Estudo térmico de um sistema solar de aquecimento de água residencial para duas configurações de superfície absorvedora

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are its low cost and easy manufacturing and assembly. The absorbing surface of the collector is formed by an aluminum plate with eight flaps where they lodge PVC pipes. The catchment area of solar radiation corresponds to 1.3 meters. The collector box was made of wood, is covered by transparent glass and thermal insulation of tire chips and expanded polystyrene (EPS). Absorber tubes were connected in parallel through the use of PVC fittings and fixed to the plate by the use of metal poles and rivets. The entire absorber received paint flat black for better absorption of sunlight. The system worked on a thermosiphon assembly and absorber of the collector has been tested in two configurations: with the tubes facing up, directly exposed to the impact of sunlight and facing down, exchanging heat with the plate by conduction. It was determined the most efficient configuration for the correct purpose. The solar collector was connected to a thermal reservoir, also alternative, low-cost forming the system of solar water heating. We evaluated thermal parameters that proved the viability of the heating system studied

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging

Descontinuidade na seção transversal em laminados compósitos poliméricos: efeitos e propriedades

The growing demand in the use of composite materials necessitates a better understanding its behavior to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. It is know that most of the structural elements are designed with presence of geometric discontinuities (holes, notches, etc) in their longitudinal sections and / or transversals, and that these discontinuities affect the mechanical response of these elements. This work has aims to analyze a study of the mechanical response, when in the presence geometric discontinuity, of polymer matrix composite laminates (orthophthalic polyester) to the uniaxial tensile test. The geometric discontinuity is characterized by the presence of a center hole in the transversal section of the composite. In this study, different kinds of stacking sequences are tested, with and without the presence of the hole, so as to provide better understanding of the mechanical properties. This sense, two laminates were studied: the first is only reinforced by with seven layers short mats of fiberglass-E (CM) and the second where the reinforcement of fiberglass-E comes in the form of bidirectional fabric (CT), with only four layers. The laminate CT has the presence of anisotropy (sense of continuous fibers with respect to the applied load) as the main parameter influencing its mechanical behavior, behavior this, not observed for the CM. In addition to the mechanical properties was also studied the fracture characteristics developed in each composite laminated. The results also showed that the presence of the hole in the transversal section decreased the ultimate strength of laminates and changed the final characteristic of fracture in all kinds of composite laminated studied

Análise do desempenho térmico de um sistema de aquecimento solar de baixo custo

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are low cost and easy manufacturing and assembly. The system operates under natural convection or thermosiphon. The absorbing surface of the collector is formed by twelve PVC pipes of 25 mm outside diameter connected in parallel via connections in T of the same material. The tubes were covered with absorbing fins made with recycled aluminum cans. We studied eight settings between absorber plate, thermal insulating EPS boards and thermal reservoirs 150 and 200 liters. It was determined the most efficient configuration for the correct purpose. We evaluated thermal parameters that proved the viability of the heating system studied

Análise da influência de superfícies refletivas nas perdas de calor de sistema térmicos

The use of reflective surfaces functioning as thermal insulator has grown significantly over the years. Reflective thermal insulator are materials that have several characteristics such as low emissivity, low absorptivity and high reflectivity in the infrared spectrum. The use of these materials has grown a lot lately, since it contains several important radioactive properties that minimize the heat loss of thermal systems and cooling systems that are used to block the heat on the roof of buildings. A system made of three surfaces of 316 stainless steel mirror was built to analyze the influence of reflective surfaces as a way to reduce the heat loss and thereby conserve the energy of a thermal system. The system was analyzed both with and without the presence of vacuum, and then compared with a system that contained glass wool between the stainless steel mirror walls, since this isolator is considered resistive and also broadly used around the world in thermal systems. The reflectivity and emissivity of the surfaces used were also measured in this experiment. A type K thermocouple was fixed on the wall of the system to obtain the temperature of the stainless steel mirror surfaces and to analyze the thermal behavior of each configuration used. The results showed an efficiency of 13% when the reflective surfaces were used to minimize the heat loss of the thermal system. However, the system with vacuum had the best outcome, a 60% efficiency. Both of these were compared to the system made of glass wool as a thermal insulator

