Serum procalcitonin, interleukin-6, soluble intercellular adhesin molecule-1 and IgG to short-chain exocellular lipoteichoic acid as predictors of infection in total joint prosthesis revision

The diagnosis of prosthetic joint infection and its differentiation from aseptic loosening remains problematic. The definitive laboratory diagnostic test is the recovery of identical infectious agents from multiple intraoperative tissue samples; however, interpretation of positive cultures is often complex as infection is frequently associated with low numbers of commensal microorganisms, in particular the coagulase-negative staphylococci (CNS). In this investigation, the value of serum procalcitonin (PCT), interleukin-6 (IL-6) and soluble intercellular adhesion molecule-1 (sICAM-1) as predictors of infection in revision hip replacement surgery is assessed. Furthermore, the diagnostic value of serum IgG to short-chain exocellular lipoteichoic acid (sce-LTA) is assessed in patients with infection due to CNS. Presurgical levels of conventional serum markers of infection including C-reactive protein (CRP), erythrocyte sedimentation rate (ESR) and white blood cell count (WBC) is also established. Forty-six patients undergoing revision hip surgery were recruited with a presumptive clinical diagnosis of either septic (16 patients) or aseptic loosening (30 patients). The diagnosis was confirmed microbiologically and levels of serum markers were determined. Serum levels of IL-6 and sICAM-1 were significantly raised in patients with septic loosening (P=0.001 and P=0.0002, respectively). Serum IgG to sce-LTA was elevated in three out of four patients with infection due to CNS. In contrast, PCT was not found to be of value in differentiating septic and aseptic loosening. Furthermore, CRP, ESR and WBC were significantly higher (P=0.0001, P=0.0001 and P=0.003, respectively) in patients with septic loosening. Serum levels of IL-6, sICAM-1 and IgG to sce-LTA may provide additional information to facilitate the diagnosis of prosthetic joint infection.

Transcriptome Analysis Reveals New Insights into the Modulation of Endometrial Stromal Cell Receptive Phenotype by Embryo-Derived Signals Interleukin-1 and Human Chorionic Gonadotropin: Possible Involvement in Early Embryo Implantation

The presence of the conceptus in uterine cavity necessitates an elaborate network of interactions between the implanting embryo and a receptive endometrial tissue. We believe that embryo-derived signals play an important role in the remodeling and the extension of endometrial receptivity period. Our previous studies provided original evidence that human Chorionic Gonadotropin (hCG) modulates and potentiates endometrial epithelial as well as stromal cell responsiveness to interleukin 1 (IL1), one of the earliest embryonic signals, which may represent a novel pathway by which the embryo favors its own implantation and growth within the maternal endometrial host. The present study was designed to gain a broader understanding of hCG impact on the modulation of endometrial cell receptivity, and in particular, cell responsiveness to IL1 and the acquisition of growth-promoting phenotype capable of receiving, sustaining, and promoting early and crucial steps of embryonic development. Our results showed significant changes in the expression of genes involved in cell proliferation, immune modulation, tissue remodeling, apoptotic and angiogenic processes. This points to a relevant impact of these embryonic signals on the receptivity of the maternal endometrium, its adaptation to the implanting embryo and the creation of an environment that is favorable for the implantation and the growth of this latter within a new and likely hostile host tissue. Interestingly our data further identified a complex interaction between IL1 and hCG, which, despite a synergistic action on several significant endometrial target genes, may encompass a tight control of endogenous IL1 and extends to other IL1 family members.

In-Vivo Corrosion and Fretting of Modular TI-6AL-4V/CO-CR-MO Hip Prostheses: The Influence of Microstructure and Design Parameters

The purpose of this study was to evaluate the incidence of corrosion and fretting in 48 retrieved titanium-6aluminum-4vanadium and/or cobalt-chromium-molybdenum modular total hip prosthesis with respect to alloy material microstructure and design parameters. The results revealed vastly different performance results for the wide array of microstructures examined. Severe corrosion/fretting was seen in 100% of as-cast, 24% of low carbon wrought, 9% of high carbon wrought and 5% of solution heat treated cobalt-chrome. Severe corrosion/fretting was observed in 60% of Ti-6Al-4V components. Design features which allow for fluid entry and stagnation, amplification of contact pressure and/or increased micromotion were also shown to play a role. 75% of prosthesis with high femoral head-trunnion offset exhibited poor performance compared to 15% with a low offset. Large femoral heads (>32mm) did not exhibit poor corrosion or fretting. Implantation time was not sufficient to cause poor performance; 54% of prosthesis with greater than 10 years in-vivo demonstrated none or mild corrosion/fretting.

