Reusability assessment of thermoset polymeric composite wastes as reinforcement and filler replacement for polymer concrete materials

The development and applications of thermoset polymeric composites, namely fiber reinforced polymers (FRP), have shifted in the last decades more and more into the mass market [1]. Production and consume have increased tremendously mainly for the construction, transportation and automobile sectors [2, 3]. Although the many successful uses of thermoset composite materials, recycling process of byproducts and end of lifecycle products constitutes a more difficult issue. The perceived lack of recyclability of composite materials is now increasingly important and seen as a key barrier to the development or even continued used of these materials in some markets.

Saving energy in the GFRP pultrusion process

This study addresses to the optimization of pultrusion manufacturing process from the energy-consumption point of view. The die heating system of external platen heaters commonly used in the pultrusion machines is one of the components that contribute the most to the high consumption of energy of pultrusion process. Hence, instead of the conventional multi-planar heaters, a new internal die heating system that leads to minor heat losses is proposed. The effect of the number and relative position of the embedded heaters along the die is also analysed towards the setting up of the optimum arrangement that minimizes both the energy rate and consumption. Simulation and optimization processes were greatly supported by Finite Element Analysis (FEA) and calibrated with basis on the temperature profile computed through thermography imaging techniques. The main outputs of this study allow to conclude that the use of embedded cylindrical resistances instead of external planar heaters leads to drastic reductions of both the power consumption and the warm-up periods of the die heating system. For the analysed die tool and process, savings on energy consumption up to 60% and warm-up period stages less than an half hour were attained with the new internal heating system. The improvements achieved allow reducing the power requirements on pultrusion process, and thus minimize industrial costs and contribute to a more sustainable pultrusion manufacturing industry.

Mathematical modeling and simulation of heat flow through pultrusion die assembly system for thermoset composites

Pultrusion is an industrial process used to produce glass fibers reinforced polymers profiles. These materials are worldwide used when performing characteristics, such as great electrical and magnetic insulation, high strength to weight ratio, corrosion and weather resistance, long service life and minimal maintenance are required. In this study, we present the results of the modelling and simulation of heat flow through a pultrusion die by means of Finite Element Analysis (FEA). The numerical simulation was calibrated based on temperature profiles computed from thermographic measurements carried out during pultrusion manufacturing process. Obtained results have shown a maximum deviation of 7%, which is considered to be acceptable for this type of analysis, and is below to the 10% value, previously specified as maximum deviation. © 2011, Advanced Engineering Solutions.

Low-cost vibration sensors: tendencies and applications in condition monitoring of machines and structures

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Innovative manufacturing process for hybrid pultruded products based on cork and polymeric pre-shapes

Pultruded products are being targeted by a growing demand due to its excellent mechanical properties and low chemical reactivity, ensuring a low level of maintenance operations and allowing an easier assembly operation process than equivalent steel bars. In order to improve the mechanical drawing process and solve some acoustic and thermal insulation problems, pultruded pipes of glass fibre reinforced plastics (GFRF) can be filled with special products that increase their performance regarding the issues previously referred. The great challenge of this work was drawing a new equipment able to produce pultruded pipes filled with cork or polymeric pre-shaped bars as a continuous process. The project was carried out successfully and the new equipment was built and integrated in the pultrusion equipment already existing, allowing to obtain news products with higher added-value in the market, covering some needs previously identified in the field of civil construction.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Optimização do processo de pultrusão

Cada vez mais é necessário inovar e optimizar, sendo todos os processos susceptíveis a melhorias contínuas. A inovação e empenho no desenvolvimento destas novas soluções resultam do “know-how” já existente e da necessidade permanente de incrementar a produtividade com vista a uma maior competitividade, a flexibilidade e assegurar simultaneamente a qualidade dos produtos manufacturados. Com vista a incrementar a flexibilidade, torna-se necessário reduzir significativamente os tempos de “set-up” e o ”lead-time”, com vista a assegurar a entrega dos produtos de forma cada vez mais rápida. Este objectivo pode ser conseguido através de uma normalização dos elementos que constituem a linha de pultrusão. Implicitamente, observa-se um aumento de produtividade com esta medida. Neste trabalho pretende-se optimizar e flexibilizar todo o processo de pultrusão de perfis estruturais. Foram considerados todos os elementos do sistema, desde o armazém das fibras (“rack”) até à fieira de pultrusão. Foi dedicada particular atenção ao sistema de guiamento das fibras e mantas, à tina onde as fibras são impregnadas em resina, normalizadas as placas de posicionamento das fibras em direcção à entrada da fieira e revisto todo o processo de montagem e fixação da fieira, assim como o sistema de aquecimento da mesma. Com a implementação destes novos sistemas foi conseguida uma poupança significativa de tempo de “set-up” e foram claramente reduzidos os custos unitários de produção. A garantia de qualidade foi também incrementada.

