Residues of calcium hydroxide-based intracanal medication associated with different vehicles: A scanning electron microscopy evaluation

This study evaluated the presence of residues after removal of calcium hydroxide [Ca(OH)2] associated with different vehicles. Thirty single-rooted teeth were instrumented to a master apical file #25 using 2.5% NaOCl as main irrigant and 17% trisodium EDTA (ethylenediaminetetraacetic acid) as final agent irrigant. Then, the root canals were dressed with Ca(OH)2 associated with silicone oil (Group 1), 2% chlorhexidine gluconate (Group 2), or propylene glycol (Group 3). After coronal sealing, all teeth were kept in a moist environment at room temperature. After 7 days, the teeth were reopened and medicaments were removed using 5 mL of saline solution and instrumentation with master apical file followed by new irrigation with 5 mL of 2.5% NaOCl. Subsequently, teeth were split longitudinally and assessed by scanning electron microscopy. The wall cleanliness of the cervical and apical thirds of the roots were evaluated and scored by three blinded examiners. Statistical analysis was performed using KruskalWallis and Wilcoxon tests at 5% level of significance. All roots had residues of Ca(OH)2 on the canal walls. All experimental groups had similar results (P > 0.05) regardless of the third evaluated. There was significant difference between the apical and cervical thirds only in Group 3 (P < 0.05). Association of different vehicles to Ca(OH)2 does not influence the persistence of residues on the root canal walls. Microsc. Res. Tech. 2012. (C) 2012 Wiley Periodicals, Inc.

In Vitro Study of the influence of the pigments of three colored gels over the light distribution of visible light by digital images

Nowadays the real contribution of light on the acceleration of the chemical reaction for the dental bleaching is under incredulity, mostly because the real mechanisms of its contribution still are obscure. Objectives: Determine the influence of pigment of three colored bleaching gels in the light distribution and absorption in the teeth, to accomplish that, we have used in this experiment bovine teeth and three colored bleaching gels. It is well Known that the dark molecules absorb light and increase the local temperature upraising the bleaching rate, these molecules are located in the interface between the enamel and dentin. Methods: This study was realized using an argon laser with 455nm with 150mW of intensity and a LED with the same characteristics, three colored gels (green, blue and red) and to realize the capture of the digital images it was used a CCD camera connected to a PC. The images were processed in a mathematical environment (MATHLAB, R12 (R)). Results: The obtained results show that the color of the bleaching gel influences significantly the absorption of light in the specific sites of the teeth. Conclusions: This poor absorption can be one of the major factors involved with the incredulity of the light contribution on the process that can be observed in the literature nowadays.

Radiopacity of Portland Cement Associated With Different Radiopacifying Agents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Marginal adaptation of Class 2 adhesive restorations

Objective: Control of microleakage represents a challenge for posterior composite restorations. The technique for composite placement may reduce microleakage. The null hypothesis of this in vitro study was that centripetal incremental insertion of composite resin would result in less microleakage than that obtained with the oblique incremental technique or bulk technique. Method and Materials: Standardized Class 2 preparations were made in 60 caries-free extracted third molars and randomly assigned to 3 groups ( n = 20): ( 1) oblique incremental insertion technique ( control), ( 2) centripetal incremental insertion technique, and ( 3) bulk insertion. The teeth were restored with a total-etch adhesive and micro-hybrid composite resin. The specimens were isolated with nail varnish except for a 2-mm-wide area around the restoration and then thermocycled ( 1,000 thermal cycles, 5 degrees C/ 55 degrees C; 30-second dwell time). The specimens were immersed in an aqueous solution of 50% silver nitrate for 24 hours, followed by 8 hours of immersion in a photo-developing solution and subsequently evaluated for leakage. The microleakage scores ( 0 to 4) obtained from the occlusal and cervical walls were analyzed with median nonparametric tests ( P <.05). Results: The null hypothesis was rejected. All techniques attained statistically similar dentin microleakage scores ( P =.15). The centripetal insertion technique displayed significantly less microleakage than the oblique technique at the enamel margins ( P =.04). Conclusion: None of the techniques eliminated marginal microleakage in Class 2 preparations. However, in occlusal areas, the centripetal technique performed significantly better than the other techniques.