Development of an instrumented customizable total knee prosthesis for experimental tests.

Total knee arthroplasty (TKA) has revolutionized the life of millions of patients and it is the most efficient treatment in cases of osteoarthritis. The increase in life expectancy has lowered the average age of the patient, which requires a more enduring and performing prosthesis. To improve the design of implants and satisfying the patient's needs, a deep understanding of the knee Biomechanics is needed. To overcome the uncertainties of numerical models, recently instrumented knee prostheses are spreading. The aim of the thesis was to design and manifacture a new prototype of instrumented implant, able to measure kinetics and kinematics (in terms of medial and lateral forces and patellofemoral forces) of different interchangeable designs of prosthesis during experiments tests within a research laboratory, on robotic knee simulator. Unlike previous prototypes it was not aimed for industrial applications, but purely focusing on research. After a careful study of the literature, and a preliminary analytic study, the device was created modifying the structure of a commercial prosthesis and transforming it in a load cell. For monitoring the kinematics of the femoral component a three-layers, piezoelettric position sensor was manifactured using a Velostat foil. This sensor has responded well to pilot test. Once completed, such device can be used to validate existing numerical models of the knee and of TKA and create new ones, more accurate.It can lead to refinement of surgical techniques, to enhancement of prosthetic designs and, once validated, and if properly modified, it can be used also intraoperatively.

Designing for Safety : Implications of a Fifteen Year Review of Swallowed and Aspirated Dentures

Peer reviewed

Implantation de la téléréadaptation : exploration de la perspective de l’utilisateur

Travail présenté à Dahlia Kairy Dans le cadre du cours PHT-6123 Travail d’intégration

L'implantation du programme intégré scolarisation/réadaptation sur le site de Boscoville₂₀₀₀ : effort de documentation

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Développement, caractérisation et évaluation in vivo par implantation périvasculaire de microparticules pour inhiber l'hyperplasie néo-intimale des carotides de rat

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

SecAdvise - un aviseur de mécanismes de sécurité : implantation, validation et expérimentation du modèle proposé

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

L'évaluation de l'implantation de la politique du recouvrement des coûts des actes de santé en Côte d'Ivoire

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Implantation dans plusieurs sites d'un programme de réadaptation cognitive pour les personnes atteintes de schizophrénie : aspects cliniques et organisationnels

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Can aberrometry provide rapid and reliable measures of subjective depth of focus following multifocal intraocular lens implantation?

Purpose: To determine whether the ‘through-focus’ aberrations of a multifocal and accommodative intraocular lens (IOL) implanted patient can be used to provide rapid and reliable measures of their subjective range of clear vision. Methods: Eyes that had been implanted with a concentric (n = 8), segmented (n = 10) or accommodating (n = 6) intraocular lenses (mean age 62.9 ± 8.9 years; range 46-79 years) for over a year underwent simultaneous monocular subjective (electronic logMAR test chart at 4m with letters randomised between presentations) and objective (Aston open-field aberrometer) defocus curve testing for levels of defocus between +1.50 to -5.00DS in -0.50DS steps, in a randomised order. Pupil size and ocular aberration (a combination of the patient’s and the defocus inducing lens aberrations) at each level of blur was measured by the aberrometer. Visual acuity was measured subjectively at each level of defocus to determine the traditional defocus curve. Objective acuity was predicted using image quality metrics. Results: The range of clear focus differed between the three IOL types (F=15.506, P=0.001) as well as between subjective and objective defocus curves (F=6.685, p=0.049). There was no statistically significant difference between subjective and objective defocus curves in the segmented or concentric ring MIOL group (P>0.05). However a difference was found between the two measures and the accommodating IOL group (P<0.001). Mean Delta logMAR (predicted minus measured logMAR) across all target vergences was -0.06 ± 0.19 logMAR. Predicted logMAR defocus curves for the multifocal IOLs did not show a near vision addition peak, unlike the subjective measurement of visual acuity. However, there was a strong positive correlation between measured and predicted logMAR for all three IOLs (Pearson’s correlation: P<0.001). Conclusions: Current subjective procedures are lengthy and do not enable important additional measures such as defocus curves under differently luminance or contrast levels to be assessed, which may limit our understanding of MIOL performance in real-world conditions. In general objective aberrometry measures correlated well with the subjective assessment indicating the relative robustness of this technique in evaluating post-operative success with segmented and concentric ring MIOL.