PLSR Models for Mechanical Strengths of Concrete Composite Materials Reinforced with Pultrusion Wastes

In this paper, we present two Partial Least Squares Regression (PLSR) models for compressive and flexural strength responses of a concrete composite material reinforced with pultrusion wastes. The main objective is to characterize this cost-effective waste management solution for glass fiber reinforced polymer (GFRP) pultrusion wastes and end-of-life products that will lead, thereby, to a more sustainable composite materials industry. The experiments took into account formulations with the incorporation of three different weight contents of GFRP waste materials into polyester based mortars, as sand aggregate and filler replacements, two waste particle size grades and the incorporation of silane adhesion promoter into the polyester resin matrix in order to improve binder aggregates interfaces. The regression models were achieved for these data and two latent variables were identified as suitable, with a 95% confidence level. This technological option, for improving the quality of GFRP filled polymer mortars, is viable thus opening a door to selective recycling of GFRP waste and its use in the production of concrete-polymer based products. However, further and complementary studies will be necessary to confirm the technical and economic viability of the process.

Caracterização da linha editorial do Correio da Manhã através da produção noticiosa

Relatório de estágio apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Jornalismo.

Um olhar sobre a música produzida na ESML para clarinete solo e clarinete e eletrónica

O presente Projeto Artístico propõe como principal objetivo a divulgação de obras para clarinete solo e para clarinete e eletrónica produzidas no seio das classes de clarinete e composição da Escola Superior de Música de Lisboa. A preparação e montagem da obra de Edward Luiz Ayres d’Abreu, aqui realizada em estreia absoluta, pretende manter viva a continuidade de produção artística desta instituição a todos os níveis, neste caso, entre dois estudantes. Neste relatório estão registados os benefícios alcançados com o trabalho de pesquisa relacionado com os aspectos biográficos dos compositores, o contexto da criação das obras, assim como a análise e apuramento de questões interpretativas pouco utilizadas na música convencional como por exemplo, as técnicas clarinetísticas contemporâneas (glissando, frulato, vibrato, som e voz, multifónicos, micro-tons), a prática de música com eletrónica, ou a experiência inovadora da recriação musical em palco de uma partitura gráfica.

Auditoria de resultados no Ministério da Defesa Nacional, ramo Exército

Trabalho de Projeto apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Auditoria, sob orientação do Dr. Rodrigo Carvalho e co-orientação do Major de Artilharia António Rabaço

Algorithm-oriented design of efficient many-core architectures applied to dense matrix multiplication

Recent integrated circuit technologies have opened the possibility to design parallel architectures with hundreds of cores on a single chip. The design space of these parallel architectures is huge with many architectural options. Exploring the design space gets even more difficult if, beyond performance and area, we also consider extra metrics like performance and area efficiency, where the designer tries to design the architecture with the best performance per chip area and the best sustainable performance. In this paper we present an algorithm-oriented approach to design a many-core architecture. Instead of doing the design space exploration of the many core architecture based on the experimental execution results of a particular benchmark of algorithms, our approach is to make a formal analysis of the algorithms considering the main architectural aspects and to determine how each particular architectural aspect is related to the performance of the architecture when running an algorithm or set of algorithms. The architectural aspects considered include the number of cores, the local memory available in each core, the communication bandwidth between the many-core architecture and the external memory and the memory hierarchy. To exemplify the approach we did a theoretical analysis of a dense matrix multiplication algorithm and determined an equation that relates the number of execution cycles with the architectural parameters. Based on this equation a many-core architecture has been designed. The results obtained indicate that a 100 mm(2) integrated circuit design of the proposed architecture, using a 65 nm technology, is able to achieve 464 GFLOPs (double precision floating-point) for a memory bandwidth of 16 GB/s. This corresponds to a performance efficiency of 71 %. Considering a 45 nm technology, a 100 mm(2) chip attains 833 GFLOPs which corresponds to 84 % of peak performance These figures are better than those obtained by previous many-core architectures, except for the area efficiency which is limited by the lower memory bandwidth considered. The results achieved are also better than those of previous state-of-the-art many-cores architectures designed specifically to achieve high performance for matrix multiplication.

