ± 0,96.10/min; Mann-Whitney, U = 23,50, P = 0,04). Além disso, o perfil agonístico no grupo MM foi composto por um maior número de itens comportamentais do que o MF (para residentes e intrusos). Apesar das diferenças comportamentais, o consumo de O2 não foi afetado pela composição sexual do grupo (média ± DP, MM = 1,93 ± 0,54; MF = 1,77 ± 0,46 mgO2.g peso seco-1.40/min; t-teste de Student, t = 0,71, P = 0,49).

Hemogasometria e variáveis cardiopulmonares após administração do butorfanol em cães anestesiados pelo desfluorano sob ventilação espontânea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do desfluorano, sevofluorano e isofluorano sobre variáveis respiratórias e hemogasométricas em cães

Com este estudo objetivou-se avaliar, comparativamente, os efeitos de três anestésicos inalatórios sobre variáveis respiratórias e hemogasométricas em cães. Para tal, utilizaram-se 30 cães sadios, adultos, machos e fêmeas evitando-se aquelas em estro ou em gestação. Os animais foram separados e protocolados em três grupos de 10 cães cada (G1, G2 e G3). Induziu-se a anestesia geral com administração intravenosa de propofol, na dose de 10±1,3 mg/kg. em seguida procedeu-se à intubação orotraqueal e anestesia geral inalatória pelo desfluorano (G1), sevofluorano (G2) e isofluorano (G3), diluídos em oxigênio a 100,00%, por meio de circuito anestésico tipo semi-fechado, dotado de vaporizadores calibrados para cada agente anestésico. As variáveis estudadas foram Freqüência Respiratória, CO2 ao Final da Expiração, Saturação de Oxihemoglobina, Volume Corrente, Volume Minuto, Pressão Parcial Arterial de O2, Pressão Parcial Arterial de CO2, Excesso de Bases e pH. A avaliação estatística destas variáveis foi realizada pela Análise de Perfil, sendo considerado o nível de significância de 5,00%. Os resultados obtidos permitiram concluir que o desfluorano deprime o sistema respiratório aumentando a pressão parcial arterial de CO2 e o CO2 ao final da expiração; e diminuindo a pressão parcial arterial de O2 e o volume minuto, quando comparado com os outros anestésicos em teste.

Temperatura e tipo de preparo na conservação de produto minimamente processado de abacaxi-'Pérola'

O presente trabalho teve como objetivo avaliar o efeito do tipo de preparo (rodelas e metades) e da temperatura de armazenamento (3ºC, 6ºC e 9ºC) na conservação de produto minimamente processado de abacaxi-'Pérola'. Os frutos, depois de selecionados, lavados e desinfectados com cloro, foram armazenados por 12 horas a 10ºC, antes de serem processados sob condições higiênicas, embalados em contentores de polietileno tereftalatado (rodelas) ou bandeja de isopor recoberta com filme de cloreto de polivinila esticável (metades) e armazenados por até 12 dias. Os produtos foram avaliados quanto à evolução da atmosfera interna na embalagem, respiração, quantidade de suco drenado e evolução da massa fresca e da aparência. Foram testadas, durante o período de armazenamento, a aceitabilidade pelos consumidores, no início do experimento e enquanto a aparência e a análise microbiológica permitiram. A presença de bactérias mesofílicas e coliformes totais e fecais foi avaliada a cada três dias. Durante o armazenamento, a porcentagem de O2 nas embalagens apresentou decréscimo, enquanto a de CO2 aumentou até 20% para as metades e até 1,86% para as rodelas. A intensidade dos cortes no preparo teve influência direta na respiração, assim como nas perdas de suco e de massa fresca. A temperatura influenciou na respiração e foi fator limitante à vida de prateleira do produto, pois os produtos armazenados a 9ºC, conservaram-se por 6 dias, enquanto os mantidos a 3ºC e 6ºC, por até 9 dias.