Controle inteligente de sistemas eletroidráulicos utilizando redes neurais artificiais

This work describes the development of a nonlinear control strategy for an electro-hydraulic actuated system. The system to be controlled is represented by a third order ordinary differential equation subject to a dead-zone input. The control strategy is based on a nonlinear control scheme, combined with an artificial intelligence algorithm, namely, the method of feedback linearization and an artificial neural network. It is shown that, when such a hard nonlinearity and modeling inaccuracies are considered, the nonlinear technique alone is not enough to ensure a good performance of the controller. Therefore, a compensation strategy based on artificial neural networks, which have been notoriously used in systems that require the simulation of the process of human inference, is used. The multilayer perceptron network and the radial basis functions network as well are adopted and mathematically implemented within the control law. On this basis, the compensation ability considering both networks is compared. Furthermore, the application of new intelligent control strategies for nonlinear and uncertain mechanical systems are proposed, showing that the combination of a nonlinear control methodology and artificial neural networks improves the overall control system performance. Numerical results are presented to demonstrate the efficacy of the proposed control system

Otimização do fresamento de roscas internas com a técnica de interpolação helicoidal

In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime

Metais pesados do solo após aplicação de biossólido: I - Fracionamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Anatomia comparada do lenho em raiz e caule de Lippia salviifolia Cham. (Verbenaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de manejo de águas pluviais urbanas na cidade Natal-Rio Grande do Norte

Urban stormwater can be considered as potential water resources as well as problems for the proper functioning of the manifold activities of the city, resulting from inappropriate use and occupation of the soil, usually due to poor planning of the occupation of the development areas, with little care for the environmental aspects of the drainage of surface runoff. As a basic premise, we must seek mechanisms to preserve the natural flow in all stages of development of an urban area, preserving the soil infiltration capacity in the scale of the urban area, comprising the mechanisms of natural drainage, and noting preserving natural areas of dynamic water courses, both in the main channel and in the secondary. They are challenges for a sustainable urban development in a harmonious coexistence of modern developmental, which are consistent with the authoritative economic environmental and social quality. Integrated studies involving the quantity and quality of rainwater are absolutely necessary to achieve understanding and obtaining appropriate technologies, involving both aspects of the drainage problems and aspects of use of water when subjected to an adequate management of surface runoff , for example, the accumulation of these reservoirs in detention with the possibility of use for other purposes. The purpose of this study aims to develop a computer model, adjusted to prevailing conditions of an experimental urban watershed in order to enable the implementation of management practices for water resources, hydrological simulations of quantity and, in a preliminary way, the quality of stormwater that flow to a pond located at the downstream end of the basin. To this end, we used in parallel with the distributed model SWMM data raised the basin with the highest possible resolution to allow the simulation of diffuse loads, heterogeneous characteristics of the basin both in terms of hydrological and hydraulic parameters on the use and occupation soil. The parallel work should improve the degree of understanding of the phenomena simulated in the basin as well as the activity of the calibration models, and this is supported by monitoring data acquired during the duration of the project MAPLU (Urban Stormwater Management) belonging to the network PROSAB (Research Program in Basic Sanitation) in the years 2006 to 2008

A utilização de espaços de educação não formal por professores de biologia de Natal-RN