Arte rupestre do Vale do Tejo. Um ciclo artístico-cultural pré e proto-histórico

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em História, especialidade Arqueologia

Estudo do impacte da institucionalização em lares na satisfação das necessidades humanas fundamentais : perspectiva dos idosos residentes

RESUMO O envelhecimento populacional, nos países ditos “desenvolvidos”, tem sido largamente discutido a nível internacional pelas suas implicações económicas, sociais e de saúde. Uma das prioridades de intervenção face a este fenómeno é promover o aumento de pessoas idosas autónomas inseridas no seu contexto social e familiar habitual. No entanto, nem sempre esse objectivo é atingido e a muitas pessoas idosas restam os lares, ou preferem-nos, como opção de alojamento e de satisfação das necessidades humanas fundamentais. O principal objectivo deste estudo foi procurar saber se a institucionalização no lar teve impacte na satisfação habitual das necessidades humanas fundamentais das pessoas idosas. Como objectivos secundários pretendeu-se complementar esta informação com alguns aspectos relacionados com o processo de institucionalização e perceber se existem diferenças significativas no que respeita ao sexo, grupo etário ou tempo de internamento. Foram incluídas no estudo 125 pessoas com 65 ou mais anos, residentes em 15 lares com alvará de iniciativa privada, pertencentes à Região de Lisboa e Vale do Tejo, no distrito de Setúbal. Os dados foram obtidos através de um questionário construído para o efeito pela autora. As principais conclusões do estudo apontaram para um impacte negativo da institucionalização na satisfação habitual de algumas necessidades que se enquadram no plano social, nomeadamente ocupar-se para se sentir útil, recrear-se e comunicar com os semelhantes. Nas diferentes necessidades, de uma forma geral, a institucionalização teve um impacte negativo no que respeita às dimensões relacionadas com privacidade e preferência individual. Por outro lado, a institucionalização parece ter tido um impacte positivo nas dimensões relacionadas com a segurança e a acessibilidade. Não foram encontradas diferenças significativas no que respeita ao número médio de respostas favoráveis ao lar ou à casa entre os grupos etários ou quanto ao tempo de internamento. Apesar disso, encontraram-se diferenças no que respeita ao grau de satisfação em residir num lar, sendo que o nível de satisfação com a institucionalização foi maior nas pessoas que residiam no lar há mais de um ano, comparativamente às que residiam no lar há um ano ou menos.-------------------------------------------- ABSTRACT: The ageing of the population of the more developed countries has been largely discussed internationally because of its economic, social and health implications. One of the priorities of intervention facing the ageing phenomenon is to promote the increase of autonomous elderly, within their usual social and familiar environment. Not always this goal is achieved and many elderly have nursing homes as option, or voluntary choose them, for lodgement and fundamental human needs satisfaction. The main goal of this study was to search whether the nursing home institutionalization had impact in the satisfaction of fundamental human needs. As secondary goals it was established to complement this information with some aspects of the institutionalization process, as well as to analyse if there were significant differences as far as sex, age groups or institutionalization time. The study sample included 125 individuals aged 65 years or more, living in 15 private nursing homes with approved legal certification, belonging to the Lisboa and Tagus Valley Region, in the district of Setúbal. Data were collected through a questionnaire designed for this study by the author. The main conclusions of this study pointed at a negative impact of institutionalization on the usual satisfaction of some human needs included at the social field, namely occupation, recreation and communication. At another level of needs, in a general way, institutionalization had negative impact concerning privacy and individual preferences dimensions. On the other hand, institutionalization appeared to have a positive impact in safety and accessibility dimensions. It was not found significant differences between age groups or institutionalization time as far as the average positive answers in favour to nursing home or house. Notwithstanding, there were differences relating to satisfaction in living at the nursing home being the satisfaction higher in residents who lived at the nursing home for more than a year, comparatively to those that lived at the nursing home for a year or less.

