A neural network seismic detector

This experimental study focuses on a detection system at the seismic station level that should have a similar role to the detection algorithms based on the ratio STA/LTA. We tested two types of neural network: Multi-Layer Perceptrons and Support Vector Machines, trained in supervised mode. The universe of data consisted of 2903 patterns extracted from records of the PVAQ station, of the seismography network of the Institute of Meteorology of Portugal. The spectral characteristics of the records and its variation in time were reflected in the input patterns, consisting in a set of values of power spectral density in selected frequencies, extracted from a spectro gram calculated over a segment of record of pre-determined duration. The universe of data was divided, with about 60% for the training and the remainder reserved for testing and validation. To ensure that all patterns in the universe of data were within the range of variation of the training set, we used an algorithm to separate the universe of data by hyper-convex polyhedrons, determining in this manner a set of patterns that have a mandatory part of the training set. Additionally, an active learning strategy was conducted, by iteratively incorporating poorly classified cases in the training set. The best results, in terms of sensitivity and selectivity in the whole data ranged between 98% and 100%. These results compare very favorably with the ones obtained by the existing detection system, 50%.

An overview of nonlinear identification and control with neural networks.

The aim of this chapter is to introduce background concepts in nonlinear systems identification and control with artificial neural networks. As this chapter is just an overview, with a limited page space, only the basic ideas will be explained here. The reader is encouraged, for a more detailed explanation of a specific topic of interest, to consult the references given throughout the text. Additionally, as general books in the field of neural networks, the books by Haykin [1] and Principe et al. [2] are suggested. Regarding nonlinear systems identification, covering both classical and neural and neuro-fuzzy methodologies, Reference 3 is recommended. References 4 and 5 should be used in the context of B-spline networks.

Anytime information processing based on fuzzy and neural network models

In modern measurement and control systems, the available time and resources are often not only limited, but could change during the operation of the system. In these cases, the so-called anytime algorithms could be used advantageously. While diflerent soft computing methods are wide-spreadly used in system modeling, their usability in these cases are limited.

Completely supervised training algorithms for B-spline neural networks and neuro-fuzzy systems

Complete supervised training algorithms for B-spline neural networks and fuzzy rule-based systems are discussed. By interducing the relationship between B-spline neural networks and certain types of fuzzy models, training algorithms developed initially for neural networks can be adapted by fuzzy systems.

Identification of aircraft gas-turbines dynamics: comparison of classical and neural techniques

A gas turbine is made up of three basic components: a compressor, a combustion chamber and a turbine. Air is drawn into the engine by the compressor, which compresses it and delivers it to the combustion chamber. There, the air is mixed with the fuel and the mixture ignited, producing a rise of temperature and therefore an expansion of the gases. These are expelled through the engine nozzle, but first pass through the turbine, designed to extract energy to keep the compressor rotating [1]. The work described here uses data recorded from a Rolls Royce Spey MK 202 turbine, whose simplified diagram can be seen in Fig. 1. Both the compressor and the turbine are split into low pressure (LP) and high pressure (HP) stages. The HP turbine drives the HP compressor and the LP turbine drives the LP compressor. They are connected by concentric shafts that rotate at different speeds, denoted as NH and NL.

Neural network classification of cerebral embolic signals

The presence of circulating cerebral emboli represents an increased risk of stroke. The detection of such emboli is possible with the use of a transcranial Doppler ultrasound (TCD) system.

Application of radial basis function neural networks to a greenhouse inside air temperature model

The problem with the adequacy of radial basis function neural networks to model the inside air temperature as a function of the outside air temperature and solar radiation, and the inside relative humidity in an hydroponic greenhouse is addressed.

Neural networks PID autotuning with real-time adaptation

Despite the developments in more sophisticated controllers, still the Proportional, Integral and Derivative (PID) controller is by far the controller most widely used in industry automation.

B-splines neural network assisted PID autotuning

This papers describes an extantion of previous works on the subject of neural network proportional, integral and derivative (PID) autotuning. Basically, neural networks are employed to supply the three PID parameters, according to the integral of time multiplied by the absolute error (ITAE) criterion, to a standard PID controller.

B-splines neural networks assisted PID autotuning

This paper describes previous works (1), (2), on neural network pid autotuning. Basically, neural networks are employed to supply PID parameters, according to the ITAE criterion, to a standard PID controller.

On-line adaptation of neural network

The Proportional Integral and Devirative (PID) controller autotuning is an important problem, both in practical and theoretical terms. The autotuning procedure must take place in real-time, and therefore the corresponding optimisation procedure must also be executed in real-time and without disturbing on-line control.

Recent developments in neural network PID autotuning

PID controllers are widely used in industrial applications. Because the plant can be time variant, methods of autotuning of this type of controllers, are of great economical importance, see (Astrom, 1996). Since 1942, with the work of Ziegler and Nichols (Ziegler and Nichols, 1942), several methods have been proposed in the literature. Recently, a new technique using neural networks was proposed (Ruano et al., 1992). This technique has been shown to produce good tunings as long as certain limitations are met.

Neural networks assisted PID autotuning

The Proportional, Integral and Derivative (PID) controllers are standard building blocks for industrial automation. Their popularity comes from their rebust performance and also from their functional simplicity.

Neural network assisted autotuning of industrial PID controllers

A recent servey (1) has reported that the majority of industrial loops are controlled by PID-type controllers and many of the PID controllers in operation are poorly tuned. poor PID tuning is due to the lack of a simple and practical tuning method for avarage users, and due to the tedious procedurs involved in the tuning and retuning of PID controllers.

Comparison of alternative approaches to neural network PID autotuning

In this paper, a scheme for the automatic tuning of PID controllers on-line, with the assistance of trained neural networks, is proposed. The alternative approaches are presented and compared.