Compatibilidade entre produtos químicos e biológicos à base de Bacillus thuringiensis Berliner no controle de Tuta absoluta (Meyrick) (Lepidoptera: Gelechiidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Análise do comportamento térmico de paredes de madeira

This study consists in the observation and evaluation of the thermal behavior and distribution of wood composite walls, MDF – Medium Density Fiberboard, HDF – High Density Fiberboard, OSB – Oriented Strand Board and EGP – Edge Glued Panel. This study had the objective to present the experimental thermal behavior and to verify which one fit the thermal comfort standards for human labor For this work, was developed a thermal chamber, with one interchangeable side, so the wall prototypes would fit for each experiment. We studied walls made of MDF, HDF, OSB and EGP, which one had its own distinct behavior due to the panel construction. The EGP wall had shown the most reliable material for this usage at high temperatures. With this work, it was demonstrated the importance of choice for the right material and construction method for wooden composite walls, because if they were scaled poorly, the people exposed to them would be uncomfortable by the proportionate environment, and the costs for a resizing would be too high

Desenvolvimento de metodologia para a obtenção da cubicagem de madeira em toras empilhadas através de imagens digitais

Obtaining accurate estimates of the volume of stacked wood is important in view of the increasing value of wood as raw material. Therefore, the forest companies have become increasingly concerned about the methods currently used to convert cubic meters for stereo. In this context, emerged the need of optimizing the measurement process and accuracy of the volume of stacked wood. For this, companies have been testing methods with greater efficiency, speed and low operating cost. Existing methods made through approximate equations, and also by determining the conversion factor, called the stacking factor (Fe), are questioned, due to errors and inaccuracies. The use of digital photographs is an alternative method that would minimize operator intervention, allowing greater control and speed the process, thus eliminating part of the imprecision of the traditional method. The use of the method is viable, due to present an error of about 10% while traditional methods showed an error of 17%

Estudo comparativo entre MDF e MDP utilizados na indústria moveleira

Increasingly, the furniture market is competitive. The construction industry presents itself in growth, mainly due to the lines of existing incentives and tax credits established by the government, assisting the impulse to purchase real estate, building materials and furniture. Factors that promote and strengthen the sector's growth. With high demand from the furniture market, demand for higher quality and increasing technological advances, research is often undertaken in search of solutions for process improvement and product features, focusing on the production of materials less harmful to the environment, provision of raw press to lower cost, improve the production process and product development of cost-effective. This research focuses on the comparative study between two materials widely used in furniture manufacturing. MDF (Medium Density Fiberboard) and MDP (Medium Density Particleboard). The subject provides the focus in furniture production, presenting and comparing data collected from three companies producing panels between physical and mechanical characteristics of the materials, also presenting some of the main factors of influence on the quality of the panels, their features and applications on mobile. The study shows the high potential of using the MDP (Medium Density Particleboard) in furniture designs, as well as MDF (Medium Density Particleboard), favoring the final terms of the project , resulting in better utilization of each material , avoiding waste and increase unnecessary cost . Currently, several projects are developed in MDP and MDF furniture, where there is no relevance to their characteristics regarding their limitations. Many of these furnishings are designed without a specific study of the best use and positioning of each material, with better utilization , favoring collateral design , especially furniture designed exclusively for each environment . The lack of technical ...

Toxicidade de produtos naturais para operárias de Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae)

As formigas cortadeiras, pertencentes aos gêneros Atta e Acromyrmex, possuem esse nome pelo hábito que têm de cortar as folhas das plantas. Por este motivo, elas causam danos econômicos, principalmente em áreas de cultura agrícola. Para realizar o controle dessas pragas, existem inúmeros métodos; porém, os únicos que apresentam resultados satisfatórios são os que utilizam inseticidas tradicionais. O controle químico pode gerar efeitos maléficos ao ambiente, à fauna e à população humana. É por isso que há uma grande procura por métodos alternativos, utilizando produtos que tenham grande especificidade e sejam passíveis de rápida degradação, sendo, portanto, menos danosos ao ambiente. Uma destas alternativas é a utilização de produtos naturais presentes nos vegetais superiores, que podem constituir novas fontes de material com ação tóxica para estes insetos praga. Este trabalho teve por objetivo avaliar a toxicidade das plantas Magonia pubescens e Duguetia lanceolata para operárias de Atta sexdens rubropilosa. Para os testes, as formigas foram divididas em lotes de 50 operárias, distribuídas em 5 placas para cada tratamento e mantidas em B.O.D. durante os 25 dias do experimento. Nos bioensaios de ingestão, os extratos provenientes das plantas foram incorporados em dieta artificial e testados durante 25 dias. No bioensaio tópico, as substâncias eram colocadas no pronoto das formigas e era oferecida dieta pura em todos os dias do experimento. Após os testes, os dados foram transferidos para o software Prisma 3.0, para a confecção de curvas de sobrevivência e para a realização das análises estatísticas. Apesar de Magonia pubescens apresentar um bom resultado, não foi possível continuar com os testes, pois a alta polaridade dos extratos impossibilitava a separação das substâncias... (Resumo completo, clicar acesso eletrônico abaixo)