La práctica educativa en espacios no formales es un recurso didáctico catalizador de motivación e interese, tanto para alumnos como para los profesores. El crecimiento de los espacios no formales coincide con los cambios recientes en el mundo en los campos sociales, políticos, económicos y culturales. Como una de las consecuencias de esos cambios, tenemos el crecimiento de otras instancias difusoras de conocimientos rompiendo, así, la hegemonía de la escuela. De esa forma, en este trabajo busqué investigar la frecuencia y las formas de utilización de los espacios de educación no formal por profesores de biología, de la enseñanza media, de la Ciudad de Natal (RN). Procuré también, identificar cuales son los espacios de educación no-formal que son utilizados; describir los recursos y las acciones desarrolladas en eses espacios; identificar la existencia o no de interese y la importancia que atribuyen a los espacios para la enseñanza de biología, además de divulgar los espacios utilizados como recursos didácticos. Para alcanzar estos objetivos fueron hechas observaciones de los espacios, aplicados cuestionarios y realizadas entrevistas con los profesores que realizan actividades junto a tales instituciones. Para el análisis de los datos se utilizó tanto el abordaje cuantitativo como cualitativa. Nos basamos en referenciales teóricos de autores que buscan establecer las relaciones entre diferentes modalidades de educación para mejor comprender lo que es la educación no-formal y su trayectoria histórica. Constaté que los profesores utilizan los espacios de educación no-formales, aun la cantidad de visitas al año sea reducida, en virtud de varias dificultades por ellos apuntadas, tales como el transporte, la falta de recursos financieros y de apoyo para viabilizar la visita, entre otros. Verifiqué también que los profesores demostraron un alto interese por los espacios no-formales y apuntaron como principales justificativas para considerarlos importantes para la enseñanza de la biología la posibilidad de establecer conexiones entre la teoría y la practica, además de la complementariedad

A melancolia em A Asa Esquerda do Anjo

O termo melancolia, como foi mostrado em todo o decorrer do nosso trabalho, principalmente no histórico da melancolia, é um termo, por excelência, escorregadio. De várias facetas, a melancolia pode vir a designar desde patologia, passando por inspiração filosófica, para desaguar num modo de ver a vida, como bem nos coloca Denílson Lopes em seu livro Nós os mortos: melancolia e neo Barroco (1999). A Asa Esquerda do Anjo (LUFT, 2005) é uma obra que já nos acompanha há algum tempo, pois desde a graduação estudamo-la. Em torno da protagonista, chamada de Gisela pela mãe e Guísela pela avó, circula toda a trama desse romance moderno. Tentamos visualizá-la nos três capítulos da dissertação. No primeiro, focalizamos a obra sob o aspecto de uma possível estética da melancolia, tendo por base teórica Marie Claude Lambotte (2000). Depois, elaboramos algumas linhas sobre as perdas da protagonista que do enredo emergem. Por fim, demonstramos Gisela pelo aspecto de múltiplas faces. Sabendo que uma obra literária é infinita em seus significados, cremos que A Asa Esquerda do Anjo (2005) suscita outras nuances. Isto nos dá a certeza que não é um texto acabado, finalizado. Estas nuances poderão ser estudadas, pesquisadas em uma outra oportunidade por nós ou por outros leitores de Luft. A fim de estudar a melancolia em Gisela, fundamentamos nossa dissertação com os estudos de Freud (1980) a respeito do tema. Este faz uma análise comparando a melancolia ao luto, para poder chegar, assim, a um denominador comum, já que o termo é flexível em seus significados. Freud e alguns outros autores no campo, tais como, Bataille (1980); Benjamin (1984); Erickson (2003); Klein (1971); Kristeva (1989); Lino (2004); Peres (2003); Santos (2005), Scliar (2003), pois, nos auxiliaram em nossas pesquisas e direcionaram melhor o nosso olhar sobre a obra. Acreditamos ter alcançado nosso objetivo estudar a obra A Asa Esquerda do Anjo (LLUFT, 2005) pelo foco da melancolia e suas nuances. Gisela é um personagem inacabado. Em seu discurso ela deixa isto bem nítido. Assim também, não buscamos respostas prontas, com teor de acabamento. O fechar da história está nas mãos do leitor. Mas, à medida que reiniciamos nova leitura, percebemos algo novo, que pode ser extraído da obra, do personagem, da trama. É neste abrir/fechar que a própria Gisela sussurra: Vem, vem, vem.... Ao chamar a todos nós, chama também para um novo caminhar com ela, em suas perturbações subjetivas e sua ausência de respostas. Ao aceitarmos este convite, fica difícil retornarmos pelo mesmo caminho de antes. É necessário, então, junto com este ser de papel, rever nossos passos, para, enfim, redimensionarmos nossa escrita acerca de nós mesmos e (por que não dizer?) do mundo que nos circunda

A ação pedagógica sob a perspectiva de Henri Wallon

This research was supported theory as the theory of Henri Wallon which proposes a reflection on the overall development of the child offering subsidies for a acting that values the child in its multiple dimensions. The objective is understood to seek subsidies in theory that can guide the construction of an education in the Children's activites, focused on the development aspects of cognitive, affective and motor of the child. It adopts as methodology the bibliographical revision, the intervention, observation and data collect, using as pedagogic resource playing activities in an institution of Infantile Education. The research noted the possibility of action with the concepts proposed by the Wallonian theory, furthermore, the Children's Fitness, using the recreational activities such as teaching resources boost child development. Therefore, concluded that physical education should include Child in the process of teaching-learning the full development of the child.