Effect of Resin Cement System and Root Region on the Push-out Bond Strength of a Translucent Fiber Post

Objectives: This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems.Methods: Forty bovine incisors were randomly assigned to five different resin cement groups (n=8). After endodontic treatment and crown removal, translucent glass fiber posts were bonded into the root canal using five different luting protocols (self-cured cement and etch-and-rinse adhesive system; dual-cured cement and etch-and-rinse adhesive system; self-cured cement and self-etch adhesive system; dual-cured cement and self-etch adhesive system; and dual-cured self-adhesive cement). Push-out bond strength was evaluated at three different radicular levels: cervical, middle, and apical. The interface between resinous cement and the post was observed using a stereoscopic microscope.Results: Analysis of variance showed a statistically significant difference among the cements (p<0.05) and the root canal thirds (p<0.05). The self-adhesive resinous cement had lower values of retention.Conclusions: The resin cements used with etch-and-rinse and self-etch adhesive systems seem to be adequate for glass fiber post cementation.

Fungos causadores de podridões pós-colheita em uvas apirênicas no pólo agrícola de Juazeiro - BA e Petrolina - PE

In Brazil, postharvest diseases caused by pathogenic microorganisms are a major problem that causes damage to around 80% of the total fruit production. In the lower middle Sao Francisco river valley numerous studies on identification and control of fungal diseases during postharvest of grapes are needed, in order to minimize losses in this step. In this context, bunches of seedless varieties 'Crimson', 'Sonaka'; 'Superior' and 'Thompson' were collected from July to November 2009, in order to identify and quantify the incidence of pathogenic fungi. The grapes were collected on five farms which specialize in the production of table grapes for export, all located in Juazeiro - BA and Petrolina - PE. During this period, 10 samples were taken. In the fruit farm five plants were used for sampling, and removal of two bunches of grapes per plant, totaling 10 bunches per variety. Subsequently, they were sent to the laboratory of Plant Pathology at UNEB/DTCS where they were placed separately in a moist chamber for 48 hours at an average temperature of 23 degrees C. After this period, isolations of berries and stems in Petri plates containing PDA - potato-dextrose-agar were carried out with 10 repetitions, which were placed on benches under laboratory conditions. From the 8th day on, the presence of Aspergillus niger, Alternaria alternata, Cladosporium herbarum, Lasiodiploidia theobromae was observed, which presented the highest incidence, as well as Rhizopus stolonifer, Penicillium expansum.

Imbibition phases and germination response of Mimosa bimucronata (Fabaceae: Mimosoideae) to water submersion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Development of 22 Polymorphic Microsatellite Loci for the Critically Endangered Morato's Digger Toad, Proceratophrys moratoi

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ultramorphological features of the egg of Telmatoscopus albipunctatus (Williston) (Diptera, Psychodidae)

Aspectos ultramorfológicos do ovo de Telmatoscopus albipunctatus (Williston) (Diptera, Psychodidae). As moscas da família Psychodidae, também conhecidas como moscas de banheiro, são de importância médica e veterinária. Informações gerais sobre ciclo de vida e hábitos do adulto são facilmente encontradas, mas pouco se sabe sobre a morfologia do ovo. Dessa forma, neste estudo, a ultramofologia do ovo de Telmatoscopus albipunctatus (Williston, 1893) foi analisada por microscopia eletrônica de varredura com o objetivo de descrever sua estrutura, provendo importantes dados para futuras comparações entre moscas de diferentes espécies e gêneros. O aspecto geral do ovo de T. albipunctatus é similar a outros Psychodidae, medindo aproximadamente 0.4 mm de comprimento e 0.1 mm de largura. Entretanto, baseado nas esculturas contínuas e descontínuas do exocórion, as quais podem ser espécie-específicas, podemos inferir que os ovos de T. albipunctatus podem sobreviver sob condições de muita umidade ou seca, dificultando o controle da espécie. Nossos resultados ressaltam a importância do uso da microscopia eletrônica como uma ferramenta no estudo dos padrões do exocórion. A morfologia externa do ovo de T. albipunctatus pode ser usada como base para futuros estudos e como ferramenta para comparação de diferentes espécies de moscas do gênero Psychodidae.

Staurogyne rubescens (Aeanthaeeae), a new species from southeastern Brazil

A new species of Acantbaceae, Staurogyne rubescens, is described and illustrated. It is endemic to the Brazilian moist forests on the eastern range of mountains named Serra do Mar and is thus far known only from the states of Rio de Janeiro and São Paulo. Staurogyne rubescens can be distinguished by its lax terminal racemes, with bracts and bracteoles that are foliaceous, and the flowers that have a pink calyx and red corolla. Staurogyne itatiaiae (Wawra) Leonard also has red flowers and occurs in the highlands of the Atlantic rain forest. The distinguishing characters for these two species are presented in tabular format.

