Chemical constituents and antioxidant activity from leaves extracts of terminalia fogiafolia mart. et zucc

CHEMICAL CONSTITUENTS and ANTIOXIDANT ACTIVITY FROM LEAVES EXTRACTS of Terminalia fagifolia Mart. et Zucc. Phytochemical investigation of ethanolic leaves extracts of T. fagifolia led to the isolation of (+)-catechin, sitosterol-3-O-beta-D-glucopyranoside, alpha- and beta-tocopherol, a mixture of lupeol, alpha- and beta-amyrin, sitosterol and a mixture of glicosid flavonoids (CP-13). The structures of these compounds were identified by (1)H and (13)C NMR spectral analysis and comparison with literature data. Absolute configuration of the catechin was determinate by circular dichroism. Antioxidant activity (EC(50)), evaluated by 2,2-diphenyl-1-picrylhidrazyl (DPPH) assay system, decreased in the order: (+)-catechin > hydroalcoholic fraction > CP-13 > aqueous fraction > EtOH extract.

Uso de produto à base de enzima e levedura na dieta de bovinos: digestibilidade dos nutrientes e desempenho em confinamento

Objetivou-se, com este trabalho, avaliar os efeitos da adição de diferentes níveis de enzima mais levedura na dieta de bovinos sobre a digestibilidade aparente dos nutrientes e o desempenho em confinamento, utilizando-se 18 animais machos, mestiços, de origem leiteira, com peso vivo (PV) médio de 190±10 kg e 12 meses de idade, e 27 animais da raça Guzerá com PV médio de 325 kg e idade média de 27 meses. Os níveis de enzima mais levedura foram zero (controle), 5 g de enzima (E) mais 5 g de levedura (L) e 10 g de E mais 5 g de L por animal por dia. Todos os animais receberam a mesma dieta, constituída de 65% de silagem (50% de milho:50% de sorgo) e 35% de concentrado composto de milho (24,6%), farelo de algodão (7,4%), uréia (1,2%), sal mineralizado (0,54%) e calcário (0,86%). Esta dieta apresentava 12,4% de PB; 10,1 MJEM/kg MS e 41,1% de FDN. A adição de enzima mais levedura não alterou o consumo de MS (3,31% do PV ou 126,6 g/kg PV0,75), e CDA da MS (63,0%), PB (68,2%), EE (83,3%), CHOT (61,3%), FDN (47,2%), FDA (43,8%) e valor de NDT (62,8%). O GMD e o CMS diminuíram de forma quadrática e a CA alimentar piorou linearmente, em função dos dias de confinamento. O fornecimento de enzima mais levedura para bovinos de corte não traz benefícios nutricionais ou de desempenho.

Synthesis of PID controllers for a class of time delay systems

In this paper we use the Hermite-Biehler theorem to establish results on the design of proportional plus integral plus derivative (PID) controllers for a class of time delay systems. Using the property of interlacing at high frequencies of the class of systems considered and linear programming we obtain the set of all stabilizing PID controllers. As far as we know, previous results on the synthesis of PID controllers rely on the solution of transcendental equations. This paper also extends previous results on the synthesis of proportional controllers for a class of delay systems of retarded type to a larger class of delay systems. (C) 2009 Elsevier Ltd. All rights reserved.

Variability of physicochemical properties of an epoxy resin sealer taken from different parts of the same tube

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de Diferentes Níveis de bicarbonato de sódio sobre a degradação in situ do bagaço de cana-de-açucar auto-hidrolisado

The objective of this work was to evaluate the buffering effects, using sodium bicarbonate (NaHCO3) at the levels: 0; 0.7; 1.4; and 2.1% of dry matter, on the in situ degradation of autohidrolised sugar-cane bagasse. A diet was used with 60% autohidrolised sugar bagasse (AHB) and 40% of concentrate, plus urea, minerals and limestone. The rations was calculated to allow 300g of daily gain. After 20 days adaptation to the treatment (level of NaHCO3), 5 g of AWE was incubated on rumen of four bovines for 3, 6, 12, 24 and 48 hours, using naylon bag measuring 7,5 x 17,5 cm with pores of 36 micras. It was used a randomized blocks design with four treatments (NaHCO3) and four replications(animals). For the calculations of the protein degradation, it was considered the soluble fraction in water plus the degraded fraction in the same proportion as for the neutral detergent fiber (NDF). It was observed that the buffer did not affect the degradability in situ of AHB, whose averages in 48 hours of incubation for dry matter, organic matter, crude protein and neutral detergente fiber (NDF) were 34.83; 36.90; 55.40; and 25.56%, respectively.