Prevalência do consumo de drogas ilícitas nas Forças Armadas estudo epidemiológico num dos ramos

RESUMO: Desde 1976 que as Forças Armadas desenvolvem acções de prevenção do consumo de drogas e álcool. Na década de 80 foi criada capacidade laboratorial e deu-se início a um programa de rastreios toxicológicos. No quinquénio 2001 a 2005, as proporções de resultados positivos, associando todos os tipos de rastreio, variaram entre 3,7% e 1,5%. De Outubro de 2006 a Julho de 2007 realizou-se um estudo analítico transversal, para estimar a prevalência do consumo de drogas (canabinóides, opiáceos, cocaína e anfetaminas) num dos Ramos das Forças Armadas, com base nos despistes realizados pelo seu laboratório. Foi utilizada uma amostra aleatória simples de 1039 militares, profissionais (QP) e contratados (RC), no activo e de ambos os sexos. Desde a nomeação dos militares a rastrear, passando pela cadeia de custódia das amostras até à obtenção do resultado foi utilizado apoio informático específico. O processo de pesquisa utilizou duas técnicas de triagem por imunoensaio e tecnologia de confirmação por GC/MS, de acordo com as recomendações europeias, permitindo estabelecer uma metodologia standard para organizações e empresas. A prevalência estimada, de consumidores de droga, foi de 3,8/1.000, para um erro de 0,37%. O número de casos registado (4) não permitiu a utilização de testes estatísticos que conduzissem à identificação de características determinantes da positividade, mas não deixou de revelar aspectos inesperados. A observação de séries de casos e a realização regular de estudos epidemiológicos, que ajudem a redefinir grupos alvo e a perceber a dimensão, as determinantes e as consequências do consumo de drogas é sugerida, em conclusão.--------------------------------------- RÉSUMÉ: Depuis 1976, les Forces Armées mettent au point des mesures visant à prévenir la consommation de drogues et d'alcool. En 1980, fut créé capacité laboratoriel et ont ensuite commencé un programme de dépistage toxicologique. Au cours des cinq années allant de 2001 à 2005, les proportions de consommateurs, impliquant tous les types de dépistage, allaient de 3,7% à 1,5 %. D'octobre 2006 à juillet 2007, une étude analytique transversale a été organisée pour évaluer la prévalence de l’usage de drogues (cannabis, opiacés, cocaïne et amphétamines) dans une branche de les Forces Armées, basée sur les dépistages faites par un laboratoire militaire, à l'aide d'un échantillon aléatoire de 1039 militaires, professionnels (QP) et sous contract (RC), à l’actif et des deux sexes. Tout au long du procès, de la nomination des donneurs, en passant par la chaine de garde des échantillons, jusqu’à obtention du résultat, il fut employé un appui informatique sécurisé. Le processus de recherche employa deux techniques de tri par imunoessay et la technologie de confirmation GC/MS, selon les recommandations européennes, permettant d'établir une méthodologie standard pour les organisations et les entreprises. La prévalence estimée fut de 3,8/1.000 pour une marge d’erreur de 0,37%. Le nombre de cas enregistrés (4) n'autorise pas l'utilisation de testes statistiques de menant à l'identification de caractéristiques déterminant de la positivité, mais il permet à révéler des aspects inattendus. L'observation de séries de cas et la tenue régulière d’études épidémiologiques, qui contribuent à redéfinir les groupes cibles et de comprendre l'ampleur, les déterminants et les conséquences de l'usage de drogues, est suggéré, en fin de compte.--------------------------------------- ABSTRACT: Since 1976, the Armed Forces, have been developing measures to prevent the use of drugs and alcohol. In 1980, was created laboratory facility which then started a program of toxicological screenings. In the five years running from 2001 to 2005, the proportions of consumers, involving all types of screening, ranged from 3,7% to 1,5%. From October 2006 to July 2007, a cross-sectional study was held to estimate the prevalence of drug use (cannabinoids, opiates, cocaine and amphetamines) in one branch of the Portuguese Armed Forces, based on laboratory screenings, using a random sample of 1039 military, professional (QP) and enlisted (RC), active-duty and of both sexes. Specific computer support was used all the way, from the appointment, including the chain of custody of samples, to the obtaining of the result. The process of search used two techniques for sorting by immunoassay and confirmation technology GC/MS, according to European recommendations, allowing to establish a standard methodology for organizations and companies. The estimated prevalence of drug users was 3.8/1.000 for a 0.37% error (95% confidence interval). The number of cases registered (4) does not permit use of statistical testing leading to the identification of characteristics weighing in the establishing to extrapolate for the population, but it allows revealing unexpected aspects. The observation of series of cases and the regular holding of epidemiological studies, which help redefine target groups and to understand the extent, the determinants and consequences of drug use, is suggested, in conclusion.