Viabilidade do aproveitamento de resíduos de madeira para produção de móveis

The need to use waste from wood processing industry grows due to environmental demands imposed by laws, so like the need to introduce more competitive products in the market (it means better quality and acceptable cost) who must submit by the rational use of raw material, usually turning waste to sub products, what adds higher value for that. To this research, specific case from Ribon Company, located on Camaçari, Bahia-Brazil, has been studied. It is a treated wood producer. Bulk of monthly wood logs there is 70 m3. Its yield is 71,43%, where bulk of generated waste is monthly 20m3. As an exploitation way from generated waste, it has been suggested some options like: erosion protection to specific areas, a wildlife shelter as an henhouse etc, recreational articles, coal, linings, treadmills. However this research will give focus to the furniture design made of waste. As a conclusion, there is very much need to assign new utilizations to that sub used materials, since there is significant amount to increase company���s productive yield

Study of thermal decomposition of ignition temperature of bagasse, coal and their blends

In Brazil, due to its availability, sugar cane bagasse has a high potential for power generation. The knowledge of ignition behavior, as well as the knowledge of the chemical kinetics, in of fuels combustion process is important features in boilers projects and in the stability of the combustion process control. The aim of this study is to investigate the thermal behavior of sugar cane bagasse, coal and their blends. The methodology proposed by Tognotti et al. (1985) was applied to determine the ignition temperature for all samples. Ignition temperatures were 256oC for neat bagasse and 427oC for neat coal, and 275oC for both blends (50-50% and 25-75%). The ModelFree Kinetics was applied to determine the apparent activation energy (Eα) of the thermal decomposition of sugar cane bagasse. For the two major events of mass loss of bagasse which correspond to the thermal decomposition of organic matter (mainly hemicellulose, cellulose and lignin), average values of Eα were obtained for both combustion and pyrolysis processes. In synthetic air atmosphere, the Eα were 170.8±26.3 kJ⋅mol-1 and 277.8±58.6 kJ⋅mol-1, while in nitrogen atmosphere, the Eα were 185.0 ± 11.4 kJ⋅mol-1 and 82.1±44.4 kJ⋅mol-1. The results obtained can be explained by synergistic effects when both bagasse and coal were blended, changing the fuel reactivity.

Standard oil company: um reflexo da industrialização americana

A Standard Oil Company foi resultado da forte industrialização que ocorreu nos Estados Unidos após a Guerra de Secessão. Anterior ao conflito, os americanos estavam divididos entre ser tornarem um país exportador de matérias primas ou serem industrializados. Mesmo que ambas as estruturas econômicas foram aplicadas concomitantemente, trazendo recursos financeiros para a Nação, os estados do Norte acabaram vencendo a guerra e incentivaram a expansão industrial. O reflexo desse processo foi notado pelo empresário J.D. Rockefeller que inicia sua empresa baseada na exploração de petróleo, a Standard Oil Company. Utilizando-se de métodos eficientes, inovadores e eficazes, proporcionou um aumento na produção petrolífera de forma exorbitante, podendo manter altos níveis de lucro, mesmo que a preços razoáveis ao consumidor. O impacto da organização industrial e as estratégias encontradas pelo monopólio marcaram profundamente a economia americana. Mesmo sendo um tema de história econômica, no decorrer deste trabalho utilizaremos aspectos sociológicos, biográficos e estatísticos para compreendermos de que forma a Standard Oil Company representa a essência do espírito capitalista da instituição americana

A Vale em Moçambique: uma etnografia das relações entre brasileiros e moçambicanos no cotidiano dos megaprojetos

Pós-graduação em Ciências Sociais - FCLAR

Relationships between company size, types of production system and supply chain management: evidence from electro-electronics sector in Brazil

Purpose – The purpose of this paper is to investigate how company size and the type of production system affect the adoption of supply chain management (SCM) practices in companies in the electro‐electronics sector in Brazil. Design/methodology/approach – An e‐mail survey of 107 companies associated with the Brazilian Electrical and Electronics Industry Association (ABINEE) was conducted. Statistical techniques were employed to verify the adoption of SCM practices according to the size of the company and its production system. Findings – The major results indicate that the larger the size of the company, the higher the level of adoption of SCM practices, and that the choice of SCM practices depends upon the type of production system implemented. Practical implications – The implications of this study are useful to top management leaders of small and medium‐sized enterprises since the findings enable them to identify the most common practices adopted by either large‐, medium‐ or small‐sized companies in order to benchmark the level of adoption of SCM practices. Production managers can also benefit from this study by identifying the SCM practices that may support certain production systems.