Effects on mother and fetus of epidural and combined spinal-epidural techniques for labor analgesia

OBJETIVO: A peridural (AP) e a técnica de duplo bloqueio (DB) são utilizadas em analgesia para o trabalho de parto. Este estudo comparou os efeitos na mãe e no feto de ambas as técnicas em analgesia e anestesia para o parto. MÉTODOS: Quarenta parturientes ASA I e II receberam por via peridural 15 ml de ropivacaína a 0,125% (grupo AP) e 5 µg de sufentanil com 2,5 mg bupivacaína por via subaracnóidea (grupo DB). Foram avaliados: intensidade de dor, altura do bloqueio sensitivo, tempo de latência, bloqueio motor, duração da analgesia de parto, tempo para a resolução do parto, hipotensão materna e presença de prurido. Os recém-nascidos foram avaliados pelo índice de Apgar e escore da capacidade adaptativa e neurológica (ECAN), método de Amiel-Tison. RESULTADOS: Não houve diferenças significativas entre os grupos na intensidade da dor, no tempo de latência, no nível do bloqueio sensitivo e no índice de Apgar. O bloqueio motor, a duração da analgesia e o tempo para resolução do parto foram maiores no grupo DB, do qual sete parturientes apresentaram prurido leve. ECAN foi maior no grupo AP após meia hora, duas horas e 24 horas. Noventa e cinco por cento dos recém-nascidos do grupo AP e 60% do grupo DB foram considerados neurologicamente vigorosos ao exame de 24 horas. CONCLUSÃO: As duas técnicas mostraram-se eficazes para analgesia do trabalho de parto. As parturientes do grupo DB apresentaram prurido e trabalho de parto mais prolongado. Recém-nascidos de mães que receberam analgesia de parto via peridural apresentaram melhor ECAN.

Nutritional and chemical composition of culinary-medicinal Royal Sun Agaricus (the Himematsutake mushroom) Agaricus brasiliensis S. Wasser et al. (agaricomycetideae)

The objective of the study was to determine the nutritional and chemical composition (carbohydrates, proteins, lipids, calcium, and iron), water and ash content, and the caloric value of powdered fruiting bodies from six strains and from a mixture of strains of the culinary-medicinal mushroom Agaricus brasiliensis. The Kruskal-Wallis nonparametric and multiple comparisons tests and the Pearson correlation coefficient were used, with a 5% significance level. First, the results showed that strain 99/30 had a similar nutritional composition to the mixed sample. Second, when comparing strain nutrients to the mixture nutrients, the highest levels of carbohydrates, proteins, and calcium were in strain 99/25, and the highest levels of lipids were in strains 97/11, 99/28, and 99/30. Strain 99/30 was highest both in caloric value and moisture content. Finally, the mixture was established as a good source of macronutrients and micronutrients, and strain 99/30 was the closest to the mixture in nutritional composition.

Intraspecific Variation of Biological Activities in Venoms from Wild and Captive Bothrops jararaca

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The importance of knowing the home conditions of patients receiving long-term oxygen therapy

Purpose: Long-term oxygen therapy (LTOT) is one of the main treatments for patients with chronic obstructive pulmonary disease. Patients receiving LTOT may have less than optimal home conditions and this may interfere with treatment. The objective of this study was, through home visits, to identify the characteristics of patients receiving LTOT and to develop knowledge regarding the home environments of these patients.Methods: Ninety-seven patients with a mean age of 69 plus or minus 10.5 years were evaluated. This study was a cross-sectional descriptive analysis. Data were collected during an initial home visit, using a questionnaire standardized for the study. The results were analyzed retrospectively.Results: Seventy-five percent of the patients had chronic obstructive pulmonary disease, and 11% were active smokers. The patients' mean pulse oximetry values were 85.9% plus or minus 4.7% on room air and 92% plus or minus 3.9% on the prescribed flow of oxygen. Most of the patients did not use the treatment as prescribed and most used a humidifier. The extension hose had a mean length of 5 plus or minus 3.9 m (range, 1.5-16 m). In the year prior to the visit, 26% of the patients received emergency medical care because of respiratory problems. Few patients reported engaging in leisure activities.Conclusion: The home visit allowed us to identify problems and interventions that could improve the way LTOT is used. The most common interventions related to smoking cessation, concentrator maintenance and cleaning, use of a humidifier, and adjustments of the length of the connector hose. Therefore, the home visit is a very important tool in providing comprehensive care to patients receiving LTOT, especially those who show lack of adequate progress and those who show uncertainty about the treatment method.

Absence of chemopreventive influence of propolis on the rat liver altered foci development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Different Fluoride Concentrations of Experimental Dentifrices on Enamel Erosion and Abrasion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative analysis of root surface smear layer removal by different etching modalities or erbium:yttrium-aluminum-garnet laser irradiation. A scanning electron microscopy study

The purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet (Er:YAG) laser (2.94 mu m) irradiation on the removal of root surface smear layer of extracted human teeth and to compare its efficacy with that of citric acid, ethylenediamine tetra-acetic acid (EDTA), or a gel containing a mixture of tetracycline hydrochloride (HCl) and citric acid, using scanning electron microscopy (SEM). Thirty human dentin specimens were randomly divided into six groups: G1 (control group), irrigated with 10 ml of physiologic saline solution; G2, conditioned with 24% citric acid gel; G3, conditioned with 24% EDTA gel; G4, conditioned with a 50% citric acid and tetracycline gel; G5, irradiated with Er:YAG laser (47 mJ/10 Hz/5.8 J/cm(2)/pulse); G6, irradiated with Er:YAG laser (83 mJ/10 Hz/10.3 J/cm(2)/pulse). Electron micrographs were obtained and analyzed according to a rating system. Statistical analysis was conducted with Kruskal-Wallis and Mann-Whitney tests (P < 0.05). G1 was statistically different from all the other groups; no statistically significant differences were observed between the Er:YAG laser groups and those undergoing the other treatment modalities. When the two Er:YAG laser groups were compared, the fluency of G6 was statistically more effective in smear layer removal than the one used in G5 (Mann-Whitney test, P < 0.01). Root surfaces irradiated by Er:YAG laser had more irregular contours than those treated by chemical agents. It can be concluded that all treatment modalities were effective in smear layer removal. The results of our study suggest that the Er:YAG laser can be safely used to condition diseased root surfaces effectively. Furthermore, the effect of Er:YAG laser irradiation on root surfaces should be evaluated in vivo so that its potential to enhance the healing of periodontal tissues can be assessed.

Influence of Different Ceramics on Resin Cement Knoop Hardness Number

This study evaluated: 1) the effect of different ceramics on light attenuation that could affect microhardness, measured as the Knoop Hardness Number (KHN), of a resin cement immediately and 24 hours after polymerization and 2) the effect of different activation modes (direct light-activation, light activation through ceramics and chemical activation) on the KHN of a resin cement.Resin cement Rely X ARC (3M ESPE) specimens 5.0 mm in diameter and 1.0 nun thick were made in a Teflon mold covered with a polyester film. The cement was directly light activated for 40 seconds with an XL 2500 curing unit (3M ESPE) with 650 mW/cm(2), light activated through ceramic discs of Duceram Plus (DeguDent), Cergogold (DeguDent), IPS Empress (Ivoclar), IPS Empress 2 (Ivoclar), Procera. (NobelBiocare), In Ceram Alumina (Vita) and Cercon (DeguDent), having a 1.2 mm thickness or chemically activated without light application. The resin cement specimens were flattened, and KHN was obtained using an HMV 2 microhardness tester (Shimadzu) with a load of 50 g applied for 15 seconds 100 pin from the irradiated surface immediately and after storage at 37 degrees C for 24 hours. Ten measurements were made for each specimen, with three specimens for each group at each time. The data were submitted to ANOVA and Tukey's test (p=0.05). The KHN of the resin cement was not only affected by the mode of activation, but also by the post-activation testing time. The mean KHN of the resin cement for chemical activation and through all ceramics showed statistically significant lower values compared to direct activation immediately and at 24 hours. The KHN for 24 hours post-activation was always superior to the immediate post-activation test except with direct activation. The most opaque ceramics resulted in the lowest KHN values.

Care and Cleaning of Maxillofacial Prostheses

Both the cleaning and care of the prosthesis are fundamental for maintaining its quality. Therefore, the aim of this study was to show the methods of cleaning and care the patient needs to take as regards the prosthesis and adjacent tissue, starting with correct instruction and training by the professional. It has been verified that among the materials for fabricating maxillofacial prostheses, silicone was considered the major retainer of microorganisms on its surface. Therefore, for cleaning prostheses, the use of water and neutral soap, as well as chlorhexidine, is recommended. As regards care of the adjacent tissues, it is recommended to remove the prosthesis before going to sleep, in addition to washing the prosthesis receptor tissues with water and neutral soap or with a mixture of hydrogen peroxide and water. Whereas for the mucosal surfaces of the ophthalmic cavity, cleaning with filtered and boiled water or physiological solution at least 3 times a day is recommended.

12-Month color stability of enamel, dentine, and enamel-dentine samples after bleaching

The study aimed to quantify the color regression of enamel (E), dentine (D), and combined enamel-dentine (ED) of differently bleached ED specimens over a period of 12 months in vitro. Two ED samples were obtained from the labial surfaces of bovine teeth and prepared to a standardized thickness with the enamel and dentine layer each 1 mm. The ED samples were distributed on four groups (each n=80), in which the different bleaching products were applied on enamel (1, Whitestrips; 2, Illumine 15%; 3, Opalescence Xtra Boost) or dentine surfaces (4, mixture of sodium perborate/distilled water). Eighty ED samples were not bleached (control). Color (L*a*b*) of ED was assessed at baseline, subsequently after bleaching and at 3, 6, and 12 months of storage after bleaching (each 20 samples/group). E and D samples were prepared by removing the dentine or enamel layer of ED samples to allow for separate color analysis. Bleaching resulted in a significant color change (Delta E) of ED specimens. Within the observation period, Delta L but not Delta b declined to baseline. L* values of E and D samples also declined and were not significantly different from control samples after 12 months, while b* values did not decrease to baseline. Generally, no differences between the bleaching agents could be observed. Color change of enamel, dentine, and combined ED of in vitro bleached tooth samples is not stable over time with regard to lightness. However, yellowness did not return to baseline within 1 year.