Aproveitamento de resíduos.

2009

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Inclusão de farinha de resíduos da indústria de filetagem de tilápias na alimentação de girinos de rã-touro (Rana Catesbeiana Shaw,1802)

The objective of this experiment was to evaluate the inclusion of meal of tilapia industrial waster in bullfrog tadpoles' diets (Rana Catesbeina Shaw, 1802). Two hundred fifty tadpoles with initial weight and length of 0,18 +/- 0,05g and 2,50 +/- 0,18 centimeters were used, respectively, they were used and distributed in 25 aquariums of 30 liter each in a complete randomized design with five treatments and five repetitions. The tadpoles were fed four times a day with diets containing 0, 5, 10 and 15% of inclusion of tilapia filleting and another diet with 0% of supplemented tilapia filleting with synthetic methionine, being supplied four times a day at ease. The experiment period was 30 days. The diets with tilapia filleting inclusion and methionine supplementation did not have influence in the final weight and length averages, feed survival and conversion of bullfrog tadpoles. It cam be used until 15% of tilapia filleting inclusion in the bullfrog tadpoles food. The synthetic methionine supplementation in diets for bullfrog tadpoles is not necessary in diets with levels over 0,471/4 of the total methionine.

Gerenciamento e tratamento de resíduos químicos dos laboratórios da Embrapa Pecuária Sudeste.

2006

Diagnostico preliminar para gerenciamento de resíduos comuns na Embrapa Clima Temperado.

2016

Comportamento mecânico de um agregado reciclado a partir de resíduos de construção e demolição submetido a carregamentos cíclicos

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Programa de Pós-Graduação em Geotecnia, 2016.

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Avaliação térmica dos resíduos da destilação atmosférica das blendas - biodiesel/diesel

The worldwide concern regarding the use of sustainable energy and preserving the environment are determining factors in the search for resources and alternative sources of energy and therefore fuel less aggressive nature. In response to these difficulties Biodiesel has emerged as a good solution because it is produced from renewable sources, produces burns cleaner and is easily reproducible. This work was synthesized with biodiesel oil, sunflower via homogeneous catalysis in the presence of KOH, with and without the use of BHT and subsequently added to the blends BX (a proportion of biodiesel X = 5, 10, 15 and 20 %). Atmospheric distillation of the analysis, performed in blends with and without BHT were collected residue generated by each sample and performed a study heat from the thermogravimetric analysis at a heating rate of 10 °C*min-1, nitrogen atmosphere and heating to 600 °C. According to the specifications of Resolution N 7/2008 for biodiesel, it was found that the synthesized material was in accordance with the specifications. For blends showed that the samples are in accordance with the Resolution of ANP N 42/2009. From the TG / DTG curves of the samples of biodiesel, blends and waste can be seen that these show a single loss of thermal decomposition concerning constituents present in each sample. The blends without BHT with ratios of 5%, 10% and 15% biodiesel showed a lower amount of waste (1,07%; 1,09% e 1,10%) to mineral diesel (1,15%). Therefore, it is concluded that the addition of biodiesel with diesel mineral can improve some physico-chemical parameters, but also, depending on the added amount, decreasing the amount of waste generated. This fact is of great importance because the carbonaceous residue can cause problems in mechanical equipment and parts for vehicles, causing more frequent maintenance, and this is not desirable

Educação ambiental na alfabetização de trabalhadores de cooperativas de resíduos sólidos : por um resgate de elos submersos

Tese (doutorado)—Universidade de Brasília, Faculdade de Educação, Programa de Pós-Graduação em Educação, 2016.

Estudo térmico dos resíduos gerados da destilação atmosférica das misturas diesel/biodiesel de dendê

The growing world demand for energy supplied by fossil fuels, a major contributor to the emission of pollutants into the atmosphere and causing environmental problems, has been encouraging governments and international organizations to reflect and encourage the use of alternative renewable sources. Among these new possibilities deserves attention biodiesel, fuel cleaner and easy to reproduce. The study of new technologies involving that source is necessary. From this context, the paper aims at analyzing the thermal stability by thermogravimetric analysis, of the waste generated from atmospheric distillation of mixtures with ratios of 5, 10, 15 and 20% palm biodiesel in diesel with and without addition of BHT antioxidant. It was synthesized biodiesel through palm oil, via homogeneous catalysis in the presence of KOH, with and without the use of BHT and subsequently added to the diesel common indoor type (S1800) from a gas station BR. The diesel was already added with 5% biodiesel, and thus the proportions used for these blends were subtracted from the existing ratio in diesel fuel, resulting in the following proportions palm oil biodiesel: 0% (B5), 5% (B10), 10 % (B15) and 15% (B20). From atmospheric distillation analysis, performed in mixtures with and without BHT were collected residue generated by each sample and performed a thermal study from the thermogravimetric analysis at a heating rate of 10 °C.min-1, nitrogen atmosphere and heating to 600 ° C. According to the specifications of Resolution No. 7/2008 for biodiesel, it was found that the material was synthesized in accordance with the specifications. For mixtures, it was noted that the samples were in accordance with the ANP Resolution No. 42/2009. Given the TG / DTG curves of the samples of waste mixtures with and without BHT antioxidant was able to observe that they showed a single stage of thermal decomposition attributed to decomposition of heavy hydrocarbons and esters and other heavier constituents of the waste sample weighed. The thermal behavior of residues from atmospheric distillation of mixtures of diesel / biodiesel is very important to understand how this affects the proper functioning of the engine. A large amount of waste can generate a high content of particulate material, coke formation and carbonaceous deposits in engine valves, compromising their performance

Uso de resíduos da indústria de papel e celulose em plantios florestais: aspectos técnicos e legais.