Greening a Brazilian cotton seed processing company: from challenges to strategic opportunities

This paper aims to shed light on a current and important theme that has been gaining increasing importance for governments, society and companies: the greening of agricultural companies in developing countries. The research objective is to classify a Brazilian cotton seed processing company in the evolutionary stages of environmental management: reactive, preventive or proactive. Design/methodology/approach– A case study was conducted in a Brazilian cotton seed processing company.Findings– The main results are: the studied company is positioned in the preventive stage of environmental management; this company is investing in operational green practices; environmental management in this company is motivated by various factors aiming at an increased competitive advantage. Finally, it can be concluded that this company is looking for green opportunities towards the proactive environmental management stage.

Acumulação por espoliação: o setor de mineração em Moçambique : o caso da mina de carvão da Vale S. A

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geoquímica de radionuclídeos naturais e biomonitoramento em área de mineração de carvão no sul do Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Rock Hill Printing and Finishing Company History - Accession 207 - M91 (177)

This collection consists of a special edition of The Evening Herald (Rock Hill, SC newspaper) which included a section devoted to the history of the company.

Rock Hill Hardware Company Records - Accession 220

The Rock Hill Hardware Company was organized on June 4, 1893 by A.R. Smith and John Gelzer, A.A. Barron and his sons R.E. and W.L. bought Smith out in 1896 and by 1907 had acquired the whole firm. The Barron family owned and operated it until it closed in 1978. The collection consists of a 1906 ledger, financial records, a photograph, a seed license, World War II ration booklets, and newspaper clippings.

Diatoms and Tonsteins as Paleoenvironrnental and Paleodepositional Indicators in a Miocene Coal Bed, Costa Rica

Fresh-water diatoms are present in coal, and tonsteins (altered volcanic ash) are interbedded with the coal, in the Miocene Venado Formation on the southwest margin of the Limon Basin, in Provincia Alajuela, northern Costa Rica. The Venado Formation is composed of more than 300 m of mudstone, siltstone, sandstone, limestone, volcaniclastics, and coal beds. The coal beds are of unknown lateral extent and mainly occur in the middle part of the formation. The Pataste coal bed occurs near the middle of the formation and is divided into three parts by two tonstein layers. The abundance of biogenic opaline material (diatoms) in the coal is believed to be a direct response to an influx of silica from volcanic tuffs that Later altered to the tonsteins. Diatoms are a useful microscopic tool for identifying the depositional environments of the Pataste coal deposit. The diatoms identified include Aulacosira ambigua, Pinnularia sp., Eunotia spp., and Achnanthes exigua, among others. The abundance of Aulacosira arnbigua suggests that an open-water lacustrine environment was present locally. Achnanthes exigua and the remaining diatom species are benthic forms that lived in shallow fresh-water to slightly acidic swamp environments. The different types of diatoms found in the coal indicate that swamp environments were intermixed with lacustrine environments during the formation of the peat deposit or that the coal records environmental changes through time.

Evaluation of the Sensitivity of Freshwater Organisms Used in Toxicity Tests of Wastewater from Explosives Company

Explosives industries are a source of toxic discharge. The aim of this study was to compare organisms sensitivity (Daphnia similis, Danio rerio, Escherichia coli and Pseudomonas putida) in detecting acute toxicity in wastewater from two explosives, 2,4,6-TNT (TNT) and nitrocellulose. The samples were collected from an explosives company in the Paraiba Valley, So Paulo, Brazil. The effluents from TNT and nitrocellulose production were very toxic for tested organisms. Statistical tests indicated that D. similis and D. rerio were the most sensitive organisms for toxicity detection in effluents from 2,4,6-TNT and nitrocellulose production. The P. putida bacteria was the organism considered the least sensitive in indicating toxicity in effluents from nitrocellulose.