Estudo do Comportamento da Viscosidade de Sistemas de Carboximetilcelulose de Sódio e Diferentes Componentes nos produtos para industria alimentícia

Currently, the food market is a great competition. It is no longer unanimously in the CMC powder drinks, as in the past, xanthan gum, always seeking to develop more economic alternatives, such as guar gum. It is clear, therefore, it is of vital importance to understand thoroughly the operation of a particular product in different process conditions and with different materials so that we can develop and adapt both new processes and products to new market reality

Regulamentação e etapas da certificação de produtos orgânicos no Brasil

A busca por alimentos chamados popularmente de orgânicos, produzidos sem o uso de agrotóxicos, fertilizantes, insumos químicos ou organismos geneticamente modificados, vem se consolidando mundialmente. O crescimento do mercado mundial de produtos orgânicos criou uma demanda pela normatização, regulamentação e certificação da produção orgânica em diversos países. Por pressão de países importadores, houve a necessidade de que produtos orgânicos brasileiros fossem certificados através de normas e padrões de qualidade reconhecidos internacionalmente. Este trabalho tem como objetivo descrever a legislação brasileira referente à certificação de produtos orgânicos. Foram descritos os conteúdos das leis e normas que compõem o arcabouço legal referente ao tema. A regulamentação da agricultura orgânica no Brasil teve início com publicação da Lei 10.831/2003 e sua regulamentação pelo Decreto 6.323/2007, que estabeleceu a obrigatoriedade da certificação de produtos orgânicos por organismo de certificação reconhecido oficialmente. Todos aqueles que produzem, transportam, comercializam ou armazenam produtos orgânicos (exceto aqueles pertencentes à agricultura familiar) ficaram obrigados a regularizar suas atividades e estarem inseridos no Cadastro Nacional de Produtores Orgânicos

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Estudo de repelência com diversos produtos de origem natural em operárias de Apis mellifera em semi-campo

Accidents involving insects of the Hymenoptera order occur very often with both human beings and domestic pets and, in Brazil, they include aggravated cases with Africanized bees (Apis mellifera). The aggravation of deforestation and the lack of awareness regarding the subject are factors that contribute to the rise of the number of bees in the urban environment. This fact has been causing several derangements among the population because, once these insects are bothered, they become very aggressive. Considering the risks to population and the great amount of accidents that could be avoided, the development of researches with the goal of determining repelling substances is rather important. Therefore, this research evaluated the repelling action of essential natural oils obtained from rosemary (Rosmarinus oficinalis), lemongrass (Cymbopogon citratus), thyme (Thymus vulgaris), cedar (Juniperus virginiana), clove (Syzygium aromaticum) and mint (Mentha piperita) on A. mellifera Africanized worker bees in both semi-field and aggressiveness tests. Among the evaluated composites, the lemongrass, mint and clove essential natural oils presented a grater repelling effect, inhibiting the bees’ visitation to the managed feeders almost completely. The cedar essential natural oil was the least effective composite, and the rest of the tested oils presented satisfactory repellency, which became less effective over time, according to non-parametric Mann-Whitney test. However, further tests showed that only the lemongrass essential natural oil caused a less aggressive response from the bees, which can confirm the repelling power of this composite. This way, according to the results obtained through this research, lemongrass presents a greater potential to the development of effective repelling formulas against Africanized bees (Apis mellifera)

Estudo do potencial de associações de ZnO com os produtos naturais ácido cafeico e ferúlico como filtros solares híbridos: [recurso eletrônico]

In this work were studied associations of ZnO with the natural products caffeic and feluric acids. Two preparation methods were used, that is, the sol-gel and a reflux procedure. In the sol-gel method, ZnO is produced by the basics hydrolysis of precursors in the presence of the organic filters (caffeic and feluric acids), which results in 30 nm (or less) ZnO particles with the organic filters (in dissociated form) bonded to the surface of ZnO. In the reflux method, a dispersion of ZnO in a water/ethanol mixture was kept under reflux (50oC/4h) in the presence of the organic acids. The ZnO particles used in the reflux method have a higher diameter than sol-gel ZnO particles, but the prepared associated product ZnO/Organic acids were similar. Despite of the difference in relation to crystallinity between the products, the preparation methods resulted in analogous associations with respect to the interaction of the organic filters with the ZnO surface. The caffeic/ZnO associations presented low photostability, which lead to the degradation of the organic filter. The other associations (feluric acid/ZnO) presented satisfactory results. The FT-IR spectroscopy confirmed the formation of the association, and the nature of the bond formed compared with the Zn-O bond in Zn2+/Felutic acid complexes. The isolated organic and inorganic filters, along with the associations were analyzed by diffuse reflectance spectroscopy and Uv-vis spectroscopy. The absorption edges and the critical wavelengths were analyzed and the effects of Zn-O bonds in feluric acid/ZnO associations described as a function of the relative position of the π/π* system of the organic filter. Finally the performance of the hybrid filters were investigated in terms of the absorption of UVA and UVB radiations, with the UVA/UVB ratio, an efficiency parameter largely used in the description of solar filters, sunscreen and suncare products