Introdução; Principais resíduos sólidos e semi-sólidos gerados em complexos integrados de celulose e papel; Aspectos técnicos e legais voltados à elaboração de projeto agronômico para uso de resíduos em plantios florestais; Caracterização e classificação dos resíduos quanto aos seus riscos potenciais ao meio ambiente e à saúde pública; Caracterização de resíduos sob o aspecto agronômico; Critérios para definição de doses, épocas e formas de aplicação; Avaliação de problemas de ordem ambiental; Avaliação da viabilidade econômica; Seleção e caracterização das áreas de aplicação; Monitoramento agronômico e ambiental da área de aplicação; Manuseio, transporte e armazenamento; Processos adicionais de tratamento.

Adubação de capim-elefante com composto orgânico produzido com resíduos animais.

Resumo: A utilização do composto orgânico proveniente de resíduos da criação e abate de pequenos ruminantes pode elevar a produção de matéria seca do capim-elefante, tendo em vista o teor de nutrientes contidos nesse fertilizante orgânico, diminuindo os impactos da produção animal sobre o ambiente e reduzindo os custos de produção na área de capineira de capim-elefante. Dada à escassez de informações na literatura e a importância do manejo adequado da adubação orgânica na agropecuária, objetivou-se avaliar os atributos químicos e físicos do solo, o estado nutricional e a produção do capim-elefante submetido à aplicação de doses do composto orgânico proveniente de resíduos da produção e abate de pequenos ruminantes. O delineamento experimental adotado foi em parcelas subdivididas, com medidas repetidas no tempo, sendo as parcelas as doses (0; 13,3; 26,6; 39,9; 52,3; 79,8 t ha-1 ) de composto orgânico e um tratamento adicional com adubos minerais e as subparcelas os ciclos (1, 2, 3 e 4) com 4 blocos, totalizando 28 parcelas. As variáveis mensuradas foram atributos físicos e químicos do solo, a diagnose foliar e a produtividade de capim-elefante. Para o fator ciclo, a adubação orgânica incrementou a umidade gravimétrica e umidade volumétrica e ainda houve diminuição da densidade de partículas em função dos ciclos. Com as doses do fertilizante orgânico houve aumento nas concentrações da matéria orgânica, amônio, nitrato, amônio + nitrato, fósforo e saturação por base; houve redução do valor da acidez potencial, além da elevação dos teores de nitrogênio e fósforo nas plantas. As doses de composto orgânico aumentaram a biomassa de forragem total de capim elefante. A adubação mineral proporcionou maior incremento da produção do capim em relação à adubação orgânica no decorrer dos ciclos. Abstract: The use of organic compost from residues of production and slaughter of small ruminants can increase dry matter production of elephant grass, in due function of quantity nutrients in this compost, thus reducing the animal production impacts in the environment and production costs in elephant grass fields. Due to the Lack of information in literature and the importance regarding organic fertilization in agriculture, the aim of this work was evaluate chemical and physical soil attributes, nutritional status in plants and production of elephant grass in function of doses of organic compound of residues of production and slaughter of small ruminants. The experimental design was in split-plot, with the main treatment the doses (0; 13,3; 26,6; 39,9; 52,3; 79,8 t ha-1 ) of organic compost and one additional treatment with mineral fertilization and secondary treatments was the cycles (1, 2, 3 and 4) with 4 blocks, and 28 plots. The measured variables were physical and chemical attributes in the soil, nutritional diagnosis in plants and production of elephant grass. For cycle factor the organic fertilization increased gravimetric and volumetric humidity, yet, occurred decrease of density in function of cycles. With the doses of organic compost increased organic matter, ammonium, nitrate, ammonium + nitrate, phosphor and base saturation; and decreased the value of potential acidity; and increased content of N and P in plants. The doses of organic compost increased the elephant grass production. The mineral fertilization increased the elephant grass production in relation of organic fertilization over the cycles.

Farinha de resíduos da indústria de filetagem de tilápias como fonte de proteína e minerais para alevinos de tilápia-do-nilo (Oreochromis niloticus)

Neste trabalho, objetivou-se avaliar a utilização da farinha de resíduos da indústria de filetagem de tilápias (FR) como fonte de proteína e de minerais em rações práticas na alimentação de alevinos de tilápia do Nilo. Foram utilizados 120 alevinos de tilápias do Nilo com peso e comprimento iniciais de 0,58 ± 0,05 g e 3,49 ± 0,09 cm, respectivamente, distribuídos em 24 aquários com capacidade para 30 L, em um delineamento inteiramente casualisado, com quatro tratamentos e seis repetições. Os peixes foram alimentados com rações contendo 30% de proteína digestível e 3.000 kcal de energia digestível/kg, de acordo com os seguintes tratamentos: CO - ração à base de milho e farelo de soja, sem suplementação de fósforo; FB - ração à base de milho e farelo de soja, com fosfato bicálcico; FB + FR - ração à base de milho e farelo de soja, suplementada com fosfato bicálcico (50%) e farinha de resíduos (50%); FT - ração à base de milho e farelo de soja, suplementada com farinha de resíduos. Ao final do experimento, os melhores resultados de desempenho foram observados nos animais que receberam suplementação de P. Quanto às características de carcaça, os animais que receberam a ração CO apresentaram maior teor de gordura corporal e menores teores de cinzas, Ca e P. A FR pode ser utilizada em rações para alevinos de tilápia do Nilo como fonte de P, sem prejuízos no desempenho e na composição corporal.

Resíduos agroflorestais e industriais para produção de lenha ecológica são alternativas de sustentabilidade e renda.

2015

Supressividade a Cylindrocladium spathipthylli de espatifilo (Spathiphyllum wallisi) induzida por resíduos marinhos.

2009