Combustion of coal, bagasse and blends thereof Part I: Emissions from batch combustion of fixed beds of fuels

Batch combustion of fixed beds of coal, bagasse and blends thereof took place in a pre-heated two-stage electric laboratory furnace, under high-heating rates. The average input fuel/air equivalence ratios were similar for all fuels. The primary and secondary furnace temperatures were varied from 800 degrees C to 1000 degrees C. The effects of fuel blending, combustion staging, and operating furnace temperatures on the emissions from the two fuels were assessed. Furnace effluents were analyzed for carbon dioxide and for products of incomplete combustion (PIC) including CO, volatile and semi-volatile hydrocarbons, as well as particulate matter. Results showed that whereas CO2 was generated during both the observed sequential volatile matter and char combustion phases of the fuels, PICs were only generated during the volatile matter combustion phase. CO2 emissions were the highest from coal, whereas CO and other PIC emissions were the highest from bagasse. Under this particular combustion configuration, combustion of the volatile matter of the blends resulted in lower yields of PIC, than combustion of the volatiles of the neat fuels. Though CO and unburned hydrocarbons from coal as well as from the blends did not exhibit a clear trend with furnace temperature, such emissions from bagasse clearly increased with temperature. The presence of the secondary furnace (afterburner) typically reduced PIC, by promoting further oxidation of the primary furnace effluents. (C) 2012 Elsevier Ltd. All rights reserved.

Soil compressibility and least limiting water range of a constructed soil under cover crops after coal mining in Southern Brazil

The use of cover crops affects the support capacity of soil and least limiting water range to crop growth. The objective of this study was to quantify preconsolidation pressure (sigma(p)), compression index (CI) and least limiting water range (LLWR) of a reclaimed coal mining soil under different cover crops, in Candiota, RS, Brazil. In the experiment, with randomized blocks design and four replicates, the following cover crops (treatments) were evaluated: Hemarthria altissima (Poir.) Stapf & C.E. Hubbard, treatment 1 (T1), Paspalum notatum Flugge, treatment 4 (T4), Cynodon dactilon (L) Pers., treatment 5 (T5), control Brachiaria brizantha (Hochst.) Stapf, treatment 7 (T7) and without cover crop treatment 8 (reference treatment, T8). Soil compression and least limiting water range were evaluated with undisturbed samples at a depth of 0.00-0.05 m. In order to evaluate parameters of soil compressibility, the soil samples were saturated with water and subjected to -10 kPa matric potential and then submitted to a uniaxial compression test under the following pressures: 25, 50, 100, 200, 400, 800 and 1600 kPa. Cover crops decreased the preconsolidation pressure of constructed soils after coal mining and the greatest soil reclamation was obtained with the H. altissima cover crop, where the lowest degree of soil compactness and soil load capacity were observed. Soils cultivated under H. altissima or B. brizantha presented the highest least limiting water range and these two cover crops generated similar soil critical bulk density obtained by least limiting water range and soil load support capacity. (C) 2012 Elsevier B.V. All rights reserved.

Combustion of coal, bagasse and blends thereof Part II: Speciation of PAH emissions

This work reports on emissions of unburned hydrocarbon species from batch combustion of fixed beds of coal, sugar-cane bagasse, and blends thereof in a pre-heated two-stage laboratory furnace operated in the temperature range of 800-1000 degrees C. The effects of fuel blending, combustion staging, and operating furnace temperatures on emissions of pollutants were assessed. Furnace effluents were analyzed for products of incomplete combustion (PICs) including CO, volatile and semi-volatile hydrocarbons, and particulate matter, as has been reported in Ref. [1]. Emitted unburned hydrocarbons include traces of potentially health-hazardous Polycyclic Aromatic Hydrocarbons (PAHs), which are the focus of this work. Under the batch combustion conditions implemented herein, PAH were only generated during the volatile combustion phase of the fuels. The most prevalent species were in descending order: naphthalene, acenaphthylene, phenanthrene, fluoranthene, pyrene, dibenzofuran, benzofuran, byphenyl, fluorene, 9H-fluoren-9-one, acephenantrylene, benzo[b] fluoranthene, 1-methyl-naphthalene; 2-methyl-naphthalene, benz[a] anthracene and benzo[a] pyrene. PAH yields were the highest from combustion of neat bagasse. Combustion of the blends resulted in lower yields of PAH, than combustion of either of their neat fuel constituents. Increasing the furnace operating temperature enhanced the PAH emissions from bagasse, but had little effect on those from the coal or from the blends. Flue gas treatment in a secondary-stage furnace, upon with additional air, typically reduced PAH yields by promoting oxidation of the primary-stage furnace effluents. (C) 2011 Elsevier Ltd. All rights reserved.