Estudo da secagem natural e forçada das folhas de Corymbia Citriodora a partir da extração de óleos essenciais

Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield

Análise das propriedades da madeira de estrutura de telhado após a ocorrência de um incêndio

The present study evaluated the mechanical properties of pieces of wood coming from the roof structure of a residence subject fire in the rural area of Itapeva/SP. The structure was built 25 years ago using wooden beams of the species Guarucaia (Peltophorum vogelianum), where the specimens were removed. The research methodology included qualitative evaluation of the samples, estimating the layer pyrolysis and carbonization of the wood, measuring of density and mechanical tests of compression parallel to grain, tension parallel to grain and shear. The mechanical properties of wood were analytically correlated with the layers carbonization and pyrolysis that are influenced by the temperature and time of fire; these values were estimated at 1000 °C and two hours for the case in question. The results indicate that the strength properties of degraded wood are different from a healthy wood. The level of thermodegradation, in general, can be measured by density, result in weight loss due to decomposition of the wooden components.

Proposta para melhoria da qualidade dos produtos cerâmicos e de criação de um polo cerâmico artesanal na cidade de Indiana - SP

This work presents a proposal to create a Polo Ceramic Craft in the town of Indiana - SP, through the potter’s organization in a cooperative that will coordinate activities to add value to ceramic pieces. To achieve this, two things are essential: improving the ceramic body and improve the properties of the ceramic material. For the first action it’s necessary to create a Central Mass Production of Ceramics, to provide raw materials and homogeneous composition that results in differentiated ceramic after burning process (sintering). To this end, we propose the incorporation of additives (which act as fluxes) to the clay material. These additives can be mineral such as feldspar and nefelinas or leavings, such as glass powder obtained from disposable containers. For the second action is necessary to acquire an oven, electric or gas, it reaches higher temperatures (around 1200 ° C). The presence of the additive and burning at higher temperatures will enable better production of sintered ceramic material with less porosity and water absorption and higher mechanical strength, and pieces vitrified and glazed, allowing them to assign a higher value. For the production of these materials (thinner walls) requires a smaller volume of clayey raw materials. Besides benefiting the ceramic pieces, the proposed changes reduce the environmental impact caused by burning wood, since it will be replaced by natural gas (or electricity), and even will reduce the disposal of glass containers in the environment by recycling and incorporating this material in the clay. From a social standpoint, the cooperative is crucial to the viability of the proposed project, to coordinate activities and commercial production, which will result in better wages and profits for companies and consequently for the city and its population

Análise do gerenciamento de projetos de produtos na área de desenvolvimento de motores em uma indústria automotiva

L'un des facteurs nécessaires pour qu’une entreprise reste compétitive sur le marché est la création ou l'amélioration d'un produit afin qu’il réponde aux besoins et aux attentes des clients, ainsi, le Processus de Développement de Produits (PDP) est essentiel. Pour la réussite du PDP, il est souhaitable de suivre un système standard de gestion de projet. L'objectif de cette étude est d'analyser la gestion de projets dans le processus de développement de produits dans l'industrie automobile afin d'identifier les possibilités d’amélioration. Par conséquent, nous avons procédé à une revue de littérature sur le sujet, analysé les lignes directrices et les pratiques du processus de développement de produit dans l’entreprise. Comme résultat, il a été obtenu que le système de développement de produits créé par l’entreprise requiert la clarification des outils utiles à la gestion de projet. Un problème de communication et de gestion des coûts a également été constaté dans le domaine du développement du moteur lourd

Uma revisão sobre a resina uréia-formadeído (RUF) empregada na produção de painéis de madeira reconstituída

According to ABIPA (2009), Brazil is currently among the major producers of reconstituted wood panels, with one of the main factors for this condition, its climate and its large land area, which allows the cultivation of forests, which provide raw materials for these industries. To establish that market as power, Brazil has invested about R$ 1.3 billion in the last 10 years, yet designed an investment of 0.8 billion dollars over the next three years (BNDES, 2008). With the new investments in this segment, we expect a growth of about 66% in the resin consumption of urea-formaldehyde (GPC, 2009) which should also result in major investments by the companies producing this polymer. Currently employees are mainly three types of resins in the production industry panels, as follows: Urea-Formaldehyde Resin (R-UF), melamine-formaldehyde resin (R-MF) and Phenol-Formaldehyde Resin (R-FF). Especially the cost factor, the urea-formaldehyde resin is the most used by companies producing reconstituted wood panels. The UF-R is a polymer obtained by condensation of urea and formaldehyde reactors (usually batch type), characterized by being a thermosetting polymer which makes it very efficient for bonding wood composites. The urea-formaldehyde polymer, to present a quite complex, it becomes very difficult to predict the exact chain resulting in the process of condensation of urea with formaldehyde, so that a greater knowledge of its characteristics and methods for their characterization can result in greater control in industrial processes and subsequent decrease cost and improve the quality of reconstituted wood panels produced in Brazil