Variation in liana abundance and biomass along an elevational gradient in the tropical Atlantic Forest (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Amphibians and reptiles from a highly diverse area of the Caatinga domain: composition and conservation implications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Birds of a central São Paulo woodlot: 1. Censuses 1982-2000

Foram listadas 263 aves próximo e dentro de uma mata semidecídua de 230 ha em meio a plantações de cana-de-açúcar, na região central do Estado de São Paulo, Brasil. Subtraindo-se 67 espécies de áreas abertas, 22 de riachos, 10 vagantes e 12 observadas mais tarde, cerca de 152 espécies de mata e de borda foram observadas entre 1982-86, semelhantemente às observadas em uma mata próxima a Campinas. Ambas as matas perderam espécies gradualmente. Algumas aves evitaram as margens duras dos canaviais, preferindo as margens macias arbustivas. Das espécies de área aberta, parece que 22 desapareceram até 1997, em razão das abundantes chuvas anteriores causadas por El Niño, ou pela raridade de habitats permanentemente abertos nos canaviais; 17 espécies novas eram principalmente noturnas que não haviam sido checadas anteriormente, ou visitantes ocasionais. A mata e as bordas perderam 37 espécies, ganhando 5 de regiões secas e 1 visitante de inverno. Vários migrantes do sul apareceram somente em anos chuvosos antes do recente efeito estufa; algumas aves residentes foram caçadas, e os beija-flores das copas talvez estivessem presentes ainda. As espécies de zonas secas, prones à movimentação ou metapopulacionais, movem os centros de distribuição, camuflando parcialmente a perda de diversidade da mata úmida.

Influência de pré-influência de pré-tratamentos sobre a desidratação osmótica de carambolas

A desidratação osmótica (DO) de fatias de carambola (Averrhoa carambola L.) em solução de sacarose foi estudada, com o objetivo de otimizar o processo. Num primeiro conjunto de experimentos, aplicou-se revestimento de coberturas comestíveis (pectina ou pectina+amido) sobre as fatias, seguido de do em solução aquosa de sacarose (50%, p/p, 27°C). Num segundo conjunto, foi realizada secagem parcial da cobertura, em estufa, antes da DO. Num terceiro conjunto de experimentos testou-se a adição de CaCl2 na solução osmótica. A aplicação dos revestimentos antes da do não melhorou a eficiência (máxima perda água/ganho soluto) devido à grande retenção de umidade e à fácil impregnação de sacarose nos mesmos, enquanto que o tecido vegetal sem revestimento restringiu mais o ganho de soluto e propiciou maior saída de água. A utilização de CaCl2 a 0,04M, na própria solução osmótica de sacarose, melhorou ligeiramente a eficiência do processo, em relação à solução sem o sal. A do em solução de sacarose, sem e com a adição de CaCl2, geraram resultados positivos na qualidade sensorial da carambola em fatias, desidratadas em secador (60 e 70°C), em comparação com a fruta não tratada, sendo que a melhor temperatura de secagem foi 60°C.

SEALING ABILITY of CASTOR OIL POLYMER AS A ROOT-END FILLING MATERIAL

Objective: The purpose of this study was to evaluate the sealing ability of castor oil polymer (COP), mineral trioxide aggregate (MTA) and glass ionomer cement (GIC) as root-end filling materials. Forty-five single-rooted human teeth were cleaned and prepared using a step-back technique. The apical third of each root was resected perpendicularly to the long axis direction. All teeth were obturated with gutta-percha and an endodontic sealer. After, a root-end cavity with 1.25-mm depth was prepared using a diamond bur. The specimens were randomly divided into three experimental groups (n = 15), according to the root-end filling material used: G1) COP; G2) MTA; G3) GIC. The external surfaces of the specimens were covered with epoxy adhesive, except the root-end filling. The teeth were immersed in rhodamine B dye for 24 hours. Then, the roots were sectioned longitudinally and the linear dye penetration at the dentin/material interface was determined using a stereomicroscope. ANOVA and Tukey's tests were used to compare the three groups. The G1 group (COP) presented smaller dye penetration, statistically different than the G2 (MTA) and G3 (GIC) groups (p < 0.05). No statistically significant difference in microleakage was observed between G2 and G3 groups (p > 0.05). The results of this study indicate that the COP presented efficient sealing ability when used as a root-end filling material showing results significantly better than MTA and GIC.