A smart surgical robotic for cochlear implantation

In this paper a surgical robotic device for cochlear implantation surgery is described that is able to discriminate tissue interfaces and other controlling parameters ahead of a drill tip. The advantage in surgery is that tissues at interfaces can be preserved. The smart tool is able to control interaction with respect to the flexing tissue to avoid penetration control the extent of protrusion with respect to the real-time position of the tissue. To interpret drilling conditions, and conditions leading up to breakthrough at a tissue interface, the sensing scheme used enables discrimination between the variety of conditions posed in the drilling environment. The result is a robust fully autonomous system able to respond to tissue type, behaviour and deflection in real-time. The paper describes the robotic tool that has been designed to be used in the surgical environment where it has been used in the operating room.

Facteurs susceptibles d’influencer l'implantation de l'Échelle québécoise des niveaux de compétence en français des personnes immigrantes adultes et du Programme-cadre de français pour les personnes immigrantes adultes au Québec

La coexistence des services de francisation au Québec pour les personnes immigrantes adultes a fait l'objet de divers enjeux liés notamment au passage des apprenants d'un lieu de formation à un autre (Québec, MICC, 2011a). Dans le but de répondre à ces enjeux et d’harmoniser l'offre de services gouvernementaux en matière de francisation des adultes, le ministère de l'Immigration et des Communautés culturelles (MICC) a élaboré en collaboration avec le ministère de l'Éducation, du Loisir et du Sport (MELS), une innovation pédagogique, soit un référentiel commun québécois composé de deux instruments : l’Échelle québécoise des niveaux de compétence en français des personnes immigrantes adultes et le Programme-cadre de français pour les personnes immigrantes adultes au Québec. Le but de notre étude était de mieux comprendre l'implantation du référentiel commun québécois, de faire état des représentations du personnel enseignant en francisation vis-à-vis de cette innovation pédagogique et d’identifier les principaux facteurs qui structurent son implantation. Pour atteindre ces objectifs de recherche, nous avons mené une étude qualitative dans laquelle nous nous sommes appuyée sur le modèle d'implantation de Vince-Whitman (2009) qui identifie douze facteurs facilitant l’implantation d’une politique et d’une pratique. Nous avons accédé aux représentations de douze enseignantes et enseignants en francisation qui œuvrent au MICC et au MELS lors d’entretiens de groupe en leur permettant de s'exprimer sur leurs pratiques pédagogiques et sur leurs impressions du référentiel commun québécois. À l’aide du logiciel QSF NVivo 8, nous avons analysé le contenu des propos de nos participants de recherche. Nos résultats démontrent que le manque appréhendé de ressources – humaines, matérielles et financières, et un manque de temps, de formation et de collaboration professionnelle pourraient représenter des obstacles et nuire à une éventuelle implantation du référentiel commun québécois. À la lumière de ces résultats, nous proposons un cadre de référence composé de sept facteurs d’implantation d’une innovation pédagogique afin de mieux rendre compte d’une réalité spécifique et contemporaine, celle de l'implantation du référentiel commun québécois pour la francisation des immigrants adultes scolarisés. Les écrits scientifiques et nos résultats de recherche démontrent que de diverses formes de soutien, principalement du matériel pédagogique approprié et suffisant, peuvent constituer un facteur-clé dans la réussite de l’implantation d’une innovation pédagogique.