O ensaio jornalístico na revista Veja: uma análise multidimensional

This work has as objective generality to make a multidimensional analysis in the genre journalistic assay, communicative genre that, beyond complex and multimodal, presents hybrid characteristics. Specifically, with the intention to propose defining criteria of the cited genre, this research looks for to establish differences and similarities between the assay and other genres of the same sphere, from the description and interpretation of used multimodal resources. The analysis of the formal, schematical and rhetorical resources identified in the formatting of the journalistic assay sample that the analyses are supported in the socio-semiotic and socio-rhetorical approaches. In the formal dimension, we contemplate elements that constitute design of the text, including the forms of representation from the typography, the colors, images, as well as the aspects communicative-linguistics: the modalization indices, the communicative operators and the category time; in the schematical dimension, we present the organizational structure, considering the rhetorical movements postulates for Swales (1990) and in the rhetorical dimension we observe the categories: who writes, for who it writes, on what it writes and where writes. The adopted methodologicals postulates are of qualitative nature and the procedure is documentary, data that in we are valid them written texts of this genre as analysis object. Corpus it is constituted by a composed sample for 14 extracted texts of a set of 173 propagated journalistic assays weekly for the magazine Veja, in the period between August of 2004 and January of 2008. The analysis of the data showed that the journalistic assay, object of this study, materializes through multiple symbolic representations and multiple subjects that turn since a small episode of the daily facts of great social relevance in the present time, of historical and cultural nature, nationwide or international. Used for the first time by Montaigne in 1580, to assign, in saying of the proper author, written fast on its life and historical events, which could nor be remembered later , the term `assay' was enriched with other specifications, of form to enclose the one that if they call scientific assay today, academic assay, journalistic assay and other types of specific assays. These denominations have to see with the enrollment of the members of diverse of practices communities, in virtue of the multiplicity of activities carried through in these spheres. The conclusions the one that we arrive had been the following ones: 1. the discursive genre is not a pure entity, in virtue of the multiplicity of situations where the sorts if insert in the social actions; 2. the institutions define the configuration of one definitive genre, also its proper assignment, since for backwards of all discursive genre a voice exists to discipline - institutional voice, and in the case of the assays for analyzed us, the institutional voice if it presents, really, as a defining trace; 3. the journalistic assay, for its multiple symbolic representations, multiple subjects and for passing explicit or implicit opinions of its author, resembles it other genres, being able, therefore, to be inserted in a colony of opinionatives genres

Memórias de rios e de lagos na construção romanesca: leitura de narrativas da Amazônia paraense

This study focalizes the memoirs of rivers and of lakes in the romantic construction starting from the romances Chove nos campos de Cachoeira (1941), Marajó (1947) and Três casas e um rio (1958), of writer Dalcídio Jurandir; of the book of memoirs Marajó, minha vida (1998), of writer Dita Acatauassu; of the story "A Feiticeira", published in the book Contos Amazônicos, written by Inglês de Sousa (1883); of the short story "O Peixe", published in O carro dos milagres, (1990), of writer Benedicto Monteiro; of the oral narratives Honorato: Cobra Grande , O encanto de Honorato and A Lenda da Cobra Norato , picked up by the project named The Imaginary in the Shape of Oral Narratives of Paraense Amazon (IFNOPAP) of the Federal University of Pará. In those speeches, the voices of the memory detach the multiple functions of rivers and lakes represented as space, atmosphere, scenery, route and route, thread and fabric, re-elaborated in the narrators' memoirs, characters and narrators/character of the fiction and in popular narratives